Assessing Anchor Damage on Coral Reefs: A Case Study in Selection of Environmental Indicators

Because environmental conservation can remove scarce natural resources from competing uses, it is important to gain support for conservation programs by demonstrating that management actions have been effective in achieving their goals. One way to do this is to show that selected significant environmental variables (indicators) vary between managed and unmanaged areas or change over time following implementation of a management regime. However, identifying indicators that reflect environmental conditions relevant to management practices has proven difficult. This paper focuses on developing a framework for choosing indicators in a coral reef habitat. The framework consisted of three phases: (1) information gathering to identify candidate variables; (2) field-testing candidate variables at sites that differ in intensity of human activity, thus identifying potential indicators; and (3) evaluating potential indicators against a set of feasibility criteria to identify the most useful indicators. To identify indicators suitable to measure the success of a management strategy to reduce anchor damage to a coral reef, 24 candidate variables were identified and evaluated at sites with different intensities of anchoring. In this study, measures that reflected injuries to coral colonies were generally more efficient than traditional measures of coral cover in describing the effects of anchoring. The number of overturned colonies was identified as the single most useful indicator of coral reef condition associated with anchoring intensities. The indicator selection framework developed here has the advantages of being transparent, cost efficient, and readily transferable to other types of human activities and management strategies.     

Enduring decisions: Evaluating environmental impacts for sustainability planning

This paper aims to establish a framework in which potential methods for evaluating environmental impacts can be considered, with particular reference to the UK planning system. To do this a number of complementary ways of conceptualising sustainable development and making it more practical are outlined. Some basic arguments about the meaning of sustainability are reviewed; and some common misconceptions about the concept exposed. The concept of sustainability constraints is outlined and a functional distinction between quantitative and qualitative constraints is proposed. The adoption of sustainability constraints based on measures of environmental capacity is proposed. These suggest significant reductions in consumption of most environmental resources. The efficiency and sufficiency strategies that would be needed to meet the proposed quantified constraints are outlined. In conclusion, evaluation processes and indicators of sustainability, including environmental foot-printing and environmental impact assessment, are discussed, offering some pointers towards the type of measures that will be needed to help implement sustainability strategies.     

Preliminary Strategic Environmental Assessment of the Great Western Development Strategy: Safeguarding Ecological Security for a New Western China

The Great Western Development Strategy (GWDS) is a long term national campaign aimed at boosting development of the western area of China and narrowing the economic gap between the western and the eastern parts of China. The Strategic Environmental Assessment (SEA) procedure was employed to assess the environmental challenges brought about by the western development plans. These plans include five key developmental domains (KDDs): water resource exploitation and use, land utilization, energy generation, tourism development, and ecological restoration and conservation. A combination of methods involving matrix assessment, incorporation of expert judgment and trend analysis was employed to analyze and predict the environmental impacts upon eight selected environmental indicators: water resource availability, soil erosion, soil salinization, forest destruction, land desertification, biological diversity, water quality and air quality. Based on the overall results of the assessment, countermeasures for environmental challenges that emerged were raised as key recommendations to ensure ecological security during the implementation of the GWDS. This paper is intended to introduce a consensus-based process for evaluating the complex, long term pressures on the ecological security of large areas, such as western China, that focuses on the use of combined methods applied at the strategic level.     

Evaluating sustainable forest management strategies with the Analytic Network Process in a Pressure-State-Response framework

Nowadays forestry faces a complex management situation; the understanding of sustainable forest management (SFM) has gone far beyond the original meaning of sustainable yield of timber. SFM strategies should fulfil ecological, economic and social functions without causing damage to other ecosystems. In this understanding, forest management actions cannot be seen as isolated or mono-causal. In this case study, indicators for SFM are arranged in a Pressure-State-Response (PSR) framework at forest management unit level. This framework links pressures on the environment caused by human activities with changes of environmental state (condition) parameters. Forest management also responds to these changes by instituting environmental and economic measures to reduce pressures and restore natural resources. The Analytic Network Process (ANP) is utilized to evaluate the performance of four management strategies with regard to the PSR framework on SFM. Priorities of indicators and alternatives are modelled with the ANP resulting from the interconnections to other indicators and their respective cumulative importance. The approach allows for more detailed information on the network of human influences and their impacts on forest ecosystems and goes beyond the limitations of flat-dimensioned indicator sets.     

Assessing the sustainability of forest management: An application of multi-criteria decision analysis to community forests in northern Ethiopia

Continuous deterioration of the natural resource base has become a serious threat to both the ecological systems and economic production in Ethiopia. Many of these problems have been attributed directly or indirectly to the rapid dwindling of the country's forest cover which is associated with unsustainable forest use and management. Closing community woodlands from human and livestock intervention to promote natural regeneration of forests has been one of the environmental restoration strategies pursued in the degraded highland areas of northern Ethiopia. However, local pressure to use reforested community lands for economic benefit has become a major threat to forest sustainability.Using locally identified sets of criteria and indicators for sustainable community forest management, this paper applies a multi-criteria decision analysis tool to evaluate forest management problems in the northern province of Tigray, Ethiopia. Three MCA methods – ranking, pair-wise comparison, and scoring – were used in evaluating the sets of criteria and indicators and alternative forest management scenarios.Results from the study indicate a number of noteworthy points: 1) MCA techniques both for identifying local level sustainability criteria and indicators and evaluating management schemes in a participatory decision environment appear to be effective tools to address local resource management problems; 2) Evaluated against the selected sets of criteria and indicators, the current forest management regime in the study area is not on a sustainable path; 3) Acquainting local people with adequate environmental knowledge and raising local awareness about the long-term consequences of environmental degradation ranked first among the set of sustainability criteria; and 4) In order to harmonize both environmental and economic objectives, the present ‘ecological-biased’ forest management regime needs to be substituted by an appropriate holistic scheme that takes into account stakeholders' multiple preferences and priority rankings.     

Farm management indicators and farm typologies as a basis for assessments in a changing policy environment

This paper focuses on the assessment of farm management indicators and argues that typologies are a necessary tool for comprehensive environmental assessments. In the paper Andersen et al., [(2004a). Farming and the Environment in the European Community--using agricultural statistics to provide farm management indicators. Paper presented at OECD Expert meeting, March 2004, New Zealand. < http:webdomino1.oecd.org/comnet/agr/farmind.nsf/viewHtml/index/$FILE/Anderson_et_al.PDF> (1st of February 2006).] presented at the OECD expert meeting on farm management indicators in New Zealand in March 2004, a set of farm management indicators was presented in the framework of a typology of grazing livestock farming systems in the EU-15 (includes all Member States of the European Union before 2004). The present paper presents new results on farm management indicators within the framework of an extended typology for all farming sectors. It presents an environmentally oriented extension to the EU typology of farms currently used for assessing the situation of farming within the European Union. The extended typology is tested in relation to emerging policy issues such as environmental sustainability and rural viability by analysing some of the farm management indicators suggested in Andersen et al., [(2004a). Farming and the Environment in the European Community--using agricultural statistics to provide farm management indicators. Paper presented at OECD Expert meeting, March 2004, New Zealand. (1st of February 2006).]. Finally, recommendations in relation to the next generation EU farm typology are given.     

中国大型发电上市公司ESG评价体系开发与分值研究

如今,世界各地上市公司正将利润最大化这一短期目标转向环境、社会及管治(ESG)可持续发展这一长期目标,更加清楚地认识到ESG已经构成了企业风险的重要来源之一,并可能影响公司的财务绩效。本文基于状态、压力、响应与层次分析(PSR-AHP)指标分类与权重配比方法构建中国大型发电上市公司ESG评级体系,并应用该评价体系对中国大型发电上市公司ESG绩效进行研究。结果发现,其ESG综合得分波动性大,在研究期最后两年走势不甚理想,其中社会绩效得分及其趋势表现优于环境及管治绩效;在环境及社会绩效方面,响应性指标表现优于压力性指标,而状态性指标走势较为稳定。最后,本文从披露深度及质量、第三方介入、奖惩及强制性披露措施等方面给出政策建议。     

Techno-economic analysis and environmental impact assessment of energy recovery from Municipal Solid Waste (MSW) in Brazil

Due to the lack of appropriate policies in the last decades, 60% of Brazilian cities still dump their waste in non-regulated landfills (the remaining ones dump their trash in regulated landfills), which represent a serious environmental and social problem. The key objective of this study is to compare, from a techno-economic and environmental point of view, different alternatives to the energy recovery from the Municipal Solid Waste (MSW) generated in Brazilian cities. The environmental analysis was carried out using current data collected in Betim, a 450,000 inhabitants city that currently produces 200 tonnes of MSW/day. Four scenarios were designed, whose environmental behaviour were studied applying the Life Cycle Assessment (LCA) methodology, in accordance with the ISO 14040 and ISO 14044 standards. The results show the landfill systems as the worst waste management option and that a significant environmental savings is achieved when a wasted energy recovery is done. The best option, which presented the best performance based on considered indicators, is the direct combustion of waste as fuel for electricity generation. The study also includes a techno-economical evaluation of the options, using a developed computer simulation tool. The economic indicators of an MSW energy recovery project were calculated. The selected methodology allows to calculate the energy content of the MSW and the CH₄ generated by the landfill, the costs and incomes associated with the energy recovery, the sales of electricity and carbon credits from the Clean Development Mechanism (CDM). The studies were based on urban centres of 100,000, 500,000 and 1,000,000 inhabitants, using the MSW characteristics of the metropolitan region of Belo Horizonte. Two alternatives to recovering waste energy were analyzed: a landfill that used landfill biogas to generate electricity through generator modules and a Waste-to-Energy (WtE) facility also with electricity generation. The results show that power generation projects using landfill biogas in Brazil strongly depend on the existence of a market for emissions reduction credits. The WtE plant projects, due to its high installation, Operation and Maintenance (O&M) costs, are highly dependent on MSW treatment fees. And they still rely on an increase of three times the city taxes to become attractive.     

Life cycle indicators for monitoring the environmental performance of European waste management

As widely recognised by EU legislation, Life Cycle Thinking (LCT) is a viable approach to support sound waste management choices. In this context, the Institute for Environment and Sustainability (IES) of the European Commission Joint Research Centre (JRC) has lead the development of macro-level, life cycle based waste management indicators to quantify and monitor the potential environmental impacts, benefits, and improvements associated with the management of a number of selected waste streams generated and treated in Europe.The waste management indicators developed make use of a combination of macro statistical waste management data combined with emissions/resource life cycle data for the different elements of the waste treatment chain. Indicators were initially calculated for the entire European Union (EU-27) and for Germany, covering several waste streams and a broad range of environmental impact categories.An indicator developed for a given waste stream captures the potential environmental impact associated with the generation and management of that waste stream. The entire waste management chain is considered, i.e. from generation to final treatment/disposal. Therefore, system boundaries for the selected waste streams include also the treatment or recycling of secondary waste (e.g. bottom ash from the incineration of household waste), and secondary products (e.g. recovered paper), as well as energy recovery.The experiences from the development of these life cycle based waste management indicators suggest that more detailed and quality-assured waste statistics are needed, especially covering the many different treatment operations and options. Also, it would be beneficial if waste statistics had a higher disaggregation level of waste categories, as well as more detailed information about waste composition. A further development of the indicators should include an increased number of waste streams, as well as calculation of the results for all Member States.     

Testing a Scandinavian Biodiversity Assessment Tool in an African Desert Environment

Life cycle assessment-based environmental product declarations (EPDs) require the inclusion of biodiversity impacts across the entire supply chain. The objective of this study is to test the applicability of a Scandinavian biodiversity assessment tool, developed specifically for use with EPD applications, in an African desert environment, linking the industry types power generation and mining. For this purpose, a GIS-based spatial analysis tool—the biotope method—was adapted to a framework approach which allowed the selection of more suitable, site-specific biodiversity indicators. The biotope method provides a step-by-step process of defining system boundaries, mapping biotopes, categorizing biotopes based on site-specific indicators, and evaluating change in biotope status “before” and “after” the impact. The development of site-specific indicators was piloted in this study and determined by the affected ecosystem and the status of knowledge on biodiversity in this geographic area. Thus plants were used as indicators for biodiversity, and red-list status and endemism constituted the prime criteria for conservation value of plants. This in turn represented the key criterion for classifying biotopes. The tested biodiversity assessment tool has potential for application in different environments and operational settings but leaves room for improvement by including secondary impacts in the assessment and using a wider range of taxa for indicators of biodiversity.     

The vertical integration of Lisbon and sustainable development strategies across the EU: How different governance architectures shape the European coherence of policy documents

In Europe, sustainable development (SD) is pursued with not one but two overarching strategies, i.e., the so-called Lisbon and SD strategies. While the Lisbon Strategy is a genuinely European response to global economic and social pressures, SD strategies are national efforts corresponding with international (mainly United Nations) guidance to better coordinate and integrate economic, social and, in particular, environmental policies. The present paper explores the vertical coordination and coherence of the two pan-European strategies. After reviewing the international background of SD strategies and the EU origins of the Lisbon strategy, the paper characterizes and compares the governance architectures of the two strategies. With a solid background on how vertical policy integration functions in the two processes, the paper then shows how this affects the coherence of respective strategy structures and monitoring indicators. Based on an extensive empirical stocktaking study of the objectives and indicators in Lisbon and SD strategies across Europe it is shown that, despite the stronger European coordination through the Open Method of Coordination, the Lisbon process entailed only slightly more coherent national strategies than international guidance did in the context of SD strategies. Thus, the paper concludes that the influence international organizations such as the UN and the OECD have on national policy-making must not be underestimated.     

Multi-angle Indicators System of Non-point Pollution Source Assessment in Rural Areas: A Case Study Near Taihu Lake

This study aims to identify key environmental risk sources contributing to water eutrophication and to suggest certain risk management strategies for rural areas. The multi-angle indicators included in the risk source assessment system were non-point source pollution, deficient waste treatment, and public awareness of environmental risk, which combined psychometric paradigm methods, the contingent valuation method, and personal interviews to describe the environmental sensitivity of local residents. Total risk values of different villages near Taihu Lake were calculated in the case study, which resulted in a geographic risk map showing which village was the critical risk source of Taihu eutrophication. The increased application of phosphorus (P) and nitrogen (N), loss vulnerability of pollutant, and a lack of environmental risk awareness led to more serious non-point pollution, especially in rural China. Interesting results revealed by the quotient between the scores of objective risk sources and subjective risk sources showed what should be improved for each study village. More environmental investments, control of agricultural activities, and promotion of environmental education are critical considerations for rural environmental management. These findings are helpful for developing targeted and effective risk management strategies in rural areas.     

Indicators for sustainable energy development in Mexico

This article presents a summary of a study on the application to the Mexican energy sector of a core set of indicators for sustainable energy development (ISED), developed by the International Atomic Energy Agency (IAEA). The study focused on the elaboration of socio‐economic and environmental indicators related to energy production and use, and was aimed at assessing Mexico's existing energy policies and identifying strategies and possible policies that could bring about improvements in major priority areas: energy intensity, atmospheric emissions, energy import dependency and use of renewables. While positive trends have been observed in relation to energy intensity and atmospheric emissions, Mexico is becoming more dependent on imports of gasoline, natural gas and other high‐value secondary energy sources, while exporting significant amounts of primary fuels, such as crude oil. Also, no significant increase has been observed in the use of renewable sources of energy. Social, economic and environmental policies need to be formulated for the energy sector and related investments (public and private) reinforced so that all economic sectors have access to energy from cleaner and more diverse sources.     

Construction and demolition waste generation and management in Lisbon (Portugal)

The management of construction and demolition waste (CDW) is essential in the formation, growth and renovation of urban areas. This paper presents part of a study on CDW generation and management in the Lisbon Metropolitan Area (LMA). CDW generation was estimated for 2006 and 2007 based on construction activity and waste load movements. The results revealed that in the municipality of Lisbon, remodeling construction activity prevailed, with CDW generation indicators of 954 t/day and a per capita rate of 0.60 t/year. Both values are above the average for the LMA and its two sub-regions (Greater Lisbon and the Setúbal Peninsula). The installed infrastructure for CDW management identified in the LMA is situated within a maximum distance of about 23 km from the geometric center of the city of Lisbon. Despite the fact these locations favor the municipality of Lisbon, the occurrence of illegal dumps is still a reality. A notable effort towards environmental education addressing CDW management is under way so as to make involved citizens aware of the recent CDW legislation, Decree-Law Nr. 46/2008, as well as of the problems arising from scenarios of environmental degradation and uncontrolled use of natural resources in the civil construction sector. Policies are outlined aiming to move towards the more judicious management of CDW.     

Environmental management information systems: New tools for measuring performance

Successful implementation of environmental management information systems (EMIS) has become essential to the success of total quality environmental management (TQEM) programs. Effective TQEM programs will be early indicators of which companies survive and thrive in today's competitive business environment. Highly competitive industries such as chemicals, electronics, and oil and gas are becoming very effective in cooperating to develop metrics, models, and tools that are based on business processes rather than regulatory edicts. Now electric power companies, newly exposed to market competition, are starting to develop and implement these metrics, standards, and tools. That industry provides a model for joining TQEM and EMIS.     

Environmental indicators for communication of life cycle impact assessment results and their applications

Life cycle impact assessment (LCIA) is performed to quantitatively evaluate all environmental impacts from products, systems, processes and services. However, LCIA does not always provide valuable information for choosing among alternatives with different specifications, functionalities and lifetimes. The objectives of this study are (1) to propose environmental indicators to evaluate environmental efficiency and value qualitatively and quantitatively on the basis of analogies to financial and economic indicators, and (2) to present the application of the indicators. Incremental evaluation using a reference is employed to obtain the environmental indicators. The environmental efficiency indicators are conceptually based on the ratios of reduced environmental burdens returned to environmental burdens required: environmental return on investment, environmental payback period and environmental internal rate of return. The environmental value indicator is the sum of all reduced and required environmental burdens: i.e., environmental net present value. All the environmental indicators can be used to compare and rank the environmental efficiencies or values of alternatives. The environmental efficiency indicators can be applied to a new environmental labeling. The concept of eco-efficiency labeling is developed by combining the environmental efficiency indicators with financial indicators. A case study is performed to illustrate the necessity and importance of the environmental indicators. These environmental indicators can help easily communicate LCIA results in the field of environmental management.     

Development of Indicators to Assess Economic Vulnerabilities to Changes in Ecosystem Services: Case Study of Counties in Maryland,USA

We develop indicators showing the relative environmental burdens that human activities place on locales for a given level of economic benefits. The main purpose is to develop tools that allow us to examine the potential vulnerabilities within economies to changes in resource conditions. The indicators of pollution emission or resource consumption per job can be used to identify potential challenges to resource and industry managers and to compare areas in terms of their ability to adapt to change. For example, if a large number of area jobs are dependent on abundant water, this indicates a vulnerability to a reduction in water availability for industrial use. We develop a case study for 23 counties and 1 city in Maryland to examine the usefulness and limitations of the indicators. Our case study demonstrates that the indicators provide an informative view into patterns of local economic activity and use of an area’s environmental goods and services. In contrast to patterns for total environmental burdens (e.g., total SO₂ emissions) that are typically reported, the rates of environmental burden per job are not simply correlated with high or low economic output. Thus, the indicators represent distinct patterns of environmental burdens per job that reflect reliance on environmental services. The indicators have some limitations when used at this fine scale because they can misrepresent conditions in counties in which economic sectors are dominated by one or a few businesses. For this reason, the indicators are best used as a regional screening tool.     

Hazardous waste indicators for national decision makers

Indicators and indices are important tools that assist decision makers to formulate and implement plans for management at local, national and international levels. Four indicators for hazardous waste management are described that have recently been adopted within the United Nations framework of Indicators of Sustainable Development. Although these four indicators will be useful tools, the need for a broader range of policy-relevant qualitative and quantitative indicators, proxy indicators and indices is outlined. The argument is advanced that in order for all nations to better manage the range of hazardous waste issues, including waste generation, export/import and disposal, a set of innovative indicators and indices is required. Useful indicators and indices are described that could be used to link and quantify likely environmental, ecosystem and health impacts and risks especially from hazardous waste disposal. Indicators are also suggested that could be used to illustrate the shift in industrial strategy away from end-of-pipe processes towards waste recycling, cleaner production and integrated life-cycle analysis. It was concluded that until the lack of reliable and harmonized data on hazardous waste is addressed, indicator development and use by national and international decision makers cannot readily be implemented.     

Useful indicators of urban sustainability: Some methodological issues

This paper considers methodological questions concerning indicators of sustainability, which have arisen in the course of an EPSRC-supported project investigating a systems approach to assessing the sustainability of cities. The project aimed: (a) to develop a methodology, the Reference Sustainability System (RSS), for representing the energy, resource and material flows, on which the environmental sustainability of cities depends; (b) to show how this methodology could contribute to a more systematic assessment of the potential of technological and resource management strategies to enhance urban sustainability. Systems models of the material or resource flows caused by the household demand for paper, energy, water and bottled water have been constructed. The project has highlighted the complexity of assessing the contributions of specific technologies and strategies to enhanced sustainability. Particular issues raised include the relative merits and problems of using externality valuation methods compared to physical indicators, the difficulties of aggregating environmental impacts, the question of where system boundaries should be drawn in a life cycle analysis, and the need to consider both distant and local impacts which arise from the end-use demands of urban populations. The paper explores these issues, through the use of modelling results from the case studies. Particular emphasis is placed on the communication of research results to policy makers, interested organisations and the public, drawing on recent experience with the dissemination of results from the project's first case study relating to waste-paper management options.     

Using local knowledge to model asymmetric preference formation in willingness to pay for environmental services

This paper describes an approach to account for asymmetric preference formation in discrete choice models used for environmental valuation. The paper draws on data from a case study on preferences for environmental change resulting from a hypothetical rural development and conservation programme in Indonesia. Local knowledge on the current state of the environment was used to define an individual-specific status quo that consistently frames changes in a range of environmental services as gains or losses matching the perceptions of the local population living in the vicinity of a National Park. I estimated choice models that included separate parameters for increases and decreases in attribute levels for the environmental services and derived the indicators of local willingness to pay (WTP) corresponding to the bidirectional changes relative to the individual-specific status quo option. I found clear evidence of an asymmetric response to increase and decrease in attribute levels relative to the status quo. Ignoring asymmetric preference formation can therefore result in biased estimates of WTP indicators and welfare measures of change in cases where the outcomes of environmental programmes can plausibly result in both an increase and a decrease relative to a reference option. Compared to a symmetrical modelling approach, the combination of simultaneously accounting for asymmetric preference formation and preference heterogeneity in the choice model yielded additional insights that may be used to inform the development of local strategies towards biodiversity conservation.