Assessment of Temporal and Spatial Variation of Nitrate Removal in Riparian Zones

The aim of this study was to monitor long-term temporal and spatial groundwater NO₃^- removal efficiencies in different riparian zones via a limited number of sampling wells. Groundwater NO₃^- concentrations were measured fortnightly or monthly over a period of two years using transects of ground water sampling wells. Depending on the level of the NO₃^- load (up to 120mgNL^-1 at the input side of the riparian zone a distance of 10 to 30m was needed to remove NO₃^- from the groundwater below 11.3mgNL^-1. Considering all seasons, the mixed vegetation and grass riparian site succeeded to remove groundwater NO₃^- efficiently (92—100% within a distance of 30m. The forested riparian zone removed 72—90% of the total NO₃^- input within a distance of 30m. Evidence emerged that NO₃^- could also be removed actively at depths up to 2m, due to the presence of organically enriched layers of alluvial deposits or roots. Our four dimensional approach (three dimensional space and time), in combination with a limited number of sampling wells, was shown to be a useful monitoring tool to assess the variability of NO₃^- removal in riparian zones.     

Comparison of Numerical and Experimental Results for the Evaluation of the Depollution Effectiveness of Photocatalytic Coverings in Street Canyons

Towards the aim of improving the air quality in the urban environment via the application of innovative TiO₂ based photocatalytic coverings, a field campaign took place within the frame of the EU PICADA project () to asses the expected depollution efficiency of such materials under realistic conditions. Furthermore, extensive numerical modeling was performed via the application of the RANS CFD code for microscale applications MIMO, in an effort to asses the sensitivity of the developing flow field and the corresponding dispersion mechanism and hence of the depollution efficiency of the PICADA products on a wide range of factors, with most notably the length of the street canyon, the thermal exchange between the heated street canyon walls and the air and the approaching wind direction. For the needs of the PICADA project a new, simple module had to be implemented into MIMO to be able to model the removal of NO_x from a street canyon whose walls have been treated with a photocatalytic product. The model simulations results presented in this paper, show that MIMO is indeed capable of predicting the effectiveness of the photocatalytic products in question. At the same time, they reveal a strong dependence of the developing flow and concentration fields inside the field site street canyon configuration on most of the aforementioned factors with most notably the direction of the approaching wind.

Biomonitoring of Environmental Pollution Using Dielectric Properties of Tree Leaves

In the present work, dielectric measurements were performed in plane-tree leaves collected from a polluted urban site and a natural unpolluted one, in order to investigate the sensitivity of dielectric relaxation spectroscopy to the detection of heavy metals pollution. Although heavy metal concentrations at the urban site are not found considerable higher than those at the natural site, the two samples exhibit different features in the recorded dielectric spectra. Evaluation of experimental data suggests that the dielectric modulus (M*(ω)) representation is the most suitable for accenting the different dielectric relaxation processes of each sample. The imaginary part of dielectric modulus M″(ω) was fitted using a three-term Havriliak–Negami relaxation function, with fitting parameters, which depend on the concentrations of heavy metals. The lower frequency relaxation process is attributed to the ionic conductivity of the samples, while the two others are due to different charge transport mechanisms of α-response. The investigation of plane-tree leaves in terms of their dielectric properties can be considered as a promising biomonitoring for environmental pollution.     

Reliability of differing densities of sample grids used for the monitoring of forest condition in Europe

Concern about the possible deterioration of forest health led to the establishment in the 1980s of inventories of forest condition throughout Europe. International standardisation of the programmes was sought and a number of recommendations were made concerning sampling and assessment procedures. One of the most important rulings was that the assessment should be made on a systematic grid, the minimum density of which was 16×16 km. However, many countries adopted denser sampling grids, with 4×4 km being used in several countries and 1×1 km being used in the Netherlands. With five or more years of monitoring completed, there is a growing belief that a rapid and irreversible decline in forest health is not occurring. Consequently, some countries/regions are seeking to reduce their annual investment in forest health monitoring.The precision of national/regional estimates of forest health can be directly related to the sample size. As the sample size decreases, so also does the precision of the estimates. This is illustrated using data collected in Switzerland in 1992 and using grid densities of 4×4 km, 8×8 km, 12×12 km and 16×16 km. The value of the data is dependent on the sample size and the degree to which it is broken down (by region or species). The loss of precision associated with most subdivisions at the 8×8 km grid level remains acceptable, but a sharp deterioration in the precision occurs at the 12×12 km and 16×16 km grid levels. This has considerable implications for the interpretation of the inventories from those countries using a 16×16 km grid. In Switzerland, a reduction from the current 4×4 km grid to an 8×8 km grid (i.e. 75% reduction in sample size) would have relatively little impact on the overall results from the annual inventories of forest health.     

Determination of hydrazine hydrate based on electrochemiluminescence of Ru(bpy) 3 2+

Considering of the basic properties and also the two nitrogen atoms in the structure, hydrazine hydrate was employed to be an amine additive candidate, to build a Ru(bpy) ₃ ²⁺ /hydrazine electrochemiluminescence (ECL) system, and ECL of Ru(bpy) ₃ ²⁺ has been employed for the determination of hydrazine hydrate in the paper. The result demonstrated that the logarithmic ECL increasing (ΔECL?=?ECL_{after addition of hydrazine}???ECL_{before addition of hydrazine}) versus the logarithmic concentration of hydrazine hydrate is linear over a concentration range of 1.0?×?10^?9 to 1.0?×?10^?5?mol/L, on both glassy carbon and Pt electrodes in a pH 9 phosphate buffer. The hydrazine hydrate detection limit was down to 1.0?×?10^?9?mol/L, comparatively lower than other detection methods. To check its applicability, the proposed method was applied to the determination of hydrazine hydrate added into a tap water sample with good reproducibility and stability. All these provide a possibility to develop a novel ECL detection method for hydrazine in water.     

Anthropogenic emissions of methane and nitrous oxide in the Federal Republic of Germany

The anthropogenic emission sources of methane (CH₄) and nitrous oxide (N₂O) in the Federal Republic of Germany were investigated. The object of the recently completed first phase of this research project was to summarize the present knowledge about the emission sources, make a first rough estimate of the emissions, identify the need for further research in the field, and - as far as possible - discuss the existing possibilities to reduce emissions. The main CH₄ emission sources identified are the landfills, stock farming and pit mining, the main N₂O sources are agriculture (including a minor contribution from animal wastes) and the production of adipic acid, the latter possibly being reducible by means of a new catalytic process. The total anthropogenic emissions of CH₄ from Germany are estimated at 5.4 – 7.7 million tonnes per year, contributing a share of roughly 2 % to the world-wide anthropogenic emissions (350 million t/a). Those of N₂O are estimated at 200 000 – 280 000 tonnes per year (world-wide 1.4 – 6.5 million t/a).     

Is monitoring of respiratory properties of the haemoglobin of the Lugworm Arenicola marina meaningfull?

Haemoglobin in Arenicola has a high oxygen affinity, with a half saturation oxygen pressure of about 180 Pa at pH 7.4 and 15°C. The oxygen affinity decreases with increasing copper concentration in the blood to about 300 Pa at pH 7.4, 15°C. at a copper concentration of 35 g ml^-1. Copper exerts only a slight influence on the subunit cooperativity in oxygen binding. The oxygen affinity, subunit cooperativity and the Bohr effect are pH dependent. Copper affects the functioning of the blood by inhibiting oxygen binding to the haemoglobin in the respiratory area and oxygen delivery in the tissues.     

Evaluation of applicability of the Sartorius Airport MD8 sampler for detection of Bacillus endospores in indoor air

This study was designed to evaluate the measuring range and lowest limit of detection of Bacillus endospores in the ambient room air when the Sartorius MD8 sampler, and two different culture methods for bacterial enumeration were used. Different concentrations of bioaerosol were generated inside the test chamber filled with either the high-efficiency particulate air (HEPA)-filtered air or with the ambient room air. The detection of endospores in the HEPA-filtered air was achievable: (1) when they were aerosolized at a concentration above 7.56?×?10³ CFU/m³ and analyzed with spread plate method, and (2) when they were aerosolized at a concentration above 4.00?×?10² CFU/m³ and analyzed with pour plate method. The detection of endospores in the ambient room air was possible: (1) when they were aerosolized at a concentration above 9.1?×?10³ CFU/m³ and analyzed with spread plate method, and (2) when they were aerosolized at a concentration above 5.6?×?10² CFU/m³ and analyzed with pour plate method. The microorganisms present in the ambient room air interfere with precise quantification of Bacillus endospores when their concentration is relatively low. The results of this study may be helpful in critical assessment of the results obtained from monitoring the air for bacterial endospores.     

Problems of correlation of global and local monitoring of air pollution

1. The Air Polluttion Monitoring System has got a significant development of late, which is in direct relation with a considerable extention and improvement of the observation network in cities and industrial areas, with creation of a new network for assessing regional and global background of the atmosphere pollution, as well as with the wide involvement of meteorologists to monitoring organization.
2. While developing a new global monitoring system, it is necessary to take into account its relationship with the local monitoring within the region of air pollution sources, i.e. at the \lsimpact\rs level. The need in such an account is dictated first of all by the physics of pollutant spreading that states: changes in air pollution over large territories must be in a certain agreement with greater changes in the vicinity of emission sources. Methods applied in the global and local monitoring have also a number of common peculiarities. White organizing regional network for observations of the background pollution of the atmosphere twin stations (one of the pair of stations located outside the city boundaries in a small community, and the other, in the nearest city with the population of 200–400 thousand inhabitants) were established in the U.S.S.R. and in a number of socialist countries in Europe.
3. Implementation of the twin-station principles in the U.S.S.R. has contributed to data interpretation and representativity assessment as well as to correction of the station location. Observation results from the Soviet background stations and those abroad have been compared by now according to a number of indices.
4. The correlation of monitoring systems of various scales tells positively both on mutual improvement and completion of observational methods. The methods of obtaining integral characteristics of air pollution were used for the global monitoring, in particular spectral actinometric observations and chemical analysis of the precipitation composition. Now they find still wider employment. Thus methods of spectral actinometric measurements and data processing were used to estimate the degree of aerosol pollution of a number of industrial centres. The theory of solar radiation spreading and aerosol contents determination in urban atmosphere has also been developed. It is a generalization of an earlier developed theory, used to estimate global atmosphere pollution basing on actinometric data. The organization of precipitation collection and analysis on a network of stations around Leningrad and in Donbass area enables us to compare the admixture content in precipitations falling in industrial and agricultural areas.
5. A considerable increase of possibilities to measure microconcentrations of sulphur dioxide, nitrogen oxides and of a number of other pollutants is connected with the use of solid solvents for sampling. Their use will allow to avoid establishment of special laboratories at background stations and only send samples by post for their analysis in centralized laboratories.

They will also allow to considerably increase precision and accuracy of measurements. The international comparisons of methods of air pollution measurements on the background level allow to judge about the effiency of these methods.     

Factors affecting metribuzin retention in Algerian soils and assessment of the risks of contamination

Metribuzin is a widely used herbicide around the world but it could lead to soil and water contamination. Metribuzin retention on a silty–clay agricultural soil of Algeria was studied in laboratory batch experiments to assess the contamination risk of the groundwater. Factors conditioning the fate of metribuzin were investigated: soil nature, metribuzin formulation, NPK fertilizer, and soil pH. Freundlich sorption isotherms gave the coefficients K _F between 1.2 and 4.9 and 1/n _a between 0.52 and 0.93. The adsorption is directly dependent on organic and clay soil contents. Formulated metribuzin (Metriphar) reduces the adsorption (K _F?=?1.25) compared to pure metribuzin (K _F?=?2.81). The addition of an NPK fertilizer decreases the soil pH (6.67 for the soil without fertilizer and 5.86 for 2 % of fertilizer) and increases metribuzin adsorption (K _F is 4.83 for 2 % of fertilizer). The pH effect on the adsorption is corroborated in experiments changing the soil pH between 5 (K _F is 4.17) and 8 (K _F is 1.57) under controlled conditions. Desorption isotherms show a hysteresis and only 30 to 40 % of the initially adsorbed metribuzin is released. The estimated GUS index is ≥2.8 for a DT50?≥?30 days. K _F values and the hysteresis show that metribuzin is little but strongly retained on the soil. Formulated metribuzin and addition of fertilizer affect the retention. However, the GUS index indicates a high mobility and a significant risk of leaching. The most appropriate risk management measure would be an important increase in organic matter content of the soil by addition of organic amendments.     

Study of Meteorological Aspects and Urban Concentration of SO2 in Atmospheric Environment of La Plata, Argentina

This article presents and discusses SO₂ (ppbv) concentration measurements combined with meteorological data (mainly wind speed and direction) for a five-year campaign (1996 to 2000), in a site near an oil refinery plant close to the city of La Plata and surroundings (aprox. 740.000 inh.), considered one of the six most affected cities by air pollution in the country. Since there is no monitoring network in the area, the obtained results should be considered as medium term accumulated data that enables to determine trends by analyzing together gas concentrations and meteorological parameters. Preliminary characterization of the behaviour of the predominant winds of the region in relation with potential atmospheric gas pollutants from seasonal wind roses is possible to carry out from the data. These results are complemented with monthly averaged SO₂ measurements. In particular, for year 2000, pollutant roses were determined which enable predictions about contamination emission sources. As a general result we can state that there is a clear increase in annual SO₂ concentration and that the selected site should be considered as a key site for future survey monitoring network deployment. Annual SO₂ average concentration and prevailing seasonal winds determined in this work, together with the potential health impact of SO₂ reveals the need for a comprehensive and systematic study involving particulate matter an other basic pollutant gases.     

The use of X-ray fluorescence to detect lead contamination of carpeted surfaces

The recognition of the hazards to young children of low-level lead intoxication and the widespread distribution of lead in the urban environment have resulted in massive federal, state, and local lead awareness and abatement programs. Two of the most significant exposure routes of lead to young children are the soils and dusts found within the child's home. Most state and federal lead abatement programs deal with lead-based paint contamination but often do not address the issue of soft-surface contamination, such as that of carpets, furniture, and draperies. Carpets can be a reservoir of contaminated soils and dusts; currently, there exists no standard method to test carpeted surfaces for lead contamination. This paper describes a study that uses X-ray fluorescence (XRF) to test carpeted surfaces for lead contamination. XRF technology is the standard technology used in lead-based paint testing and is known to be an accurate technique to test for lead in soils. This study uses a controlled laboratory atmosphere to evaluate this technology; the objectives are to determine: (1) a lower limit of detection for the instrument; and (2) whether soil loading levels can be differentiated by XRF using trace elements also present in the soil. Results indicate that XRF can easily differentiate soil loading levels (g soil/m² carpet). The lower limit of detection of soil lead concentration on the carpet is a function of both soil lead concentration and soil loading; therefore, lead loading (mg Pb/m²) is a better indicator of detection limit than soil lead concentration. Lead loading detection levels from 108–258 mg Pb/m² were obtained, as compared to a level of 10 000 mg/m² (1 mg/cm²) for lead on painted surfaces as required by theLead-Based Paint Poisoning Prevention Act. XRF technology has the potential to be a fast, inexpensive screening technique for the evaluation of lead contamination on carpeted surfaces.     

Suitability of selected bioindicators of atmospheric pollution in the industrialised region of Ostrava,Upper Silesia,Czech Republic

This study is a continuation of our preceding research identifying suitable environmental samples for the tracing of atmospheric pollution in industrial areas. Three additional types of environmental samples were used to characterise contamination sources in the industrial area of Ostrava city, Czech Republic. The region is known for its extensive metallurgical and mining activities. Fingerprinting of stable Pb isotopes was applied to distinguish individual sources of anthropogenic Pb. A wide range of ²⁰⁶Pb/²⁰⁷Pb ratios was observed in the investigated samples: ²⁰⁶Pb/²⁰⁷Pb = 1.168–1.198 in mosses; ²⁰⁶Pb/²⁰⁷Pb = 1.167–1.215 in soils and ²⁰⁶Pb/²⁰⁷Pb = 1.158–1.184 in tree cores. Black and brown coal combustion, as well as metallurgical activities, is the two main sources of pollution in the area. Fossil fuel burning in industry and households seems to be a stronger source of Pb emissions than from the metallurgical industry. Concentration analyses of tree rings showed that a significant increase in As concentrations occurred between 1999 and 2016 (from 0.38 mg kg^?1 to 13.8 mg kg^?1). This shift corresponds to the use of brown coal from Bílina, Czech Republic, with an increased As concentration. The burning of low-quality fuels in households remains a problem in the area, as small ground sources have a greater influence on the air quality than do industrial sources.     

Probabilistic Modelling of Cattle Farm Distribution in Australia

A probabilistic Bayesian method called weights of evidence (WofE) was used to develop a synthetic dataset of cattle farm locations at a national scale across Australia. The synthetic dataset was required for the modelling of livestock movements with a view to assessing biosecurity implications. The WofE method is based on the analysis of spatial relationships between evidential patterns with respect to an event, such as the actual location of a farm. The evidential patterns of cattle farms were derived from maps of land use, land tenure, drainage systems, roads, settlements and long-term averaged rainfall. These evidential patterns were used for delineating and ranking land areas suitable for cattle farming. For each evidential pattern statistics such as a positive weight, a negative weight and a contrast were calculated for estimating the degree of correlation between the evidential patterns and known farm locations. The integrated evidential patterns of known farms were then used for estimating posterior probabilities and splitting land into five different classes according to its suitability for farming.

New evidences in the complexity of contamination of the lagoon of Venice: polybrominated diphenyl ethers (PBDEs) pollution

This study presents the first evaluation of the current pollution by polybrominated diphenyl ethers (PBDEs) of surface sediments from the Lagoon of Venice. We focused the research on tri-to hepta-BDEs, the main components of penta- and octa-mixtures, which are considered to be the most toxic for the biocoenosis. The results pointed out a quite homogeneous contamination of this keystone European transitional environment, with ∑ ₁₃PBDEs values ra nging from 0.39 to 6.78 ng/g dry weight; these values reflect low to moderate pollution levels, which is in conformity to other coastal European ecosystems. The average PBDE profile of the lagoon sediments follows this decreasing trend of congeners: BDE-47>BDE-99> >BDE-190>BDE-28>BDE-153>BDE-154>BDE-138, BDE-183, and BDE-17, which is similar to the worldwide distribution pattern. BDE-47 and BDE-99 revealed a recent use of a penta-BDE mixture, while the presence of hepta-BDEs (BDE-183 and BDE-190) in all of the sites can indicate the actual use of a deca-BDE formulation, because these congeners are considered to be debrominated byproducts of BDE-209 degradation.     

Using of high-resolution topsoil magnetic screening for assessment of dust deposition: comparison of forest and arable soil datasets

Magnetic susceptibility (κ) is an easily detectable geophysical parameter that can be used as a proxy or semi-quantitative tracer of atmospheric industrial and urban dusts deposited in topsoil. An enhanced κ value of topsoil is in many cases also associated with high concentrations of soil pollutants (mostly heavy metals). High-resolution magnetic screening of topsoil in areas of high pollution influx is a useful tool for detection of pollution “hot spots”. General and regional screening maps with a grid density of 10 or 5 km have been performed on the basis of forest topsoil measurement only. The purpose of this study was to perform high-resolution magnetic screening with different grid densities in both forested and agricultural areas (arable land). Our large study area (ca. 200 km²) was located in a relatively more polluted region of the central part of Upper Silesia, and a second (small) one (ca. 100 m²) was located in the western part of Upper Silesia, with considerably lower influx of pollution. In the framework of this study, we applied a statistical comparison of data obtained in forested areas and on arable land. The arable soil showed statistically significantly lower κ values, the result of “physical dilution” of the arable layer caused by annual ploughing. Thus arable soils must be avoided during high-resolution field measurement. From semivariograms, it was clear that the spatial correlations in forest topsoil are much stronger than in arable soil, which suggests that a denser measurement grid is required in forested areas.     

A Sensitivity Analysis of an Integrated Modelling Approach to Assess the Risk of Wind-borne Spread of Foot-and-mouth Disease Virus from Infected Premises

The sensitivity of an integrated model to assess the potential for wind-borne spread of foot-and-mouth disease (FMD) to variations in key parameters controlling different physical and biological processes was evaluated. The estimated number of farms at risk is sensitive to the virus strain used and the accompanying effective contact rate. The C Noville strain increased the estimated number of exposed farms ranked as high and medium risk of being infected by a factor of 5, compared to the baseline, based on the O UKG 2001 strain. The inclusion of a model for biological ageing of the virus can also have a significant effect on the concentration patterns arising from transport and dispersion of the virus. Its inclusion has the practical advantage of markedly reducing the time required for the calculations. The estimated number of farms affected by exposure to high and medium virus concentrations is not grossly sensitive to attenuation caused by temperature or relative humidity effects. Changes in susceptibility to infection, as determined by the parameter θ in the exposure-risk model, does not change the configuration of the virus plumes, but it does change the distribution of farms at risk by risk category. These findings suggest that a good understanding of characteristics (excretion rates from infected animals, susceptibility of different species to infection, virus survival, etc.) of the virus strain involved in an FMD outbreak is necessary to provide a reliable assessment of the risk of wind-borne spread. In the event of an incursion of FMD, provision for laboratory studies on the virus will be an essential component of the disease response and should be factored into contingency plans.

Negative effect of litter of invasive weed Lantana camara on structure and composition of vegetation in the lower Siwalik Hills,northern India

Lantana camara, an aromatic shrub, native to tropical America, was introduced into India for ornamental hedging, but later escaped and became a serious invasive weed. This study assessed the quantitative and qualitative status of plant community richness and diversity in areas invaded by L. camara in the Siwalik Hills (Himachal Pradesh, India), and explored allelopathy as a possible mechanism of interference. We measured species diversity, richness and evenness of the vegetation in areas invaded and uninvaded by L. camara. Allelopathic effects of L. camara rhizosphere soil and litter were assessed against two native plants—Achyranthes aspera (a herb) and Albizia lebbeck (a tree). Density, biomass and indices of diversity, richness and evenness were reduced by L. camara, indicating a significant alteration in composition and structure of native communities. Seedling growth of the test species was reduced in L. camara rhizosphere- and litter-amended soil. The inhibitory effect was ameliorated by the addition of activated charcoal, indicating the presence of organic inhibitors (quantified as phenolics) in the soil. Lantana invasion greatly reduces the density and diversity of the vegetation in the invaded area, and chemical interference of its litter plays an important role in invasion.     

Assessment of the Health Impacts of Particulates from the Redevelopment of Kings Cross

The Kings Cross/St. Pancras area has been a rail transport hub from Central London to the Midlands and North Eastern England since the middle of the nineteenth century and dust from the Kings Cross railway lands was even described by Charles Dickens.¹ The Channel Tunnel high speed Rail Link (CTRL) is being constructed between 2001 and 2007 to connect continental Europe to Central London. The CTRL and associated development will help regenerate an area that is surrounded by deprived high density housing estates. London Borough of Camden has set up an extensive particulate monitoring programme to determine if there are any health impacts on local residents from emissions from the demolition and construction work. This article assesses the results from particulate measurements in 2003–2004 and compares this to baseline conditions before the redevelopment work began. The evidence suggests that although 2003 had higher than average pollution levels in the UK as a whole, even higher levels of particulates in the size range PM₁₀–PM_2.5 (defined as PM_coarse) were measured in Kings Cross. Due to the size of these particulates, they tend to be released from construction works rather than transport or secondary particulate sources. Concentrations in 2004 were lower than 2003, but this was primarily due to meteorological conditions. The paper also looks at the health of the local population and discusses whether these elevated levels are creating a problem and legally constitute a statutory nuisance. The Council continues to work with the contractors to try and ensure best practical means to minimise dust emissions and their effect on local residents. ¹Our Mutual Friend     

Dielectric properties of MSWI bottom ash for non-invasive monitoring of moisture

The dielectric procperties of MSWI bottom ash as a function of volumetric water content (VWC) are reported in this paper. The objective was to aid the development of microwave based non-invasive emission monitoring and control system for various bottom ash applications. The dielectric measurements were made, on a 1.5-year-old bottom ash, with an electrical network analyzer in microwave range (300 MHz–1.5 GHz). The VWC of the samples ranged between 0.05 and 0.40 m³?m^?3. The relationship between the dielectric permittivity and the VWC was modeled with an empirical model and a physically based Birchak model (BM). The results showed that a linear relationship existed between the permittivity and the VWC at higher water contents (>0.25 m³?m^?3). However, at lower water contents (<0.25 m³?m^?3), the relationship between the permittivity and the WVC was affected by the composition of the bottom ash. The permittivity measurement, with the current method, was not affected by high salt concentrations (10 and 20 dS/m). The empirical model, as compared to BM, provided the best fit between the actual and the predicted water content. The root mean square error (RMSE) values were 0.008–0.010 and 0.06–0.09 m³?m^?3 for the empirical and the Birchak model, respectively.