A Novel Solar Thermal Cycle with Chemical Looping Combustion

In this paper, we have proposed a thermal cycle with the integration of chemical-looping combustion and solar thermal energy with the temperature of about 500-600°C. Chemical-looping combustion may be carried out in two successive reactions between a reduction of hydrocarbon fuel with metal oxides and a reduced metal with oxygen in the air. This loop of chemical reactions is substituted for conventional combustion of fuel. Methane as a fuel and nickel oxides as an oxygen carrier were employed in this cycle. Collected high-temperature solar thermal energy is provided for the endothermic reduction reaction. The feature of the proposed cycle is investigated through Energy-Utilization Diagram methodology. As a result, at the turbine inlet temperature of 1200°C, the exergy efficiency of the proposed cycle would be expected to be about 4 percentage points higher than that of a conventional gas turbine combined cycle. Compared to the previous study of chemical-looping combustion energy systems, the proposed cycle with the integration of green energy and traditional hydrocarbon fuels will offer the possibility of both greenhouse gas mitigation, with green energy, and a new approach to the efficient use of solar energy.     

Analysis of a solar photovoltaic-assisted absorption refrigeration system for domestic air conditioning

Theoretical model of a solar photovoltaic integrated water-Lithium bromide absorption system is presented for domestic air conditioning. Surplus electrical energy from photovoltaic modules is used for charging the battery, which is utilized during the periods of zero or insufficient solar radiation. Minimum solar area required for each month is calculated and October is identified as the month requiring the highest area of photovoltaic arrays for a constant cooling load of 3.5 kW. The integrated system is found to be capable of sufficient amount of surplus electrical energy generation during both summer and winter months, with a daily excess of about 815 Ah of electrical energy on average over a complete calendar year. Designed system is found to be economically viable, having an energy payback period of 2.7 years.     

Exergy and economic analysis of organic Rankine cycle hybrid system utilizing biogas and solar energy in rural area of China

Due to the existing huge biogas resource in the rural area of China, biogas is widely used for production and living. Cogeneration system provides an opportunity to realize the balanced utilization of the renewable energy such as biogas and solar energy. This article presented a numerical investigation of a hybrid energy-driven organic Rankine cycle (ORC) cogeneration system, involving a solar ORC and a biogas boiler. The biogas boiler with a module of solar parabolic trough collectors (PTCs) is employed to provide heat source to the ORC via two distinct intermediate pressurized circuits. The cogeneration supplied the power to the air-condition in summer condition and hot water, which is heated in the condenser, in winter condition. The system performance under the subcritical pressures has been assessed according to the energy–exergy and economic analysis with the organic working fluid R123. The effects of various parameters such as the evaporation and condensation temperatures on system performance were investigated. The net power generation efficiency of the cogeneration system is 11.17%, which is 25.8% higher than that of the base system at an evaporation temperature 110°C. The exergy efficiency of ORC system increases from 35.2% to 38.2%. Moreover, an economic analysis of the system is carried out. The results demonstrate that the profits generated from the reduction of biogas fuel and electricity consumption can lead to a significant saving, resulting in an approximate annual saving from $1,700 to $3,000. Finally, a case study based on the consideration of typical rural residence was performed, which needs a payback period of 7.8 years under the best case.     

可再生能源技术在我国旅游循环经济发展中的应用

可再生资源代替常规能源使用，是旅游可持续发展的客观要求，是旅游循环经济应用的重要方面。太阳能、风能、水能、生物质能、地热能和海洋能利用技术可广泛应用于旅游循环经济系统中的旅游区（点）、旅行社、住宿、餐饮、交通、购物、娱乐等旅游企业。应采取观念更新、政府支持、技术支持等措施推进可再生资源技术在发展旅游循环经济中的研发、推广与运用。     

The joint use of LCA and emergy evaluation for the analysis of two Italian wine farms

The aim of this paper is to evaluate two agroindustrial productive processes in their entirety (one organic and one semi-industrial), focusing on the comparison of impacts derived from the inputs and outputs of the system (life cycle assessment, LCA), integrated with a physical evaluation of the resources and natural services, on a common basis (emergy). Methods based on the joint use of LCA and emergy evaluation are useful, as they measure the contribution of environmental services and products to the productive process thus focusing primarily on the environmental impact of emissions and non-renewable energy inputs. The complementarity of the methods used in this paper contributes important elements and information useful for the comprehension of the organization of agriculture within Siena's territory. The results show important elements and useful information: (1) for the comprehension of the two agroecosystems' organization; (2) for the use of the energy flows that determine their development. Moreover, the combined use of emergy and LCA gives a comparative thermodynamic performance evaluation between organic and semi-industrial farming.     

LCA-Based Economic Benefit Analysis for Building Integrated Photovoltaic (BIPV) Façades: A Case Study in Taiwan

Solar energy is one of the major sources of alternative and green energies that humanity need now and will continue to need in the future. There are now a large number of R&D activities on solar power generation facilities and equipment around the world. Located in a subtropical region, Taiwan is rich in solar energy resources; therefore, how to effectively use and store solar energy is a research topic of great interest to Taiwan. The main purpose of this study explores the economic benefits of building-integrated photovoltaics (BIPV) facilities and equipment by analyzing the net present values (NPV) and payback period of the BIPV façade of a shopping mall in Taiwan over its lifecycle. The NPV and payback period analysis results both indicate that the BIPV façade in the case study reaches its breakeven point within 10 years of payback period and 16 years of NPV during a life cycle of 20 years. By showing BIPV investments can bring an acceptable range of benefits profits, this study hopes to provide references for promoting the photovoltaic (PV) industry.     

Comparison of development scenarios of a black water source-separation sanitation system using life cycle assessment and environmental life cycle costing

The objective of the study is to compare different development scenarios of a black water source-separation sanitation system (BWS) that could be environmentally and economically more viable than a conventional system (CONV). Scenarios performance is evaluated using life cycle assessment and environmental life cycle costing. System boundaries include the processes related to the collection and treatment of wastewater and organic kitchen refuse collection and the recycling of by-product (digestate/sludge and biogas) produced in the treatment step. The BWS scenario that entails a vacuum toilet flow-volume reduction to 0.5 L/flush results in significantly higher performances than the ones of CONV for the climate change and resources indicators, while involving a significantly lower performance with regards to human health and a comparable cost. The BWS scenario based on digestate mass reduction with reverse osmosis and acidification prior to its transport to farmland achieves comparable performances to the ones of CONV for all indicators. The BWS scenario with digestate treatment by means of phosphorus precipitation (struvite) and nitritation–anammox reactors gives performances that are comparable to the ones of CONV for all indicators, with the exception of climate change, for which this scenario has a significantly lower performance if the electricity is produced by hydropower. When single-pathway scenarios are combined, the multi-pathway scenarios thus created can produce results that are significantly superior to the CONV result for the climate change, resources and human health indicators although the cost remains comparable.     

Environmental impact minimization of a total wastewater treatment network system from a life cycle perspective

Synthesis of distributed wastewater treatment plants (WTPs) has focused on cost reduction, but never on the reduction of environmental impacts. A mathematical optimization model was developed in this study to synthesize existing distributed and terminal WTPs into an environmentally friendly total wastewater treatment network system (TWTNS) from a life cycle perspective. Life cycle assessment (LCA) was performed to evaluate the environmental impacts of principal contributors in a TWTNS. The LCA results were integrated into the objective function of the model. The mass balances were formulated from the superstructure model, and the constraints were formulated to reflect real wastewater treatment situations in industrial plants. A case study validated the model and demonstrated the effect of the objective function on the configuration and environmental performance of a TWTNS. This model can be used to minimize environmental impacts of a TWTNS in retrofitting existing WTPs in line with cleaner production and sustainable development.     

Limitations of applying life cycle assessment to complex co-product systems: The case of an integrated precious metals smelter-refinery

Integrated smelter-refineries play an important role in the recovery of multiple metals from complex primary and secondary materials, and hence in closing metals cycles. Processes in these facilities are strongly interconnected, dynamic, and multifunctional, which challenges a typical representation in life cycle assessment (LCA). This is especially true when LCA is applied to calculate the environmental profile of single metals products.This study examines methodological requirements for assessing complex co-product systems using attributional LCA through a static, gate-to-gate inventory model that quantifies the environmental impacts of each of the metal products of an integrated precious metals smelter-refinery. The model is based on a large number of subprocesses and is formulated using detailed industry data, which allows quantification of the sensitivity of the results with respect to allocation rationales and the data collection period.The results within one impact category vary strongly among metals (up to four orders of magnitude for copper compared to rhodium). Moving from mass- to value-based allocation changes the result for a given metal by up to two orders of magnitude. If value-based allocation is used, the selected reference year for metals prices influences the results by up to a factor of two.Allocation rationales are critically analyzed, and it is shown that none reflect the business model or other system drivers. While the model is focused on quantifying environmental impacts of metal outputs, the actual process is economically driven to efficiently treat a continuously changing feed mix. The complexity of a smelter-refinery cannot be captured by static, attributional inventory models, which is why the choice of allocation rationale remains arbitrary. Instead, marginal, parameterized models are needed; however, such models are substantially more time and data intensive and require disclosure of more detailed, process specific data.     

Designing a supercritical steam cycle to integrate the energy requirements of CO2 amine scrubbing

Absorption by chemical solvents combined with CO₂ long-term storage appears to offer interesting and commercial applicable CO₂ capture technology. However one of the main disadvantages is related to the large quantities of heat required to regenerate the amine solvent that means an important power plant efficiency penalty. Different studies have analyzed alternatives to reduce the heat duty on the reboiler and the thermal integration requirements on existing power cycles. In these studies integration principles have been well set up, but there is a lack of information about how to achieve an integrated design and the thermal balances of the modified cycle flowsheet. This paper proposes and provides details about a set of modifications of a supercritical steam cycle to overcome the energy requirements through energetic integration with the aim of reducing the efficiency and power output penalty associated with CO₂ capture process. Modifications include a new designed low-pressure heater flowsheet to take advantage of the CO₂ compression cooling for postcombustion systems and integration of amine reboiler into a steam cycle. It has been carried out several simulations in order to obtain power plant performance depending on sorbent regeneration requirements.     

An economic and environmental assessment of carbon capture and storage (CCS) power plants: a case study for the City of Kiel

In the not too distant future several power plants throughout Europe will have to be replaced and the decision has to be made whether to build coal-fired power plants with carbon capture and storage (CCS). In a study for the city of Kiel in northern Germany only an 800 MW coal power plant reaches a required minimum for rentability. This study looks at an additional economic and environmental evaluation of a coal plant with CCS. We find that in two out of three carbon and energy price scenarios integrated gasification combined cycle (IGCC) plants with CCS have the greatest rentability. Pulverised coal (PC) plants with CCS can only compete with other options under very favourable assumptions. Life-cycle emissions from CCS are less than 70% of a coal plant – compared with at least more than 80% when only considering direct emissions from plants. However, life-cycle emissions are lower than in any other assessed option.     

A life cycle based multi-objective optimization model for the management of computer waste

The accelerating pace of waste generation from used electrical and electronic equipment is of growing global concern. Within this waste stream, computer hardware is quite significant in terms of both volume and risk to the environment because of the hazardous materials within it. The waste management hierarchy of prevention, reuse, recycle, treatment and disposal in landfill is accepted as a universal guideline for waste management. The contemporary concept of integrated solid waste management is very complex comprising of not only the environmental aspects or the technical aspects of the waste management hierarchy, but also incorporating economic, institutional, perceived risk and social issues in the context of complete life cycle of waste. Moreover, when to shift from one stage of hierarchy to another, is an involved decision warranting inclusion of several case specific issues. This paper presents a life cycle based multi-objective model that can help decision makers in integrated waste management. The proposed model has been applied to a case study of computer waste scenario in Delhi, India, which apart from having computer waste from its native population receives large quantities of imported second hand computers. The model has been used to evaluate management cost and reuse time span or life cycle of various streams of computer waste for different objectives of economy, perceived risk and environmental impact. The model results for different scenarios of waste generation have been analyzed to understand the tradeoffs between cost, perceived risk and environmental impact. The optimum life cycle of a computer desktop was observed to be shorter by 25% while optimizing cost than while optimizing impact to the environment or risk perceived by public. Proposed integrated approach can be useful for determining the optimum life cycle of computer waste, as well as optimum configuration of waste management facilities, for urban centers where computer waste related issues are of growing concern.     

Environmental and economic feasibility study of a total wastewater treatment network system

The synthesis of distributed wastewater treatment plants (WTPs) has been studied to reduce capital and operating costs associated with wastewater treatment. In this study, the environmental and economic feasibility of a total wastewater treatment network system (TWTNS) including distributed and terminal WTPs was estimated using life cycle assessment (LCA) and life cycle costing (LCC) methods. Wastewater sources and existing distributed and terminal WTPs in an iron and steel plant were networked. The TWTNS was generated from the optimal solution to a mathematical optimization model and compared to a conventional wastewater treatment system (CWTS). The environmental effect scores of the TWTNS were from 29.6% to 68.3% higher than those of the CWTS because of higher electricity consumption required to pump wastewater to the networked WTPs. However, the life cycle cost of the TWTNS was lower than that of the CWTS by 10.1% because of the decrease of the labor cost resulting from the closing of three distributed WTPs. Overall, the TWTNS was no more eco-efficient than the CWTS because the increase of environmental burdens outweighed the decrease of economic costs.     

Performance of a large-scale greenhouse solar dryer integrated with phase change material thermal storage system for drying of chili

ABSTRACT

Large-scale greenhouse solar dryers have been used for drying various products and this type of dryer is usually equipped with LPG burner as auxiliary heater, which creates more operating cost. To overcome this problem, phase change material (PCM) thermal storage was proposed to substitute for the LPG burner. In this work, the performance of a large-scale greenhouse solar dryer integrated with a PCM as a latent heat storage for drying of chili was investigated. Experimental studies were conducted to compare the performance of this dryer with that of another large-scale greenhouse solar dryer without the PCM thermal storage and open sun drying. Chili with an initial moisture content of 74.7% (w.b.) was dried to a final moisture content of 10.0% (w.b.) in 2.5 days, 3.5 days, and 11 days using the solar dryer integrated with the PCM thermal storage, the solar dryer without the PCM thermal storage and the open sun drying, respectively. The performance of the solar dryer integrated with the PCM thermal storage was also evaluated using exergy analysis. The exergy efficiency of the drying room of the solar dryer integrated with the PCM thermal storage and the solar dryer without the PCM thermal storage for drying of chili was found to be 13.1% and 11.4%, respectively and the thermal storage helps to dry chili during adverse weather conditions. The results of exergy analysis implied that the exergy losses from the dryer with the PCM should be reduced.     

Looking beyond incentives: the role of champions in the social acceptance of residential solar energy in regional Australian communities

Research into renewable energy adoption is increasingly identifying that the successful implementation of renewable energy projects is influenced by a combination of market, community and socio-political acceptance of renewable energy technology. This research uses case studies in two regional Australian communities to examine the social acceptance of residential solar energy, in particular under the influence of financial incentives and social interactions. Fifty-five semi-structured interviews with members of the local community, industry and government were undertaken between May and October 2015. Respondents were asked about their perceptions and knowledge of solar energy and incentives to support its adoption, and their interactions with actors important in the diffusion process. Responses indicated that financial incentives motivated solar adoption; however, social interactions in the communities also contributed to decision-making. In one case study, a local “solar champion” built a private solar farm to demonstrate the technical feasibility of solar, assisted community members with physically installing their own systems and helped community members to maximise the financial benefits of their solar installations. This solar champion contributed to this community having an earlier and more rapid rate of small-scale solar adoption compared with the second case study community. The second case study community included two individuals interested in promoting solar energy; however, they were less integrated with the community’s process of adopting solar, resulting in community members experiencing substandard installations and consequent distrust of the solar industry. This research concludes that local context influences solar adoption through complex interactions among market, community and socio-political acceptance.     

Processing of Straw/Corn Stover: Comparison of Life Cycle Emissions

The LCA emissions from four renewable energy routes that convert straw/corn stover into usable energy are examined. The conversion options studied are ethanol by fermentation, syndiesel by oxygen gasification followed by Fischer Tropsch synthesis, and electricity by either direct combustion or biomass integrated gasification and combined cycle (BIGCC). The greenhouse gas (GHG) emissions of these four options are evaluated, drawing on a range of studies, and compared to the conventional technology they would replace in a western North American setting. The net avoided GHG emissions for the four energy conversion processes calculated relative to a “business as usual” case are 830 g CO₂e/kWh for direct combustion, 839 g CO₂e/kWh for BIGCC, 2,060 g CO₂e/L for ethanol production, and 2,440 g CO₂e/L for FT synthesis of syndiesel. The largest impact on avoided emissions arises from substitution of biomass for fossil fuel. Relative to this, the impact of emissions from processing of fossil fuel, e.g., refining of oil to produce gasoline or diesel, and processing of biomass to produce electricity or transportation fuels, is minor.     

Comparing Green and Grey Infrastructure Using Life Cycle Cost and Environmental Impact: A Rain Garden Case Study in Cincinnati,OH

Green infrastructure (GI) is quickly gaining ground as a less costly, greener alternative to traditional methods of stormwater management. One popular form of GI is the use of rain gardens to capture and treat stormwater. We used life cycle assessment (LCA) to compare environmental impacts of residential rain gardens constructed in the Shepherd's Creek watershed of Cincinnati, Ohio to those from a typical detain and treat system. LCA is an internationally standardized framework for analyzing the potential environmental performance of a product or service by including all stages in its life cycle, including material extraction, manufacturing, use, and disposal. Complementary to the life cycle environmental impact assessment, the life cycle costing approach was adopted to compare the equivalent annual costs of each of these systems. These analyses were supplemented by modeling alternative scenarios to capture the variability in implementing a GI strategy. Our LCA models suggest rain garden costs and impacts are determined by labor requirement; the traditional alternative's impacts are determined largely by the efficiency of wastewater treatment, while costs are determined by the expense of tunnel construction. Gardens were found to be the favorable option, both financially (~42% cost reduction) and environmentally (62‐98% impact reduction). Wastewater utilities may find significant life cycle cost and environmental impact reductions in implementing a rain garden plan.     

A Conceptual Model for Describing Decision-Making Situations in Integrated Natural Resource Planning and Modeling Projects1

A conceptual model is developed herein for the purpose of stimulating discussions within groups planning and carrying out integrated natural resource projects. We first describe four basic components of integrated planning and modeling efforts: people, databases, technology, and organizational commitment. Second, we provide one view of the relationship between the size of the project's decision-making body and the timing of decisions during a project's life cycle. Finally, these two discussions are combined into a conceptual model describing the dynamic nature of decision-making within integrated projects. The abstractions and generalizations described here are not unique to private industry or governmental organizations and should provide the basis for a discussion of decision-making issues among interdisciplinary professionals embarking on large-scale or complex modeling efforts.     

Experimental investigation into performance of integrated hotbox in 1-kW solid oxide fuel cell system

An experimental investigation is performed to evaluate the performance of an integrated hotbox in a 1-kW solid oxide fuel cell (SOFC) system fed by natural gas. The integrated hotbox comprises all the main balance of plant components of an SOFC system, i.e. afterburner, reformer, and heat exchanger, and it not only reduces the physical size of the system but also yields improved system efficiency. The experimental results show that under optimal operating conditions, the combined H₂ and CO content of the reformate gas is approximately 70%, while both anode and cathode in-gas temperatures are around approximately 750°C.     

An ecological approach to environmental impact assessment

Carbon cycling analysis is presented as a means for assessing anthropogenic perturbations in an ecosystem. Data from oligotrophic, eutrophic, and dystrophic (bog) lakes are used to show general trends in the lacustrine carbon cycle. The oligotrophic lake is an unstressed system and the eutrophic lake is under nutrient enrichment with high algal standing crops and productivity. The bog lake is a pH-stressed environment that is primarily a grazing ecosystem. It is hoped that a more effective environmental impact assessment will result from the use of carbon cycling as a unifying concept in ecosystem analysis.