Assessment of surface water quality using multivariate statistical techniques: a case study of Behrimaz Stream, Turkey

Multivariate statistical techniques, such as cluster analysis (CA), principal component analysis, and factor analysis, were applied for the evaluation of temporal/spatial variations and for the interpretation of a water quality data set of the Behrimaz Stream, obtained during 1 year of monitoring of 20 parameters at four different sites. Hierarchical CA grouped 12 months into two periods (the first and second periods) and classified four monitoring sites into two groups (group A and group B), i.e., relatively less polluted (LP) and medium polluted (MP) sites, based on similarities of water quality characteristics. Factor analysis/principal component analysis, applied to the data sets of the two different groups obtained from cluster analysis, resulted in five latent factors amounting to 88.32% and 88.93% of the total variance in water quality data sets of LP and MP areas, respectively. Varifactors obtained from factor analysis indicate that the parameters responsible for water quality variations are mainly related to discharge, temperature, and soluble minerals (natural) and nutrients (nonpoint sources: agricultural activities) in relatively less polluted areas; and organic pollution (point source: domestic wastewater) and nutrients (nonpoint sources: agricultural activities and surface runoff from villages) in medium polluted areas in the basin. Thus, this study illustrates the utility of multivariate statistical techniques for analysis and interpretation of data sets and, in water quality assessment, identification of pollution sources/factors and understanding temporal/spatial variations in water quality for effective stream water quality management.     

Assessment of water quality using multivariate statistical techniques in the coastal region of Visakhapatnam,India

The present study was intended to develop a Water Quality Index (WQI) for the coastal water of Visakhapatnam, India from multiple measured water quality parameters using different multivariate statistical techniques. Cluster analysis was used to classify the data set into three major groups based on similar water quality characteristics. Discriminant analysis was used to generate a discriminant function for developing a WQI. Discriminant analysis gave the best result for analyzing the seasonal variation of water quality. It helped in data reduction and found the most discriminant parameters responsible for seasonal variation of water quality. Coastal water was classified into good, average, and poor quality considering WQI and the nutrient load. The predictive capacity of WQI was proved with random samples taken from coastal areas. High concentration of ammonia in surface water during winter was attributed to nitrogen fixation by the phytoplankton bloom which resulted due to East India Coastal Current. This study brings out the fact that water quality in the coastal region not only depends on the discharge from different pollution sources but also on the presence of different current patterns. It also illustrates the usefulness of WQI for analyzing the complex nutrient data for assessing the coastal water and identifying different pollution sources, considering reasons for seasonal variation of water quality.     

Evaluation of surface water quality characteristics by using multivariate statistical techniques: A case study of the Euphrates river basin, Turkey

The surface water quality of the Euphrates river basin in Turkey are evaluated by using the multivariate statistical techniques known as factor analysis (FA) and multidimensional scaling (MDS) analysis. When FA was applied to the water quality data obtained from the 15 different surface water quality monitoring stations, two factors were identified, which were responsible from the 86.02% of the total variance of the water quality in the Euphrates river basin. The first factor called the urban land use factor explained 44.20% of the total variance and the second factor called the agricultural use factor explained 41.81% of the total variance. MDS technique showed that electrical conductivity (EC), percent sodium (Na%) and total salt are the most important variables causing difference in the water quality analysis.     

Assessment of anthropogenic sources of water pollution using multivariate statistical techniques: a case study of the Alqueva’s reservoir, Portugal

Multivariate statistical techniques were applied to evaluate spatial/temporal variations, and to interpret water quality data set obtained at Alqueva reservoir (south of Portugal). The water quality was monitored at nine different sites, along the water line, over a period of 18 months (from January 2006 to May 2007) using 26 water quality parameters. The cluster analysis allowed the formation of five different similarity groups between sampling sites, reflecting differences on the water quality at different locations of the Alqueva reservoir system. The PCA/FA identified six varifactors, which were responsible for 64% of total variance in water quality data set. The principal parameters, which explained the variability of quality water, were total phosphorus, oxidability, iron, parameters that at high concentrations indicate pollution from anthropogenic sources, and herbicides indicative of an intensive agricultural activity. The spatial analysis showed that the water quality was worse in the north of the reservoir.     

Application of multivariate statistical techniques in the assessment of surface water quality in Uluabat Lake, Turkey

The application of different multivariate statistical approaches for the interpretation of a complex data matrix obtained during the period 2004-2005 from Uluabat Lake surface water is presented in this study. The dataset consists of the analytical results of a 1 year-survey conducted in 12 sampling stations in the Lake. Twelve parameters (T, pH, DO, [Formula: see text], NH(4)-N, NO(2)-N, NO(3)-N, [Formula: see text], BOD, COD, TC, FC) were monitored in the sampling sites on a monthly basis (except December 2004, January and February 2005, a total of 1,296 observations). The dataset was treated using cluster analysis, principle component analysis and factor analysis on principle components. Cluster analysis revealed two different groups of similarities between the sampling sites, reflecting different physicochemical properties and pollution levels in the studied water system. Three latent factors were identified as responsible for the data structure, explaining 77.35% of total variance in the dataset. The first factor called the microbiological factor explained 32.34% of the total variance. The second factor named the organic-nutrient factors explained 25.46% and the third factor called physicochemical factors explained 19.54% of the variances, respectively.     

Assessing soil quality indicator under different land use and soil erosion using multivariate statistical techniques

Soil degradation associated with soil erosion and land use is a critical problem in Iran and there is little or insufficient scientific information in assessing soil quality indicator. In this study, factor analysis (FA) and discriminant analysis (DA) were used to identify the most sensitive indicators of soil quality for evaluating land use and soil erosion within the Hiv catchment in Iran and subsequently compare soil quality assessment using expert opinion based on soil surface factors (SSF) form of Bureau of Land Management (BLM) method. Therefore, 19 soil physical, chemical, and biochemical properties were measured from 56 different sampling sites covering three land use/soil erosion categories (rangeland/surface erosion, orchard/surface erosion, and rangeland/stream bank erosion). FA identified four factors that explained for 82 % of the variation in soil properties. Three factors showed significant differences among the three land use/soil erosion categories. The results indicated that based upon backward-mode DA, dehydrogenase, silt, and manganese allowed more than 80 % of the samples to be correctly assigned to their land use and erosional status. Canonical scores of discriminant functions were significantly correlated to the six soil surface indices derived of BLM method. Stepwise linear regression revealed that soil surface indices: soil movement, surface litter, pedestalling, and sum of SSF were also positively related to the dehydrogenase and silt. This suggests that dehydrogenase and silt are most sensitive to land use and soil erosion.     

Assessment of surface water quality using a growing hierarchical self-organizing map: a case study of the Songhua River Basin,northeastern China,from 2011 to 2015

The analysis of a large number of multidimensional surface water monitoring data for extracting potential information plays an important role in water quality management. In this study, growing hierarchical self-organizing map (GHSOM) was applied to a water quality assessment of the Songhua River Basin in China using 22 water quality parameters monitored monthly from 13 monitoring sites from 2011 to 2015 (14,782 observations). The spatial and temporal features and correlation between the water quality parameters were explored, and the major contaminants were identified. The results showed that the downstream of the Second Songhua River had the worst water quality of the Songhua River Basin. The upstream and midstream of Nenjiang River and the Second Songhua River had the best. The major contaminants of the Songhua River were chemical oxygen demand (COD), ammonia nitrogen (NH₃-N), total phosphorus (TP), and fecal coliform (FC). In the Songhua River, the water pollution at downstream has been gradually eased in years. However, FC and biochemical oxygen demand (BOD₅) showed growth over time. The component planes showed that three sets of parameters had positive correlations with each other. GHSOM was found to have advantages over self-organizing maps and hierarchical clustering analysis as follows: (1) automatically generating the necessary neurons, (2) intuitively exhibiting the hierarchical inheritance relationship between the original data, and (3) depicting the boundaries of the classification much more clearly. Therefore, the application of GHSOM in water quality assessments, especially with large amounts of monitoring data, enables the extraction of more information and provides strong support for water quality management.     

Use of water quality index and multivariate statistical techniques for the assessment of spatial variations in water quality of a small river

Rapid urban development has led to a critical negative impact on water bodies flowing in and around urban areas. In the present study, 25 physiochemical and biological parameters have been studied on water samples collected from the entire section of a small river originating and ending within an urban area. This study envisaged to assess the water quality status of river body and explore probable sources of pollution in the river. Weighted arithmetic water quality index (WQI) was employed to evaluate the water quality status of the river. Multivariate statistical techniques namely cluster analysis (CA) and principal component analysis (PCA) were applied to differentiate the sources of variation in water quality and to determine the cause of pollution in the river. WQI values indicated high pollution levels in the studied water body, rendering it unsuitable for any practical purpose. Cluster analysis results showed that the river samples can be divided into four groups. Use of PCA identified four important factors describing the types of pollution in the river, namely (1) mineral and nutrient pollution, (2) heavy metal pollution, (3) organic pollution, and (4) fecal contamination. The deteriorating water quality of the river was demonstrated to originate from wide sources of anthropogenic activities, especially municipal sewage discharge from unplanned housing areas, wastewater discharge from small industrial units, livestock activities, and indiscriminate dumping of solid wastes in the river. Thus, the present study effectively demonstrates the use of WQI and multivariate statistical techniques for gaining simpler and meaningful information about the water quality of a lotic water body as well as to identify of the pollution sources.     

Evaluation of spatial and temporal variations in marine sediments quality using multivariate statistical techniques

Spatial and temporal variations of sediment quality in Matanzas Bay (Cuba) were studied by determining a total of 12 variables (Zn, Cu, Pb, As, Ni, Co, Al, Fe, Mn, V, CO₃ ^2?, and total hydrocarbons (THC). Surface sediments were collected, annually, at eight stations during 2005–2008. Multivariate statistical techniques, such as principal component (PCA), cluster (CA), and lineal discriminant (LDA) analyses were applied for identification of the most significant variables influencing the environmental quality of sediments. Heavy metals (Zn, Cu, Pb, V, and As) and THC were the most significant species contributing to sediment quality variations during the sampling period. Concentrations of V and As were determined in sediments of this ecosystem for the first time. The variation of sediment environmental quality with the sampling period and the differentiation of samples in three groups along the bay were obtained. The usefulness of the multivariate statistical techniques employed for the environmental interpretation of a limited dataset was confirmed.     

Assessment of domestic water quality: case study, Beirut, Lebanon

In urban cities, the environmental services are the responsibility of the public sector, where piped water supply is the norm for urban household. Likewise, in Beirut City (capital of Lebanon) official water authorities are the main supplier of domestic water through a network of piping system that leaks in many areas. Beirut City and its suburbs are overpopulated since it is the residence of 1/3 of the Lebanese citizens. Thus, Beirut suffers deficiency in meeting its water demand. Water rationing, as a remedial action, is firmly established since four decades by the Lebanese Water Authorities. Consumers resorted then to private wells to supplement their domestic water needs. Consequently, household water quality is influenced by external factors relating to well water characteristics and internal factors depending on the types of the pipes of the distribution network and cross connections to sewer pipes. These factors could result in chemical and microbial contamination of drinking water. The objective of this study is to investigate domestic water quality variation in Beirut City emerging form the aforementioned factors. The presented work encircles a typical case study of Beirut City (Ras Beirut). Results showed deterioration pattern in domestic water quality. The predicted metal species and scales within the water pipes of distribution network depended on water pH, hardness, sulfate, chloride, and iron. The corrosion of iron pipes mainly depended on Mg hardness.     

Assessment of anthropogenic influences on surface water quality in urban estuary, northern New Jersey: multivariate approach

Concentrations of selected heavy metals (Cd, Cr, Cu, Pb, Ni, Fe, and Zn), nutrients (NO ₃ ^? and NH₃), fecal coliform colonies, and other multiple physical–chemical parameters were measured seasonally from 12 locations in an urban New Jersey estuary between 1994 and 2008. Stepwise regression, principal component analysis, and cluster analysis were used to group water quality results and sampling locations, as well as to assess these data’s relationship to sewage treatment effluents and the distance to the mouth of the river. The BOD₅, NH₃, NO ₃ ^? and fecal coliform counts clustered as one group and positively correlated to the distances from treated effluent and the measures of magnitude at the discharge points. Dissolved solids and most metal species scored high along a single principal component axes and were significantly correlated with the proximity to the industrialized area. From these data, one can conclude that the effluent discharge has been a main source of anthropogenic input to the Hackensack River over the past 15 years. Therefore, the greatest improvement to water quality would come from eliminating the few remaining combined sewer overflows and improving the removal of nutrients from treated effluents before they are discharged into the creeks and river.     

Assessment of water quality of some swimming pools: a case study in Alexandria, Egypt

In spite of the importance and popularity of swimming pools in summer, they have been identified as posing some public health risks to users due to either chemical or microbiological contamination. This study was carried out aiming at assessing the quality of water for some Alexandria's swimming pools in order to determine its compliance with the Egyptian standards no. 418/1995. Five swimming pools were selected randomly from different districts. Physical and chemical parameters, as well as biological examination of a total of 30 samples, were carried out using standard analytical methods. Water samples were collected from the studied swimming pools monthly over 6?months and pool water monitoring was carried out during afternoon of the weekends when the pools were most heavily used. The results indicated overall poor compliance with the standards. Compliance of the pool water to the microbial parameters, residual chlorine, pH, and turbidity were 56.7% (17 samples), 20% (6 samples), 46.7% (14 samples), and 46.7% (14 samples), respectively. Statistical analysis showed significant association between water contamination with microbial indicators and physical–chemical aspects such as residual chlorine, temperature, turbidity, and load of swimmers. Furthermore, Cryptosporidium oocysts and Giardia lamblia cysts has been found in 10% of samples. It was concluded that there is a need to improve disinfection and cleaning procedures, with consideration given to safety, and size of the pool in relation to bathing load. There is also a need to monitor swimming pool water quality continuously, and to increase bather hygienic practices and awareness of the risks as well as training of governmental inspectors.     

Assessment of temporal and spatial water quality in international Gomishan Lagoon,Iran, using multivariate analysis

Coastal lagoon ecosystems are vulnerable to eutrophication, which leads to the accumulation of nutrients from the surrounding watershed over the long term. However, there is a lack of information about methods that could accurate quantify this problem in rapidly developed countries. Therefore, various statistical methods such as cluster analysis (CA), principal component analysis (PCA), partial least square (PLS), principal component regression (PCR), and ordinary least squares regression (OLS) were used in this study to estimate total organic matter content in sediments (TOM) using other parameters such as temperature, dissolved oxygen (DO), pH, electrical conductivity (EC), nitrite (NO₂), nitrate (NO₃), biological oxygen demand (BOD), phosphate (PO₄), total phosphorus (TP), salinity, and water depth along a 3-km transect in the Gomishan Lagoon (Iran). Results indicated that nutrient concentration and the dissolved oxygen gradient were the most significant parameters in the lagoon water quality heterogeneity. Additionally, anoxia at the bottom of the lagoon in sediments and re-suspension of the sediments were the main factors affecting internal nutrient loading. To validate the models, R², RMSECV, and RPDCV were used. The PLS model was stronger than the other models. Also, classification analysis of the Gomishan Lagoon identified two hydrological zones: (i) a North Zone characterized by higher water exchange, higher dissolved oxygen and lower salinity and nutrients, and (ii) a Central and South Zone with high residence time, higher nutrient concentrations, lower dissolved oxygen, and higher salinity. A recommendation for the management of coastal lagoons, specifically the Gomishan Lagoon, to decrease or eliminate nutrient loadings is discussed and should be transferred to policy makers, the scientific community, and local inhabitants.     

Assessment of water quality using cluster analysis in coastal region of Mumbai, India

The coastal water quality of Mumbai is deteriorating due to various point and non-point wastewater sources. Hence, it is desirable to monitor coastal water quality for various water-related activities like bathing, contact water sports, recreation, and commercial fishing. The objective of this paper is to assess the seasonal water quality on the basis of seawater standards. Based on water-quality analysis of 17 seafronts and beaches, most of the parameters were exceeding the standards. The statistical cluster analysis was carried out for evaluating impact of wastewater and sewage discharges. The hierarchical cluster analysis resulted into three clustered groups, namely less polluted, moderately polluted, and highly polluted sites with similar characteristics of water quality. Mahim was found to be worst-affected beach due to incoming organic load from the Mithi river in comparison to other seafronts and beaches. Unaccounted sources of sewage and wastewater should be identified and rerouted through sewerage system by improving collection efficiency, treatment, and proper disposal for achieving designated receiving water quality standards.     

Application of multivariate statistical techniques in the assessment of water quality in the Southwest New Territories and Kowloon, Hong Kong

The application of different multivariate statistical techniques for the interpretation of a complex data matrix obtained during 2000?C2007 from the watercourses in the Southwest New Territories and Kowloon, Hong Kong was presented in this study. The data set consisted of the analytical results of 23 parameters measured monthly at 16 different sampling sites. Hierarchical cluster analysis grouped the 12 months into two periods and the 16 sampling sites into three groups based on similarity in water quality characteristics. Discriminant analysis (DA) provided better results both temporally and spatially. DA also offered an important data reduction as it only used four parameters for temporal analysis, affording 84.2% correct assignations, and eight parameters for spatial analysis, affording 96.1% correct assignations. Principal component analysis/factor analysis identified four latent factors standing for organic pollution, industrial pollution, nonpoint pollution, and fecal pollution, respectively. KN1, KN4, KN5, and KN7 were greatly affected by organic pollution, industrial pollution, and nonpoint pollution. The main pollution sources of TN1 and TN2 were organic pollution and nonpoint pollution, respectively. Industrial pollution had high effect on TN3, TN4, TN5, and TN6.     

Multivariate statistical techniques for the assessment of seasonal variations in surface water quality of pasture ecosystems

This study investigates the applicability of multivariate statistical techniques including cluster analysis (CA), discriminant analysis (DA), and factor analysis (FA) for the assessment of seasonal variations in the surface water quality of tropical pastures. The study was carried out in the TPU catchment, Kuala Lumpur, Malaysia. The dataset consisted of 1-year monitoring of 14 parameters at six sampling sites. The CA yielded two groups of similarity between the sampling sites, i.e., less polluted (LP) and moderately polluted (MP) at temporal scale. Fecal coliform (FC), NO₃, DO, and pH were significantly related to the stream grouping in the dry season, whereas NH₃, BOD, Escherichia coli, and FC were significantly related to the stream grouping in the rainy season. The best predictors for distinguishing clusters in temporal scale were FC, NH₃, and E. coli, respectively. FC, E. coli, and BOD with strong positive loadings were introduced as the first varifactors in the dry season which indicates the biological source of variability. EC with a strong positive loading and DO with a strong negative loading were introduced as the first varifactors in the rainy season, which represents the physiochemical source of variability. Multivariate statistical techniques were effective analytical techniques for classification and processing of large datasets of water quality and the identification of major sources of water pollution in tropical pastures.