Effect of soil pH on availability to crops of metals in sewage sludge-treated soils. II. Cadmium uptake by crops and implications for human dietary intake

Appropriate pH-related permissible soil-limit concentrations for cadmium in sewage sludge-treated agricultural soils were estimated from the proportional changes in concentrations of cadmium in potatoes, oats and ryegrass grown on two sludge-amended soils and at different pH values. Implications for potential human dietary intake of cadmium were also assessed. Yields of crops increased with increasing soil pH, probably in response to decreasing uptake of zinc as soil pH value was raised. In general, cadmium concentrations in peeled potato tubers, potato peelings, oat straw and ryegrass decreased as simple linear functions of increasing soil pH over the range of pH values measured (pH 3.9-7.6). Cadmium concentrations in potato peel were particularly sensitive to changing pH conditions, whereas cadmium levels in oat grain were independent of soil pH. On the basis that a highly precautionary approach is adopted in setting soil standards for heavy metals, appropriate permissible concentrations of cadmium in sludge-treated agricultural soil which protect the human food chain were determined as 2.0 and 2.5 mg Cd Kg(-1) for banded pH ranges of 5.0-5.5 and 5.5-6.0, respectively.     

The effects of pH and soil type on concentrations of zinc, copper and nickel extracted by calcium chloride from sewage sludge-treated soils

The effects of pH on concentrations of zinc, copper and nickel extracted by calcium chloride from a clay loam and two sandy loam soils that had been treated with sewage sludge were studied. Concentrations of all the metals increased rapidly as pH decreased below a threshold value ranging from 6.2 to 7.0 for Zn, 6.2 to 7.2 for Ni and 4.7 to 5.7 for Cu. Both the total concentrations and the threshold pH values were influenced by differences in soil texture and (between the two light-textured soils) by differences in soil cation exchange capacity. The amount of zinc and copper extracted from the mixtures was considerably less than that extracted from the same quantity of sludge alone.     

Survey of heavy metal pollution and assessment of agricultural soil in Yangzhong district, Jiangsu Province, China

We investigated concentrations of Hg, Cd, Pb, Zn, Cu, As, Ni, and Cr in samples of soil, cereal, and vegetables from Yangzhong district, China. Compared to subsoils, the sampled topsoils are enriched in Hg, Cd, Cu, Pb, Zn, and As. High levels of Cd and Hg are observed in most agricultural soils. Concentrations of Cr and Ni show little spatial variation, and high Cu, Pb, and Zn contents correspond well to areas of urban development. High As contents are primarily recorded at the two ends of the sampled alluvion. The contents of Cd, Hg, and total organic carbon (TOC) increase gradually to maximum values in the upper parts of soil profiles, while Cr and Ni occur in low concentrations within sampled profiles. As, Pb, Cu, and Zn show patterns of slight enrichment within the surface layer. Compared to data obtained in 1990, Cd and Hg show increased concentrations in 2005; this is attributed to the long-term use of agrochemicals. Cr and Ni contents remained steady over this interval because they are derived from the weathering of parent material and subsequent pedogenesis. The measured As, Cu, Pb, and Zn contents show slight increases over time due to atmospheric deposition of material sourced from urban anthropogenic activity. Low concentrations of heavy metals are recorded in vegetables and cereals because the subalkaline environment of the soil limits their mobility. Although the heavy metal concentrations measured in this study do not pose a serious health risk, they do affect the quality of agricultural products.     

Solubility of lead, zinc and copper added to mineral soils

Elevated levels of heavy metals in soils are a result of industrial activities, atmospheric deposition, and the land application of sewage sludges and industrial by-products. Their persistence in the soil environment has created interest in the possible changes in solubility. In this study, total dissolved concentrations of Pb, Zn, and Cu were monitored in seven metal-amended soils (a calcareous and six acid mineral soils). Single metal solutions were added to soils and equilibrated (aged) for 40 days. During the 40 days the soil was allowed to air-dry and was rewetted in cycles of about 5 days. At the end of this reaction period, metal solubility was measured (by atomic absorption spectrometry and direct current plasma spectrometry) at the initial soil pH and at decreased pH values which were induced by addition of small aliquots of acid. As expected, solubility of added Pb, Zn, and Cu increased with a decrease in pH. Furthermore, the results showed that the solubility relationship with pH was similar in all non-calcareous soils. This suggests that metal solubility may be controlled by similar soil components, presumably involving soil characteristics such as pH, organic matter content, and soil mineralogy. For each metal, an approximate pH value was found at which solubility deviated from the solubility of metals when they occur in soils at typical (natural) values. This pH was about (pH+/-0.2): 5.2 for Pb, 6.2 for Zn, and 5.5 for Cu. Thus, pH values below these thresholds may enhance metal mobility, biological availability and toxicity in soils. Metals dissolved at higher pH in the calcareous soil (18.8 g kg(-1) inorganic carbon, initial pH 8.2). In a calcareous soil, a significant fraction of these metals react with carbonates, and decreased pH results in much higher metal dissolution. Yet, metal solubility in soils is not determined by the formation and dissolution of single metal compounds.     

Effects of sewage sludge amendment on heavy metal accumulation and consequent responses of Beta vulgaris plants

Use of sewage sludge, a biological residue produced from sewage treatment processes in agriculture is an alternative disposal technique of waste. To study the usefulness of sewage sludge amendment for palak (Beta vulgaris var. Allgreen H-1), a leafy vegetable and consequent heavy metal contamination, a pot experiment was conducted by mixing sewage sludge at 20% and 40% (w/w) amendment ratios to the agricultural soil. Soil pH decreased whereas electrical conductance, organic carbon, total N, available P and exchangeable Na, K and Ca increased in soil amended with sewage sludge in comparison to unamended soil. Sewage sludge amendment led to significant increase in Pb, Cr, Cd, Cu, Zn and Ni concentrations of soil. Cd concentration in soil was found above the Indian permissible limit in soil at both the amendment ratios.

The increased concentration of heavy metals in soil due to sewage sludge amendment led to increases in heavy metal uptake and shoot and root concentrations of Ni, Cd, Cu, Cr, Pb and Zn in plants as compared to those grown on unamended soil. Accumulation was more in roots than shoots for most of the heavy metals. Concentrations of Cd, Ni and Zn were more than the permissible limits of Indian standard in the edible portion of palak grown on different sewage sludge amendments ratios. Sewage sludge amendment in soil decreased root length, leaf area and root biomass of palak at both the amendment ratios, whereas shoot biomass and yield decreased significantly at 40% sludge amendment. Rate of photosynthesis, stomatal conductance and chlorophyll content decreased whereas lipid peroxidation, peroxidase activity and protein and proline contents, increased in plants grown in sewage sludge-amended soil as compared to those grown in unamended soil.

The study clearly shows that increase in heavy metal concentration in foliage of plants grown in sewage sludge-amended soil caused unfavorable changes in physiological and biochemical characteristics of plants leading to reductions in morphological characteristics, biomass accumulation and yield. The study concludes that sewage sludge amendment in soil for growing palak may not be a good option due to risk of contamination of Cd, Ni and Zn and also due to lowering of yield at higher mixing ratio.     

Distribution coefficients of potentially toxic elements in soils from the eastern Amazon

The solid-solution distribution or partition coefficient (Kd) is a measure of affinity of potentially toxic elements (PTE) for soil colloids. Kd plays a key role in several models for defining PTE guideline values in soils and for assessing environmental risks, and its value depends on edaphic and climatic conditions of the sites where the soils occur. This study quantified Kd values for Cd, Co, Cr, Cu, Hg, Ni, Pb, and Zn from representative soil samples from Brazil’s eastern Amazon region, which measures 1.2 million km². The Kd values obtained were lower than those set by both international and Brazilian environmental agencies and were correlated with the pH, Fe and Mn oxide content, and cationic exchange capacity of the soils. The following order of decreasing affinity was observed: Pb?>?Cu?>?Hg?>?Cr?>?Cd?≈?Co?>?Ni?>?Zn.     

Effect of biosolid incorporation to mollisol soils on Cr, Cu, Ni, Pb, and Zn fractionation, and relationship with their bioavailability

Biosolid application to soil may be a supply of nutrients and micronutrients but it may also accumulate toxic compounds which would be absorbed by crops and through them be incorporated to the trophic chain.

The present study deals with the effect of biosolid application on Cr, Cu, Pb, Ni, and Zn in agricultural soils. The procedure used is sequential extraction so that the availability of those metals may be estimated and related to their bioavailability as determined through two indicator plants grown in greenhouse: ryegrass (Lolium perenne L.) and red clover (Trifolium pratense). Results showed that biosolid application to soil increased total Cu and Zn content. Sequential extraction showed that the more labile Zn fractions increased after biosolid application to soil. This was confirmed when assessing the total content of this metal in shoot and root of the plants under study, since a higher content was found in plant tissues, while no significant differences were found for Cu, Cr, Ni, and Pb.     

Effects of short-term pH fluctuations on cadmium, nickel, lead, and zinc availability to ryegrass in a sewage sludge-amended field

In this field experiment, sewage sludge was applied at 0, 5, 10, and 50tha(-1), and the availability of Cd, Ni, Pb, and Zn was assessed both by ryegrass uptake and by DTPA extractions. The aim was to investigate the role of important soil parameters, particularly pH, on heavy metal availability. It was found that metal uptake and extractability increased significantly in the 50tha(-1) treatment. In the 16th week of the experiment there was a significant, although temporary, increase in DTPA-extractable Cd, Ni, and Zn concentrations. Metal concentrations in ryegrass were also significantly elevated in week 20 compared to the subsequent cuttings. These fluctuations in both DTPA and ryegrass uptake occurred only at 50tha(-1) and were probably induced by a sudden pH decrease measured in the same treatment in week 16. This suggests that soils which have received high applications of sewage sludge may be prone to fluctuations in metal availability.     

Influence of solution acidity and CaCl2 concentration on the removal of heavy metals from metal-contaminated rice soils

Soil washing is considered a useful technique for remediating metal-contaminated soils. This study examined the release edges of Cd, Zn, Ni, Cr, Cu or Pb in two contaminated rice soils from central Taiwan. The concentrations exceeding the trigger levels established by the regulatory agency of Taiwan were Cu, Zn, Ni and Cr for the Ho-Mei soil and Pb for the Nan-Tou soil. Successive extractions with HCl ranging from 0 to 0.2 M showed increased release of the heavy metals with declining pH, and the threshold pH value below which a sharp increase in the releases of the heavy metals was highest for Cd, Zn, and Ni (pH 4.6 to 4.9), intermediate for Pb and Cu (3.1 to 3.8) and lowest for Fe (2.1), Al (2.2) and Cr (1.7) for the soils. The low response slope of Ni and Cr particularly for the rice soils make soil washing with the acid up to the highest concentration used ineffective to reduce their concentrations to below trigger levels. Although soil washing with 0.1 M HCl was moderately effective in reducing Cu, Pb, Zn and Cd, which brought pH of the soils to 1.1+/-0.1 (S.D.), the concurrent release of large quantities of Fe and Al make this remediation technique undesirable for the rice soils containing high clay. Successive washings with 0.01 M HCl could be considered an alternative as the dissolution of Fe and Al was minimal, and between 46 to 64% of Cd, Zn, and Cu for the Ho-Mei soil and 45% of Pb in the Na-Tou soil were extracted after four successive extractions with this dilute acid solution. The efficacy of Cd extraction improved if CaCl2 was added to the acid solution. The correlation analysis revealed that Cr extracted was highly correlated (P < 0.001) with Fe extracted, whereas the Cu, Ni, Zn, Cd or Pb extracted was better correlated (P < 0.001) with Al than with Fe extracted. It is possible that the past seasonal soil flooding and drainage in the soils for rice production was conducive to incorporating Cr within the structure of Fe oxide, thereby making them extremely insoluble even in 0.2 M HCl solution. The formation of solid solution of Ni with Al oxide was also possible, making it far less extractable than Cd, Zn, Cu, or Pb with the acid concentrations used.     

Use of sequential extraction to assess metal partitioning in soils

The state of heavy metal pollution and the mobility of Cd, Cu, Ni, Cr, Pb and Zn were studied in three texturally different agricultural soil profiles near a Cu-Ni smelter in Harjavalta, Finland. The pseudo-total concentrations were determined by an aqua regia procedure. Metals were also determined after division into four fractions by sequential extraction with (1) acetic acid (exchangeable and specifically adsorbed metals), (2) a reducing agent (bound to Fe/Mn hydroxides), (3) an oxidizing agent (bound to soil organic matter) and (4) aqua regia (bound to mineral structures). Fallout from the smelter has increased the concentrations of Cd, Cu and Ni in the topsoil, where 75-90% of Cd, 49-72% of Cu and 22-52% of Ni occurred in the first two fractions. Slight Pb and Zn pollution was evident as well. High proportions of mobile Cd, Cu and Ni also deeper in the sandy soil, closest to the smelter, indicated some downward movement of metals. The hydroxide-bound fraction of Pb dominated in almost all soils and horizons, while Ni, Cr and Zn mostly occurred in mineral structures. Aqua regia extraction is usefully supplemented with sequential extraction, particularly in less polluted soils and in soils that exhibit substantial textural differences within the profiles.     

A model for evaluation of the phytoavailability of trace elements to vegetables under the field conditions

Currently, several single extraction methods are used for the evaluation of the phytoavailability of metals using pot experiments. A systematic comparison, however, is lacking. It is especially true for the field studies. This study was to investigate the phytoavailability of trace elements to vegetables grown on metal-contaminated soils under the field conditions. All soils collected were typical calcareous soils in northern China. Four frequently used methods using CaCl2, diethylenetriaminepentaacetic acid (DTPA), CH3COOH, and water as extractants were compared for phyto-availability. The concentrations of metals extracted by these four extraction methods ranged from 3.42 to 815, 1.51- 6965, 0.732-24473, 0.688-7863, 0.246-685, 1.99-5337 0.203-4649 ng/g for Cr, Ni, Zn, Cu, Cd, Pb and REEs, respectively. Simple correlation analysis indicated that a significant correlation (Cr: r = 0.5411**; Zn: r = 0.6352**; Cd: r = 0.6979**; Pb: r = 0.5537** and REEs: r = 0.5185** -0.6684**) was observed between the CaCl2-extractable metals in soil solution and that in Chinese cabbage. In addition, soil pH, organic matter (OM), and cation exchange capacity (CEC) also affect the phytoavailability. An empirical model was developed to express the combined effect of soil properties on the phytoavailability. The stepwise multiple regression analysis demonstrated that the phytoavailability of trace elements strongly correlated with the extractable fraction by CaCl2, total metal concentration in soils, and soil pH, OM, CEC. This model can describe approximately 75-95% of the variability of metal uptake and the r2 values ranged from 0.741** to 0.954**, which were much better than the single correlation analysis. For celery and cole, a strong correlation was obtained for Cr, Ni, Zn, Cu, Cd, La, Ce, Pr and Nd. For spinach and Chinese cabbage, however, a positive correlation was only observed for 1 and 3 metals, respectively. Generally, the developed empirical model can integrate the combined effects of soil properties, extractable metal fractions in soil solutions and plant species on the phytoavailability of metals to vegetables in the field conditions.     

Bioavailability and plant accumulation of heavy metals and phosphorus in agricultural soils amended by long-term application of sewage sludge

Amendment of agricultural soils with municipal sewage sludges provides a valuable source of plant nutrients and organic matter. Nevertheless, addition of heavy metals and risks of eutrophication continue to be of concern. Metal behaviour in soils and plant uptake are dependent on the nature of the metal, sludge/soil physico-chemical properties and plant species. A pot experiment was carried out to evaluate plant production and heavy metal uptake, soil heavy metal pools and bioavailability, and soil P pools and possible leaching losses, in agricultural soils amended with sewage sludge for at least 10 years (F20) compared to non-amended soils (control). Sewage sludge application increased soil pH, N, Olsen-extractable-P, DOC and exchangeable Ca, Mg and K concentrations. Total and EDTA-extractable soil concentrations of Cu and Zn were also significantly greater in F20, and soil metal (Cu, Mn and Zn) and P fractionation altered. Compared to the control, in F20 relative amounts of acid-extractable (Mn, Zn), reducible (Mn, Zn) and oxidisable (Cu, Zn) metal fractions were greater, and a dominance of inorganic P forms was observed. Analyses of F20 soil solutions highlighted risks of PO4 and Cu leaching. However, despite the observed increases in metal bioavailability sewage sludge applications did not lead to an increase in plant shoot concentrations (in wild plants or crop species). On the contrary, depending on the plant species, Mn and Zn tissue concentrations were within the deficiency level for most plants.     

Heavy metals incidence in the application of inorganic fertilizers and pesticides to rice farming soils

The concentrations of Cd, Co, Cu, Ni, Pb, Zn, Fe and Mn in different inorganic fertilizers (urea, calcium superphosphate, iron sulphate and copper sulphate) and in pesticides (two herbicides and one fungicide) are evaluated together with the contribution of these metals in soils from their use. The study was made in rice farming areas to the north of Albufera Natural Park (Valencia, Spain). The results obtained show that superphosphate is the fertilizer that contains the highest concentrations of Cd, Co, Cu and Zn as impurities. Copper sulphate and iron sulphate have the most significant concentrations of Pb, and are the only fertilizers in which Ni was detected. The three pesticides analysed show similar Cd contents and the highest levels of Fe, Mn, Zn, Pb and Ni are found in the herbicides. The most significant additions of heavy metals as impurities that soil receives from agricultural practices, are Mn, Zn, Co and Pb. Three contamination indexes have been applied to provide a basis for comparison of potential heavy metal toxicity. These results denote the potential toxicity of heavy metals in the studied soils.     

Contribution of heavy metals and As-loaded lupin root mineralization to the availability of the pollutants in multi-contaminated soils

White lupin (Lupinus albus L.) is an annual crop that has been used for phytostabilization of acidified multi-contaminated soils. Once the culture cycle is over, after shoot harvesting, a progressive transference of contaminants from roots to soil may take place as decomposition of roots occurs. An incubation experiment with Cu, Zn, Cd, and As-loaded roots of white lupin and soils with different pH values and concentrations of these contaminants from the area affected by a mine spill at Aznalcóllar (near Seville, Spain) was performed in order to assess the effect of the decomposition of the roots to the pH and (NH4)2SO4-extractable levels of these pollutants in the soils. Pollutants loaded-roots were mineralized (56 d) at a ratio similar to animal manures (15.8-19.4% of total organic carbon) in soil. The estimated root inputs of contaminants in comparison to their extractable concentrations in soil were high, especially in the control, non-contaminated and neutral contaminated soils. However, the extractable concentrations of the toxic elements in the soil were mainly governed by soil pH. Hence, the correction and maintenance of the soil pH within the range 5-6 after lupin culture is essential for long-time phytostabilization of acidified multi-contaminated soils.     

Effects of sewage sludge biochar on plant metal availability after application to a Mediterranean soil

Pyrolytic conversion of sewage sludge into biochar could be a sustainable management option for Mediterranean agricultural soils. The aim of this work is to evaluate the effects of biochar from sewage sludge pyrolysis on soil properties; heavy metals solubility and bioavailability in a Mediterranean agricultural soil and compared with those of raw sewage sludge. Biochar (B) was prepared by pyrolysis of selected sewage sludge (SL) at 500 °C. The pyrolysis process decreased the plant-available of Cu, Ni, Zn and Pb, the mobile forms of Cu, Ni, Zn, Cd and Pb and also the risk of leaching of Cu, Ni, Zn and Cd. A selected Mediterranean soil was amended with SL and B at two different rates in mass: 4% and 8%. The incubation experiment (200 d) was conducted in order to study carbon mineralization and trace metal solubility and bioavailability of these treatments. Both types of amendments increased soil respiration with respect to the control soil. The increase was lower in the case of B than when SL was directly added. Metals mobility was studied in soil after the incubation and it can be established that the risk of leaching of Cu, Ni and Zn were lower in the soil treated with biochar that in sewage sludge treatment. Biochar amended samples also reduced plant availability of Ni, Zn, Cd and Pb when compared to sewage sludge amended samples.     

The distribution of metals in the forest floor of aged conifer stands at a plantation in Northern England

The distribution of the elements Cd, Cr, Cu, Mn, Ni, Pb, Sr, V and Zn has been examined in the horizons of soils under aged Sitka spruce (Picea sitchensis (Bong.) Carr.) stands at a plantation in Northern England. The stands are under first-generation cultivation and are up to 33 years old. Cadmium, Mn, Pb and Zn concentrations were consistently higher in the organic layers than in the underlying mineral soil. This contrasted with the situation for Sr and V. Cadmium, Pb and Zn all showed an increase in concentration in the L + F horizons with stand age and a corresponding increase in the difference between L + F horizon concentrations. Soil pH declined with increasing stand age. Cadmium, Cr, Pb and Zn were all present at higher concentrations in the F horizon than in any other, while Cu and Ni were relatively constant through all the horizons studied. For all nine elements, the H horizon was the largest store of the three organic layers. Calculated rates of accumulation of Cd, Pb and Zn in the L + F horizons gave good agreement with estimated regional atmospheric deposition rates. In comparison to atmospheric deposition, biological mobilisation and deposition of Cd, Pb and Zn make a relatively minor contribution to the surface soil metal burden. Cadmium appeared to be the most readily leached of these three metals from the forest floor, although some transfer of atmospherically-derived Pb to the H+ soil horizons was indicated.     

White birch (Betula papyrifera Marshall) foliar litter decomposition in relation to trace metal atmospheric inputs at metal-contaminated and uncontaminated sites near Sudbury, Ontario and Rouyn-Noranda, Quebec, Canada

Decomposition of white birch (Betula papyrifera Marshall) foliar litter was examined at metal-contaminated and uncontaminated sites established along gradients of soil Cu, Ni, Pb and Zn concentrations near Sudbury, Ontario and Rouyn-Noranda, Quebec. Over an 18-month study period, a significantly lower rate of litter mass loss was observed at the Sudbury contaminated site (S1) than at the uncontaminated site (S2). This result was not duplicated at corresponding sites (RN1, RN2) in Rouyn-Noranda, despite similar levels of soil metal contaminants and atmospheric inputs. Concentrations of metals in litter increased at all sites with time. However, the greatest litter Cu and Ni concentrations were observed at S1 (188 and 192 microg/g, respectively), a result of substantial net gains of these elements from atmospheric inputs. On a per hectare basis, Cu accumulation in litter at S1 approached recommended application rates of Cu as copper sulphate for control of fungal diseases in agricultural operations, indicating that the current rate of Cu smelter emissions in Sudbury may cause the observed impairment of decomposition.     

Assessing heavy metal sources in agricultural soils of an European Mediterranean area by multivariate analysis

According to the European Thematic Strategy for Soil Protection, the characterization of the content and source of heavy metals in soils are necessary to establish quality standards on a regional level that allow the detection of sampling sites affected by pollution. In relation to this, the surface horizons of 54 agricultural soils under vegetable crops in the Alicante province (Spain), a representative area of the European Mediterranean region, were sampled to determine the content of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn. Analytical determinations were performed by atomic absorption spectroscopy after microwave sample digestion in acid solution. Results indicated that heavy metal levels were similar to those reported by authors working on agricultural soils from other parts of the Mediterranean region, with the exception of Cu and Pb in some samples. Multivariate analysis (principal component analysis and cluster analysis) was performed to identify a common source for heavy metals. Moreover, soil properties were determined in order to characterize agricultural soils and to analyze relationships between heavy metal contents and soil properties. The content of Co, Cr, Fe, Mn, Ni and Zn were associated with parent rocks and corresponded to the first principal component called the lithogenic component. A significant correlation was found between lithogenic metals and some soil properties such as soil organic matter, clay content, and carbonates, indicating an important interaction among them. On the other hand, elements such as Cd, Cu and Pb were related to anthropic activities and comprised the second (Cu and Pb) and third principal components (Cd), designated the anthropogenic components. Generally, Cd, Cu and Pb showed a lower correlation with soil properties due to the fact that they remain in available forms in these agricultural soils. Taking into account these results and other achieved in other parts of the European Mediterranean region, it can be concluded that soil quality standards are highly needed to declare soils affected by human induced pollution. This is particularly relevant for anthropogenic metals (Cd, Cu and Pb, and in some areas also Zn). Further research in other agricultural areas of the region would improve the basis for proposing such soil quality standards.     

DDT residues in Lebanese soils

The present study was conducted to evaluate the levels of residual DDT in Lebanese soils. A total of 113 surface soil samples were collected for analysis from three major agricultural regions in the country: Mount Lebanon, Beqa'a valley and the coastal plain. The values of residual DDT in soils ranged between 0 and 1190 ng g(-1). The majority of the analyzed soil samples were free or contained very low concentrations of DDE. Only two surface soil samples, which were collected from urban areas with high human activities, contained relatively high concentrations of residual DDT. The levels of residual DDT in all of the analyzed soil samples were within the permissible limits for agricultural soils.     

Effects of sewage sludge biochar on plant metal availability after application to a Mediterranean soil

Pyrolytic conversion of sewage sludge into biochar could be a sustainable management option for Mediterranean agricultural soils. The aim of this work is to evaluate the effects of biochar from sewage sludge pyrolysis on soil properties; heavy metals solubility and bioavailability in a Mediterranean agricultural soil and compared with those of raw sewage sludge. Biochar (B) was prepared by pyrolysis of selected sewage sludge (SL) at 500 °C. The pyrolysis process decreased the plant-available of Cu, Ni, Zn and Pb, the mobile forms of Cu, Ni, Zn, Cd and Pb and also the risk of leaching of Cu, Ni, Zn and Cd. A selected Mediterranean soil was amended with SL and B at two different rates in mass: 4% and 8%. The incubation experiment (200 d) was conducted in order to study carbon mineralization and trace metal solubility and bioavailability of these treatments. Both types of amendments increased soil respiration with respect to the control soil. The increase was lower in the case of B than when SL was directly added. Metals mobility was studied in soil after the incubation and it can be established that the risk of leaching of Cu, Ni and Zn were lower in the soil treated with biochar that in sewage sludge treatment. Biochar amended samples also reduced plant availability of Ni, Zn, Cd and Pb when compared to sewage sludge amended samples.