湿法脱硫石膏浆液的品质及其控制措施

从脱硫工艺原理入手,以石膏浆液品质分析为基础,研究影响石膏浆液品质的因素,并提出石膏浆液品质控制措施,对湿法脱硫系统的设计和运行具有一定的指导意义.     

石灰石/石膏湿法烟气脱硫金属浆液循环泵国产化研究及实践

介绍了襄樊五二五泵业有限公司成功开发烟气脱硫金属浆液循环泵的相关成果，包括泵的水力模型、结构、机械密封、材料的研究等。经工业性考核和鉴定，该泵已完全可以实现我国50～600MW火电机组湿法脱硫装置的各种金属浆液循环泵的国产化。     

湿法脱硫多因素引起的浆液恶化原因分析及处理措施

在石灰石—石膏湿法脱硫系统中,吸收塔浆液恶化是系统运行经常出现的问题,浆液恶化不仅易影响浆液pH值,降低系统的脱硫效率,还会造成脱硫副产物石膏脱水困难。为此,结合2×600 MW机组湿法脱硫系统浆液恶化问题,通过检测与分析探讨了引起浆液品质变差的原因,并提出了解决措施。     

浅析石灰石浆液品质调节方法与制浆系统节能

燃煤电厂烟气脱硫技术以石灰石/石膏法为主,制浆系统是其重要组成之一。以金湾电厂2×600MW机组石灰石/石膏湿法脱硫制浆系统为例,介绍了石灰石浆液品质调节方法及制浆系统节能措施。     

脱硫吸收塔在线pH计的技术改造

介绍了脱硫系统在线pH计的测量原理和吸收塔浆液的特性,分析了湿法烟气脱硫系统浆液pH值测量不准的原因,具体讲解了改造过程中遇到的难点和实施方案的要点.     

FGD系统中吸收塔浆液起泡溢流的原因分析及解决办法

在石灰石-石膏湿法烟气脱硫（FGD）工艺系统中,吸收塔浆液溢流是较为常见的现象,它对FGD系统的稳定运行非常不利。通过分析产生吸收塔浆液溢流的各种原因,提出解决吸收塔浆液溢流的办法,保证脱硫系统的稳定运行。     

湿法烟气脱硫系统测量仪表的选用

根据脱硫仪表的工作特点，阐述了湿法烟气脱硫系统选择测量仪表的原则，以供脱硫工程师了解仪表特性。并供选型时参考。     

多炉一塔湿法脱硫系统石膏脱水环节探讨

通过对脱硫吸收塔内五个区浆液的综合分析,讨论了石膏脱水系统环节的设计,结合天津第一热电厂脱硫工程,分析了各脱水设备在不同工艺流程中的选择条件,提出了一种湿法脱硫过程中浆液分配器的改进设计。     

基于国外实践借鉴的ESCO融资结构优化效益提升策略架构

EPC模式下既有建筑节能改造市场发展的基础是ESCO项目融资,既有建筑ESCO项目融资结构优化是实现融资效益的有效途径。基于国外既有建筑节能改造项目融资特点与经验梳理,探讨我国既有建筑节能改造项目融资结构优化的有益启迪,提出基于融资结构优化的ESCO项目融资效益提升策略：提升自身融资能力,降低ESCO项目融资风险;构建既改项目融资链,拓宽ESCO项目融资渠道;建立融资结构优化机制,提高ESCO项目融资效益;完善社会信用体系,降低ESCO项目融资成本。以期以既有建筑节能改造ESCO项目融资结构优化来增强融资有效性,驱动既有建筑节能改造市场健康有序发展。     

既有建筑绿色改造项目ESCO决策实践特征与策略研究

既有建筑绿色改造是落实节能减排目标、实现可持续发展战略的必由之路,ESCO是城市低碳转型的重要推手。基于项目治理视角,从法律法规构建、经济政策激励、能效标识制度、技术集成创新等方面概述了国外既有建筑节能改造项目治理成功经验。分析我国既有建筑节能改造项目治理实践现状,总结我国既有建筑绿色改造项目ESCO决策困境和原因,以推动我国既有建筑绿色改造事业蓬勃发展。     

石灰石／石灰-石膏湿法脱硫浆液溢流问题研究

在火电厂石灰石／石灰一石膏湿法脱硫系统中,吸收塔浆液溢流是运行过程中常见的问题之一,它对FGD系统的稳定运行非常不利。分析了吸收塔浆液溢流的成因,介绍了浆液溢流对FGD系统运行的危害,提出了吸收塔浆液溢流的预防和处理措施。     

湿法脱硫石灰石制浆系统的比选

石灰石制浆系统被广泛应用于燃煤电厂石灰石／石膏湿法烟气脱硫系统中。对典型的湿磨制浆和石灰石粉制浆系统从工艺流程特点、设备组成、技术经济等方面进行详细的分析比较。考虑到1000MW机组工程石灰石耗量较大,从电厂长期运行角度考虑,推荐采用技术成熟、运行经济的石灰石湿磨制浆方案,同时要加强湿磨制浆系统的日常维护和管理：     

A multi-echelon supply chain model for municipal solid waste management system

In this paper, a multi-echelon multi-period solid waste management system (MSWM) was developed by inoculating with multi-echelon supply chain. Waste managers, suppliers, industries and distributors could be engaged in joint strategic planning and operational execution. The principal of MSWM system is interactive planning of transportation and inventory for each organization in waste collection, delivery and disposal. An efficient inventory management plan for MSWM would lead to optimized productivity levels under available capacities (e.g., transportation and operational capacities). The applicability of the proposed system was illustrated by a case with three cities, one distribution and two waste disposal facilities. Solutions of the decision variable values under different significant levels indicate a consistent trend. With an increased significant level, the total generated waste would be decreased, and the total transported waste through distribution center to waste to energy and landfill would be decreased as well.     

绿色建筑供应链主导企业结构模型与运行实践分析

建筑可持续发展涉及多主体全过程,实施有效途径是构建绿色建筑供应链,基于绿色供应链理念构建绿色建筑供应链结构模型,分析绿色建筑供应链特点,界定绿色建筑供应链协调运行的主体职责,架构绿色建筑供应链主导企业及其基于主导企业驱动的绿色建筑供应链结构模型,剖析绿色建筑供应链运行实践问题,提出基于主导企业驱动的绿色建筑供应链协调运行的内在要求。     

湿法脱硫吸收塔浆液pH值异常情况处理

针对钱清发电公司石灰石-石膏湿法脱硫吸收塔浆液pH值异常现象,进行了向浆液中加入Ca(OH)2、查找石灰石粉、工艺水、烟气成分等影响因素的试验.确定了本次吸收塔浆液pH值异常的真正原因是由于系统中缺少足够的石膏晶种或晶种未长大.试验中发现:石膏晶种在pH值为4.2左右时,经过2～3天的培养,也同样可获得石灰石-石膏湿法脱硫系统正常运行所需的石膏晶种.     

Strategies for improving recycling behaviour within the Cornwall National Health Service (NHS) in the UK.

This paper examines strategies for improving recycling behaviour within the Cornwall National Health Service (NHS). Using quantitative (questionnaires and waste bin analyses) and qualitative (ethnography and interviews) methodologies, the study examined the waste management practices of staff from the Cornwall NHS. It was found that employee participation in waste recycling at work was low due to a range of factors including NHS focus and policies, group norms, and individual attitudes and beliefs about sustainable waste management. Recommendations for improving the sustainability of NHS, employee waste management practices, with a specific focus on recycling are included in the paper. These recommendations include measures focused towards both the NHS organization and individual staff members.     

MBM fuel feeding system design and evaluation for FBG pilot plant

A biomass fuel feeding system has been designed, constructed and evaluated for a fluidized bed gasifier (FBG) pilot plant at the University of Saskatchewan (Saskatoon, SK, Canada). The system was designed for meat and bone meal (MBM) to be injected into the gasifier at a mass flow-rate range of 1-5 g/s. The designed system consists of two stages of screw conveyors, including a metering stage which controlled the flow-rate of fuel, a rotary airlock and an injection conveyor stage, which delivered that fuel at a consistent rate to the FBG. The rotary airlock which was placed between these conveyors, proved unable to maintain a pressure seal, thus the entire conveying system was sealed and pressurized. A pneumatic injection nozzle was also fabricated, tested and fitted to the end of the injection conveyor for direct injection and dispersal into the fluidized bed. The 150 mm metering screw conveyor was shown to effectively control the mass output rate of the system, across a fuel output range of 1-25 g/s, while the addition of the 50mm injection screw conveyor reduced the irregularity (error) of the system output rate from 47% to 15%. Although material plugging was found to be an issue in the inlet hopper to the injection conveyor, the addition of air sparging ports and a system to pulse air into those ports was found to successfully eliminate this issue. The addition of the pneumatic injection nozzle reduced the output irregularity further to 13%, with an air supply of 50 slpm as the minimum air supply to drive this injector. After commissioning of this final system to the FBG reactor, the injection nozzle was found to plug with char however, and was subsequently removed from the system. Final operation of the reactor continues satisfactorily with the two screw conveyors operating at matching pressure with the fluidized bed, with the output rate of the system estimated based on system characteristic equations, and confirmed by static weight measurements made before and after testing. The error rate by this method is reported to be approximately 10%, which is slightly better than the estimated error rate of 15% for the conveyor system. The reliability of this measurement prediction method relies upon the relative consistency of the physical properties of MBM with respect to its bulk density and feeding characteristics.     

湿法烟气脱硫喷嘴布置计算机辅助设计系统的研发

采用Visual C 工具对湿法烟气脱硫喷嘴布置AutoCAD进行二次开发，并对开发出的喷嘴布置计算机辅助设计系统的原理、设计方法及技术进行了研究。结果表明，开发系统可靠性强、操作简单、界面可视化，极大地提高了喷嘴布置的设计效率和质量。     

湿式球磨机石灰石制浆系统的运行调整及问题探讨

探讨了以湖南石门、河南国电濮热、贵州大龙等电厂湿式球磨机运行中的部分调整经验，并对一些影响运行的问题进行分析，以寻求合理的运行方式，实现脱硫系统长周期经济运行。