Sulfonated graphene nanomaterials for membrane antifouling,pollutant removal,and production of chemicals from biomass: a review

Water pollution and the unsustainable use of fossil fuel derivatives require advanced catalytic methods to clean waters and to produce fine chemicals from modern biomass. Classical homogeneous catalysts such as sulfuric, phosphoric, and hydrochloric acid are highly corrosive and non-recyclable, whereas heterogeneous catalysts appear promising for lignocellulosic waste depolymerization, pollutant degradation, and membrane antifouling. Here, we review the use of sulfonated graphene and sulfonated graphene oxide nanomaterials for improving membranes, pollutant adsorption and degradation, depolymerization of lignocellulosic waste, liquefaction of biomass, and production of fine chemicals. We also discuss the economy of oil production from biomass. Sulfonated graphene and sulfonated graphene oxide display an unusual large theoretical specific surface area of 2630 m²/g, allowing the reactants to easily enter the internal surface of graphene nanosheets and to reach active acid sites. Sulfonated graphene oxide is hydrophobic and has hydrophilic groups, such as hydroxyl, carboxyl, and epoxy, thus creating cavities on the graphene nanosheet’s surface. The adsorption capacity approached 2.3–2.4 mmol per gram for naphthalene and 1-naphthol. Concerning membranes, we observe an improvement of hydrophilicity, salt rejection, water flux, antifouling properties, and pollutant removal. The nanomaterials can be reused several times without losing catalytic activity due to the high stability originating from the stable carbon–sulfur bond between graphene and the sulfonic group.

     

Conversion of waste plastics into value-added carbon materials

Plastic pollution is a major environmental issue worldwide, calling for advanced methods to recycle waste plastics in the context of the circular economy. Here we review methods and strategies to convert waste plastics into value-added carbon materials, with focus on sources, properties, pretreatment of waste plastics, and on preparation of carbon materials. Pretreatment techniques include mechanical crushing, plastic stabilization and electrospinning. Carbon materials such as carbon nanotubes, graphene, carbon nanosheets, carbon spheres and porous carbon are prepared by oxygen-limited carbonization, catalytic carbonization, the template-based method, and pressure carbonization. We emphasize the conversion of polyethene terephthalate, polyethylene, polypropylene, polystyrene, halogenated plastics, polyurethane and mixed plastics.

     

Optimizing biomass pathways to bioenergy and biochar application in electricity generation,biodiesel production,and biohydrogen production

The current energy crisis, depletion of fossil fuels, and global climate change have made it imperative to find alternative sources of energy that are both economically sustainable and environmentally friendly. Here we review various pathways for converting biomass into bioenergy and biochar and their applications in producing electricity, biodiesel, and biohydrogen. Biomass can be converted into biofuels using different methods, including biochemical and thermochemical conversion methods. Determining which approach is best relies on the type of biomass involved, the desired final product, and whether or not it is economically sustainable. Biochemical conversion methods are currently the most widely used for producing biofuels from biomass, accounting for approximately 80% of all biofuels produced worldwide. Ethanol and biodiesel are the most prevalent biofuels produced via biochemical conversion processes. Thermochemical conversion is less used than biochemical conversion, accounting for approximately 20% of biofuels produced worldwide. Bio-oil and syngas, commonly manufactured from wood chips, agricultural waste, and municipal solid waste, are the major biofuels produced by thermochemical conversion. Biofuels produced from biomass have the potential to displace up to 27% of the world's transportation fuel by 2050, which could result in a reduction in greenhouse gas emissions by up to 3.7 billion metric tons per year. Biochar from biomass can yield high biodiesel, ranging from 32.8% to 97.75%, and can also serve as an anode, cathode, and catalyst in microbial fuel cells with a maximum power density of 4346 mW/m². Biochar also plays a role in catalytic methane decomposition and dry methane reforming, with hydrogen conversion rates ranging from 13.4% to 95.7%. Biochar can also increase hydrogen yield by up to 220.3%.

     

Polylactic acid synthesis,biodegradability, conversion to microplastics and toxicity: a review

Global pollution by plastics derived from petroleum has fostered the development of carbon–neutral, biodegradable bioplastics synthesized from renewable resources such as modern biomass, yet knowledge on the impact of bioplastics on ecosystems is limited. Here we review the polylactic acid plastic with focus on synthesis, biodegradability tuning, environmental conversion to microplastics, and impact on microbes, algae, phytoplankton, zooplankton, annelids, mollusk and fish. Polylactic acid is a low weight semi-crystalline bioplastic used in agriculture, medicine, packaging and textile. Polylactic acid is one of the most widely used biopolymers, accounting for 33% of all bioplastics produced in 2021. Although biodegradable in vivo, polylactic acid is not completely degradable under natural environmental conditions, notably under aquatic conditions. Polylactic acid disintegrates into microplastics faster than petroleum-based plastics and may pose severe threats to the exposed biota.

     

Applicability of Montreal Process Criterion 5 — maintenance of rangeland contribution to global carbon cycles

SUMMARY

Within the Montreal Process, Criterion 5 — Maintenance of Forest Contribution to the Global Carbon Cycle — encompasses: Indicator 26, biomass and carbon pools; Indicator 27, carbon fluxes from these pools; and Indicator 28, contribution of forest products. I have reviewed the applicability of each indicator to rangelands, the potential limitations of these indicators for rangelands ecosystems, the data available to quantify these indicators and have identified research needs. Indicator 26, and 27 are applicable to rangeland ecosystems. Estimation of the total ecosystem biomass and carbon pools from rangelands is currently feasible, albeit precision is limited by data availability. Simulation models quantify fluxes from rangeland ecosystems, however, belowground dynamics, particularly under changing management, are not well known. For Indicator 28, rangeland products do not constitute a large potential for carbon sequestration.     

Algal biomass valorization for biofuel production and carbon sequestration: a review

The world is experiencing an energy crisis and environmental issues due to the depletion of fossil fuels and the continuous increase in carbon dioxide concentrations. Microalgal biofuels are produced using sunlight, water, and simple salt minerals. Their high growth rate, photosynthesis, and carbon dioxide sequestration capacity make them one of the most important biorefinery platforms. Furthermore, microalgae's ability to alter their metabolism in response to environmental stresses to produce relatively high levels of high-value compounds makes them a promising alternative to fossil fuels. As a result, microalgae can significantly contribute to long-term solutions to critical global issues such as the energy crisis and climate change. The environmental benefits of algal biofuel have been demonstrated by significant reductions in carbon dioxide, nitrogen oxide, and sulfur oxide emissions. Microalgae-derived biomass has the potential to generate a wide range of commercially important high-value compounds, novel materials, and feedstock for a variety of industries, including cosmetics, food, and feed. This review evaluates the potential of using microalgal biomass to produce a variety of bioenergy carriers, including biodiesel from stored lipids, alcohols from reserved carbohydrate fermentation, and hydrogen, syngas, methane, biochar and bio-oils via anaerobic digestion, pyrolysis, and gasification. Furthermore, the potential use of microalgal biomass in carbon sequestration routes as an atmospheric carbon removal approach is being evaluated. The cost of algal biofuel production is primarily determined by culturing (77%), harvesting (12%), and lipid extraction (7.9%). As a result, the choice of microalgal species and cultivation mode (autotrophic, heterotrophic, and mixotrophic) are important factors in controlling biomass and bioenergy production, as well as fuel properties. The simultaneous production of microalgal biomass in agricultural, municipal, or industrial wastewater is a low-cost option that could significantly reduce economic and environmental costs while also providing a valuable remediation service. Microalgae have also been proposed as a viable candidate for carbon dioxide capture from the atmosphere or an industrial point source. Microalgae can sequester 1.3 kg of carbon dioxide to produce 1 kg of biomass. Using potent microalgal strains in efficient design bioreactors for carbon dioxide sequestration is thus a challenge. Microalgae can theoretically use up to 9% of light energy to capture and convert 513 tons of carbon dioxide into 280 tons of dry biomass per hectare per year in open and closed cultures. Using an integrated microalgal bio-refinery to recover high-value-added products could reduce waste and create efficient biomass processing into bioenergy. To design an efficient atmospheric carbon removal system, algal biomass cultivation should be coupled with thermochemical technologies, such as pyrolysis.

     

Biomass and carbon budgeting of sustainable agroforestry systems as ecosystem service in Indian Himalayas

Adoption of agroforestry is paramount as a climate change mitigation and adaptation strategy. The assessment of plant biomass is crucial for understanding the vulnerability of biological systems to climate change. In the present study, agroforestry systems viz., agrisilviculture (AS), agrihorticulture (AH), agrihortisilviculture (AHS) and agrisilvihorticulture (ASH) were investigated for biomass production and carbon stock in vegetation as well as in soil in the Indian central Himalaya along the elevation i.e. E₁ (<1100 m), E₂ (1100–1400 m), E₃ (1400–1700 m), E₄ (1700–2000 m) and E₅ (>2000 m). Mean aboveground and belowground biomass were 73.9% and 26.1%, respectively, of total biomass (64.4 t ha^?1) in agroforestry systems. Fodder and/or timber trees accounted for 31% (in AHS) to 74% (in AS) of total biomass, while fruit trees accounted for 18% (in ASH) to 73% (in AH) of total biomass. The contribution of agriculture crops to total biomass fluctuated between 19% (in ASH) and 26% (in AH). Total vegetation biomass, soil carbon and total carbon density in agroforestry systems increased significantly along the elevation, with maximum biomass at elevation E₅ (32.0 t ha^?1, 64.7 t C ha^?1 and 96.7 t C ha^?1). Total biomass of vegetation among agroforestry systems differed significantly. Soil carbon stock was highest in AHS (59.5 t C ha^?1) and total carbon density (vegetation + soil) was highest in ASH (93.0 t C ha^?1). Thus, in Indian Himalayas, vegetation biomass, carbon stock, soil and total carbon (vegetation + soil) stock increased along the elevation.

Abbrviations: AG: aboveground; BG: belowground; WD: wood density; VOB: volume over bark; BEF: biomass expansion factor; AS: agrisilviculture; AH: agrihorticulture; ASH: agrisilvihorticulture; AHS: agrihortisilviculture; E: elevation; C: carbon; CO₂: carbon-di-oxide; IPCC: Intergovernmental Panel on Climate Change; DBH: diameter at breast height; AGBD: aboveground biomass density; BGBD: belowground biomass density; GSVD: growing stock volume density     

Seaweed for climate mitigation,wastewater treatment,bioenergy, bioplastic,biochar, food,pharmaceuticals, and cosmetics: a review

The development and recycling of biomass production can partly solve issues of energy, climate change, population growth, food and feed shortages, and environmental pollution. For instance, the use of seaweeds as feedstocks can reduce our reliance on fossil fuel resources, ensure the synthesis of cost-effective and eco-friendly products and biofuels, and develop sustainable biorefinery processes. Nonetheless, seaweeds use in several biorefineries is still in the infancy stage compared to terrestrial plants-based lignocellulosic biomass. Therefore, here we review seaweed biorefineries with focus on seaweed production, economical benefits, and seaweed use as feedstock for anaerobic digestion, biochar, bioplastics, crop health, food, livestock feed, pharmaceuticals and cosmetics. Globally, seaweeds could sequester between 61 and 268 megatonnes of carbon per year, with an average of 173 megatonnes. Nearly 90% of carbon is sequestered by exporting biomass to deep water, while the remaining 10% is buried in coastal sediments. 500 gigatonnes of seaweeds could replace nearly 40% of the current soy protein production. Seaweeds contain valuable bioactive molecules that could be applied as antimicrobial, antioxidant, antiviral, antifungal, anticancer, contraceptive, anti-inflammatory, anti-coagulants, and in other cosmetics and skincare products.

     

Interaction of carbonaceous nanomaterials with wastewater biomass

Increasing production and use of carbonaceous nanomaterials (NMs) will increase their release to the sewer system and to municipal wastewater treatment plants. There is little quantitative knowledge on the removal of multi-walled carbon nanotubes (MWCNTs), graphene oxide (GO), or few-layer graphene (FLG) from wastewater into the wastewater biomass. As such, we investigated the quantification of GO and MWCNTs by UV-Vis spectrophotometry, and FLG using programmable thermal analysis (PTA), respectively. We further explored the removal of pristine and oxidized MWCNTs (O-MWCNTs), GO, and FLG in a biomass suspension. At least 96% of pristine and O-MWCNTs were removed from the water phase through aggregation and 30-min settling in presence or absence of biomass with an initial MWCNT concentration of 25 mg·L⁻¹. Only 65% of GO was removed with biomass concentration at or above 1,000 mg·L⁻¹ as total suspended solids (TSS) with the initial GO concentration of 25 mg·L⁻¹. As UV-Vis spectrophotometry does not work well on quantification of FLG, we studied the removal of FLG at a lower biomass concentration (50 mg TSS·L⁻¹) using PTA, which showed a 16% removal of FLG with an initial concentration of 1 mg·L⁻¹. The removal data for GO and FLG were fitted using the Freundlich equation (R² = 0.55, 0.94, respectively). The data presented in this study for carbonaceous NM removal from wastewater provides quantitative information for environmental exposure modeling and life cycle assessment.     

Cost,environmental impact,and resilience of renewable energy under a changing climate: a review

Energy derived from fossil fuels contributes significantly to global climate change, accounting for more than 75% of global greenhouse gas emissions and approximately 90% of all carbon dioxide emissions. Alternative energy from renewable sources must be utilized to decarbonize the energy sector. However, the adverse effects of climate change, such as increasing temperatures, extreme winds, rising sea levels, and decreased precipitation, may impact renewable energies. Here we review renewable energies with a focus on costs, the impact of climate on renewable energies, the impact of renewable energies on the environment, economy, and on decarbonization in different countries. We focus on solar, wind, biomass, hydropower, and geothermal energy. We observe that the price of solar photovoltaic energy has declined from $0.417 in 2010 to $0.048/kilowatt-hour in 2021. Similarly, prices have declined by 68% for onshore wind, 60% for offshore wind, 68% for concentrated solar power, and 14% for biomass energy. Wind energy and hydropower production could decrease by as much as 40% in some regions due to climate change, whereas solar energy appears the least impacted energy source. Climate change can also modify biomass productivity, growth, chemical composition, and soil microbial communities. Hydroelectric power plants are the most damaging to the environment; and solar photovoltaics must be carefully installed to reduce their impact. Wind turbines and biomass power plants have a minimal environmental impact; therefore, they should be implemented extensively. Renewable energy sources could decarbonize 90% of the electricity industry by 2050, drastically reducing carbon emissions, and contributing to climate change mitigation. By establishing the zero carbon emission decarbonization concept, the future of renewable energy is promising, with the potential to replace fossil fuel-derived energy and limit global temperature rise to 1.5 °C by 2050.

     

Materials,fuels, upgrading,economy, and life cycle assessment of the pyrolysis of algal and lignocellulosic biomass: a review

Climate change issues are calling for advanced methods to produce materials and fuels in a carbon–neutral and circular way. For instance, biomass pyrolysis has been intensely investigated during the last years. Here we review the pyrolysis of algal and lignocellulosic biomass with focus on pyrolysis products and mechanisms, oil upgrading, combining pyrolysis and anaerobic digestion, economy, and life cycle assessment. Products include oil, gas, and biochar. Upgrading techniques comprise hot vapor filtration, solvent addition, emulsification, esterification and transesterification, hydrotreatment, steam reforming, and the use of supercritical fluids. We examined the economic viability in terms of profitability, internal rate of return, return on investment, carbon removal service, product pricing, and net present value. We also reviewed 20 recent studies of life cycle assessment. We found that the pyrolysis method highly influenced product yield, ranging from 9.07 to 40.59% for oil, from 10.1 to 41.25% for biochar, and from 11.93 to 28.16% for syngas. Feedstock type, pyrolytic temperature, heating rate, and reaction retention time were the main factors controlling the distribution of pyrolysis products. Pyrolysis mechanisms include bond breaking, cracking, polymerization and re-polymerization, and fragmentation. Biochar from residual forestry could sequester 2.74 tons of carbon dioxide equivalent per ton biochar when applied to the soil and has thus the potential to remove 0.2–2.75 gigatons of atmospheric carbon dioxide annually. The generation of biochar and bio-oil from the pyrolysis process is estimated to be economically feasible.

     

Carbon sequestration potential of Rhizophora mucronata and Avicennia marina as influenced by age, season, growth and sediment characteristics in southeast coast of India

This work analysed the carbon sequestration potential in two species of mangroves (Rhizophora mucronata and Avicennia marina) along with their growth, biomass, sediment characteristics for four seasons of the year 2009–2010, in planted stands of different age (1–17.5 years) in the Vellar-Coleroon estuarine complex, India. The mangroves were recorded to store significant amount of biomass. Avicennia marina performed better to display 75 % higher rate of carbon sequestration than that in Rhizophora mucronata. This could be attributed to growth efficiency and high biomass production. For instance, Avicennia marina exhibited 2.7 fold higher girth, 24 % higher net canopy photosynthesis, 2 fold aboveground biomass (AGB), 40 % more belowground biomass (BGB) and 77.3 % higher total biomass, than R. mucronata did. Seasonally the rate of carbon sequestration was 7.3 fold higher in post-monsoon, 3.4 fold in monsoon, 73 % more in summer than that in pre-monsoon. The rate of carbon sequestration was positively correlated with age of planted site, tree height, tree diameter, net canopy photosynthesis, AGB, BGB, total biomass, carbon stock, growth efficiency, AGB/tree height tree girth, leaf area index, silt content (p?<?0.01). The carbon sequestration was negatively corrected with soil temperature and clay content (p?<?0.05). Mangroves were found to be a productive system and important sink of carbon in the tropical coastal zone, but increasing soil temperature due to global warming would have a negative impact on carbon sequestration potential of the mangroves.     

Variation in soil organic carbon mineralization and microbial community structure induced by the conversion from double rice fields to drained fields北大核心CSCD

Land use conversion is an important factor influencing the carbon gas exchange between land and atmosphere. The effect of land use conversion on soil organic carbon mineralization and microbial function is important for soil organic carbon sequestration and stability. This research studied the effects of land use conversion on soil chemical properties, organic carbon mineralization and microbial community structure after two years of conversion from double rice cropping (RR) to maize-maize (MM) and soybean-peanut (SP) double cropping systems in southern China. The results showed that soil pH significantly decreased by 0.50 (MM) and 0.52 (SP, P = 0.002), and dissolved organic carbon significantly increased by 23%- 35% (P = 0.016). No significant difference was found in soil organic carbon mineralization rate with the land use conversion, though the accumulated mineralization decreased after 13 days of incubation (P = 0.019). Land use conversion from paddy to upland significantly changed soil microbial community structure. The total PLFAs, bacterial, gram-positive bacterial (G+), gram-negative bacterial (G-) and actinomycetic PLFAs decreased significantly (P < 0.05), the ratio of fungal PLFAs to bacterial PLFAs (F/B) increased significantly (P = 0.006). But no significant differences in microbial groups were found between MM and SP. The accumulated mineralization at the beginning period of the incubation were significantly positively correlated with soil actinomycetic PLFAs (P = 0.034). After 13 days of incubation, soil F/B showed a positive correlation with the accumulated mineralization (P = 0.004). However, soil microbial community structure(P = 0.014)and total PLFAs(P = 0.033)showed a positive correlation with the accumulated mineralization after 108 days of incubation. Our results indicated that after conversion from paddy soils to drained soils, soil pH and total nitrogen are the key factors regulating the variations in soil microbial community structure and biomass, and then influencing soil organic carbon mineralization.     

Carbon black-benzo(a)pyrene complex-induced apoptosis and autophagy blockage in rat alveolar macrophages

Abstract

Cooking of foods and the burning of biomass and fossil fuels in stoves are the main sources of cooking fumes, with carbon black and polycyclic aromatic hydrocarbons as main components. The toxicity of carbon black and polycyclic aromatic hydrocarbons has been well studied individually, but the combined toxicity is much less understood. Carbon black can adsorb benzo(a)pyrene to form a complex which displays an altered physical form which in this study has been constructed to simulate particles in the cooking fumes and explore the combined toxic effect on rat alveolar macrophages. The complex-induced cell apoptosis and blocked cell autophagy flux compared with both individually. The mechanism of toxicity may be by intracellular reactive oxygen species generation, impairing the mitochondrial membrane potential and activating apoptosis signaling pathways.     

Estimating carbon flux to pelagic grazers in the ice-edge zone of the eastern Bering Sea

Zooplankton ingestion of phytoplankton carbon in the iceedge zone of the Eastern Bering Sea was measured using a deck incubation approach in 1982. Using further samples collected in 1983, the plant cell carbon to cell volume ratio was estimated at 0.0604 pg m^–3 from an experimentally determined particulate carbon to seston volume relationship. The application of this conversion to the results of experimental incubations of natural plant stocks with net-caught zooplankton produced ingestion rates of 68.8 and 10.26 mg C g^–1 grazer d^–1 for copepods and euphausiids, respectively. Extrapolating these rates to in situ zooplankton biomass at the edge of the seasonal ice pack yielded carbon flux rates through the zooplankton community ranging between 6.5 and 32.8 mg C m^–2 d^–1. This consumption amounted to less than 2% of the daily phytoplankton production in the ice-edge zone.     

Synthesis and potential applications of cyclodextrin-based metal–organic frameworks: a review

Metal–organic frameworks are porous polymeric materials formed by linking metal ions with organic bridging ligands. Metal–organic frameworks are used as sensors, catalysts for organic transformations, biomass conversion, photovoltaics, electrochemical applications, gas storage and separation, and photocatalysis. Nonetheless, many actual metal–organic frameworks present limitations such as toxicity of preparation reagents and components, which make frameworks unusable for food and pharmaceutical applications. Here, we review the structure, synthesis and properties of cyclodextrin-based metal–organic frameworks that could be used in bioapplications. Synthetic methods include vapor diffusion, microwave-assisted, hydro/solvothermal, and ultrasound techniques. The vapor diffusion method can produce cyclodextrin-based metal–organic framework crystals with particle sizes ranging from 200 nm to 400 μm. Applications comprise food packaging, drug delivery, sensors, adsorbents, gas separation, and membranes. Cyclodextrin-based metal–organic frameworks showed loading efficacy of the bioactive compounds ranging from 3.29 to 97.80%.

     

Microheterotrophic utilization of mucus released by the Mediterranean coral Cladocora cespitosa

The amount of mucus released by the Mediterranean coral Cladocora cespitosa (L.) was determined in laboratory experiments and the incorporation of mucus into bacterial biomass was investigated by means of incubation experiments in 1984. Mean mucus release was 8.5 g (mucus dry wt) pclyp^-1 h^-1 and amounted to 44% of the respiratory carbon losses of the coral since mean organic carbon content of freshly collected mucus was 102.2g C mg (mucus dry wt)^-1. Due to the abundance of C. cespitosa in the shallow littoral of the Bight of Piran, the energy content of mucus released is estimated to correspond to about 20% of the phytoplankton primary production in this area. Furthermore, the carbon conversion efficiency of 20% obtained from the bacterial population during decomposition of mucus indicates the high nutritional value of C. cespitosa mucus, although bacterial carbon onto mucus particles contributes less than 0.1% to the total organic carbon pool of the mucus.     

A new method for estimating phytoplankton growth rates and carbon biomass

A new method is described for the determination of phytoplankton growth rates and carbon biomass. This procedure is easy to apply and utilizes the labeling of chlorophyll a (chl a) with ¹⁴C. Pure chl a is isolated using two-way thin-layer chromatography, and the specific activity of chl a carbon is determined. Data from laboratory cultures indicate that the specific activity of chl a carbon becomes nearly equal to that of total phytoplankton carbon in incubations lasting 6 to 12 h and can be used to calculate phytoplankton growth rates and carbon biomass. Application of the method to the phytoplankton community in an eutrophic estuary in Hawaii indicates that the cells are growing with a doubling time of about 2 d and that about 85% of the particulate carbon consists of phytoplankton carbon.     

The role of black carbon as a catalyst for environmental redox transformation

Black carbon (BC) is an important class of geosorbents that control the fate and transport of organic pollutants in soil and sediment. We previously demonstrated a new role of BC as an electron transfer mediator in the abiotic reduction of nitroaromatic and nitramine compounds by Oh and Chiu (Environ Sci Technol 43:6983–6988, 2009). We proposed that BC can catalyze the reduction of nitro compounds because it contains microscopic graphitic (graphene) domains, which facilitate both sorption and electron transfer. In this study, we assessed the ability of different types of BC—graphite, activated carbon, and diesel soot—to mediate the reduction of 2,4-dinitrotoluene (DNT) and 2,4-dibromophenol (DBP) by H₂S. All three types of BC enhanced DNT and DBP reduction. H₂S supported BC-mediated reduction, as was observed previously with a thiol reductant. The results suggest that BC may influence the fate of organic pollutants in reducing subsurface environments through redox transformation in addition to sorption.

     

Improving the redox performance of photocatalytic materials by cascade-type charge transfer: a review

Environmental and energy crises are a major threat to the sustainable growth of the human society, calling for greener technologies such as photocatalysis. Photocatalysis is a solar-driven approach that converts photon energy into chemical energy, yet the conversion efficacy of classical photocatalysis is usually restricted and controlled by the charge carrier’s separation and migration. Enhanced conversion requires suppressed recombination rate and superior redox abilities. From this aspect, the manipulation of heterojunction allows to overcome the drawback of classical photocatalysis. The cascade mechanism follows a dual direct charge migration route, resulting in enhanced redox abilities and efficient mineralization of pollutants. Here, we review photocatalytic material aspects in improving redox ability by cascade charge transfer. We describe the mechanisms and applications of three cascade systems: two type-II cascade systems, mediator-based cascade systems, and dual direct Z-scheme. We highlight the superiority of the direct dual cascade route with a prolonged lifetime of carriers, higher quantum yield, and enhanced redox abilities. Applications to carbon dioxide reduction, hydrogen production by water splitting and pollutant degradation are discussed.