Binding of triclosan to human serum albumin: insight into the molecular toxicity of emerging contaminant

Purpose

The interaction between triclosan (TCS) and human serum albumin (HSA) was investigated in order to obtain the binding mechanism, binding constant, the type of binding force, the binding distance between the donor and acceptor, and the effect of TCS on the conformation change of HSA.

Methods

A HSA solution was added to the quartz cell and then titrated by successive addition of TCS. The fluorescence quenching spectra and synchronous spectra were recorded with the excitation and emission slits of the passage of band set at 10 and 20 nm. Three-dimensional fluorescence spectra of HSA were recorded before and after the addition of TCS. The capillary electrophoresis was conducted with the pressure injection mode at 0.5 psi for 5 s, separation under 25 kV, and detection at 214 nm.

Results

Fluorescence data indicated the fluorescence quenching of HSA by TCS was static quenching, and the quenching constants (K _a ) were 1.14?×?10⁵, 8.75?×?10⁴, 6.67?×?10⁴, and 5.00?×?10⁴ at 293, 298, 303, and 309 K, respectively. The thermodynamic parameters, enthalpy change (??H) and entropy change (??S) for the interaction were calculated to be ?37.9 kJ mol^?1 and 32.6 J?mol^?1 K^?1. The binding distance between TCS and tryptophan residues of HSA was obtained to be 1.81 nm according to F??rster nonradioactive energy transfer theory. The UV-Vis absorption spectroscopy, the synchronous fluorescence spectroscopy, three-dimensional fluorescence spectroscopy, and circular dichroism spectroscopy revealed the alterations of HSA secondary structure in the presence of TCS. Finally, the interaction between TCS and HSA was further confirmed by capillary electrophoresis.

Conclusions

TCS was bound to HSA to form the TCS-HSA complex, with the binding distance of 1.81 nm. Hydrophobic interaction and hydrogen bond were dominated in the binding. TCS could change the secondary conformation of HSA. This work provides an insight into noncovalent interaction between emerging pollutants and protein, helping to elucidate the toxic mechanism of such pollutants.     

Potential toxicity of amphenicol antibiotic: binding of chloramphenicol to human serum albumin

Antibiotics are widely used in daily life but their abuse has posed a potential threat to human health. To evaluate the toxicity of chloramphenicol (CAP) at the protein level, the interaction between CAP and human serum albumin (HSA) was investigated by fluorescence, Ultraviolet–visible (UV–Vis) absorption, Fourier transform infrared (FT-IR) spectroscopy and molecular docking methods. Fluorescence data revealed that the fluorescence quenching of HSA by CAP was the result of the formation of CAP–HSA complex, and the binding constant was determined to be 3.196?×?10⁴ L mol^?1 at 310 K. The thermodynamic determination indicated that the interaction was driven by enthalpy change and entropy change together, where the multiple hydrogen bonds (CAP and the residues Arg 222 and His 242 of HSA) and van der Waals forces were the dominant binding force. The site marker competition revealed that CAP bound into sub-domain IIA of HSA. The binding of CAP induced the drastic reduction in α-helix conformation and the significant enhancement in β-sheet conformation of HSA. Molecular docking study further confirmed the binding mode obtained by experimental study. This work provides a new quantitative evaluation method for antibiotics to cause the protein damage.     

Investigations on the interaction of the phototoxic alkaloid coralyne with serum albumins

The interaction of the phototoxic alkaloid coralyne with bovine and human serum albumins (BSA, HSA) was investigated. Absorbance and fluorescence quenching experiments revealed the formation of strong complexes. Based on the binding parameters calculated from Stern-Volmer quenching method, coralyne has higher affinity to BSA (∼10⁵ M⁻¹) compared to HSA (∼10⁴ M⁻¹). Forster resonance energy transfer studies showed that the specific binding distances between Trp (donor) of the proteins and coralyne (acceptor) were 2.95 and 3.10 nm, respectively. The bindings were favored by negative enthalpy and a stronger favorable entropy contribution. The heat capacity values for binding to BSA and HSA were similar, indicating the involvement of similar molecular forces in the complexation. Competitive binding experiments using site markers demonstrated that coralyne binds to site I (subdomain IIA) of both proteins. The secondary structure of the proteins was altered, suggesting a small but definitive partial unfolding on complexation.     

Methyl-triclosan binding to human serum albumin: Multi-spectroscopic study and visualized molecular simulation

Methyl-triclosan (MTCS), a transformation product and metabolite of triclosan, has been widely spread in environment through the daily use of triclosan which is a commonly used anti-bacterial and anti-fungal substance in consumer products. Once entering human body, MTCS could affect the conformation of human serum albumin (HSA) by forming MTCS–HSA complex and alter function of protein and endocrine in human body. To evaluate the potential toxicity of MTCS, the binding mechanism of HSA with MTCS was investigated by UV–vis absorption, circular dichroism and Fourier transform infrared spectroscopy. Binding constants, thermodynamic parameters, the binding forces and the specific binding site were studied in detail. Binding constant at room tempreture (T = 298 K) is 6.32 × 10³ L mol⁻¹; ΔH⁰, ΔS⁰ and ΔG⁰ were 22.48 kJ mol⁻¹, 148.16 J mol⁻¹ K⁻¹ and −21.68 kJ mol⁻¹, respectively. The results showed that the interactions between MTCS and HSA are mainly hydrophobic forces. The effects of MTCS on HSA conformation were also discussed. The binding distance (r = 1.2 nm) for MTCS–HSA system was calculated by the efficiency of fluorescence resonance energy transfer. The visualized binding details were also exhibited by molecular modeling method and the results could agree well with that from the experimental study.     

Investigation on the interaction between triclosan and bovine serum albumin by spectroscopic methods

Abstract

Multi-spectroscopic and molecular docking methods were used to study the interaction between triclosan (TCS) and bovine serum albumin (BSA). The results indicated that the fluorescence quenching of BSA by TCS was due to the formation of TCS–BSA complex through static quenching. This result was also demonstrated by time-resolved fluorescence experiment. The binding constants and number of binding sites between TCS and BSA were 1.30?×?10⁵ M^?1 and 1.17 at 298?K, respectively. The thermodynamic parameters were studied in detail which suggested that hydrophobic forces and hydrogen bond played major roles in the TCS–BSA interaction. Moreover, the site marker competitive experiments and docking studies revealed that TCS could bind BSA into site I in subdomain IIA. All the results of UV–vis spectrophotometry, circular dichroism spectroscopy and synchronous fluorescence spectroscopy showed that interaction between TCS and BSA induced conformation changes of BSA.     

New insight into molecular interaction of heavy metal pollutant—cadmium(II) with human serum albumin

Cadmium (Cd) is an extremely toxic metal commonly found as an environmental contaminant from industrial and agricultural sources, posing severe risks to human health. In this study, the binding mechanism of Cd(II)–human serum albumin (HSA) complex and the effect of Cd(II) on the conformational stability and structural state of HSA were comprehensively investigated through a series of efficient and appropriate methods. X-ray photoelectron spectroscopy accurately described the microenvironmental changes around protein C, N, and O atoms in the presence of Cd(II). Fluorescence results indicated that the probable mechanism of Cd(II)–HSA interaction is a static quenching process. Fourier transform infrared spectroscopy and dynamic light scattering showed Cd(II) complexation altered HSA conformation and the microenvironments of Trp and Tyr residues, accompanied by the size increases of HSA aggregates. This research will be helpful for understanding the toxic effects of Cd(II) on protein function in vivo.

Investigation of the binding and simultaneous quantifications of propanil and bromoxynil herbicide concentrations in human serum albumin

This study reported the use of UV–visible and fluorescence spectroscopy and partial-least-square (PLS) multivariate regression for accurate and simultaneous quantifications of two widely used herbicides, propanil, 3′,4′-dichloropropionanilide (PPL) and bromoxynil, 3,5-dibromo-4-hydroxybenzonitrile (BXL) in human serum albumin (HSA) at physiological conditions. The binding affinity and thermodynamic properties of PPL-HSA and BXL-HSA complexes were also investigated. Partial-least-square (PLS) regression was used to collate the variability in the absorption or emission spectra of PPL-HSA and BXL-HSA complexes with PPL and/or BXL concentrations in HSA samples. The binding constants of 7.66× 10⁸ M^?1 for PPL-HSA and 4.88× 10⁶ M^?1 for BXL-HSA complexes were calculated at physiological conditions (temperature, 310 K; pH 7.4). Thermodynamic parameter values: enthalpy (ΔH) (13.99 kJ mol^?1), entropy (ΔS) (0.078 kJ mol^?1 K^?1), and Gibbs free energy (ΔG) (?10.19 kJ mol^?1) were determined for PPL-HSA complexation at physiological conditions. However, differences in thermodynamic property values of: ΔH (?214.3 kJ mol^?1), ΔS (?0.563 kJ mol^?1 K^?1), and ΔG (?39.70 kJ mol^?1) were observed for BXL–HSA complexes. The binding constants and negative ΔG values indicated strong binding affinity and thermodynamically favorability of PPL–HSA and BXL–HSA complex formation. Results of the PLS regression calibration showed good linearity (R² ≥ 0.998289), high sensitivity, and impressive low limit-of-detections (LODs) of 1.38× 10^?8 M for PPL and 1.68× 10^?8 M for BXL that are comparable and/or lower than many previously reported LODs for herbicide and pesticide analyses. Most importantly, PLS regression is capable of simultaneous quantifications of PPL and BXL concentrations in HSA samples with good accuracy and low errors of 3.66%. UV–visible spectrophotometers and spectrofluorometers are fairly inexpensive, easy to use, and are readily available in almost every laboratory, making this protocol excellent and affordable for routine analysis of weed/pest control chemical residues in humans. The results of this study are significant and remarkable that will provide critical insight into the binding mechanism of herbicide toxicity in humans and non-target organisms, which are of special interest in the area of biomedical study, environmental risk assessment, and ecotoxicology.     

Interaction of tebuconazole with bovine serum albumin: determination of the binding mechanism and binding site by spectroscopic methods

Abstract

This study investigates the interaction between tebuconazole and bovine serum albumin (BSA) in a physiological buffer (pH = 7.4) using the fluorescence quenching method to obtain the apparent binding constants (K) and number of binding sites (n) in the interaction between tebuconazole and BSA. The results revealed that tebuconazole can quench the intrinsic fluorescence of BSA through a static quenching procedure. It also shows that the thermodynamic parameters of enthalpy change (ΔH) and entropy change (ΔS) are negative, indicating that the interaction of tebuconazole with BSA is mainly driven by van der Waals forces and hydrogen bonds. The process of binding was a spontaneous process in which Gibbs free energy change was negative. The distance of r between the donor (BSA) and acceptor (tebuconazole) was calculated to be 0.68?nm based on Forster’s non-radiative energy transfer theory. Analysis of synchronous fluorescence, three-dimensional fluorescence and circular dichroism (CD) spectra demonstrates that tebuconazole can induce conformational changes of BSA.     

Degradation of diuron in aqueous solution by ozonation

Degradation of diuron [3-(3,4-dichlorophenyl)-1,1-dimethylurea] in aqueous solution and the proposed degradation mechanism of diuron by ozonation were investigated. The factors that affect the degradation efficiency of diuron were examined. The generated inorganic ions and organic acids during the ozonation process were detected. Total organic carbon removal rate and the amount of the released Cl^? increased with increasing ozonation time, but only 80.0% of the maximum theoretical concentration of Cl^? at total mineralization was detected when initial diuron concentration was 13.8 mg L^?1. For N species, the final concentrations of NO₃ ^? and NH₄ ⁺ after 60 min of reaction time were 0.28 and 0.19 mg L^?1, respectively. The generated acetic acid, formic acid and oxalic acid were detected during the reaction process. The main degradation pathway of diuron by ozonation involved a series of dechlorination-hydroxylation, dealkylation and oxidative opening of the aromatic ring processes, leading to small organic species and inorganic species. The degradation efficiency of diuron increased with decreasing initial diuron concentration. Higher pH value, more ozone dosage, additive Na₂CO₃, additive NaHCO₃ and additive H₂O₂ were all advantageous to improve the degradation efficiency of diuron.     

Elevated water temperature reduces the acute toxicity of the widely used herbicide diuron to a green alga, Pseudokirchneriella subcapitata

In the actual environment, temperatures fluctuate drastically through season or global warming and are thought to affects risk of pollutants for aquatic biota; however, there is no report about the effect of water temperature on toxicity of widely used herbicide diuron to fresh water microalgae. The present research investigated inhibitory effect of diuron on growth and photosynthetic activity of a green alga Pseudokirchneriella subcapitata at five different temperatures (10, 15, 20, 25, and 30 °C) for 144 h of exposure. As a result, effective diuron concentrations at which a 50 % decrease in algal growth occurred was increased with increasing water temperature ranging from 9.2 to 20.1 μg L^–1 for 72 h and 9.4–28.5 μg L^–1 for 144 h. The photochemical efficiency of photosystem II (F _v/F _m ratio) was significantly reduced at all temperatures by diuron exposure at 32 μg L^–1 after 72 h. Inhibition rates was significantly increased with decreased water temperature (P?<?0.01). Intracellular H₂O₂ levels as an indicator of oxidative stress were also decreased with increasing temperature in both control and diuron treatment groups and were about 2.5 times higher in diuron treatment groups than that of controls (P?<?0.01). Our results suggest water temperatures may affect the toxicokinetics of diuron in freshwater and should therefore be considered in environmental risk assessment.     

Sorption-Desorption of Atrazine and Diuron in Soils from Southern Brazil

The objective of this study was to investigate the behavior of sorption and desorption of the herbicides atrazine (6-chloro-N ²-ethyl-N ⁴-isopropyl-1,3,5-triazine-2,4-diamine) and diuron [3-(3,4-dichlorophenyl)-1,1-dimethyleurea] in soil samples from a typical lithosequence located in the municipality of Mamborê (PR), southern Brazil. Five concentrations of ¹⁴C-atrazine and ¹⁴C-diuron were used for both herbicides (0.48, 0.96, 1.92, 3.84, and 7.69 mg L^?1). Sorption of both herbicides correlated positively with the organic carbon and clay content of the soil samples. Sorption isotherms were well described by the Freundlich model. The slope values of the isotherm (N) ranged from 0.84 to 0.90 (atrazine) and from 0.75 to 0.79 (diuron) for the lithosequence samples. Sorption of diuron was high regardless of the soil texture or the concentration added. The desorption isotherms for atrazine and diuron showed good fit to the Freundlich equation (R ² ≥ 0,87). Atrazine slope values for the desorption isotherms were similar for the different concentrations and were much lower than those observed for the sorption isotherms. Significant hysteresis was observed in the herbicide desorption. When the two herbicides were compared, it was found that diuron (N = 0.06–0.22) presented more pronounced hysteresis than atrazine. The results showed that, quantitatively, a greater atrazine fraction applied to these soils remains available to be leached in the soil profile, as compared to diuron.     

Quantification of the interactions between Ca,Hg and extracellular polymeric substances (EPS) of sludge

The interactions between metals (Ca²⁺ and Hg²⁺) and extracellular polymeric substances (EPS) extracted from the aerobic and anaerobic sludge in wastewater treatment reactors were investigated using a combination of zeta potential measurement and 3-dimensional excitation–emission matrix (EEM) fluorescence spectroscopy with parallel factor (PARAFAC) analysis. Results show that Ca²⁺ had no substantial effects on the EEM fluorescence spectra of the EPS, but their zeta potentials increased with the increasing Ca²⁺ dosage. However, Hg²⁺ had a significant effect on the EEM fluorescence spectra of the EPS, while their zeta potentials seemed not to be affected by the dose of Hg²⁺. The interactions between Hg²⁺ and EPS were elucidated using the fluorescence quenching with PARAFAC analysis, while the interactions between Ca²⁺ and EPS were evaluated by the zeta potential technique. The binding constants for Hg²⁺ and EPS were two orders of magnitude higher than those for Ca²⁺ and EPS, suggesting that the binding mechanisms between Ca²⁺ and EPS were different from those between Hg²⁺ and EPS. The results might be useful for understanding the roles of EPS in bacterial self-protection against heavy metals and the aggregate formation mechanisms through ionic bridging interactions.     

Kinetics and equilibrium properties of the biosorption of Cu2+ by algae

The purpose of this study was to examine the kinetics and equilibrium properties of freshwater algae with Cu²⁺. This was a model system to explore using algae as biosensors for water quality. Methods included making luminescence measurements (fluorescence) and copper ion-selective electrode (CuISE) measurements vs. time to obtain kinetic data. Results were analyzed using a pseudo-first-order model to calculate the rate constants of Cu²⁺ uptake by algae: k _p(Cu?Calgae)?=?0.0025?±?0.0006?s^?1 by CuISE and k _p(Cu?Calgae)?=?0.0034?±?0.0011?s^?1 by luminescence. The binding constant of Cu?Calgae, K _Cu?Calgae, was 1.62?±?0.07?×?10⁷?M^?1. Fluorescence results analyzed using the Stern?CVolmer relationship indicate that algae have two types of binding sites of which only one appears to affect quenching. The fluorescence-based method was found to be able to detect the reaction of algae with Cu²⁺ quickly and at a detection limit of 0.1?mg?L^?1.     

Absorption and translocation of sulfometuron-methyl in sugarcane (Saccharum officinarum L.) at different growth stages

ABSTRACT

In Brazil, weed management in sugarcane fields is mainly done with the use of selective herbicide formulations. For many years, diuron+hexazinone was one of the main herbicide mixture formulations used in sugarcane. Later, sulfometuron-methyl was included in the same mixture, which was marketed as a new herbicide formulation for residual in-season weed control in sugarcane. The mixture diuron+hexazinone+sulfometuron-methyl has been widely used in commercial sugarcane fields in Brazil. However, recent field observations have shown that sugarcane plants at different growth stages varied in their phytotoxicity levels after treatment with diuron+hexazinone+sulfometuron-methyl. Greenhouse and laboratory studies were conducted to determine ¹⁴Csulfometuron-methyl absorption and translocation, as well as ¹⁴C distribution in sugarcane at two growth stages, 2 to 3 leaves and 5 to 6 leaves. ¹⁴Csulfometuron-methyl absorption by sugarcane did not differ between the two growth stages. Different patterns of ¹⁴C accumulation were observed, which may explain variations in sulfometuron-methyl phytotoxic responses observed in the field.     

Study on the mechanism of action between dimethyl phthalate and herring sperm DNA at molecular level

Dimethyl phthalate (DMP), a typical phthalic acid ester, is widespread in the environment and causes extensive concern due to its adverse effects on human health. To understand the genotoxicity of DMP at molecular level, the toxic interaction of DMP with herring sperm (hs) deoxyribonucleic acid (DNA; hs-DNA) was investigated in vitro under simulated physiological conditions using multi-spectroscopic techniques and a molecular modeling method. The results of Ultraviolet-Visible absorption spectroscopy, fluorescence emission spectroscopy, and circular dichroism spectra indicated that DMP interacts with hs-DNA in a groove-binding mode that changes the double helical structure of DNA. The binding constant and the number of binding sites calculated from the fluorescence quenching data were 565.718 L mol^?1 and 0.7872, respectively. A molecular modeling study revealed that DMP tends to bind with DNA in the A-T-rich regions of minor groove and that hydrogen bonding and van der Waals forces play main roles in the interaction. This research can help to elucidate the mechanism of DMP toxicity in vivo.     

Exploitation of subabul stem lignin as a matrix in controlled release agrochemical nanoformulations: a case study with herbicide diuron

The utilization of nanomaterials in the domain of agriculture is at an inception, especially in the development of controlled release agrochemical nanoformulations. The present study demonstrated the potential of subabul stem lignin as a matrix material in agrochemical formulations using nanotechnology. In this study, “nanoprecipitation” method was employed and “optimized” to fabricate a stable herbicide, “diuron nanoformulation” (DNF). “Optimized DNF” (ODNF) has 5.17?±?0.49 % diuron loading efficiency (DLE) and 74.3?±?4 % encapsulation efficiency (EE). The size of nanoparticles in ODNF was 166?±?68 nm as revealed by FESEM/TEM studies. Physicochemical characterization of ODNF by UV, FT-IR, and DSC studies revealed the successful loading of diuron within the lignin matrix. The ODNF exhibited nonlinear biphasic release profile for diuron. Further, the bioefficacy of diuron released from ODNF was tested using canola (Brassica rapa). B. rapa seedlings grown in the soil supplemented with ODNF showed early signs of leaf chlorosis and mortality when compared with seedlings grown in the presence of commercial diuron formulation (CDF) or bulk diuron (BD), respectively. This study not only revealed the exploitation of subabul stem lignin as a “matrix” in the controlled release nanoformulation of diuron but also opened up new avenues for utilizing it as matrix for several other agrochemicals associated with the growth and development of the plant.     

Relating dissolved organic matter fluorescence and functional properties

The fluorescence excitation–emission matrix properties of 25 dissolved organic matter samples from three rivers and one lake are analysed. All sites are sampled in duplicate, and the 25 samples include ten taken from the lake site, and nine from one of the rivers, to cover variations in dissolved organic matter composition due to season and river flow. Fluorescence properties are compared to the functional properties of the dissolved organic matter; the functional assays provide quantitative information on photochemical fading, buffering capacity, copper binding, benzo[a]pyrene binding, hydrophilicity and adsorption to alumina. Optical (absorbance and fluorescence) characterization of the dissolved organic matter samples demonstrates that (1) peak C (excitation 300–350 nm; emission 400–460 nm) fluorescence emission wavelength; (2) the ratio of peak T (excitation 220–235 nm; emission 330–370 nm) to peak C fluorescence intensity; and (3) the peak C fluorescence intensity: absorbance at 340 nm ratio have strong correlations with many of the functional assays. Strongest correlations are with benzo[a]pyrene binding, alumina adsorption, hydrophilicity and buffering capacity, and in many cases linear regression equations with a correlation coefficient >0.8 are obtained. These optical properties are independent of freshwater dissolved organic carbon concentration (for concentrations <10 mg L⁻¹) and therefore hold the potential for laboratory, field and on-line monitoring and prediction of organic matter functional properties.     

Study on the spectral and Cu (II) binding characteristics of DOM leached from soils and lake sediments in the Hetao region

Introduction

Dissolved organic matter (DOM) is the most active component in environmental system and its chemical and structural characteristics most likely influence its biodegradation. Four surface soil (0?C20?cm) and three core sediment samples (0?C10?cm) were collected from Wuliangsuhai Lake. The objectives of this study were to investigate the spectral properties and humification degree of DOM and to determine and discuss comparatively the complexing capacities and stability constants of DOM by Cu (II) in the Hetao region.

Materials and methods

In this study, fluorescence spectra and fluorescence quenching methods were used to evaluate the humification degree of DOM and calculate the complexing capacities and the stability constants between DOM and Cu (II).

Results and discussion

Two defined peaks, at wavelengths of 260??300?nm (peak I) and 300??350?nm (peak II), could be identified for soil DOM at a ???? value of 30?nm. In sediment DOM extracts, a third peak (III) was observed near 364?nm. The results show that there is a significant difference in the structure of DOM because of different sources. The humification degree is significantly higher for soil samples than those of sediment samples. The FT-IR spectra of DOM show that structure in sediment DOM is more functional groups than those in soil DOM. DOM has a stronger Cu binding affinity in soils than in sediment in the Hetao region, which may lead to potentially significant influence on the migration and transformation of Cu (II).     

Relating dissolved organic matter fluorescence and functional properties

The fluorescence excitation–emission matrix properties of 25 dissolved organic matter samples from three rivers and one lake are analysed. All sites are sampled in duplicate, and the 25 samples include ten taken from the lake site, and nine from one of the rivers, to cover variations in dissolved organic matter composition due to season and river flow. Fluorescence properties are compared to the functional properties of the dissolved organic matter; the functional assays provide quantitative information on photochemical fading, buffering capacity, copper binding, benzo[a]pyrene binding, hydrophilicity and adsorption to alumina. Optical (absorbance and fluorescence) characterization of the dissolved organic matter samples demonstrates that (1) peak C (excitation 300–350 nm; emission 400–460 nm) fluorescence emission wavelength; (2) the ratio of peak T (excitation 220–235 nm; emission 330–370 nm) to peak C fluorescence intensity; and (3) the peak C fluorescence intensity: absorbance at 340 nm ratio have strong correlations with many of the functional assays. Strongest correlations are with benzo[a]pyrene binding, alumina adsorption, hydrophilicity and buffering capacity, and in many cases linear regression equations with a correlation coefficient >0.8 are obtained. These optical properties are independent of freshwater dissolved organic carbon concentration (for concentrations <10 mg L⁻¹) and therefore hold the potential for laboratory, field and on-line monitoring and prediction of organic matter functional properties.     

The complexation of Cu(II) by anthropogenic fulvic acids extracted from composted urban and livestock wastes

Abstract

The fulvic acid (fua) fractions of two samples of composted solid wastes [urban (urfua) and livestock (lsfua) wastes], commercialized to be used in agriculture as organic correctives or fertilizers, were analyzed for their affinity towards Cu(II) at pH=6. Molecular fluorescence spectroscopy (synchronous mode) was used to monitor the quenching caused by the complexation upon addition of Cu(II) to fua. Spectral data were preprocessed by a chemometric self‐modeling mixture analysis method (SIMPLISMA) to detect the number of different types of fluorescent binding sites that exist in each fua, their spectra and the corresponding quenching profiles [fluorescence intensity as function of the total Cu(II) concentration]. From the analysis of the quenching profiles, the amount of binding sites (Cl) and the corresponding conditional stability constants (K') were calculated. Both fua samples have approximately Cl = 0.21 mmol/g and the logarithms of K’ are 4.21(3) and 4.51(8), respectively for urfua and lsfua. The differences detected between these fua samples and those extracted from natural soils can be attributed mainly to the relatively small humification extent of the present anthropogenic fua samples.