Growth and yield responses of spring wheat (Triticum aestivum L. cv. Minaret) to elevated CO2 and water limitation

Spring wheat (Triticum aestivum L. cv. Minaret) was grown at two different CO2 concentrations (367 and 650 micromol mol(-1)) in open-top-chambers from sowing until final harvest. Furthermore two different watering treatments (well watered and water stressed) and two soil types of different fertility were used. At final harvest, which took place at growth stage 92, plants were separated into different fractions. Elevated atmospheric CO2 caused an accelerated chlorophyll-a breakdown and increased growth and yield. Total shoot biomass was enhanced by 43%, grain yield by 46% and main stem yield by 19%. Water stress also accelerated chlorophyll-a breakdown but reduced total shoot biomass by 40%, grain yield by 45%, main stem yield by 30% and thousand grain weight by 6%. On average, soil fertility altered shoot biomass by 30%, grain yield by 39% and main stem yield by 25%.     

Ozone injection into an activated carbon bed to remove hydrogen sulfide in the presence of concurrent substances

Adsorption using activated carbon is one of the most reliable techniques for preventing odor by substances such as H2S. Concurrent substances in effluent gas often reduce the removal capacity of activated carbon for H2S. As a means of restoring capacity under such conditions, ozone injection into an activated carbon column was examined. When activated carbon was saturated with substances such as toluene, ethanol, n-butanol, or iso-butanol, its capacity to remove H2S decreased in proportion to the amount of the saturating substance. Under such conditions, ozone injection greatly increased capacity. Toluene, which is not easily decomposed by ozone, was displaced by ozone and by oxidized products of H2S. Ethanol, which is adsorbed in small amounts by activated carbon and easily decomposed by ozone, was removed by ozone injection. Butanols, which are also decomposed by ozone and adsorbed in large quantities by activated carbon, showed intermediate behavior between that of toluene and ethanol.     

Effect of metal tolerant plant growth promoting Bradyrhizobium sp. (vigna) on growth, symbiosis, seed yield and metal uptake by greengram plants

The nickel and zinc tolerant plant growth promoting Bradyrhizobium sp. (vigna) RM8 was isolated from nodules of greengram, grown in metal contaminated Indian soils. The plant growth promoting (PGP) potentials of strain RM8 was assessed both in the presence and absence of nickel and zinc under in vitro conditions. Strain RM8 tolerated a high level of nickel (300 microg ml(-1)) and zinc (1400 microg ml(-1)) on yeast extract mannitol agar medium. Bradyrhizobium sp. (vigna) strain RM8 produced 13.3 microg ml(-1) of indole acetic acid in Luria Bertani broth at 100 microg ml(-1) of tryptophan which increased to 13.6 microg ml(-1) at 50 microg Ni ml(-1) and 13.5 microg ml(-1) at 300 microg Zn ml(-1). Strain RM8 was positive for siderophore, HCN and ammonia both in the absence and presence of nickel and zinc. The PGP activity of this strain was further evaluated with increasing concentrations of nickel and zinc using greengram as a test crop. The bioinoculant enhanced the nodule numbers by 82%, leghaemoglobin by 120%, seed yield by 34%, grain protein by 13%, root N by 41% and shoot N by 37% at 290 mg Ni kg(-1) soil. At 4890 mg Zn kg(-1) soil, the bioinoculant increased the nodule numbers by 50%, leghaemoglobin by 100%, seed yield by 36%, grain protein by 13%, root N by 47% and shoot N by 42%. The bioinoculant strain RM8 reduced the uptake of nickel and zinc by plant organs compared to plants grown in the absence of bioinoculant. This study suggested that the bioinoculant due to its intrinsic abilities of growth promotion and attenuation of the toxic effects of nickel and zinc could be exploited for remediation of metal from nickel and zinc contaminated sites.     

微细水雾除尘技术的实验研究

分析了煤矿并下呼吸性粉尘防治技术现状，并对水的超声雾化技术进行了实验研究，应用回归分析建立了超声雾化性能的数学模型。在分析微细水雾捕尘机理及捕尘水雾凝并沉降技术的基础上，设计了一集微细水雾捕尘-凝聚、凝并降尘-惯性沉降分离为一体的含尘气流净化系统，并对该系统的除尘效率进行了实验研究，建立了相应的数学模型。     

Carcinogen-metabolizing enzymes and insecticides

The present study was under taken to demonstrate the effect of some commonly used insecticides on the activity of cytochrome P450 system including cytochrome b5, aryl hydrocarbon [benzo(a)pyrene] hydroxylase (AHH), N-nirosodimethylamine N-demethylase I [NDMA-dI] and NADPH-cytochrome c reductase as phase I of drug oxidation. In addition, the activity of glutathione S-transferase (GST), glutathione reductase (GR), and the level of glutathione (GSH) were determined in the liver of male mice after oral administration of sumithion, dursban, chlordane, methoxychlor, heptachlor epoxide, and lindane as single (24h) or as repeated doses for six consecutive days. Oral administration of sumithion, dursban, chlordane, methoxychlore, and heptachlor epoxide as repeated doses decreased: (i) the hepatic content of cytochrome P450 by 36, 37, 47, 37, and 67%, respectively, (ii) AHH activity by 28, 29, 70, 31, and 79%, respectively, (iii) NDMA-dI activity by 43, 44, 32, 27, and 31, respectively. On the other hand, sumithion, chlordane, and methoxychlore induced the activity of NADPH-cytochrome c reductase by 45, 62, and 43 respectively after repeated dose treatments. In addition, single and repeated-dose treatments of mice with lindane induced: (i) cytochrome P450 by 23 and 65%, respectively, (ii) cytochrome b5 by 49 and 131%, respectively, (iii) AHH activity by 64 and 50%, respectively. Repeated-dose treatments of mice with chlordane, methoxychlore, and heptachlor epoxide decreased the GSH level by 42, 38, and 68%, respectively and GST activity by 44, 44, and 55% respectively. Moreover, single- and repeated-dose treatments of mice with lindane decreased the GSH levels by 40 and 54%, respectively, and induced GST activity by 25 and 41%, respectively. Interestingly, single-dose treatments with chlordane, methoxychlore, and heptachlor epoxide decreased the activity of GR by 32, 38, and 31, respectively whereas repeated doses of these compounds induced such activity by 83, 50, and 64%, respectively. It is concluded that modifications in cytochrome P450 system by pesticides could potentiate the toxicity and carcinogenicity of environmental carcinogens such as polycyclic aromatic hydrocarbon and N-nirosodimethylamine (NDMA).     

Adsorption characteristics of pesticides methamidophos and glyphosate by two soils

Contributions of organic matter and minerals in soil were evaluated by comparing changes in adsorption of methamidophos (MDP) and glyphosate (GPS) before and after removal of organic matter from argaltoll (mollisol) and typustalf (alfisol) soils. Adsorption isotherms of MDP and GPS by the two soils comforted to Freundlich equation, and the adsorption capacity of GPS by argaltoll soil was higher than that of MDP. Due to the removal of organic matter from soils, K(f) values of MDP and GPS adsorbed by argaltoll soil, which were calculated from Freundlich equations and the measure of adsorption capacity, decreased by 46.1% and 75.0%, and these by typustalf soil decreased by 34.9% and 52.5%, respectively. Results from this study suggested that soil organic matter made greater contributions to adsorption of GPS, but soil minerals could provide more available adsorption sites for MDP.     

Role of surface functionality in the adsorption of anionic dyes on modified polymeric sorbents

While synthetic polymeric sorbents effectively treat dye wastewaters by adsorption, the underlying mechanisms remain to be understood. This work determined the adsorption of an anionic dye by three polymers differing significantly in surface functionality. Surface functional groups of polymers were indicated in FTIR spectra and quantified by the Boehm titration. In reference to the commercial sorbent XAD-4 with a low degree of functionality, the laboratory synthesized NG-8 had primarily acidic functional groups, whereas its aminated product MN-8 had mainly basic amino groups. Electrophoresis determined the points of zero charge of 4.18, 3.23, and 4.51 for XAD-4, NG-8, and MN-8, respectively. The adsorption of Reactive Black 5 dye (RB5) by all the sorbents on a unit surface area basis increased with decreasing pH. At the same low pH (4.40), the adsorption by NG-8 was similar to that by XAD-4, indicating little influence of protonated (neutral) surface functional groups. In contrast, the adsorption by NG-8 at pH 6.05 was 75% lower than that by XAD-4, resulting apparently from the strong electrostatic repulsion between RB5 and deprotonated (negative) groups. Amination substantially enhanced RB5 adsorption by eliminating acidic groups and creating a positive charge on the surface of MN-8. The adsorptive enhancement was also achieved in the presence of CaCl2, due presumably to the neutralization of negative surface charge by Ca2+ and the RB5-Ca2+ pairing. These results manifest the important role of surface functionality in the adsorption of dyes by synthetic polymers.     

Ozone Injection into an Activated Carbon Bed to Remove Hydrogen Sulfide in the Presence of Concurrent Substances

ABSTRACT

Adsorption using activated carbon is one of the most reliable techniques for preventing odor by substances such as H₂S. Concurrent substances in effluent gas often reduce the removal capacity of activated carbon for H₂S. As a means of restoring capacity under such conditions, ozone injection into an activated carbon column was examined. When activated carbon was saturated with substances such as toluene, ethanol, n-butanol, or iso-butanol, its capacity to remove H₂S decreased in proportion to the amount of the saturating substance. Under such conditions, ozone injection greatly increased capacity. Toluene, which is not easily decomposed by ozone, was displaced by ozone and by oxidized products of H₂S. Ethanol, which is adsorbed in small amounts by activated carbon and easily decomposed by ozone, was removed by ozone injection. Butanols, which are also decomposed by ozone and adsorbed in large quantities by activated carbon, showed intermediate behavior between that of toluene and ethanol.     

Estimating the extractability of potentially toxic metals in urban soils: a comparison of several extracting solutions

Metals released by the extraction with aqua regia, EDTA, dilute HCl and sequential extraction (SE) by the BCR protocol were studied in urban soils of Sevilla, Torino, and Glasgow. By multivariate analysis, the amounts of Cu, Pb and Zn liberated by any method were statistically associated with one another, whereas other metals were not. The mean amounts of all metals extracted by HCl and by SE were well correlated, but SE was clearly underestimated by HCl. Individual data for Cu, Pb and Zn by both methods were correlated only if each city was considered separately. Other metals gave poorer relationships. Similar conclusions were reached comparing EDTA and HCl, with much lower values for EDTA. Dilute HCl extraction cannot thus be recommended for general use as alternative to BCR SE in urban soils.     

Nuclear and coal electric power generation strategies for control of acid rain at Ontario Hydro

Ontario Hydro is committed to achieving major reductions in atmospheric emissions of SO₂ and NO_x in accordance with regulations established by the Ontario Government. Information is provided on electricity demand in Ontario, on Ontario Hydro's generation capacity mix and on the forecast use of generation to meet demand. Emphasis is placed on the comparative economics and emissions of Ontario Hydro's nuclear and coal-fired generation and on the integration of each into a cost-effective emission control program. Emissions of SO₂ and NO_x will be reduced by about 25% by 1986 and by about 50% by 1990, primarily by using nuclear generation to replace coal, by purchasing hydroelectric generation from neighbouring utilities, by controlling coal sulphur levels and by selective application of emission control technology on coal-fired plants.     

Effect of Roadbed Configuration on Traffic Derived Aerosols

Aerosols present upwind and downwind of freeways in the Los Angeles Basin were collected in five particle size ranges by Lundgren impactors with after filters and analyzed for elemental content by ion-excited x-ray emission. The contribution of freeway traffic to total airborne particulate load was obtained by subtracting the local background, measured by an upwind sampler, from the values obtained by downwind samplers on a size by size, element by element basis. This contribution correlated reasonably well with estimates derived from automotive and roadbed expendable rates. Traffic-derived aerosols, normalized to vehicular flow, were considerably lower in mass downwind of depressed roadbed configurations than either at grade or raised configurations. A line source model, combined with literature values for emitted lead, produced good agreement with results obtained in the at grade configuration.     

Effects of potassium alkalis and sodium alkalis on the dechlorination of o-chlorophenol in supercritical water

Effects of potassium alkalis and sodium alkalis on the dechlorination of o-chlorophenol (o-CP) in supercritical water (SCW) were studied in this paper under the conditions of 450 degrees C and 25 MPa. Experimental results indicated that the dechlorination of o-CP can be accelerated significantly by all alkalis investigated. The dechlorination of o-CP proceeded mainly via two pathways: hydrodechlorination and hydrolysis. Both of the two pathways can be promoted by alkalis, and the dechlorination of o-CP can be accelerated by both the cations and hydroxide ion dissociated from alkalis. The overall dechlorination of o-CP can be accelerated by cations via promoting the hydrodechlorination pathway, while, hydroxide ion via promoting the hydrolysis pathway. In addition, the hydrodechlorination can be accelerated faster by sodium alkalis than that by potassium ones, while, the hydrolysis can be promoted faster by potassium alkalis. This difference may be caused by the different charge density between potassium ion and sodium ion, and the different solubility and dissociation constant between potassium alkalis and sodium alkalis in SCW. Dechlorination of o-CP with addition of alkalis prior to supercritical water oxidation (SCWO) process not only can avoid the reactor corrosion caused by the generated hydrochloric acid in direct SCWO of o-CP, but also can reduce the formation of toxic chlorinated byproducts compared with direct SCWO process or SCWO of o-CP with addition of alkali.     

Effect of ultraviolet-absorbing vinyl film on organophosphorus insecticides dichlorvos and fenitrothion residues in spinach

Dichlorvos and fenitrothion residues found in spinach grown in greenhouse covered either by regular vinyl film or UV-absorbing vinyl film (UV-A) were analyzed by gas chromatography. After one day, dichlorvos residues in spinach covered with regular vinyl film and UV-A degraded by 97% and 80%, respectively, and degraded 100% after three days covered with regular vinyl film and six days covered with UV-A. After three days, fenitrothion residue in spinach covered with regular vinyl film degraded by 72% and then by 97% after six days; residue in spinach covered with UV-A degraded by 50% after three days and by 95% after six days. These results indicate that UV-A used to prevent the occurrence of insects and fungi in greenhouses reduced the degradation rates of dichlorvos and fenitrothion.     

Characteristics of different molecular weight fractions of organic matter in landfill leachate and their role in soil sorption of heavy metals.

We have characterised two kinds of municipal landfill leachates derived from 'old' and 'young' municipal waste landfills on the basis of the molecular weight distribution of the constituents, taking into account that the great variety of leachate constituents prevents any evaluation of the fate and of the role played by each component in the environmental impact. In the sample S1 (old leachate), the constituents were distributed over a wider range of molecular weights; high molecular weight fractions were present. In sample S2 (young leachate), the fractions are actually narrower at the lower molecular weights. The high molecular weight fractions of old leachates are found to be complex structures formed by condensed nuclei of carbons substituted by functional groups containing nitrogen, sulphur and oxygen atoms; the low molecular weight fractions of leachates are, instead, characterised by linear chains substituted by oxygenated functional groups such as carboxyl and/or alcoholic groups. After characterising each fraction we studied the role played by these fractions in the soil's capability for retaining heavy metals [copper (Cu) and cadmium(Cd)]. The Cd uptake increases only on the soil treated with sample S1 characterised by a higher pH value and by the presence of high molecular weight fractions. The Cu uptake also increases on the soil treated with sample S2, characterised by the sole presence of low molecular weight fractions. On the other hand, the metal adsorption tests performed on soil treated with the single fractions show that the amount of Cu and Cd retained by soil treated with the high molecular weight fractions of sample does not increase after 72 h of treatment and that the amount of Cu retained by the low molecular weight fractions of sample S1 and by the fractions of sample S2 increases, but does not justify the amount retained by soil treated with the total leachates.     

Response of Bean and Tobacco to Ozone: Effect of Light Intensity,Temperature and Relative Humidity

Pinto bean (Phaseolus vulgaris, L.) and Bel W₃ tobacco (Nicotiana tabacum, L.) were grown and exposed to 40 pphm ozone for 1 hr under a range of light intensities, temperatures, and relative humidities. Foliar injury to the more sensitive plant leaves was determined on the third day after exposure. Each atmospheric factor was independently assessed. Two significant three-way interactions were found: exposure light intensity by growth light intensity by species, and growth temperature by exposure temperature by species. Three significant two-way interactions were found for humidity: growth humidity by exposure humidity, growth humidity by species, and exposure humidity by species. The sensitivity of each species to ozone changed with changes in each environmental condition.     

Effectiveness in the use of natural gas for the reduction of atmospheric emissions: case study--industrial sector in the metropolitan region of Santiago,Chile

The purpose of this investigation was to quantify the potential of natural gas to reduce emissions from stationary combustion sources by analyzing the case study of the metropolitan region of Santiago, Chile. For such purposes, referential base scenarios have been defined that represent with and without natural gas settings. The method to be applied is an emission estimate based on emission factors. The results for this case study reveal that stationary combustion sources that replaced their fuel reduced particulate matter (PM) emissions by 61%, sulfur oxides (SOx) by 91%, nitrogen oxides (NOx) by 40%, and volatile organic compounds (VOC) by 10%. Carbon monoxide (CO) emissions were reduced by 1%. As a result of this emission reduction, in addition to reductions caused by other factors, such as a shift to cleaner fuels other than natural gas, technological improvements, and sources which are not operative, emission reduction goals set forth by the environmental authorities were broadly exceeded.     

Rapid determination of residues of pesticides in honey by µGC-ECD and GC-MS/MS: Method validation and estimation of measurement uncertainty according to document No. SANCO/12571/2013

A simple and straightforward method for simultaneous determination of residues of 13 pesticides in honey samples (acrinathrin, bifenthrin, bromopropylate, cyhalothrin-lambda, cypermethrin, chlorfenvinphos, chlorpyrifos, coumaphos, deltamethrin, fluvalinate-tau, malathion, permethrin and tetradifon) from different pesticide classes has been developed and validated. The analytical method provides dissolution of honey in water and an extraction of pesticide residues by n-Hexane followed by clean-up on a Florisil SPE column. The extract was evaporated and taken up by a solution of an injection internal standard (I-IS), ethion, and finally analyzed by capillary gas chromatography with electron capture detection (GC-µECD). Identification for qualitative purpose was conducted by gas chromatography with triple quadrupole mass spectrometer (GC-MS/MS). A matrix-matched calibration curve was performed for quantitative purposes by plotting the area ratio (analyte/I-IS) against concentration using a GC-µECD instrument. According to document No. SANCO/12571/2013, the method was validated by testing the following parameters: linearity, matrix effect, specificity, precision, trueness (bias) and measurement uncertainty. The analytical process was validated analyzing blank honey samples spiked at levels equal to and greater than 0.010 mg/kg (limit of quantification). All parameters were satisfactorily compared with the values established by document No. SANCO/12571/2013. The analytical performance was verified by participating in eight multi-residue proficiency tests organized by BIPEA, obtaining satisfactory z-scores in all 70 determinations. Measurement uncertainty was estimated according to the top-down approaches described in Appendix C of the SANCO document using the within-laboratory reproducibility relative standard deviation combined with laboratory bias using the proficiency test data.     

Reduction of fecal indicator bacteria in sewage effluent when pumping for crop irrigation.

When sewage effluent was pumped from a lagoon for spray irrigation the pumping process reduced the fecal coliforms (FC) by 66% and the fecal streptococci (FS) by 91%. Bactericidal effects associated with the pumping of effluent were investigated in the laboratory by seeding sterilized effluent with fecal bacteria and repeatedly passing the liquid through a centrifugal impeller type pump at 50 psi pressure. The pumping effect was cumulative, 49 and 90% of FC being killed after two and four passages through the pump, respectively. FC were more susceptible than FS to injury by pressure shock. Very weak chlorination of the effluent increased the destruction of FC but not FS during subsequent pumping. Within the range of experimental conditions used, the percentage of FC killed by pumping was not markedly affected by changes in temperature and pH of the effluent or by differences in the number and age of cells added.     

Polymers and surfactants on the basis of renewable resources

A new strategy for the preparation of different polymers and special surfactants was developed. First, unsaturated fatty acid methyl esters obtained from plant oils were converted to terminally unsaturated esters and alpha-olefins by metathesis with ethylene using heterogeneous rhenium or homogeneous ruthenium catalysts. These esters were directly copolymerized with ethylene by an insertion-type palladium-catalyzed polymerization to functionalized polyolefins. Polyesters were synthesized by metathetical dimerization of omega-unsaturated esters and subsequent polycondensation of the produced internally unsaturated dicarboxylic esters or by acidic transesterification with petrochemical diols and additional acyclic diene metathesis polymerization. Omega-epoxy fatty acid methyl esters, achieved by a new method of chemo-enzymatic epoxidation, were converted into polyethers with comb-structure catalyzed by aluminoxanes on the one hand and into sugar surfactants by nucleophilic ring-opening with amino carbohydrates on the other hand.     

污泥吸附剂对3种染料吸附动力学的研究

以污水厂脱水污泥、锯末和焦油的混合物为原料,选择ZnCl₂为活化剂制备出过渡孔发达、强度大的污泥吸附剂（S-AC）。借助BET、FT-IR等现代分析测试方法对污泥吸附剂进行表征,同时,研究了吸附剂对酸性大红、中性红和碱性品红吸附动力学行为。结果表明,制得的污泥吸附剂BET比表面积为358 m²/g,强度大于89%。吸附剂的动力学数据均符合伪二阶动力学方程、液膜扩散方程和颗粒内扩散方程,其中液膜扩散为吸附剂对酸性大红吸附过程的主控步骤,颗粒内扩散为吸附剂对中性红和碱性品红吸附过程的主控步骤。