Boiler briquette coal versus raw coal: Part I--Stack gas emissions

Stack gas emissions were characterized for a steam-generating boiler commonly used in China. The boiler was tested when fired with a newly formulated boiler briquette coal (BB-coal) and when fired with conventional raw coal (R-coal). The stack gas emissions were analyzed to determine emission rates and emission factors and to develop chemical source profiles. A dilution source sampling system was used to collect PM on both Teflon membrane filters and quartz fiber filters. The Teflon filters were analyzed gravimetrically for PM10 and PM2.5 mass concentrations and by X-ray fluorescence (XRF) for trace elements. The quartz fiber filters were analyzed for organic carbon (OC) and elemental carbon (EC) using a thermal/optical reflectance technique. Sulfur dioxide was measured using the standard wet chemistry method. Carbon monoxide was measured using an Orsat combustion analyzer. The emission rates of the R-coal combustion (in kg/hr), determined using the measured stack gas concentrations and the stack gas emission rates, were 0.74 for PM10, 0.38 for PM2.5, 20.7 for SO2, and 6.8 for CO, while those of the BB-coal combustion were 0.95 for PM10, 0.30 for PM2.5, 7.5 for SO2, and 5.3 for CO. The fuel-mass-based emission factors (in g/kg) of the R-coal, determined using the emission rates and the fuel burn rates, were 1.68 for PM10, 0.87 for PM2.5, 46.7 for SO2, and 15 for CO, while those of the BB-coal were 2.51 for PM10, 0.79 for PM2.5, 19.9 for SO2, and 14 for CO. The task-based emission factors (in g/ton steam generated) of the R-coal, determined using the fuel-mass-based emission factors and the coal/steam conversion factors, were 0.23 for PM10, 0.12 for PM2.5, 6.4 for SO2, and 2.0 for CO, while those of the BB-coal were 0.30 for PM10, 0.094 for PM2.5, 2.4 for SO2, and 1.7 for CO. PM10 and PM2.5 elemental compositions are also presented for both types of coal tested in the study.     

Characterization of activated carbon fiber filters for pressure drop, submicrometer particulate collection, and mercury capture

The use of activated carbon fiber (ACF) filters for the capture of particulate matter and elemental Hg is demonstrated. The pressure drop and particle collection efficiency characteristics of the ACF filters were established at two different face velocities and for two different aerosols: spherical NaCl and combustion-generated silica particles. The clean ACF filter specific resistance was 153 kg m-2 sec-1. The experimental specific resistance for cake filtration was 1.6 x 10(6) sec-1 and 2.4 x 10(5) sec-1 for 0.5- and 1.5-micron mass median diameter particles, respectively. The resistance factor R was approximately 2, similar to that for the high-efficiency particulate air filters. There was a discrepancy in the measured particle collection efficiencies and those predicted by theory. The use of the ACF filter for elemental Hg capture was illustrated, and the breakthrough characteristic was established. The capacity of the ACF filter for Hg capture was similar to other powdered activated carbons.     

Simultaneous determination of imidacloprid, thiacloprid, and thiamethoxam in soil and water by high-performance liquid chromatography with diode-array detection

A high-performance liquid chromatography method with diode-array detection (HPLC-DAD) is described for the determination of three neonicotinoid insecticides imidacloprid, thiacloprid, and thiamethoxam in soil and water. The soil samples were extracted with acetonitrile, while the water samples were extracted using C18 cartridges. The mean recoveries plus standard deviations for spiked soil samples were 82 +/- 4.2% for thiamethoxam, 99 +/- 4.2% for imidacloprid and 94 +/- 1.4% for thiacloprid. The recoveries for water samples ranged from 87 +/- 3.4% for thiamethoxam to 97 +/- 3.9% for imidacloprid and 97 +/- 2.6% for thiacloprid. The limits of quantitation (LOQ) were 0.1, 0.1, 0.01 mg/kg in soil (5g), and 2, 2, 0.5, micro/L in water (50 mL) for thiamethoxam, imidacloprid, and thiacloprid, respectively.     

Measurement of ion mobilities in air and sulfur dioxide-air mixtures as a function of temperature

Ion mobilities have been measured for air with varying concentrations of water vapor and for dilute sulfur dioxide-air mixtures. The conditions used were fairly comparable to those experienced in electrostatic precipitators, both laboratory and full-scale units. The mobilities of the negative ions exhibited a fairly strong temperature dependence. The reduced mobilities for sulfur dioxide-air mixtures were comparable to the reduced mobility for air. The results should be useful in precipitator modeling applications.     

A comparison of nonlinear regression and neural network models for ground-level ozone forecasting

A hybrid nonlinear regression (NLR) model and a neural network (NN) model, each designed to forecast next-day maximum 1-hr average ground-level O3 concentrations in Louisville, KY, were compared for two O3 seasons--1998 and 1999. The model predictions were compared for the forecast mode, using forecasted meteorological data as input, and for the hindcast mode, using observed meteorological data as input. The two models performed nearly the same in the forecast mode. For the two seasons combined, the mean absolute forecast error was 12.5 ppb for the NLR model and 12.3 ppb for the NN model. The detection rate of 120 ppb threshold exceedances was 42% for each model in the forecast mode. In the hindcast mode, the NLR model performed marginally better than the NN model. The mean absolute hindcast error was 11.1 ppb for the NLR model and 12.9 ppb for the NN model. The hindcast detection rate was 92% for the NLR model and 75% for the NN model.     

Measurements of atmospheric concentrations of trichlorofluoromethane,dichlorodifluoromethane and carbon tetrachloride by aircraft sampling over the British isles

Samples of air have been collected over Britain and its coastal waters in areas remote from anthropogenic sources of pollution and analysed for trichlorofluoromethane, dichlorodifluoromethane and carbon tetrachloride. The samples were collected during 1975 and early 1976 at altitudes of up to 8000 m. The overall mean background levels for these compounds for the period March-August 1975 inclusive was found to be 169 ± 30 pptv¹ for trichlorofluoromethane, 231±36 pptv for dichlorodifluoromethane and 59 ± 9 pptv for carbon tetrachloride. The mean backgrounds for the period January–February 1976, inclusive, were 165 ± 8 for trichlorofluoromethane, 240±20 for dichlorodifluoromethane and 65 ± 4for carbon tetrachloride.     

混凝-生物接触氧化-臭氧氧化工艺对印染废水处理特性评价

评价了大塘污水处理厂混凝-生物接触氧化-臭氧氧化工艺对印染废水的处理特性,分析处理过程中COD、色度的去除规律。结果表明:混凝-生物接触氧化-臭氧氧化工艺出水COD浓度最优水平值(TPSs-3.84%)为18.7 mg/L,中间水平浓度(TPSs-50%)为45 mg/L,COD浓度保证值(TPSs-95%)为62.7 mg/L,优于排放标准;工艺出水色度最优水平值(TPSs-3.84%)为10倍,中间水平浓度(TPSs-50%)为40倍,出水保证值(TPSs-95%)为45倍。其中,臭氧氧化在印染废水出水COD和色度的深度处理中发挥重要作用,将出水COD达标保障率由原来的91%提高到100%、出水色度的达标保障率由0%提高到90%。     

Analysis of organophosphorus pesticides in whole milk by solid phase microextraction gas chromatography method

Solid phase microextraction (SPME) was used for the extraction of residual coumaphos and dichlorvos in whole milk. The residues were analyzed by capillary gas chromatography equipped with nitrogen phosphorus detector (GC-NPD). A manual SPME holder with a 100-microm polyacrylate fiber was used. The optimized conditions for extraction by SPME method were: sample agitation, absorption temperature of 30 degrees C, absorption time of 40 min, desorption time of 10 min, and sample volume was 16.0 mL in the vial. Under these conditions, the calibration graphs were linear in the range of 0.17 microgL-1 to 1.75 microgL-1 for coumaphos and 0.69 microgL-1 to 6.90 microgL-1 for dichlorvos. Precision was good with RSD values of 13% for coumaphos and 14% for dichlorvos. The detection limits (LOD) were 0.060 microgL-1 for dichlorvos and 0.052 for coumaphos. The quantification limits (LOQ) were 0.086 microgL-1 for dichlorvos and 0.066 microgL-1 for coumaphos. The results obtained in this study suggest that SPME is a suitable technique for residual pesticide analysis of milk. The data demonstrate that particular OP pesticides used in dairy farming in the region of Minas Gerais were found to contaminate cow whole milk, and the residues are not removed by treating the milk by boiling.     

Effect of common food preservatives on mycelial growth and spore germination of Fusarium oxysporum

The growth and spore germination inhibition of Fusarium oxysporum f.sp. radicis-cucumerinum by the common food additives: acetic acid, formic acid potassium sorbate, propionic acid, sorbic acid, and the fungistatic agent sec-butylamine was examined in vitro. The inhibitory efficacy of these chemicals decreased in the following order: sorbic acid, potassium sorbate, propionic acid, acetic acid, sec-butylamine and formic acid. At pH 6.4, the ED50 value for mycelium growth was: 976 ppm for sorbic acid, 1292 ppm for potassium sorbate, 2435 ppm for propionic acid, 3805 ppm for acetic acid, 3962 ppm for sec butylamine and 4668 ppm for formic acid. The ED50 value for spore germination was: 225 ppm for potassium sorbate, 1201 ppm for sorbic acid, 1402 ppm for propionic acid, 1600 ppm for sec-butylamine, 1957 ppm for acetic acid and 2485 ppm for formic acid.     

One-dimensional simulation of solute transfer in saturated-unsaturated porous media using the discontinuous finite elements method

A one-dimensional transport model for simulating water flow and solute transport in homogeneous-heterogeneous, saturated-unsaturated porous media is presented. The model is composed of a combination of accurate numerical algorithms for solving the nonlinear Richard's and advection-dispersion equations (ADE). The mixed form of Richard's equation is solved using a standard finite element method (FEM) with primary variable switching. The transport equation is solved using operator splitting, with the discontinuous finite element method (DFE) for discretization of the advective term. A slope limiting procedure for DFE avoids numerical instabilities but creates very limited numerical dispersion for high Peclet numbers. An implicit finite differences scheme (FD) is used for the dispersive term. The unsaturated flow and transport model (Wamos-T) is applied to a variety of rigorous problems including transient flow, heterogeneous medium and abrupt variations of velocity in magnitude and direction due to time-varying boundary conditions. It produces accurate and mass-conservative solutions for a very large range of grid Peclet numbers. The Wamos-T model is a good and robust alternative for the simulation of mass transport in unsaturated domain.     

A gas chromatography/high-resolution mass spectrometry (GC/HRMS) method for determination of polybrominated diphenyl ethers in fish

A method for the determination of polybrominated diphenyl ethers (PBDEs) in biota for routine analysis is described. The mass spectroscopic (MS) evaluation of 23 brominated diphenyl ethers, under electron ionization and electron capture negative ion conditions using magnetic sector and quadrupole mass spectrometers, showed that high-resolution mass spectrometry (HRMS) under electron ionization conditions was the most reliable technique, with high selectivity and adequate sensitivity. The instrument detection limit for this method ranged for individual congeners between 4.8 and 0.1 pg for 3-bromodiphenyl ether (BDE-2) and 2,3',4,4'-tetrabromodiphenyl ether (BDE-66), respectively, and method detection limit for each homologue group ranged between 5 pg/g for salmon certified reference material (CRM) and 93 pg/g for lake trout CRM. The effectiveness of this method was evaluated by analyzing the occurrence of PBDEs in commercially available CRMs comprising Lake Ontario lake trout, Pacific herring, and sockeye salmon. The average coefficients of variation for the replicate analyses of PDBEs in several tissue samples were: 25% for lake trout, 36% for Pacific herring, and 34% for sockeye salmon. The average deviations in the inter-laboratory study were: 14% for lake trout, 15% for Pacific herring, and 37% for sockeye salmon. Results indicated that the described method, based on gas chromatography/high-resolution mass spectrometry, is reliable for determining PBDE concentrations in biological tissues.     

搁置过夜的青菜汤中的亚硝酸盐氮

通过对搁置过夜的青菜汤中亚硝酸盐氮的测定,来说明搁置过夜的青菜汤不能再吃,以利于人体健康。     

Formation of bound residues by naphthalene and cis-naphthalene-1,2-dihydrodiol

The formation of bound residues by naphthalene and its metabolite, cis-naphthalene-1,2-dihydrodiol, in a sediment (1% OC), a silty loam soil (2.9% OC) and a peat (26% OC) was examined. The experiments were carried out under both sterile and nonsterile conditions for up to 35 days. The samples containing bound contaminant were hydrolyzed at an alkaline pH and fractionated using 3,000 and 500 Da molecular weight cutoff ultrafiltration membranes in series. The results for all the geosorbents examined showed that bound residue formation is low for naphthalene and between 5 and 20 times higher for the metabolite. The amount of bound residues released by hydrolysis was higher for the metabolite than for the parent compound for all the samples. The molecular weight distribution of bound radioactivity after hydrolysis showed binding to the high molecular weight components of the sediment organic matter and to the low molecular weight components for soil and peat organic matter when incubated with cis-naphthalene-1,2-dihydrodiol. Experiments performed with naphthalene-UL-(14)C showed larger amounts of bound residue found than in experiments with naphthalene-1-(14)C.     

Determination of organochlorine and organophosphate pesticide residues in fruits, vegetables and sediments.

A method is described for the determination of organochlorine and organophosphate pesticide residues in fruits, vegetables and sediments. The concentrated solvent extract was sealed in a polymeric membrane tube, dialysed in cyclohexane and the solvent replaced with hexane. The organophosphates were analysed on a specific thermionic detector without further clean-up. For the organochlorine pesticides the extract was eluted through 3 g of alumina and analysed on GC/ECD. The clean-up for sediment extract was carried out on a 10 g alumina column with 100 mL hexane containing 5% acetone and the eluate was concentrated to 5 mL. The detection limit for organophosphates on a 40 g sample and a final volume of 10 mL was on the average 0.01 mg/kg. The detection limit for organochlorine pesticides, with the final volume of 25 mL, was 0.005 mg/kg for all pesticides except for p,p'-DDT and endosulfan sulphate, which was 0.01 mg/kg. The detection limit for organochlorine pesticides in sediment, with the final volume of 2 mL, was less than 1 microgram/kg and for organophosphate pesticides less than 10 micrograms/kg when the final volume was made to 0.5 mL. At the detection limits the method produced a very high coefficient of variation for both organochlorine and organophosphate pesticides.     

Accumulation and excretion of organophosphorous pesticides by willow shiner

Bioconcentration and excretion of 8 organophosphorous pesticides were studied for willow shiner ( ). The average bioconcentration factors (BCF) in the whole body of the fish after 24 – 168 hr exposure were 0.8 for dichlorvos, 76 for salithion, 18 for methidathion, 29 for pyridaphenthion, 481 for fenthion and 36 for phosmet, Further, the BCF values of the other pesticides after 168 hr exposure were 713 for phenthoate and 1682 for EPN. The correlation between n-octanol-water partition coefficients (P_OW) and BCF in willow shiner was investigated for 19 pesticides studied here and already reported. The correlation factor (r) was not so high (0.6819, n=19) but higher (0.9085, n=18) in case excluding captan. The excretion rate constants (k) from the whole body of willow shiner were 0.20 hr⁻¹ for salthion, 0.05 hr⁻¹ for phenthoate, 0.27 hr⁻¹ for methidathion, 0.20 hr⁻¹ for pyridaphenthion, 0.07 hr⁻¹ for fenthion, 0.04 hr⁻¹ for EPN and 0.28 hr⁻¹ for phosmet.     

盆栽植物净化甲苯废气

采用动态模拟法模拟盆栽植物对甲苯污染气体的净化,考察吊兰和金绿萝两种盆栽植物在净化甲苯过程中,甲苯入口浓度与植物对甲苯净化速率的关系。结果表明,2种盆栽植物对低浓度甲苯废气具有长期明显的净化效果。在相同条件下,吊兰茎叶和土壤的净化速率优于金绿萝体系。在植物的耐受浓度范围内,2种植物茎叶和土壤的净化速率均随着甲苯入口浓度的升高而增大,且白天的净化速率明显高于黑夜时的净化速率。在实验过程中,吊兰土壤体系的降解率随着甲苯浓度的升高逐渐下降;金绿萝土壤体系的降解率基本不受甲苯入口浓度的影响。吊兰盆栽体系的降解率明显大于金绿萝的降解率。两种植物盆栽体系的降解率随甲苯进口浓度的影响可以忽略。     

A directional passive air sampler for monitoring polycyclic aromatic hydrocarbons (PAHs) in air mass

A passive air sampler was developed for collecting polycyclic aromatic hydrocarbons (PAHs) in air mass from various directions. The airflow velocity within the sampler was assessed for its responses to ambient wind speed and direction. The sampler was examined for trapped particles, evaluated quantitatively for influence of airflow velocity and temperature on PAH uptake, examined for PAH uptake kinetics, calibrated against active sampling, and finally tested in the field. The airflow volume passing the sampler was linearly proportional to ambient wind speed and sensitive to wind direction. The uptake rate for an individual PAH was a function of airflow velocity, temperature and the octanol-air partitioning coefficient of the PAH. For all PAHs with more than two rings, the passive sampler operated in a linear uptake phase for three weeks. Different PAH concentrations were obtained in air masses from different directions in the field test.     

环保疏浚的技术要求与环保绞刀的设计

湖泊底泥环保疏浚是消除内源性污染最快捷、最有效的方法,并为生态恢复创造条件,而环保绞刀是湖泊底泥环保疏浚的必要条件.阐述了环保疏浚的技术要求,设计了绞吸式挖泥船用环保绞刀,满足了湖泊底泥环保疏浚的需要.     

环保疏浚的技术要求与环保绞刀的设计

湖泊底泥环保疏浚是消除内源性污染最快捷、最有效的方法，并为生态恢复创造条件，而环保绞刀是湖泊底泥环保疏浚的必要条件。阐述了环保疏浚的技术要求，设计了绞吸式挖泥船用环保绞刀，满足了湖泊底泥环保疏浚的需要。     

Oxygen Stratification in Industrial Boiler Stacks

The DSS/2 software system was used to numerically simulate oxygen stratification effects in a typical industrial boiler stack. The model developed for the simulation involves turbulent mass transfer in a tube with a constant, high mass flux from the walls of the tube. The concentration profile is considered to be developing, but the velocity profile is assumed to be fully developed. The model is for a gaseous system at constant temperature and pressure; the transport properties are shown to be constant. The universal velocity profile for turbulent flow and von Karman’s expressions for the turbulent eddy diffusivity are incorporated in the model. An expression for a wall concentration profile corresponding to conditions of high mass flux at the wall is developed. The model is then expressed as a system of partial differential equations which are solved using the numerical method of lines together with the DSS/2 numerical integration system. The resulting concentration profiles are presented for various flux rates which might be encountered in a typical stack. These profiles indicate that a potential for oxygen stratification in stacks does exist; they also suggest that careful placement of the oxygen cell probe can help minimize such errors.