Oxidation of chlorophenols in soil at natural pH by catalyzed hydrogen peroxide: the effect of soil organic matter.

This investigation reports on the effects of soil organic matter (SOM) during the oxidation of chlorophenols with Fe2+-catalyzed H2O2 (Fenton oxidation) system. The soil pH was 7.1 and was not altered. Sorption experiments of soil pre-treated under various oxidation conditions were performed. Concentrations of organic matter in the liquid phase and soil before and after oxidation were analyzed. The results were correlated to the observation in batch Fenton oxidation tests. They showed that the oxidation of chlorophenols at natural soil pH depended on the dose of H2O2 and Fe2+. The soil organic content did not vary significantly after various Fenton treatments, while the sorption of chlorophenols was 10-25% less by the oxidation. The concentration of chlorophenols in the liquid phase exhibited a "decrease and rebound" phenomenon in the batch Fenton oxidation tests. It appeared that the oxidation of SOM resulted in the release of sorbed chlorophenols which were then oxidized by the excess H2O2. An "oxidation-desorption-oxidation" scheme was proposed to describe one of the interaction mechanisms among the oxidant, SOM, and chlorophenols during oxidation.     

Applicability of Fenton and H2O2/UV reactions in the treatment of tannery wastewaters

In this paper we evaluated the H2O2/UV and the Fenton's oxidation processes for the treatment of tannery wastewater under different experimental conditions. Efficiencies were judged by the amounts of organic substances degraded or eliminated under these treatment techniques. Daphnia magna and Vibrio fischeri were used to monitor toxicity. Organic compounds contained in the untreated and treated tannery wastewater were determined and identified using substance specific techniques. Gas chromatography-mass spectrometry (GC-MS) in positive electron impact (EI(+)) mode was applied to determine volatile organics. Atmospheric pressure ionization (API) mass (MS) and tandem mass spectrometry (MS-MS) coupled with flow injection analysis (FIA) or liquid chromatography (LC) were used to detect or identify polar organic pollutants. The experimental results indicated that both oxidation processes--H2O2/UV at pH 3 and Fenton at pH 3.5--are able to reduce TOC content by mineralisation of the organic compounds.     

Arsenic(III) and iron(II) co-oxidation by oxygen and hydrogen peroxide: Divergent reactions in the presence of organic ligands

Iron-catalyzed oxidation of As(III) to As(V) can be highly effective for toxic arsenic removal via Fenton reaction and Fe(II) oxygenation. However, the contribution of ubiquitous organic ligands is poorly understood, despite its significant role in redox chemistry of arsenic in natural and engineered systems. In this work, selected naturally occurring organic ligands and synthetic ligands in co-oxidation of Fe(II) and As(III) were examined as a function of pH, Fe(II), H₂O₂, and radical scavengers (methanol and 2-propanol) concentration. As(III) was not measurably oxidised in the presence of excess ethylenediaminetetraacetic acid (EDTA) (i.e. Fe(II):EDTA < 1:1), contrasting with the rapid oxidation of Fe(II) by O₂ and H₂O₂ at neutral pH under the same conditions. However, partial oxidation of As(III) was observed at a 2:1 ratio of Fe(II):EDTA. Rapid Fe(II) oxidation in the presence of organic ligands did not necessarily result in the coupled As(III) oxidation. Organic ligands act as both iron speciation regulators and radicals scavengers. Further quenching experiments suggested both hydroxyl radicals and high-valent Fe species contributed to As(III) oxidation. The present findings are significant for the better understanding of aquatic redox chemistry of iron and arsenic in the environment and for optimization of iron-catalyzed arsenic remediation technology.     

Influence of pH and ozone dose on the content and structure of haloacetic acid precursors in groundwater

This study investigated the effects of pH (6-10) and ozone dose [0.4-3.0?mg O(3)/mg dissolved organic carbon (DOC)] on the content and structure of haloacetic acid (HAA) precursors in groundwater rich in natural organic matter (NOM; DOC 9.85?±?0.18?mg/L) during drinking water treatment. The raw water was ozonated in a 2 L glass column. NOM fractionation was carried out using XAD resins. HAA formation potential (HAAFP) was determined according to standard EPA Method 552. NOM characterization revealed it is mostly hydrophobic (65?% fulvic and 14?% humic acids). Hydrophobic NOM significantly influences HAA formation, as confirmed by the high HAAFP (309?±?15?μg/L). Ozonation at pH?6-10 led to changes in NOM structure, i.e. complete humic acid oxidation, and increased the hydrophilic NOM fraction content (65-90?% achieved using 3.0?mg O(3)/mg DOC). The highest degree of NOM oxidation and HAA precursor removal was achieved at pH?10 (up to 68?% HAAFP). Ozonation pH influenced the distribution of HAA precursor content, as increasing the pH from 6 to 10 increased the reactivity of the hydrophilic fraction, with the HAAFP increasing from 19.1?±?6.0?μg/mg DOC in raw water to 152?±?8?μg/mg DOC in ozonated water. The degree of HAA precursor removal depends on the dominant oxidation mechanism, which is related to the applied ozone dose and the pH of the oxidation process. Ozonation at pH?10 favours the mechanism of radical NOM oxidation and was the most effective for HAAFP reduction, with the efficacy of the process improving with increasing ozone dose.     

Ferrate(VI): green chemistry oxidant for degradation of cationic surfactant

Iron in its familiar form exists in the +2 and +3 oxidation states, however, higher oxidation state of iron +6, ferrate(VI) (Fe(VI)O(4)(2-)) can be obtained. The high oxidation power of ferrate(VI) can be utilized in developing cleaner ("greener") technology for remediation processes. This paper demonstrates the unique property of ferrate(VI) to degrade almost completely the cationic surfactant, cetylpyridinium chloride (C(5)H(5)N(+)(CH(2))(15)CH(3).H(2)O Cl(-), CPC). The Rate law for the oxidation of CPC by ferrate(VI) at pH 9.2 was found to be: -d[Fe(VI)]/dt = k[Fe(VI)][CPC](2). Ferrate(VI) oxidizes CPC within minutes and molar consumption of ferrate(VI) was nearly equal to the oxidized CPC. The decrease in total organic carbon (TOC) from CPC was more than 95%; suggesting mineralization of CPC to carbon dioxide. Ammonium ion was the other product of the oxidation. This is the first report in which Fe(VI)O(4)(2-) ion opens the pyridine ring and mineralizes the aliphatic chain of the organic molecule giving inorganic ions.     

Evaluation of different electrochemical methods on the oxidation and degradation of Reactive Blue 4 in aqueous solution

The oxidation of a reactive dye, Reactive Blue 4, RB4, (C.I. 61205), widely used in the textile industries to color natural fibers, was studied by electrochemical techniques. The oxidation on glassy carbon electrode and reticulated vitreous carbon electrode occurs in only one step at 2.0 < pH < 12 involving a two-electron transfer to the amine group leading to the imide derivative. Dye solution was not decolorized effectively in this electrolysis process. Nevertheless, the oxidation of this dye on Ti/SnO2/SbO(x) (3% mol)/RuO2 (1% mol) electrode showed 100% of decolorization and 60% of total organic carbon removal in Na2SO4 0.2 M at pH 2.2 and potential of +2.4V. Experiments on degradation photoelectrocatalytic were also carried out for RB4 degradation in Na2SO4 0.1 M, pH 12, using a Ti/TiO2 photoanode biased at +1.0 V and UV light. After 1h of electrolysis the results indicated total color removal and 37% of mineralization.     

An investigation into reservoir NOM reduction by UV photolysis and advanced oxidation processes

A comparison of four treatment technologies for reduction of natural organic matter (NOM) in a reservoir water was made. The work presented here is a laboratory based evaluation of NOM treatment by UV-C photolysis, UV/H(2)O(2), Fenton's reagent (FR) and photo-Fenton's reagent (PFR). The work investigated ways of reducing the organic load on water treatment works (WTWs) with a view to treating 'in-reservoir' or 'in-pipe' before the water reaches the WTW. The efficiency of each process in terms of NOM removal was determined by measuring UV absorbance at 254 nm (UV(254)) and dissolved organic carbon (DOC). In terms of DOC reduction PFR was the most effective (88% removal after 1 min) however there were interferences when measuring UV(254) which was reduced to a lesser extent (31% after 1 min). In the literature, pH 3 is reported to be the optimal pH for oxidation with FR but here the reduction of UV(254) and DOC was found to be insensitive to pH in the range 3-7. The treatment that was identified as the most effective in terms of NOM reduction and cost effectiveness was PFR.     

Heterogeneous and homogeneous catalytic ozonation of benzothiazole promoted by activated carbon: kinetic approach

Ozone oxidation combined with activated carbon adsorption (O(3)/AC) has recently started to be developed as a single process for water and wastewater treatment. While a number of aspects of aqueous ozone decomposition are well understood, the importance and relationship between aqueous ozone decomposition and organic contaminant degradation in the presence of activated carbon is still not clear. This study focuses on determining the contribution of homogeneous and heterogeneous reactions to organic contaminants removal in O(3)/AC system. Benzothiazole (BT) was selected as a target organic pollutant due to its environmental concern. A reactor system based on a differential circular flow reactor composed by a 19 cm(3) activated carbon fixed bed column and 1 dm(3) storage tank was used. Ozone was produced from pure and dry oxygen using an Ozocav ozone generator rated at 5 g O(3)h(-1). Experimental results show that BT removal rate was proportional to activated carbon dosage. Activated carbon surface contribution to BT oxidation reactions with ozone, increased with pH in absence of radical scavengers. The radical reaction contribution within the pH range 2-11 accounted for 67-83% for BT removal in O(3)/AC simultaneous treatment. Results suggest that at pH higher than the pH of the point of zero charge of the activated carbon dissociated acid groups such as carboxylic acid anhydrides and carboxylic acids present on activated carbon surface could be responsible for the observed increase in the ozone decomposition reaction rate. A simplified mechanism and a kinetic scheme representing the contribution of homogeneous and heterogeneous reactions on BT ozonation in the presence of activated carbon is proposed.     

焦化废水泡沫分离液的Fenton催化氧化预处理

以焦化废水处理过程产生的泡沫分离液为研究对象,对其进行Fenton催化氧化处理实验,考察H₂O₂用量、Fe²⁺浓度、pH和反应时间4个因素对处理效果的影响,并结合GC/MS方法比较处理前后泡沫分离液中有机物的种类及其生物降解性的变化。结果表明,采用［H₂O₂］=100 mmol/L、［Fe²⁺］=100 mg/L、pH=3、反应时间为30 min的Fenton催化氧化反应条件,可以使分离液的COD去除率达到68%以上;经Fenton处理后,分离液的B/C值由0.12提高至0.38,生物降解性明显改善;通过GC/MS的分析,基本明确分离液中含有的有机物主要为酚、胺、腈、酯类有机物及喹啉、吡啶等杂环化合物,大多数属于难降解且生物毒性较强的有机物。针对这些复杂组分共存的泡沫分离液,利用Fenton试剂较强的氧化能力能够将其含有的有毒/难降解有机物转化为低毒或无毒的小分子有机物,为其后续的生物处理创造良好的条件。     

Transformation characteristics of refractory pollutants in plugboard wastewater by an optimal electrocoagulation and electro-Fenton process

The treatment of the plugboard wastewater was performed by an optimal electrocoagulation and electro-Fenton. The organic components with suspended fractions accounting for 30% COD were preferably removed via electrocoagulation at initial 5 min. In contrast, the removal efficiency was increased to 76% with the addition of H(2)O(2). The electrogenerated Fe(2+) reacts with H(2)O(2) and leads to the generation of (·)OH, which is responsible for the higher COD removal. However, overdosage H(2)O(2) will consume (·)OH generated in the electro-Fenton process and lead to the low COD removal. The COD removal efficiency decreased with the increased pH. The concentration of Fe(2+) ions was dependent on the solution pH, H(2)O(2) dosage and current density. The changes of organic characteristics in coagulation and oxidation process were differenced and evaluated using gel permeation chromatography, fluorescence excitation-emission scans and Fourier transform infrared spectroscopy. The fraction of the wastewater with aromatic structure and large molecular weight was decomposed into aliphatic structure and small molecular weight fraction in the electro-Fenton process.     

pH-Dependent fate and transport of NTA-complexed cobalt through undisturbed cores of fractured shale saprolite

The codisposal of toxic metals and radionuclides with organic chelating agents has been implicated in the facilitated transport of the inorganic contaminants away from primary waste disposal areas. We investigated the transport of Co(II)NTA through undisturbed cores of fractured shale saprolite. Experiments were conducted across the pH range 4 to 8 by collecting cores from different locations within the weathering profile. Aqueous complexation, adsorption, dissociation and oxidation reactions influenced Co(II)NTA transport. The suite of reaction products identified in column effluent varied with experimental pH. At low pH and in the presence of abundant exchangeable aluminum, Co transport occurred predominantly as the Co2+ ion. At higher pH, Co was transported primarily as Co(II)NTA and the Co(III) species Co(III)(HNTA)2 and Co(III)(IDA)2. The formation of the geochemical oxidation products (Co(III) species) has far reaching implications as these compounds are kinetically and thermodynamically stable, are transported more rapidly than Co(II)NTA, and are resistant to biodegradation. These results demonstrate that natural minerals, in the physical structure encountered naturally, can be more important in the formation of mobile, stable contaminant forms than they can be for the retardation and dissociation of the contaminants.     

Degradation of tetracycline at a boron-doped diamond anode: influence of initial pH,applied current intensity and electrolyte

The anodic oxidation of tetracycline was performed in an up-flow reactor, operating in batch mode with recirculation, using as anode a boron-doped diamond electrode. The influence on the degradation rate of solution initial pH (2 to 12), applied current intensity (25 to 300 A m^?2) and type of electrolyte (sodium sulphate or sodium chloride) were investigated. For the assays run at equal current density, with sodium sulphate as electrolyte, the solution’s initial pH of 2 presented the highest absorbance and chemical oxygen demand removals. Regarding the influence of current density, for equal charge passed, the organic load removal rate decreased with the increase in applied current. When sodium sulphate was used as an electrolyte, high-performance liquid chromatography (HPLC) results have shown an almost complete removal of tetracycline after a 2-h assay. HPLC results have also shown the presence of oxamic acid as one of the intermediates of tetracycline anodic oxidation. The complete removal of tetracycline was much faster in the presence of chloride ions that promoted the complete degradation of this antibiotic in 30 min. However, in the presence of chloride ions, the tetracycline mineralization is slower, as observed by the lower organic carbon removal rate when compared to that of the tetracycline degradation in the presence of sulphate.     

Experimental in situ chemical peroxidation of atrazine in contaminated soil

Lab-scale experiments of in situ chemical oxidation (ISCO), were performed on soil contaminated with 100 mg kg(-1) of atrazine (CIET). The oxidant used was hydrogen peroxide catalysed by naturally occurring minerals or by soluble Fe(II) sulphate, added in aqueous solution. The oxidation conditions were: CIET:H2O2=1:1100, 2 PV or 3 PV reaction volume, Fe(II):H2O2=0, 1:22, 1:11. Stabilized (with KH2PO4 at a concentration of 16 g l(-1)) or non-stabilized hydrogen peroxide was used. The pH of the reagents was adjusted to pH=1 with sulphuric acid, or was not altered. Results showed that the addition of soluble Fe(II) increased the temperature of the soil slurry and the use of stabilized hydrogen peroxide resulted in a lower heat generation. The treatment reduced the COD of the soil of about 40%, pH was lowered and natural organic matter became less hydrophobic. The highest atrazine conversion (89%) was obtained in the conditions: 3 PV, Fe(II):H2O2=1:11 with stabilized hydrogen peroxide added in two steps. The stabilizer only increased H2O2 life-time significantly when soluble Fe(II) was added. Results indicate as preferential degradation pathway of atrazine in soil dechlorination instead of dealkylation.     

A comparative study of the removal of 3-indolebutyric acid using advanced oxidation processes

In this study, advanced oxidation technologies, namely Fenton Process (FP), Fenton-Like Process (FLP), ozonation (O3) and O3/H2O2 processes, were applied to synthetic wastewater containing 3-indolebutyric acid (IBA). The effectiveness of each process was investigated at different pH values, Fe(+2), Fe(+3), O3 and H2O2 concentrations with respect to the removal efficiencies for chemical oxygen demand (COD) and total organic carbon (TOC). The best removal efficiencies were seen at pH 3 and 2 mM Fe concentration in both FP and FLP, in which the optimum H2O2 concentrations were 6 mM for FP and 10 mM for FLP. Optimum process conditions were pH 12 for the O3 process, pH 9 for the O3/H2O2 process and 1:1 O3/H2O2 molar ratio. The highest COD removal efficiency was 86 percent, obtained in the O3/H2O2 process and the highest TOC removal efficiency was obtained at 77 percent in the FP.     

Application of magnetite-activated persulfate oxidation for the degradation of PAHs in contaminated soils

In this study, feasibility of magnetite-activated persulfate oxidation (AP) was evaluated for the degradation of polycyclic aromatic hydrocarbons (PAHs) in batch slurry system. Persulfate oxidation activated with soluble Fe(II) (FP) or without activation (SP) was also tested. Kinetic oxidation of PAHs was tracked in spiked sand and in aged PAH contaminated soils at circumneutral pH. Quartz sand was spiked with: (i) single model pollutant (fluorenone) and (ii) organic extract isolated from two PAH contaminated soils (H and NM sampled from ancient coking plants) and was subjected to oxidation. Oxidation was also performed on real H and NM soils with and without an extraction pretreatment. Results indicate that oxidation of fluorenone resulted in its complete degradation by AP while abatement was very low (<20%) by SP or FP. In soil extracts spiked on sand, significant degradation of 16 PAHs was observed by AP (70-80%) in 1 week as compared to only 15% by SP or FP systems. But no PAH abatement was observed in real soils whatever the treatment used (AP, FP or SP). Then soils were subjected to an extraction pretreatment but without isolation of organic extract from soil. Oxidation of this pretreated soil showed significant abatement of PAHs by AP. On the other hand, very low degradation was achieved by FP or SP. Selective degradation of PAHs was observed by AP with lower degradation efficiency towards high molecular weight PAHs. Analyses revealed that no by-products were formed during oxidation. The results of this study demonstrate that magnetite can activate persulfate at circumneutral pH for an effective degradation of PAHs in soils. However, availability of PAHs and soil matrix were found to be the most critical factors for degradation efficiency.     

Heterogeneous Fenton oxidation of Direct Black G in dye effluent using functional kaolin-supported nanoscale zero iron

This study investigated kaolin-supported nanoscale zero-valent iron (nZVI/K) as a heterogeneous Fenton-like catalyst for the adsorption and oxidation of an azo dye, Direct Black G (DBG). New findings suggest that kaolin as a support material not only reduced the aggregation of nanoscale zero-valent iron (nZVI) but also improved the adsorption of DBG. It consequently improved Fenton oxidation by increasing the local concentration of DBG in the vicinity of nZVI. This was confirmed by scanning electron microscopy and X-ray diffraction for the surface morphology of nZVI/K before and after the Fenton-like reaction. Furthermore, nZVI/K proved to be a catalyst for the heterogeneous Fenton-like oxidation of the DBG process in the neutral pH range. More than 87.22 % of DBG was degraded, and 54.60 % of total organic carbon was removed in the optimal conditions: 0.6 g/L dosage of nZVI/K, 33 mM H₂O₂, 100 mg/L initial DBG concentration, temperature of 303 K and pH of 7.06. Finally, it was demonstrated that nZVI/K removed DBG from dye wastewater through the processes of adsorption and oxidation.     

The use of elemental sulphur as organic alternative to control pH during composting of olive mill wastes

High values of pH may represent a limitation for the agricultural use of the composts, not only when used as soil-less substrate but also as soil amendment in high pH soils. The addition of elemental S during the maturation phase of the composting process was evaluated as suitable method to reduce pH of the composts under the organic agriculture regulations. A compost prepared with two phase olive mill waste (OMW) and sheep litter (SL) was used to study the effect of elemental sulphur addition on the pH of the composting mixture. Initially, different bench scale experiments were designed in order to study the influence of moisture, sulphur concentration, and incubation temperature on the sulphur oxidation rate and thus on the pH of the compost. A concentration of 0.5% in sulphur (dry weight basis) and moisture of 40% were proposed as the optimum conditions to decrease the compost pH by 1.1 units without increasing in EC to levels that may suppose a limitation for its agricultural use. Finally, these optimum experimental conditions found at bench scale were tested at full scale in a commercial composting plant treating the same organic materials by windrowing. The pH values of the composting mixture were reduced by one unit after 2 weeks following the addition of elemental S causing no negative effects on the final compost quality.     

Kinetics of the reduction of hexavalent chromium with the brown seaweed Ecklonia biomass

The dead biomass of the brown seaweed, Ecklonia sp., is capable of reducing toxic Cr(VI) into less toxic or nontoxic Cr(III). However, little is known about the mechanism of Cr(VI) reduction by the biomass. The objective of this work was to develop a kinetic model for Cr(VI) biosorption, for supporting our mechanism. The reduction rate of Cr(VI) increased with increasing total chromate concentration, [Cr(VI)], and equivalent concentration of organic compounds, [OCs], and decreasing solution pH. It was found that the reduction rate of Cr(VI) was proportional to [Cr(VI)] and [OCs], suggesting the simple kinetic equation -d[Cr(VI)]/dt=k[Cr(VI)][OCs]. When considering the consumption of organic compounds due to the oxidation by Cr(VI), an average rate coefficient of 9.33 (+/-0.65)microM(-1)h(-1) was determined, at pH 2. Although the function of the pH could not be expressed in a mechanistic manner, an empirical model able to describe the pH dependence was obtained. It is expected that the developed rate equation could likely be used for design and performance predictions of biosorption processes for treating chromate wastewaters.     

Effect of N-hydroxyethyl-ethylenediamine-triacetic acid (HEDTA) on Cr(VI) reduction by Fe(II)

The complexation of Fe(II) with organic ligand results in the decrease of redox potential, and enhances the reduction ability of Fe(II). An important example is the use of Fe(II)-organic complexes to accelerate Cr(VI) reduction. Dissolved O(2) and light can potentially affect Cr(VI) reduction; however, these two factors have not been adequately evaluated. A batch technique was used to investigate the Cr(VI) reduction as influenced by the light and dissolved O(2) using N-hydroxyethyl-ethylenediamine-triacetic acid (HEDTA) and Fe(II) solutions. The oxidation of Fe(II) by dissolved O(2) was rapid in the presence of HEDTA at low pH; nonetheless, the oxidation proceeded slowly when HEDTA was absent. Although Cr(VI) could be reduced by free Fe(II) at low pH, the reaction was considerably slower than that of systems involving HEDTA. The enhancement of Cr(VI) reduction by Fe(II) in the presence of high concentrations of HEDTA was achieved as a result of two processes. First, HEDTA acted as a ligand for expediting electron transfer between Fe(II) and Cr(VI). Secondly, HEDTA served as a reductant for Cr(VI) under illumination.     

Fenton氧化对制浆造纸废水分子量及可生化性变化的影响

以制浆造纸废水的初沉池出水为研究对象,对不同剂量的Fenton氧化试剂处理制浆造纸厂初沉废水的效果进行了研究,初沉废水中的分子量大于10 000的有机污染物含量占到83%,废水可生化性较差;在Fe2+与H2O2的摩尔比为1∶5,废水pH为3.5的条件下,H2O2(30%)投加量小于3.25 mL/L时,Fenton试剂的氧化效率更高;H2O2(30%)投加量为6.50 mL/L时,废水中污染物的去除率更高,其中废水COD的去除率为79.5%,AOX的去除率为75.3%,色度去除率为97.5%,同时处理后废水中分子量在500~3 000之间的有机物含量占到82.98%,废水的BOD5/COD值提高到0.56。Fenton氧化作为前置技术处理制浆造纸废水,可以降低废水中的有机物分子量,减少废水的生物毒性,增加废水生物降解性,有助于后续生物处理的正常运行。