Realizing stable operation of anaerobic ammonia oxidation at low temperatures treating low strength synthetic wastewater

The low activity of Anammox bacteria at low temperatures and competition from nitrite oxidation bacteria(NOB) when treating low strength wastewater have been major bottlenecks in implementing Anammox in mainstream wastewater treatment. By intermittent high strength feeding(IHSF) and stepwise temperature reduction, stable operation of a granular Anammox reactor was realized at low temperatures(down to 15°C) for 28 days when treating low strength synthetic wastewater. The nitrogen loading rate reached 1.23–1.34 kgN/m~3/day,and the total nitrogen removal rate reached 0.71–0.98 kgN/m~3/day. The IHSF enriched the Anammox sludge in high strength cycles and compensated for sludge loss in low strength cycles, and the high concentration of ammonium in high strength cycles inhibited NOB. The 16 SrRNA gene sequencing results revealed that Candidatus Kuenenia was predominant in the reactor at low temperatures.     

Achieving nitritation at low temperatures using free ammonia inhibition on Nitrobacter and real-time control in an SBR treating landfill leachate

Free ammonia(FA) inhibition on nitrite-oxidized bacteria(NOB) and real-time control are used to achieve nitrogen removal from landfill leachate via nitrite pathway at low temperatures in sequencing batch reactor. The inhibition of FA on NOB activity during the aerobic period was prolonged using real-time control. The degree of nitrite accumulation was monitored along with variations of the ammonia-oxidizing bacteria and NOB population using fluorescence in situ hybridization techniques. It is demonstrated that the end-point of ammonia oxidization is detected from the on-line measured dissolved oxygen,oxidization–reduction potential, and p H signals, which could avoid the loss the FA inhibition on NOB caused by excess aeration. At low temperature(13.0–17.6°C), the level of nitrite pathway rapidly increased from 19.8% to 90%, suggesting that nitritation was successfully started up at low temperature by applying syntrophic association of the FA inhibition and real-time control, and then this high level of nitrite pathway was stably maintained for as long as 233 days. Mechanism analysis shows that the establishment of nitritation was primarily the result of predominant ammonia-oxidizing bacteria developed in the nitrifying bacteria population compared to NOB. This was mainly due to a gradual reduction of nitrite amount that is available to provide energy for the growth of NOB,eventually leading to the elimination of NOB from the bacterial clusters in sequencing batch reactor sludge system.     

Differences in nitrite-oxidizing communities and kinetics in a brackish environment after enrichment at low and high nitrite concentrations

Nitrite accumulation in shrimp ponds can pose serious adverse effects to shrimp production and the environment.This study aims to develop an effective process for the enrichment of ready-to-use nitrite-oxidizing bacteria(NOB)inocula that would be appropriate for nitrite removal in brackish shrimp ponds.To achieve this objective,the effects of nitrite concentrations on NOB communities and nitrite oxidation kinetics in a brackish environment were investigated.Moving-bed biofilm sequencing batch reactors and continuous moving-bed biofilm reactors were used for the enrichment of NOB at various nitrite concentrations,using sediment from brackish shrimp ponds as seed inoculum.The results from NOB population analysis with quantitative polymerase chain reaction(q PCR)show that only Nitrospira were detected in the sediment from the shrimp ponds.After the enrichment,both Nitrospira and Nitrobacter coexisted in the reactors controlling effluent nitrite at 0.1 and 0.5 mg-NO_2~--N/L.On the other hand,in the reactors controlling effluent nitrite at 3,20,and 100 mg-NO_2~--N/L,Nitrobacter outcompeted Nitrospira in many orders of magnitude.The half saturation coefficients(Ks)for nitrite oxidation of the enrichments at low nitrite concentrations(0.1 and 0.5 mg-NO_2~--N/L)were in the range of 0.71–0.98 mg-NO_2~--N/L.In contrast,the Ksvalues of NOB enriched at high nitrite concentrations(3,20,and 100 mg-NO_2~--N/L)were much higher(8.36–12.20 mg-NO_2~--N/L).The results suggest that the selection of nitrite concentrations for the enrichment of NOB inocula can significantly influence NOB populations and kinetics,which could affect the effectiveness of their applications in brackish shrimp ponds.     

Start-up of the anammox process from the conventional activated sludge in a hybrid bioreactor

The anaerobic ammonium oxidation (anammox) process was successfully started up from conventional activated sludge using a hybrid bioreactor within 2 months. The average removal efficiencies of ammonia and nitrite were both over 80%, and the maximum total nitrogen removal rate of 1.85 kg N/(m³.day) was obtained on day 362 with the initial sludge concentration of 0.7 g mixed liquor suspended solids (MLSS)/L. Scanning electron microscope (SEM) observation of the granular sludge in the hybrid reactor clearly showed a high degree of compactness and cell sphericity, and the cell size was quite uniform. Transmission electron microscope photos showed that cells were round or oval, the cellular diameter was 0.6--1.0 μupm, and the percentage of the anammoxosome compartment was 51%--85% of the whole cell volume. Fluorescence in situ hybridization analysis (FISH) indicated that anammox bacteria became the dominant population in the community (accounting for more than 51% of total bacteria on day 250). Seven planctomycete 16S rRNA gene sequences were present in the 16S rRNA gene clone library generated from the biomass and affiliated to Candidatus Kuenenia stuttgartiensis and Candidatus Brocadia sp., a new anammox species. In addition, the average effluent suspended solid (MLSS) concentrations of outlets I (above the non-woven carrier) and II (below the non-woven carrier) were 0.0009 and 0.0035 g/L, respectively. This showed that the non-woven carrier could catch the biomass effectively, which increased biomass and improved the nitrogen removal rate in the reactor.     

Effects of ferrous and manganese ions on anammox process in sequencing batch biofilm reactors

Ferrous and manganese ions, as essential elements, significantly affect the synthesis of Haem-C, which participates in the energy metabolism and proliferation of anammox bacteria. In this study, two identical sequencing batch biofilm reactors were used to investigate the effects of ferrous and manganese ions on nitrogen removal efficiency and the potential of metal ions serving as electron donor/acceptors in the anammox process. Fluorescence in situ hybridization analysis was applied to investigate the microbial growth. Results showed that the nitrogen removal increased at high concentrations of Fe2＋ and Mn2＋ and the maximum removal efficiency was nearly 95% at Fe2＋ 0.08 mmol/L and Mn2＋ 0.05 mmol/L, which is nearly 15% and 8% higher than at the lowest Fe2＋ and Mn2＋ concentrations （0.04 and 0.0125 mmol/L）. The stabilities of the anammox reactor and the anammox bacterial growth were also enhanced with the elevated Fe2＋ and Mn2＋ concentrations. The Fe2＋ and Mn2＋were consumed by anammox bacteria along with the removal of ammonia and nitrite. Stoichiometry analysis showed Fe2＋ could serve as an electron donor for NO3-N in the anammox process. Nitrate could be reduced with Fe2＋ serving as the electron donor in the anammox system, which causes the value of NO~-N/NH4-N to decrease with the increasing of N-removal efficiency.     

Electrocoagulation coupled with electrooxidation for the simultaneous treatment of multiple pollutants in contaminated sediments

In situ and simultaneous remediation of a variety of pollutants in sediments remains a challenge. In this study, we report that the combination of electrocoagulation (EC) and electrooxidation (EO) is efficient in the immobilization of phosphorus and heavy metals and in the oxidation of ammonium and toxic organic matter. The integrated mixed metal oxide (MMO)/Fe anode system allowed the facile removal of ammonium and phosphorus in the overlying water (99% of 10 mg/L NH₄⁺-N and 95% of 10 mg/L P disappeared in 15 and 30 min, respectively). Compared with the controls of the single Fe anode and single MMO anode systems, the dual MMO/Fe anode system significantly improved the removal of phenanthrene and promoted the transition of Pb and Cu from the mobile species to the immobile species. The concentrations of Pb and Cu in the toxicity characteristic leaching procedure extracts were reduced by 99% and 97% after an 8 hr operation. Further tests with four real polluted samples indicated that substantial proportions of acid-soluble fraction Pb and Cu were reduced (30%–31% for Pb and 16%–23% for Cu), and the amounts of total organic carbon and NH₄⁺-N decreased by 56%–71% and 32%–63%, respectively. It was proposed that the in situ electrogenerated Fe(II) at the Fe anode and the active oxygen/chlorine species at the MMO anode are conducive to outstanding performance in the co-treatment of multiple pollutants. The results suggest that the EC/EO method is a powerful technology for the in situ remediation of sediments contaminated with different pollutants.     

Conversion of nitrogen and carbon in enriched paddy soil by denitrification coupled with anammox in a bioelectrochemical system

The aim of this study is to investigate conversion of nitrogen and COD in enriched paddy soil by nitrification coupled with anammox process in a dual chamber bioelectrochemical system. The paddy soil was enriched for denitrification coupled with anammox by microbial consortia and was acclimatized in the cathodic chamber of microbial fuel cells(MFCs). The bioelectrochemical systems were treated with different ammonium concentrations in the cathodic chamber: the MFC with low concentration ammonium...     

Ammonium removal pathways and microbial community in GAC-sand dual media filter in drinking water treatment

A GAC-sand dual media filter (GSF) was devised as an alternative solution for drinking water treatment plant to tackle the raw water polluted by ammonium in place of expensive ozone-GAC processes or bio-pretreatments. The ammonium removal pathways and microbial community in the GSFs were investigated. The concentrations of ammonium, nitrite and nitrate nitrogen were monitored along the filter. Total inorganic nitrogen (TIN) loss occurred during the filtration. For 1 mg ammonium removal, the TIN loss was as high as 0.35 mg, DO consumption was 3.06 mg, and alkalinity consumption was 5.55 mg. It was assumed that both nitrification and denitrification processes occur in the filters to fit the TIN loss and low DO consumption. During the filtration, nitritation, nitrification and nitritation-anaerobic ammonium oxidation processes probably occur, while traditional nitrification and denitrification and simultaneous nitrification and denitrification processes may occur. In the GSFs, Nitrosomonas and Nitrospira are likely to be involved in nitrification processes, while Novosphingobium, Comamonadaceae and Oxalobacteraceae may be involved in denitrification processes.     

Macroscale and microscale analysis of Anammox in anaerobic rotating biological contactor

Inoculated with conventional anaerobic activated sludge, the Anammox process was successfully developed in an anaerobic rotating biological contactor (AnRBC) fed with a low ratio of C/N synthetic wastewater. Operated in a single point feed mode, the AnRBC removed 92.1% (n = 126) of the influent N at the highest surface load of 12 g/(m².day). The biomass increased by 25% and 17.1 g/(m².day) of maximum N removal surface load was achieved by elevating flow rate with another feed point. Fluorescence in situ hybridization and polymerase chain reaction analysis indicated that the Anammox genus Candidatus Kuenenia stuttgartiensis dominated the community. Both Anammox and denitrifying activity were detected in biofilm by the application of microelectrodes. In the outer layer of the biofilm (0-2500 μupm), nitrite and ammonium consumed simultaneously in a ratio of 1.12/1, revealing the occurrence of Anammox. In the inner layer (> 2500 μupm), a decrease of nitrate was caused by denitrification in the absence of nitrite and ammonium.     

Specific biotests to assess eco-toxicity of biodegradable polymer materials in soil

Eco-toxicity investigation of polymer materials was considered extremely necessary for their potential menace, which was widely use as mulching materials in agricultural. In this study, polyethylene (PE), polystyrene (PS) and synthetic biomaterials-Ecoflex and cellulose were applying into soil cultivated with two potential indicator plants species: oat (Avena sativa) and red radish (Raphanus sativum). Variety of chemical, biochemical parameters and enzyme activity in soil were proved as effective approach to evaluate polymers phytotoxicity in plant-soil mesocosm. The F-value of biomass, pH, heavy metal and electoral conductivity of Raphanus behaved significant different from T0. Significant analysis results indicated biodegradation was fast in PE than PS, besides, heavy metals were dramatically decrease in the end implied the plant absorption may help decrease heavy metal toxicity. The increase value at T2 of Dehydrogenase activity (0.84 higher than average value for Avena & 0.91 higher for Raphanus), Metabolic Index (3.12 higher than average value for Avena & 3.81 higher for Raphanus) means during soil enzyme activity was promoted by biodegradation for its heterotrophic organisms’ energy transportation was stimulated. Statistics analysis was carried on Biplot PC1 (24.2% of the total variance), PC2 (23.2% of the total variance), versus PC3 (22.8% of the total variance), which indicated phosphatase activity and metabolic index was significant correlated, and high correlation of ammonium and protease activity. Furthermore, the effects were more evident in Raphanus treatments than in Avena, suggesting the higher sensitivity of Raphanus to polymers treatment, which indicate biodegradation of polymers in Raphanus treatment has produced intermediate phytotoxic compounds.     

吉阳核电厂址气象铁塔塔层风频规律及风速分布拟合研究

通过安徽吉阳核电厂址气象塔观测系统获取观测数据,研究了该地区的风频规律性,并按南沿江流、北沿江流对塔层风速分布进行幂函数近似拟合,估算了地表粗糙度。结果表明：本区主导风向多集中在偏东北风上,而且频率很高,次主导风向则略有差异;塔层风廓线分布基本符合幂函数关系,由廓线求出的n指数推荐值为：A类0.165,B类0.167,C类0.192,D类0.313,E类0.406,F类0.463;南沿江流方向的地表粗糙度为1.547 063 m,北沿江流方向的地表粗糙度为1.738 45 m。     

区域尺度绿洲稳定性评价

论文在区域尺度上,探讨了绿洲稳定性的内涵,并以新疆三工河流域绿洲为例,从绿洲所处的地理位置、绿洲与外围荒漠和山地系统之间的相互作用等方面评价了绿洲的区域稳定性。结果表明:①冲洪积扇型绿洲稳定性最高,其次是位于地下水溢出带下方的冲积平原型绿洲,稳定性最差的是湖滨三角洲或散流干三角洲上发育的绿洲;②绿洲的冷岛效应和植被指数可较好地表征绿洲与外围荒漠和山地系统之间的相互作用和评价绿洲的区域稳定性的时间变化。绿洲规模的扩大及绿洲水分和植被的增加将加强绿洲的冷岛效应,提高绿洲的稳定性;归一化差异植被指数增加,表明绿洲内植被覆盖密度增大和植物生物量提高,绿洲的稳定性增强。     

模具在工件反挤压过程中的变形模拟研究

模具在金属塑性成形过程中起着十分重要的作用。就一般而言,模具在金属成形过程中的变形被忽略,将之视为刚性体。然而在金属精密成形中,模具的变形对成形件的尺寸精度将产生较大的影响。利用SuperForm软件针对模具在工件挤压过程中的变形进行了有限元数值模拟,对这一问题作了初步分析与探讨,为工厂实际生产的工艺制定、模具设计提供理论参考与依据。     

包气带油污土层生物修复现场控制性因素的评价

包气带油污土层的生物修复涉及到石油降解微生物、石油污染物的可生物降解性和土壤环境三个方面.本文通过最或然计数法(MPN)、原油族组分柱层析分析方法和色质联机分析等实验手段,研究了淄河滩包气带油污土层的水力学特性、氮磷营养元素、微生物和石油污染物.结果表明,长期受石油污染的土层含有丰富的微生物,其中大部分具有降解石油烃的能力,且土层的渗透性极强,有利于开展油污土层的生物修复.同时,长期的挥发、淋失和转化造成土层中石油污染物主要由高分子、高沸点烃类组成,且油污土层的速效氮、速效磷含量太低,直接增加了生物修复的难度,成为不利于生物修复的影响因素.     

论西部大开发中高等级公路建设与环境的协调发展问题——以西(宁)湟(源)一级公路为例

本文从目前我国西部大开发中所面临的各种约束条件出发，以青海省西宁市至湟源县一级公路工程为例，简要阐述了西部大开发中高等级公路在路线设计，施工过程中保护好沿线生态环境的重要性和紧迫性，初步讨论了在西部大开发中如何协调高等级公路建设与环境之间的关系。     

对原子结构教学中两个问题的讨论

中学原子结构的课堂教学中,容易产生一些缺乏严谨性的情况。针对能级交错与分裂、洪特规则等内容教学过程中出现的例子进行探讨。     

电力行业水-能耦合关系研究综述

电力行业消耗了全球约8%的水资源,电力生产与输配过程中消耗的能源与水资源之间的相关关系被定义为电力行业水-能耦合关系.本文从电力行业水耗和节水潜力研究、电力生产与水资源空间分布匹配研究、电力行业水-能耦合关系与其他环境问题的关系研究三个角度对国际上相关文献的研究内容、研究方法和主要结论进行梳理.研究结果表明：冷却技术选择对电力行业的水-能耦合关系影响较大,电力生产的需水量与各地水资源禀赋在空间上不匹配,电力行业水-能耦合系统管理体系尚未建立且面临迫切的实际需求.     

黄河断流对三角洲附近海域生态环境影响的研究

本文根据多年调查监测数据研究成果，以及经济和社会统计资料，论述了黄河断流的历史与现状，定性定量地评价了黄河断流对三角洲附近海域生态环境的影响，并提出了缓解和预警对策。     

程海流域生态系统服务功能价值评估

以程海流域为研究对象,依据已有研究经验利用市场价值法、替代花费法、碳税法和造林成本法、成果参照法对程海流域生态系统服务功能价值进行评估。结果表明,程海流域总的生态系统服务功能价值为39.26亿元／a,其中,涵养水源价值最高,占总服务价值的32.0％,第二位是净化水体价值（占28％）,第三位是调节气候价值（占16％）,第四位是社会文化功能价值（占13％）,其次分别是：生物资源价值、科教旅游价值、生物栖息地价值和提供水资源价值。