Review of PCBs in US schools: a brief history,an estimate of the number of impacted schools,and an approach for evaluating indoor air samples

PCBs in building materials such as caulks and sealants are a largely unrecognized source of contamination in the building environment. Schools are of particular interest, as the period of extensive school construction (about 1950 to 1980) coincides with the time of greatest use of PCBs as plasticizers in building materials. In the USA, we estimate that the number of schools with PCB in building caulk ranges from 12,960 to 25,920 based upon the number of schools built in the time of PCB use and the proportion of buildings found to contain PCB caulk and sealants. Field and laboratory studies have demonstrated that PCBs from both interior and exterior caulking can be the source of elevated PCB air concentrations in these buildings, at levels that exceed health-based PCB exposure guidelines for building occupants. Air sampling in buildings containing PCB caulk has shown that the airborne PCB concentrations can be highly variable, even in repeat samples collected within a room. Sampling and data analysis strategies that recognize this variability can provide the basis for informed decision making about compliance with health-based exposure limits, even in cases where small numbers of samples are taken. The health risks posed by PCB exposures, particularly among children, mandate precautionary approaches to managing PCBs in building materials.     

The estimation of consumer health risk associated with organochlorine xenobiotics in hard smoked cheese in Poland

The aim of this study was to estimate the health risks associated with consumption of smoked cheeses, which are popular in Poland. The analysis covered polychlorinated biphenyl (PCB) indicator congeners (ndl-PCBs: PCB 28, PCB 52, PCB 101, PCB 138, PCB 153, PCB 180), dioxin-like PCBs (dl-PCBs): non-ortho (PCB 77, PCB 81, PCB 126, PCB 169) and mono-ortho (PCB 105, PCB 114, PCB 118, PCB 156, PCB 157), as well as organochlorine pesticides (OCPs: αHCH, βHCH, γHCH, heptachlor, aldrin, heptachlor epoxid isomer B, dieldrin, pp'DDE op′DDD, pp′DDT, pp′DDD, op′DDT, endrin). The pesticide residues detected in the examined cheese were below the maximum residues levels. The estimated daily intake [lifetime average daily dose (LADD)] referring to the sum of the compounds varied within 4.21·10^?7–3.92·10^?6 mg·kg^?1·day^?1 and was significantly lower than the tolerable daily intake/acceptable daily intake (TDI/ADI) for individual compounds. The health hazard quotient, being the exact measure of the magnitude of exposure potential or a quantifiable potential for developing non-carcinogenic health effects after an averaged exposure period, was also very low, ranging from 2.87·10^?6 to 5.32·10^?5. The obtained results confirmed that the intake of rennet cheese does not pose any consumer health risk in Poland.     

PCB contaminated dust on indoor surfaces--health risks and acceptable surface concentrations in residential and occupational settings

Polychlorinated biphenyls (PCBs) have been used in diverse purposes such as indoor paints. Removal of these paints with dust creating techniques, like sandblasting, will result in contamination of building surfaces with PCB-containing dust. Objectives of this study was to analyze the PCB concentrations on surfaces after sandblasting with silica using wipe samples and estimate the resulting health risks and further calculate the risk based acceptable PCB surface concentrations that do not cause incremental lifetime cancer risk higher that 10(-5) or does not cause immunosupression effects in residential use or in occupational settings. Both deterministic and probabilistic approaches were used. The total PCB concentrations on surfaces ranged from 10 to 1100 microg/m(2). Estimated cancer risk was 1.2 x 10(-4) for childhood exposure, 1.3 x 10(-5) for adult residents and 1.5 x 10(-5) for occupational exposure. Probabilistic risk assessment revealed that point estimates were quite reasonable and located between 45th and 79th percentiles on probabilistic distribution of risk. The noncancer risks were calculated as hazard quotients (HQ) which ranged from 3.3 to 35 depending on the exposure scenario. Acceptable surface concentrations based on noncancer effects that are protective for 95% of exposed population were 7 microg/m(2) for residential use, 65 microg/m(2) for residential use if only adults will be exposed and 140 microg/m(2) for occupational use. Preliminary cleanup experiment revealed that when contaminated dust was carefully removed with industrial vacuum cleaner and further washed with terpene containing liquid the surface concentration dropped below the acceptable levels calculated in this study.     

Life cycle of PCBs and contamination of the environment and of food products from animal origin

This report gives a summary of the historic use, former management and current release of polychlorinated biphenyls (PCBs) in Germany and assesses the impact of the life cycle of PCBs on the contamination of the environment and of food products of animal origin. In Germany 60,000 t of PCBs were used in transformers, capacitors or as hydraulic oils. The use of PCB oils in these “closed applications”, has been banned in Germany in 2000. Thirty to 50% of these PCBs were not appropriately managed. In West Germany, 24,000 t of PCBs were used in open applications, mainly as additive (plasticiser, flame retardant) in sealants and paints in buildings and other construction. The continued use in open applications has not been banned, and in 2013, an estimated more than 12,000 t of PCBs were still present in buildings and other constructions. These open PCB applications continuously emit PCBs into the environment with an estimated release of 7–12 t per year. This amount is in agreement with deposition measurements (estimated to 18 t) and emission estimates for Switzerland. The atmospheric PCB releases still have an relevant impact on vegetation and livestock feed. In addition, PCBs in open applications on farms are still a sources of contamination for farmed animals. Furthermore, the historic production, use, recycling and disposal of PCBs have contaminated soils along the lifecycle. This legacy of contaminated soils and contaminated feed, individually or collectively, can lead to exceedance of maximum levels in food products from animals. In beef and chicken, soil levels of 5 ng PCB-TEQ/kg and for chicken with high soil exposure even 2 ng PCB-TEQ/kg can lead to exceedance of EU limits in meat and eggs. Areas at and around industries having produced or used or managed PCBs, or facilities and areas where PCBs were disposed need to be assessed in respect to potential contamination of food-producing animals. For a large share of impacted land, management measures applicable on farm level might be sufficient to continue with food production. Open PCB applications need to be inventoried and better managed. Other persistent and toxic chemicals used as alternatives to PCBs, e.g. short chain chlorinated paraffins (SCCPs), should be assessed in the life cycle for exposure of food-producing animals and humans.     

Polychlorinated biphenyls (PCBs) in marine fishes from China: Levels, distribution and risk assessment

Muscle tissues of large yellow croakers (Pseudosciaena crocea) and sliver pomfret (Pampus argenteus) from nine coastal cities of East China including Dalian, Tianjin, Qingdao, Shanghai, Zhoushan, Wenzhou, Fuzhou, Quanzhou and Xiamen were analyzed for polychlorinated biphenyl (PCB) concentrations. Thirty-six PCB congeners were quantified in the fishes, of which 11 congeners were dioxin-like PCBs. The total PCB concentrations of the present study were at the low end of the global range, which may be related to the smaller usage and shorter consumption history of PCBs in China. PCBs 18, 29, 52, 66, 101, 104, 138, 153, 180 and 194 were the major constituents found in the fish samples. Regression analysis showed a strong positive correlation (R² = 0.800; p < 0.001) between total dioxin-like PCBs and total PCB concentrations, and that total PCB concentrations explain 80% of the variability in total dioxin-like PCB concentrations. Among the species investigated, significantly higher concentrations of total PCBs were found in croakers than in pomfrets, which may be attributed to their different feeding and living habits. No significant difference in total PCB concentrations among the cities was observed; principal component analysis (PCA) of PCB profiles indicated that PCB pollution came from similar sources in the sampling areas and that there may be other PCB sources in Dalian and Wenzhou. The calculated carcinogenic risks (CRs) from the two species based on a low consumption group and high consumption group were all greater than 10⁻⁶, suggesting that daily exposure to dioxin-like PCBs via fish consumption results in a lifetime cancer risk of greater than one in one million. In contrast, the hazard quotients (HQs) of noncancer risks were all less than unity.     

Evaluation of PCB sources and releases for identifying priorities to reduce PCBs in Washington State (USA)

Polychlorinated biphenyls (PCBs) are ubiquitously distributed in the environment and produce multiple adverse effects in humans and wildlife. As a result, the purpose of our study was to characterize PCB sources in anthropogenic materials and releases to the environment in Washington State (USA) in order to formulate recommendations to reduce PCB exposures. Methods included review of relevant publications (e.g., open literature, industry studies and reports, federal and state government databases), scaling of PCB sources from national or county estimates to state estimates, and communication with industry associations and private and public utilities. Recognizing high associated uncertainty due to incomplete data, we strived to provide central tendency estimates for PCB sources. In terms of mass (high to low), PCB sources include lamp ballasts, caulk, small capacitors, large capacitors, and transformers. For perspective, these sources (200,000–500,000 kg) overwhelm PCBs estimated to reside in the Puget Sound ecosystem (1500 kg). Annual releases of PCBs to the environment (high to low) are attributed to lamp ballasts (400–1500 kg), inadvertent generation by industrial processes (900 kg), caulk (160 kg), small capacitors (3–150 kg), large capacitors (10–80 kg), pigments and dyes (0.02–31 kg), and transformers (<2 kg). Recommendations to characterize the extent of PCB distribution and decrease exposures include assessment of PCBs in buildings (e.g., schools) and replacement of these materials, development of Best Management Practices (BMPs) to contain PCBs, reduction of inadvertent generation of PCBs in consumer products, expansion of environmental monitoring and public education, and research to identify specific PCB congener profiles in human tissues.     

Lactational transfer of mercury and polychlorinated biphenyls in polar bears

We examined concentrations of total mercury (tHg, inorganic and methylated forms) and polychlorinated biphenyls (PCBs) in blood and milk from free-ranging Southern Beaufort-Chukchi Sea polar bears (Ursus maritimus) to assess maternal transfer of contaminants during lactation and the potential health risk to nursing young. Concentrations of contaminants in the blood of dependent and juvenile animals (ages 1-5 years) ranged from 35.9 to 52.2 μg kg(-1) ww for tHg and 13.9 to 52.2 μg kg(-1) ww (3255.81-11067.79 μg kg(-1) lw) for ΣPCB(7)s, similar to those of adult females, but greater than adult males. Contaminant concentrations in milk ranged from 5.7 to 71.8 μg tHg kg(-1)ww and 160 to 690 μg ΣPCB(11)s kg(-1) ww (547-5190 μg kg(-1) lw). The daily intake levels for tHg by milk consumption estimated for dependent young were below the tolerable daily intake level (TDIL) of tHg established for adult humans. Although the daily intake levels of PCBs through milk consumption for cubs of the year exceeded the TDIL thresholds, calculated dioxin equivalents for PCBs in milk were below adverse physiological thresholds for aquatic mammals. Relatively high concentrations of non-dioxin like PCBs in polar bear milk and blood could impact endocrine function of Southern Beaufort-Chukchi Sea polar bears, but this is uncertain. Transfer of contaminants during mid to late lactation likely limits bioaccumulation of dietary contaminants in female polar bears during spring. As polar bears respond to changes in their arctic sea ice habitat, the adverse health impacts associated with nutritional stress may be exacerbated by tHg and PCBs exposure, especially in ecologically and toxicologically sensitive polar bear cohorts such as reproductive females and young.     

Bioaccumulation of polychlorinated biphenyls in the eel (Anguilla anguilla) at the Camargue Nature Reserve - France

Fish consumption is a potential source of human exposure to pollutants. Here, we study residue levels of PCBs in the eel, Anguilla anguilla, from the Nature Camargue Reserve in southern France. Chromatographic analysis (GC-ECD) found seventy identifiable congeners, among which, 10 are considered as dioxin-like PCBs, such as the non-ortho PCB 81 and the mono-ortho chlorobiphenyls PCB105, 114, 118, 123, 156, 157, 167, 170, 180. Toxic Equivalents (TEQ, WHO 2005 TEF-Toxic Equivalent Factors) varied among sites with a maximum in eels from Mornès (29.6pgg(-1) dry weight). Indicator PCBs (28, 52, 101, 118, 138, 153 and 180) were 22% and 29% of the total PCBs in livers and muscles respectively. Greater homogeneous bioaccumulation in muscle than that in liver suggests an increase risk for humans due to fish consumption.     

Assessment of the daily intake of 62 polychlorinated biphenyls from dietary exposure in South Korea

The dietary intake of polychlorinated biphenyls (PCBs) was estimated using the sum of 62 PCB congeners (∑₆₂PCBs), including seven indicator PCBs and 12 dioxin-like PCBs, in the South Korea. In this study, 200 individual food samples belonging to 40 different foodstuffs were investigated to estimate the distribution of PCB congeners in five sampling cities. PCB exposure was estimated using Korean dietary habits as established by the National Health and Nutrition Examination Survey (NHANES). The PCB concentrations in rice, the most frequently consumed food in Korea, was relatively low in whole food samples. The mean PCB levels measured in fish were the highest in this study, but each fish is consumed in relatively small amounts by the general population. Therefore, the daily dietary intake should also be considered with regard to human exposure to PCBs, especially with the consumption of contaminated foods. Dioxin-like PCB levels were also calculated using TEF values that were established in 2005. The average levels (pg TEQ/g) were 0.0002 for rice and 0.0098 for fish. The dioxin-like PCBs accounted for a relatively small percentage of the total PCBs, compared to previous studies. According to our research, the health risks associated with exposure to PCBs could be estimated using the tolerable daily intake (TDI) of the general population.     

Detection of indoor PCB contamination by thermal desorption of dust. A rapid screening method?

Although PCB in caulking materials has been forbidden for many years in most of Europe, including Denmark, there has been continued interest to measure PCB levels in the air of contaminated buildings and blood of the occupants (Mengon and Schlatter 1993, Fromme et al. 1996, Ewers et al. 1998, Currado and Harrad 1998, Gabrio et al. 2000). The relatively low priority for investigations of this contamination is probably due to the small quantities inhaled compared to exposure via food, and the rapid metabolism of the most volatile congeners demonstrated by low concentrations of all congeners in the blood of exposed persons (Ewers et al. 1998, Gabrio et al. 2000). There is, however, evidence that PCB containing caulking materials have been used even during the '90s (Fromme et al. 1996). In Denmark, it is estimated that 75 t PCB is still in buildings (Organization of Sealant Branch's Manufacturers and Distributors 2000). During an investigation of dust from buildings with excessive microbial growth (including 35 rooms from 9 buildings), the analysis of semivolatile compounds by thermal desorption-GC/MS of samples from a single building surprisingly revealed large amounts of PCBs containing 3, 4 and 5 chlorine atoms, 10-20 times the amounts found in samples from other buildings. Extraction of the dust by SFE followed by GC/ECD analysis for 12 PCB congeners showed that there was approximately 20 times the total PCB concentrations in dust from the polluted building compared to the levels in the other buildings. Subsequent headspace analysis of caulking material from the polluted building revealed this to be the source. Shelf dust functions as a passive sampling medium and, thus, can be used as a screening method to detect PCB and other semivolatile pollution indoors.     

River water contaminated with perfluorinated compounds potentially posing the greatest risk to young children

Although, humans are exposed to perflourinated compounds (PFCs) from various media, water consumption could be an important source for the residents living near to contaminated areas. Since comprehensive multimedia exposure model has not been developed for PFCs, assessment of the potential risk due to exposure to PFCs through direct water consumption could be a conservative estimate. The human health risks derived from the exposure to PFCs through water consumption were assessed for different age groups of general population in Taiwan using probabilistic approach. Based on available data on concentrations of PFCs in river water, exposure to PFOS, PFOA and PFDA via water consumption for different age groups were calculated using deterministic and probabilistic risk assessment methods. The oral non-cancer risks from PFOS, PFOA and their combination, expressed as a Hazard Index (HI), was determined by comparing oral exposure dose (through water intake) with the oral Reference Dose (RfD). The average exposure to PFOS, PFOA and PFDA via water consumption for adults ranged from 0.16 to 220.15, 0.43 to 12.5 and 0.43 to 2.36 ng kg-bw^?1 d^?1 and for children 0.13–354.3, 0.35–20.17 and 0.35–3.79 ng kg-bw^?1 d^?1, respectively. Probabilistic values of total HIs for all age groups reside near to Keya River exceed the RfD 2.4–4.8 times, corresponding mainly to PFOS with a percentage of 97%. In conclusions, children aged 1–3 years old and the residents reside near to Keya River are at the highest risk of exposure to PFCs via water consumption.     

Polychlorinated biphenyls (PCBs) in fish from the Sana River (Bosnia and Herzegovina): A preliminary study on the health risk in sport fishermen

Fish is the main single source of polychlorinated biphenyls (PCBs) exposure in men. Anecdotal reports suggest high wild fish consumption rates among sport fishermen in Sanski Most area, Bosnia and Herzegovina (BiH). Presence of PCBs in the environment in BiH was previously documented. The main objective of this work was to estimate the magnitude of PCBs exposure and assess the potential health risk in sport fishermen in Sanski Most. The fishing pattern and magnitude of fish consumption were estimated in the questionnaire survey conducted during April 2012 among members (n = 60) of the local sport fishermen association in Sanski Most. Calculated median and high-end (90th percentile) fish consumption rates were 31 g d^?1 and 126 g d^?1, respectively. The PCB concentrations (as Aroclor 1254 equivalents), determined by ELISA immunoassay in 28 fish fillets ranged from undetectable to 208 μg kg^?1. Two different exposure scenarios were used: (a) median exposure, calculated from the median fish consumption rate and median PCB concentrations, and (b) “worst case” scenario, calculated from the high-end fish consumption rate and mean PCB concentrations. The results suggest negligible lifelong cancer and non-cancer risks in case of low to moderate fish consumption rate, but possibly unacceptable risk levels in high-end consumers.     

Selection of non-dioxin-like PCBs for in vitro testing on the basis of environmental abundance and molecular structure

The non-dioxin-like polychlorinated biphenyls (NDL-PCBs) constitute the major proportion of PCBs found in food and human tissues. It is important to improve our understanding of the toxicity, environmental and human risks associated with the NDL-PCBs, since their toxicology is incompletely characterized and a human health risk assessment is required. This paper discusses the selection of a training set of 20 tri- to hepta-chlorinated biphenyls, PCBs 19,28,47,51,52,53,74,95,100,101,104,118,122,128,136,138,153,170,180, and 190. Suggested for comprehensive screening using in vitro assays to identify critical mechanisms of toxicological action. The selected PCBs form a balanced basis for developing of quantitative structure-activity relationship (QSAR) models for prediction of physicochemical and toxicological properties of non-tested PCB congeners. Chemical and physical properties, environmental abundance and toxicological activities of the congeners were considered during the selection process. A complementary set of PCBs, a reference set, was selected using D-optimal onion design including PCBs 18,20,28,30,37,40,50,54,60,77,82,99,122,132,153,161,170,188,192, and 193. Congeners of this set are well suited for validation of QSAR models developed using the training set. For visualization of the chemical diversity of environmentally abundant PCBs and congeners of the training and reference sets, principal component analysis (PCA) was used. Statistical molecular design was used to verify the structural representation. As a reference structure for dioxin-like PCBs, PCB 126 was added in the training set. The selected set of NDL-PCBs is proposed for use in toxicological testing programs to provide rational basis for risk assessment of the NDL-PCBs.     

Bioaccumulation of PCBs in the cuttlefish Sepia officinalis from seawater, sediment and food pathways

The cuttlefish Sepia officinalis was selected as a model cephalopod to study PCB bioaccumulation via seawater, sediments and food. Newly hatched, juvenile cuttlefish were exposed for 17 days to environmentally realistic concentrations of (14)C-labeled 2,2',4,4',5,5'-hexachlorobiphenyl (PCB#153) (18 ng PCB l(-1) seawater; 30 ng PCB g(-1) dry wt sediments; Artemia salina exposed to 18 ng PCB l(-1) seawater). Accumulation of PCB#153 was followed in three body compartments: digestive gland, cuttlebone and the combined remaining tissues. Results showed that (1) uptake kinetics were source- and body compartment-dependent, (2) for each body compartment, the accumulation was far greater when S. officinalis was exposed via seawater, (3) the cuttlebone accumulated little of the contaminant regardless of the source, and (4) the PCB congener showed a similar distribution pattern among the different body compartments following exposure to contaminated seawater, sediment or food with the lowest concentrations in the cuttlebone and the highest in the remaining tissues. The use of radiotracer techniques allowed delineating PCB kinetics in small whole organisms as well as in their separate tissues. The results underscore the enhanced ability of cephalopods to concentrate organic pollutants such as PCBs, and raise the question of potential risk to their predators in contaminated areas.     

Residues of dioxins and PCBs in fat of growing pigs and broilers fed contaminated feed

To investigate the kinetics of PCBs and dioxins, 3 week old broilers and 3 month old pigs were fed with a 10-fold diluted feed from the Belgium crisis for one week, followed by a period on clean feed. In the case of broilers this resulted in levels for dioxins, non-ortho and mono-ortho PCBs in fat of 102, 84 and 216 ng TEQ/kg, summarized to 402 ng TEQ/kg. Total levels decreased to 217 and 109 ng TEQ/kg after 1 and 3 weeks on clean feed. Indicator PCB levels decreased from an initial 6.2 mg/kg fat to respectively 3.2 and 1.5 mg/kg. The ratio of indicator PCBs to dioxins TEQs was stable over this period. Levels in back fat of pigs at the end of the exposure period were 26, 15, 82 and 123 ng TEQ/kg for respectively dioxins, non-ortho PCBs, mono-ortho PCBs and the sum. Total TEQ levels decreased to respectively 95, 70, 40, 22 and 12 ng TEQ/kg after 1, 2, 4, 8 or 12 weeks on clean feed. After 12 weeks dioxin levels were around 1 ng TEQ/kg. Indicator PCB levels decreased from 3.48 mg/kg to 2.65, 2.01, 1.25, 0.76 and 0.45 mg/kg fat, again after 1, 2, 4, 8 or 12 weeks on clean feed. Levels of dioxins decreased more rapidly than those of indicator PCBs, also reflected by the ratio of indicator PCBs to dioxins, being 133,000 at the end of the exposure period and 357,000 after week 12. It is concluded that the use of indicator PCBs for dioxins, in the case of a combined exposure, is a safe alternative for screening and in the case of pigs results in an overestimation rather than underestimation of the dioxin levels.     

Incidence of thyroid disease following exposure to polybrominated biphenyls and polychlorinated biphenyls, Michigan, 1974-2006

Thyroid hormones, which influence body metabolism and development, could be affected by persistent organic pollutants. We sought to examine the relationship between polybrominated biphenyls (PBBs) and polychlorinated biphenyls (PCBs) and thyroid disease. We employed incidence density sampling to perform a nested case control analysis of the Michigan Long-Term PBB Cohort. Cohort members (n = 3333) were exposed to PBBs through contaminated cattle feed in 1973-1974 and to PCBs through daily life. Those with detectable serum PBB and PCB concentrations at enrollment were categorized into tertiles of PBB and PCB exposure. Case-patients were cohort members answering “Yes” to “Has a healthcare provider ever told you that you had a thyroid problem?” during follow-up interviews; control-patients were cohort members answering “No”. We used odds ratios (OR) with 95% confidence intervals (CI) to compare odds of thyroid disease by PBB and PCB exposure and by various risk factors. Total cumulative thyroid disease incidence after 33 years was 13.9% among women and 2.6% among men. After adjusting for body mass index, we found no statistically significant differences in odds of any type of thyroid disease among women or men with elevated PBB or PCB exposure. Compared to control-patients, women with thyroid disease had increased odds of being overweight/obese (OR = 2.82, 95% CI: 1.94-4.11) and developing infertility (OR = 1.71, 95% CI: 1.08-2.69), diabetes (OR = 1.61, 95% CI: 1.04-2.51), or arthritis (OR = 1.71, 95% CI: 1.18-2.50) during follow-up. Additional research should explore potential associations between PBBs/PCBs and thyroid disease among children exposed in utero.     

PCB and dioxin-like PCB in indoor air of public buildings contaminated with different PCB sources--deriving toxicity equivalent concentrations from standard PCB congeners

Data on dioxin-like PCB in indoor air of buildings with PCB-containing materials and on possible correlation between toxicity equivalent concentrations (TEQ) and levels of non-dioxin-like standard PCB is sparse. As part of a larger survey on indoor-air contamination with PCB, the connection between the concentration of standard PCB congeners and the dioxin-like toxicity expressed as TEQ was investigated. Indoor air samples (n=8) were collected in four public buildings with known PCB sources and total PCB levels in the range from 715 to 2250 ng/m3 and analyzed for the six non-dioxin-like standard PCB (congeners 28, 52, 101, 138, 153, 180), the twelve dioxin-like PCB congeners according to WHO and the 17 2,3,7,8-substituted PCDD/PCDF congeners. In three buildings where PCB were used as flame retardant coatings of acoustic ceiling tiles, PCB 101 had the maximum level among the six standard PCB, while in the building with permanent elastic sealants as PCB source, congeners 28 and 52 dominated the pattern by far. In the case of permanent elastic sealants as PCB source (n=3) a total PCB concentration of 1000 ng/m3 corresponded to a total TEQ level of 0.3-0.6 pg/m3. In contrast, in rooms with acoustic ceiling tiles as PCB source, 1.8-4.7 pg TEQ/m3 per 1000 ng total PCB/m3 were found. Linear regression analysis between PCB and TEQ indicated that PCB 118 might be used to calculate the total TEQ of dioxin-like PCB and PCDD/PCDF. By means of such a correlation it is possible to estimate TEQ by extrapolation from the results of less sophisticated analytical methods. It is tentatively recommended to use PCB 118 for screening purposes or re-evaluation of standard PCB indoor-air measurements. If only the six non-dioxin-like PCB standard congeners are available, a regression algorithm using the sum of PCB 101, 138, 153 and 180 might be used instead.     

Distribution patterns of nitrobenzenes and polychlorinated biphenyls in water, suspended particulate matter and sediment from mid- and down-stream of the Yellow River (China)

Samples of water, suspended particulate matter (SPM) and sediment were collected from mid- and down-stream of the Yellow River. The distribution and concentration of 10 nitroaromatic compounds and polychlorinated biphenyls (PCBs) were extensively studied. The total concentration of 10 nitrobenzenes (SigmaNBs) varied from 0.269 to 9.052 microg l(-1) in water, from 2.916 to 164.4 microg kg(-1) dry weight in SPM, and from 0.954 to 14.72 microg kg(-1) dry weight in sediment. PCBs associated with the sediments, measured as the summed responses of Aroclor 1242, 1248, 1254, 1260 (in comparison to those of a standard 1:1:1:1 mixture), were found to be in the range of non-detectable to 5.98 microg kg(-1). In the samples collected, various PCB congeners showed similar distribution characteristics with congeners containing 3-5 chlorine atoms accounting for more than 96.4% of total PCB. In most of the samples, PCB concentrations occurred in the order: TetraCB > TriCB > PentaCB. Levels of SigmaNBs in the Yellow River were relatively low in comparison with values reported from other river and marine systems, and PCB levels were comparatively low. Relative to the PCBs, SigmaNBs showed significantly more difference among the various stations, presumably due to the influence of different pollution sources. No obvious correlation was observed between the pollutant concentrations and either the TOC or the grain size of the sediments.     

Effect of photosensitizer diethylamine on the photodegradation of polychlorinated biphenyls

The objective of this study was to investigate the effect of diethylamine and xenon simulated sunlight on the photodegradation of two forms of PCBs including PCBs in transformer oil and PCB congener 138. The result of GC chromatograms illustrated the shifting pattern of higher chlorinated biphenyls in transformer oil degraded to lower chlorinated biphenyls with the extension of exposure time. The effect of diethylamine and xenon simulated sunlight was significant on the photodegradation of both PCBs in transformer oil and congener 138. The initial degradation rates of congener 138 (1.14 x 10(-9) to 4.47 x 10(-9) mol l(-1) h(-1)) were in direct proportion to the initial concentrations of congener 138 which confirmed the pseudo-first-order reaction of PCB photodegradation. The apparent quantum yields (phi) of congener 138 using diethylamine in xenon photoreactor were ranged between 2.08 x 10(-2) and 9.8 x 10(-4). PCB congeners 123, 97, 70, 67, 33, 29, 17, 12, and 9 were detected as the descendants of the photodegradation of congener 138 through dechlorination. The major pathway of congener 138 photodegradation in this study was via para-dechlorination.     

Dietary exposure to polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and polychlorinated biphenyls of the French population: Results of the second French Total Diet Study

Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) bioaccumulate through the food chain and are therefore of public health concern. Exposure to these compounds was assessed in the second French Total Diet Study (TDS). Food samples (n=583) were collected to be representative of the whole diet of the population, prepared as consumed, and analyzed. Contamination data were combined with national individual food consumption data. Mean exposure (95th percentile) to PCDD/F+DL-PCBs was assessed to be 0.57 (1.29) pg TEQ(WHO-98) (kg bw)(-1) d(-1) in the adult population and 0.89 (2.02) pg TEQ(WHO-98) (kg bw)(-1) d(-1) in the child and teenager population. Less than 4% of the population exceeded the health-based guidance value for PCDD/F+DL-PCBs. Mean exposure (95th percentile) to the six indicator PCBs (PCB 28, 52, 101, 138, 153, 180) was estimated at 2.71 (7.90) ng (kg bw)(-1) d(-1) in the adult population and 3.77 (11.7) ng (kg bw)(-1) d(-1) in the child and teenager population. Only 2.6% of the adults [CI(95%): 1.9; 3.3] and 6.5% of the children and teenagers [5.2; 7.8] exceeded the health-based guidance value for total PCBs. These results show that the contamination levels in food and therefore the exposure of the general French population to PCDD/Fs and PCBs have declined (by a factor of 3.2 for PCDD/F+DL-PCBs and about three for total PCBs) since the last evaluation, which was conducted using another methodology in 2005 and 2007, and show the efficiency of the European risk management measures which came into force after these evaluations.