SimPhy: a simulation game to lessen the impact of phytosanitaries on health and the environment—the case of Merja Zerga in Morocco

Diffuse phytosanitary pollution is a complex phenomenon to manage. Reducing this type of pollution is one of today’s key socio-economic and environmental challenges. At the regional level, few approaches enable the actors concerned to implement agricultural management strategies to reduce the use and impact of phytosanitary products. Our research problem focused on the consequences of intensive agriculture and, in particular, how to evaluate the impact of phytosanitary products on human health and the environment. In this article, we present the SimPhy simulation game which places the actors from a given region directly into a situation in which they manage farms whilst under pressure to reduce phytosanitaries (quantity and toxicity). The application focused on the Merja Zerga catchment area in Morocco. The region is dominated by intensive agriculture which is located upstream from a Ramsar-classified wetland area. The SimPhy simulation game is based on a decision support system-type tool. It allows us to anticipate the impact of regulations on farming systems. It also enables us to analyse the consequences of the actors’ strategies on farm economies, human health and the quality of ecosystems. Initial results from the SimPhy simulation game enabled the technicians from Agricultural Development Center (CDA) themselves to learn about managing agricultural production systems in a dynamic and interactive fashion. With the simulation game, it was possible to learn about the farmer's ability to adapt to new regulatory constraints, and the involved consequences for toxicity risks for human health and the environment.     

Assessment of human health risk related to metals by the use of biomonitors in the province of Córdoba, Argentina

The evaluation of metal contents in the environment is of vital importance for the assessment of human exposure. Thus the species Usnea amblyoclada, Ramalina celastri and Tillandsia capillaris were tested as bioaccumulators of transition metals in the urban area of Córdoba city, Argentina. The level of metals on biomonitors was compared to that of total deposition samples. All three species discriminated zones within the urban area of Córdoba city with different pollution levels; they revealed high levels of Zn in the downtown area and confirmed high levels of some transition metals in an industrial area. The correlation analysis revealed that the lichen R. celastri had the highest correlation rates with total deposition samples, suggesting it is a valuable biomonitor of atmospheric pollution. A significant relationship was also observed between respiratory diseases in children and the contents of metal accumulated in R. celastri and T. capillaris, indicating their usefulness when assessing human exposure to metals.     

Socio-economic and environmental impacts of COVID-19 pandemic in Pakistan—an integrated analysis

Environmental Science and Pollution Research - The COVID-19 pandemic has affected about 210 countries with more than 67 million confirmed cases and over 1.5 million deaths across the globe...     

How to improve the problem of hotel manpower shortage in the COVID-19 epidemic environment? Exploring the effectiveness of the hotel practice training system

Environmental Science and Pollution Research - This study aimed to examine the role of effective employee training in the sustainable growth and corporate social responsibility of hotels during the...     

Uncertainty of pesticides in foodstuffs,associated environmental and health risks to humans—a critical case of Bangladesh with respect to global food policy

Environmental Science and Pollution Research - The uncertain fate and transport pathways of applied pesticides are the key hidden threats with respect to the safety and quality evaluation of...     

Solid waste management of small island developing states—the case of the Seychelles: a systemic and collaborative study of Swiss and Seychellois students to support policy

Solid waste management (SWM) is a significant challenge for the Seychelles. Waste generation, fueled by economic development and tourism, increases steadily, while landfilling continues to be the main disposal path, thus exacerbating the island nation’s specific weaknesses. Due to the small scale of the Seychelles economy, there is little capital available to stimulate innovations in SWM and generate the knowledge for setting priorities and guiding SWM action. Students from ETH Zurich and UniSey conducted a transdisciplinary case study (tdCS) to fill this knowledge gap and gain insights into the obstacles and opportunities related to sustainable SWM. The tdCS approach allowed students to gain comprehensive and in-depth knowledge about the SWM system required to set priorities for action and next steps. The government should streamline the different financial frameworks according to a clear principle (e.g., polluter pays principle). Specific biogenic waste streams represent a potential source of energy and fertilizers. Expanding the scope and densifying the network of collection points could help raise recycling rates of other waste fractions. Diverting biogenic waste and recycling more glass, metals, paper, and plastics would also significantly reduce landfilling rates. Regardless of future amounts of waste ending up on landfills, the latter must be reengineered before the surrounding environment suffers major adverse impacts. All these actions imply a government-driven approach which integrates the views of stakeholders and consumers alike.     

Connecting the dots between inflammatory cascades of obesity and COVID-19 in light of mortal consequences—a review

Environmental Science and Pollution Research - Obesity is a term that has recently been referred to describe a condition in which a person has become a diseased vessel. Obesity’s internal...     

Validation of the species sensitivity distribution in retrospective risk assessment of herbicides at the river basin scale—the Scheldt river basin case study

Species sensitivity distribution (SSD) is commonly used in prospective risk assessment to derive predicted no-effect concentrations, toxicity exposure ratios, and environmental quality standards for individual chemicals such as pesticides. The application of SSD in the retrospective risk assessment of chemical mixtures at the river basin scale (i.e., the estimation of “multiple substance potentially affected fractions” [msPAFs]) has been suggested, but detailed critical assessment of such an application is missing. The present study investigated the impact of different data validation approaches in a retrospective model case study focused on seven herbicides monitored at the Scheldt river basin (Belgium) between 1998 and 2009. The study demonstrated the successful application of the SSD approach. Relatively high impacts of herbicides on aquatic primary producers were predicted. Often, up to 40 % of the primary producer communities were affected, as predicted by chronic msPAF, and in some cases, the predicted impacts were even more pronounced. The risks posed by the studied herbicides decreased during the 1998–2009 period, along with decreasing concentrations of highly toxic pesticides such as simazine or isoproturon. Various data validation approaches (the removal of duplicate values and outliers, the testing of different exposure durations and purities of studied herbicides, etc.) substantially affected SSD at the level of individual studied compounds. However, the time-consuming validation procedures had only a minor impact on the outcomes of the retrospective risk assessment of herbicide mixtures at the river basin scale. Selection of the appropriate taxonomic group for SSD calculation and selection of the species-specific endpoint (i.e., the most sensitive or average value per species) were the most critical steps affecting the final risk values predicted. The present validation study provides a methodological basis for the practical use of SSD in the retrospective risk assessment of chemical mixtures.     

Exposure to phthalates in early pregnancy and the risk of fetal growth restriction: a nested case–control study in a Zhuang Chinese population

Environmental Science and Pollution Research - Phthalates (PAEs) are common endocrine disrupting chemicals (EDCs) that disrupt fetal development. The present study aimed to evaluate the effects of...     

Life cycle–based,energy-related analysis for waste management strategies: a case study of two impact indicators in Pyongyang

Environmental Science and Pollution Research - Municipal solid waste (MSW) is regarded to be an important source of greenhouse gas emissions, which could result in a significant impact on climate...     

Mathematical modelling of dispersion and chemical reactions in a plume — oxidation of no to NO2 in the plume of a power plant

A mathematical model is presented for the dispersion and chemical reactions of pollutants in chimney plumes. It assumes that atmospheric dispersion is such that an inert constituent would be distributed in a Gaussian fashion downwind of the chimney, uses a discreet approximation approach to obtain concentrations of reactive pollutants, and can account for reactive species entrained into the plume from the ambient air. The model is used to interpret some data on NO₂ formation in the plume of a power plant chimney.     

Farming experience and farmers’ adoption of low-carbon management practices: the case of soil testing and fertilizer recommendations in China

Environmental Science and Pollution Research - In response to global climate change, the Chinese Government has taken numerous measures to promote low-carbon management practices, but the overall...     

Inventory and substance flow analysis of polybrominated diphenyl ethers in the Nigerian transport sector—end-of-life vehicles policy and management

Recently, certain polybrominated diphenyl ethers (PBDEs) have been listed as persistent organic pollutants (POPs) in the Stockholm Convention. In this study, a preliminary material and substance flow analysis of commercial pentabromodiphenyl ether (c-PentaBDE) was conducted for motor vehicles—a major use sector for POP-PBDE in polyurethane (PUR) foam—for Nigeria. The methodology of the Stockholm Convention PBDE inventory guidance was used for the calculation of c-PentaBDE. Material/substance flow analysis was conducted applying the STAN software. The time frame for this analysis was 1980–2010, considering that this was the period when POP-PBDE-containing vehicles were largely imported into Nigeria.It is estimated that the approximately 19 million passenger cars imported from 1980 to 2010 contained ca. 270 t of POP-PBDEs in ca. 401,000 t of PUR foam. A major share of cars from the USA and only a small share of cars from Europe and Asia were impacted. This simplified material and substance flow of PUR foams and POP-PBDEs in motor vehicles demonstrated the potential for environmental/human contamination and pollution of recycling/reuse for Nigeria and other developing countries.The study developed the first preliminary inventory of end-of-life vehicles for Nigeria, following which the environment ministry has taken up the important issue of end-of-life vehicles management. Considering that a range of other pollutants are contained in vehicles (e.g. heavy metals, flame retardants, PCBs, chlorofluorocarbons, hydrofluorocarbons and waste oil), this initiated activity should finally lead to an integrated management of pollutants and resources from the transport sector.     

Associations of bisphenol exposure with the risk of gestational diabetes mellitus: a nested case–control study in Guangxi,China

Environmental Science and Pollution Research - A growing number of epidemiologic studies have estimated the associations between endocrine-disrupting chemicals and gestational diabetes mellitus...     

Aromatic hydrocarbons in the atmospheric environment – Part II: univariate and multivariate analysis and case studies of indoor concentrations

The concentrations of the aromatic hydrocarbons benzene, toluene, ethylbenzene and the isomeric xylenes (BTEX) have been determined in the indoor air of 115 private non-smoker homes (∼380 individual rooms) situated in areas with an extreme traffic situation, i.e. in city streets (street canyons) with high traffic density and in rural areas with hardly any traffic at all. The influence of the traffic on the indoor concentration was apparent in the high traffic area. In order to identify other factors influencing the BTEX concentrations, the data and additional questionnaires were analyzed by univariate and multivariate analysis. The analysis was supplemented by some case studies. It is shown that meteorology (the seasons), the type of room (e.g. living room versus bedroom), the ventilation and, in particular, garages in the house strongly influence the indoor concentration of BTEX. Thus, the indoor BTEX level is significantly higher in winter than in summer. Moreover, garages with a connecting door to the living quarters lead to high indoor concentrations of aromatic hydrocarbons in these rooms. In addition, the storage of solvents and hobby materials, and also the presence of smoking guests increase the BTEX level. If rooms are directly heated by coal or wood, the BTEX level is higher compared to the use of gas heating. Surprisingly, no correlation was found between the building materials used and the BTEX level. Case studies were carried out for two homes with an integrated garage (and a connecting door to the living rooms) and for seven homes where redecoration work was carried out during sampling. In both instances, a pronounced increase was observed in the BTEX concentration.     

COVID-19 pandemic: environmental and social factors influencing the spread of SARS-CoV-2 in São Paulo,Brazil

Environmental Science and Pollution Research - The new coronavirus SARS-CoV-2 has infected more than 14 million people worldwide so far. Brazil is currently the second leading country in number of...     

Chronic exposure to lead acetate promotes changes in the alveolar bone of rats: microstructural and physical–chemical characterization

Environmental Science and Pollution Research - There are a few data relating to the effects of lead (Pb) exposure on the alveolar bone, which has very distinct morphophysiological characteristics...     

Correlating the trends of COVID-19 spread and air quality during lockdowns in Tier-I and Tier-II cities of India—lessons learnt and futuristic strategies

Environmental Science and Pollution Research - The present study focuses on the impact of early imposed lockdowns and following unlocking phases on the status of air quality in six Tier-I and nine...     

Pollution of water in Africa: a review of contaminants and fish as biomonitors and analytical methodologies—the case of Senegal

Environmental Science and Pollution Research - Environmental pollution is one of the major problems facing human health, ecosystems, and biodiversity. This is particularly the case for water...