Estimation of β-cyfluthrin and imidacloprid in okra fruits and soil by chromatography techniques

Dissipation of β-cyfluthrin and imidacloprid in okra was studied following three applications of a combination formulation of Solomon 300 OD (β-cyfluthrin 9 % + imidacloprid 21 %) @ 60 and 120 g a.i. ha(-1) at 7 days interval. Residues of β-cyfluthrin and imidacloprid in okra were estimated by gas liquid chromatography (GLC) and high performance liquid chromatography (HPLC), respectively. Residues of β-cyfluthrin were confirmed by gas chromatograph-mass spectrometry (GC-MS) and that of imidacloprid by high performance thin layer chromatography (HPTLC). Half-life periods for β-cyfluthrin were found to be 0.91 and 0.68 days whereas for imidacloprid these values were observed to be 0.85 and 0.96 days at single and double the application rates, respectively. Residues of β-cyfluthrin dissipated below its limit of quantification (LOQ) of 0.01 mg kg(-1) after 3 and 5 days at single and double the application dosage, respectively. Similarly, residues of imidacloprid took 5 and 7 days to reach LOQ of 0.01 mg kg(-1), at single and double dosages respectively. Soil samples collected after 15 days of the last application did not show the presence of β-cyfluthrin and imidacloprid at their detection limit of 0.01 mg kg(-1).     

Estimation of β-cyfluthrin and imidacloprid in okra fruits and soil by chromatography techniques

Dissipation of β-cyfluthrin and imidacloprid in okra was studied following three applications of a combination formulation of Solomon 300 OD (β-cyfluthrin 9 % + imidacloprid 21 %) @ 60 and 120 g a.i. ha^?1 at 7 days interval. Residues of β-cyfluthrin and imidacloprid in okra were estimated by gas liquid chromatography (GLC) and high performance liquid chromatography (HPLC), respectively. Residues of β-cyfluthrin were confirmed by gas chromatograph–mass spectrometry (GC-MS) and that of imidacloprid by high performance thin layer chromatography (HPTLC). Half-life periods for β-cyfluthrin were found to be 0.91 and 0.68 days whereas for imidacloprid these values were observed to be 0.85 and 0.96 days at single and double the application rates, respectively. Residues of β-cyfluthrin dissipated below its limit of quantification (LOQ) of 0.01 mg kg^?1 after 3 and 5 days at single and double the application dosage, respectively. Similarly, residues of imidacloprid took 5 and 7 days to reach LOQ of 0.01 mg kg^?1, at single and double dosages respectively. Soil samples collected after 15 days of the last application did not show the presence of β-cyfluthrin and imidacloprid at their detection limit of 0.01 mg kg^?1.     

Sorption–desorption and transport of trimethoprim and sulfonamide antibiotics in agricultural soil: effect of soil type,dissolved organic matter,and pH

Use of animal manure is a main source of veterinary pharmaceuticals (VPs) in soil and groundwater through a series of migration processes. The sorption–desorption and transport of four commonly used VPs including trimethoprim (TMP), sulfapyridine, sulfameter, and sulfadimethoxine were investigated in three soil layers taken from an agricultural field in Chongming Island China and two types of aqueous solution (0.01 M CaCl₂ solution and wastewater treatment plant effluent). Results from sorption–desorption experiments showed that the sorption behavior of selected VPs conformed to the Freundlich isotherm equation. TMP exhibited higher distribution coefficients (K _d?=?6.73–9.21) than other sulfonamides (K _d?=?0.03–0.47), indicating a much stronger adsorption capacity of TMP. The percentage of desorption for TMP in a range of 8–12 % is not so high to be considered significant. Low pH (<pK _a of tested VPs) and rich soil organic matter (e.g., 0–20 cm soil sample) had a positive impact on sorption of VPs. Slightly lower distribution coefficients were obtained for VPs in wastewater treatment plant (WWTP) effluent, which suggested that dissolved organic matter might affect their sorption behavior. Column studies indicated that the transport of VPs in the soil column was mainly influenced by sorption capacity. The weakly adsorbed sulfonamides had a high recovery rate (63.6–98.0 %) in the leachate, while the recovery rate of TMP was only 4.2–10.4 %. The sulfonamides and TMP exhibited stronger retaining capacity in 20–80 cm and 0–20 cm soil samples, respectively. The transport of VPs was slightly higher in the columns leached by WWTP effluent than by CaCl₂ solution (0.01 M) due to their sorption interactions.     

Modeling redistribution of α-HCH in Chinese soil induced by environment factors

This study explores long-term environmental fate of α-HCH in China from 1952 to 2007 using ChnGPERM (Chinese Gridded Pesticide Emission and Residue Model). The model captures well the temporal and spatial variations of α-HCH concentration in Chinese soils by comparing with a number of measured data across China in different periods. The results demonstrate α-HCH grasshopping effect in Eastern China and reveal several important features of the chemical in Northeast and Southeast China. It is found that Northeast China is a prominent sink region of α-HCH emitted from Chinese sources and α-HCH contamination in Southwest China is largely attributed to foreign sources. Southeast China is shown to be a major source contributing to α-HCH contamination in Northeast China, incurred by several environmental factors including temperature, soil organic carbon content, wind field and precipitation.     

Preparation of petroleum-degrading bacterial agent and its application in remediation of contaminated soil in Shengli Oil Field,China

Two petroleum-degrading strains were screened from oil fields and denoted as SWH-1 (Bacillus subtilis) and SWH-2 (Sphingobacterium multivorum), which were used to ferment and prepare bacterial agent to remediate petroleum-contaminated sites in Shengli Oil Field in China. The optimal liquid fermentation medium and conditions were MgSO₄·7H₂O (0.5 %), NaCl (0.5 %), soybean dregs (3 %), pH 7.0, culturing at 30 °C, and 220 r/min for 16 h. Peat was chosen as the bacterial carrier due to its ability of keeping microbial activity. Mixed fermented liquid was added into peat (1:2) and air-dried, and the bacterial agent was obtained. It was applied to the petroleum-contaminated soil, which was irrigated, tilled, and fertilized. The removal rate reached 67.7 % after 2 months of remediation. During remediation, the quantity of indigenous bacteria varied a lot, while the inoculated bacteria remained stable; the dehydrogenase activity was at high levels and then decreased. Indigenous microorganisms, inoculated bacterial agent, nutrients, water, and soil permeability all played important roles. The study prepared an environment-friendly bacterial agent and established a set of bioremediation technique, which provided further insights into integration of fermentation engineering and soil remediation engineering.     

Chloroform – concentration gradients in soil air and atmospheric air,and emission fluxes from soil

Since we demonstrated the natural formation of chloroform in soil, the question arose to which extent this contributes to the chloroform present in the atmosphere. Concentration gradients in soil air and atmospheric air of different forests were measured. Chloroform concentration gradients indicating emission occur in forest soils and the atmosphere under the canopy, whereas this was not observed for other chlorinated solvents. Above the canopy all concentration gradients observed for chloroform and 1,1,1-trichloroethane indicate deposition. The emission flux was measured using enclosures and calculated from the observed concentration gradients in soil air and atmospheric air. Wood-degrading areas and soils with a humic layer were found to emit up to 1000 ng chloroform m⁻² h⁻¹ and seem to be larger chloroform sources than the other areas of study. Rather unexpectedly, some points of one sampling site appeared to emit 1,1,1-trichloroethane, tetrachloromethane and tetrachloroethene. A reasonable agreement was found between the fluxes using enclosures and those derived from the concentration gradients in soil air and atmospheric air.     

Effect of acid rain on building material of the El Tajín archaeological zone in Veracruz, Mexico

Three limestone slabs (approx. 20 cm2 each) were extracted from the El Tajin archaeological zone in Veracruz, Mexico. X-ray diffraction analysis revealed three components: calcite (81.2%), quartz (17.9%) and feldspar (0.9%). Calcite content by x-ray diffraction analysis was slightly higher than that determined by chemical reaction between the limestone sample and nitric acid. The latter analysis, carried out in triplicate, yielded a calcite content of 77.1%. Mean water absorption, density and porosity of the limestone samples were also determined. Dissolution of limestone samples was investigated using an experimental rainfall simulation chamber, in which the stone samples were irrigated with artificial rain matching the pH and the ionic composition with 40 rainfall samples collected at El Tajin from August 18, 2002, to April 9, 2003. According to calcium and bicarbonate net concentrations found in the effluent of the chamber, a chemical mechanism by which limestone at El Tajin is dissolved by acid rain is proposed. A model used to investigate the air transport pathways corresponding to precipitation events at El Tajin shows that air parcels come mainly from the Gulf of Mexico, although no directional preference is evident for acidic vs. non-acidic events.     

Biodegradation of α and β Endosulfan in Soil as Influenced by Application of Different Organic Materials

Abstract

A laboratory pot experiment was conducted to study the effect of amending soil with four different sources of organic matter on the degradation rate of α and β endosulfan isomers. Poultry by-product meal, poultry manure, dairy manure, and municipal solid waste compost were cured, dried, ground (<1 mm) and thoroughly mixed with a calcareous soil at a rate of 2% and placed in plastic pots. Endosulfan was added at the rate of 20 mg kg^?1. The moisture level was kept near field capacity and the pots were kept at room temperature. Soil sub-samples, 100 g each, were collected from every pot at days 1, 8, 15, 22, 29, 43, and 57 for the measurement of endosulfan isomers. Endosulfan residues were extracted from the soil samples with acetone. The supernatant was filtered through anhydrous sodium sulphate, 5 mL aliquot was diluted to 25 mL with hexane, mixed well, and then two sub-samples from the filtrates were analyzed for α and β endosulfan isomers by gas chromatography. The results indicated that the half-life (T _½) of α-endosulfan in the poultry by-product meal treatment was 15 days compared to about 22 days in the other treatments. The T _½ of β-endosulfan was 22 days in the poultry by-product meal treatment and followed a bi-phasic pattern, 57 days in the municipal solid waste compost treatment and the extrapolated T _½ was about 115 days for the other three treatments.     

Diurnal variation in the concentration of α- and β-pinene in the landes forest (France)

The study deals with the identification and the determination of the main monoterpenes (α- and β-pinene) released by the pines in the Landes Forest in France. The measurements were taken after preconcentration using TENAX-GC and thermal desorption. The diurnal variation of atmospheric concentration of α- and β-pinene is established; it is less than 0.5 ppbV in the daytime and varies from 2 to 4 ppbV in the night-time. These variations are explained by the fact that the photochemical reactions and the turbulence phenomena to which the terpenes are exposed change quite radically from day to night. The terpene concentration, higher at 5 m than at 25 m, would seem to confirm the existence of a terpene source at ground level.     

17 β-estradiol mineralization in human waste products and soil in the presence and the absence of antimicrobials

Natural steroidal estrogens, such as 17 β-estradiol (E2), as well as antimicrobials such as doxycycline and norfloxacin, are excreted by humans and hence detected in sewage sludge and biosolid. The disposal of human waste products on agricultural land results in estrogens and antibiotics being detected as mixtures in soils. The objective of this study was to examine microbial respiration and E2 mineralization in sewage sludge, biosolid, and soil in the presence and the absence of doxycycline and norfloxacin. The antimicrobials were applied to the media either alone or in combination at total rates of 4 and 40 mg kg^?1, with the 4 mg kg^?1 rate being an environmentally relevant concentration. The calculated time that half of the applied E2 was mineralized ranged from 294 to 418 days in sewage sludge, from 721 to 869 days in soil, and from 2,258 to 14,146 days in biosolid. E2 mineralization followed first-order and the presence of antimicrobials had no significant effect on mineralization half-lives, except for some antimicrobial applications to the human waste products. At 189 day, total E2 mineralization was significantly greater in sewage sludge (38 ±0.7%) > soil (23 ±0.7%) > biosolid (3 ±0.7%), while total respiration was significantly greater in biosolid (1,258 mg CO₂) > sewage sludge (253 mg CO₂) ≥ soil (131 mg CO₂). Strong sorption of E2 to the organic fraction in biosolid may have resulted in reduced E2 mineralization despite the high microbial activity in this media. Total E2 mineralization at 189 day was not significantly influenced by the presence of doxycycline and/or norfloxacin in the media. Antimicrobial additions also did not significantly influence total respiration in media, except that total CO₂ respiration at 189 day was significantly greater for biosolid with 40 mg kg^?1 doxycycline added, relative to biosolid without antimicrobials. We conclude that it is unlikely for doxycycline and norfloxacin, or their mixtures, to have a significant effect on E2 mineralization in human waste products and soil. However, the potential for E2 to be persistent in biosolids, with and without the presence of antimicrobials, is posing a challenge for biosolid disposal to agricultural lands.     

Fate of nickel in a lime-stabilized biosolid,a calcareous soil and soil–biosolid mixtures

Soil contamination with anthropogenic metals resulting from biosolid application is widespread around the world. To better predict the environmental fate and mobility of contaminants, it is critical to study the capacity of biosolid-amended soils to retain and release metals. In this paper, nickel adsorption onto a calcareous soil, a lime-stabilized biosolid, and soil–biosolid mixtures (30, 75, and 150 t biosolid/ha) was studied in batch experiments. Sorption experiments showed that (1) Ni adsorption was higher onto the biosolid than the calcareous soil, and (2) biosolid acted as an adsorbent in the biosolid–soil mixtures by increasing Ni retention capacity. The sorption tests were complemented with the estimation of Ni adsorption reversibility by successive applications of extraction solutions with water, calcium (100 mg/L), and oxalic acid (equivalent to 100 mg carbon/L). It has been shown that Ni desorption rates in soil and biosolid-amended soils were lower than 30 % whatever the chemical reagent, indicating that Ni was strongly adsorbed on the different systems. This adsorption/desorption hysteresis effect was particularly significant at the highest biosolid concentration (150 t/ha). Finally, an adsorption empirical model was used to estimate the maximum permissible biosolid application rate using French national guideline. It has been shown that desorption effects should be quantitatively considered to estimate relevant biosolid loadings.     

Laboratory studies on volatilization and mineralization of 14c‐p,p'‐DDT in soil,release of bound residues and dissipation from solid surfaces

Abstract

In support of field data, laboratory studies were conducted on volatilization, mineralization and binding of ¹⁴C‐p,p'‐DDT in soils at Sao Paulo. Incubation of soil for 6 weeks did not result in volatilized organics or mineralization; with >95% extractable radiocarbon in the form of p,p'‐DDT. Small amounts of bound residues (1.8%) were detected in soil. These data confirm the very slow dissipation of DDT in the field which presumably relates to the acidic pH of soil (4.5–4.8).

Bound ¹⁴C‐residues in soils treated with ¹⁴C‐p,p'‐DDT at Praia Grande and Sao Paulo could be released (5–21%) by sulphuric acid treatment. The released residue had the composition: 69–90% DDT, 7–32% DDD and 0–3% DDE. Incubation of soil bound ¹⁴C‐residues with fresh inoculum for 3 months did not result in release of ¹⁴C.

Dissipation from wooden surfaces was fairly slow. After 20 weeks, 74% of the applied radioactivity could be recovered; 44% hexane‐non‐extractable.     

Ascorbic acid, β-carotene, sugars, phenols, and heavy metals in sweet potatoes grown in soil fertilized with municipal sewage sludge

Municipal sewage sludge (MSS) used for land farming typically contains heavy metals that might impact crop quality and human health. A completely randomized experimental design with three treatments (six replicates each) was used to monitor the impact of mixing native soil with MSS or yard waste (YW) mixed with MSS (YW +MSS) on: i) sweet potato yield and quality; ii) concentration of seven heavy metals (Cd, Cr, Mo, Cu, Zn, Pb, and Ni) in sweet potato plant parts (edible roots, leaves, stem, and feeder roots); and iii) concentrations of ascorbic acid, total phenols, free sugars, and β-carotene in sweet potato edible roots at harvest. Soil samples were collected and analyzed for total and extractable metals using two extraction procedures, concentrated nitric acid (to extract total metals from soil) as well as CaCl? solution (to extract soluble metals in soil that are available to plants), respectively. Elemental analyses were performed using inductively coupled plasma mass spectrometry (ICP-MS). Overall, plant available metals were greater in soils amended with MSS compared to control plots. Concentration of Pb was greater in YW than MSS amendments. Total concentrations of Pb, Ni, and Cr were greater in plants grown in MSS+YW treatments compared to control plants. MSS+YW treatments increased sweet potato yield, ascorbic acid, soluble sugars, and phenols in edible roots by 53, 28, 27, and 48%, respectively compared to plants grown in native soil. B-carotene concentration (157.5 μg g?1 fresh weight) was greater in the roots of plants grown in MSS compared to roots of plants grown in MSS+YW treatments (99.9 μg g?1 fresh weight). Concentration of heavy metals in MSS-amended soil and in sweet potato roots were below their respective permissible limits.     

Effects of conditioning,cross‐conditioning,and microbial growth on development of enhanced biodegradation of insecticides in soil

Abstract

Pretreatment of a Drummer‐Catlin soil mixture with granular formulations of carbofuran or trimethacarb enhanced biodegradation of subsequent treatments with the technical formulations. Degradation of carbofuran was enhanced by pretreatments with trimethacarb, and degradation of trimethacarb was enhanced by pretreatments with carbofuran. Bendiocarb degradation was enhanced by pretreatments of soil with carbofuran or trimethacarb. In bioassays with southern corn rootworm larvae, biological activity of carbofuran, trimethacarb, and bendiocarb was rapidly lost in soils pretreated with granular formulations. Pretreatment of soil with granular terbufos did not enhance the biodegradation of subsequent applications of technical terbufos. Several microbial biomass assays showed an increase in specific carbofuran‐degrading bacteria in soils that were pretreated with carbofuran. Bacteria were isolated that could grow on carbofuran and apparently degrade it when present with another carbon source.     

The rate of soil reduction as affected by levels of methyl parathion and 2, 4‐D

Abstract

A simple technique was demonstrated for determining the potential for synthetic organics to stress microbial populations. Oxidized Crowley and Cecil soil materials were amended with varying concentrations of 2,4‐D and methyl parathion, flooded, and then analyzed for changes in pH, redox potential, and levels of soluble plus exchangeable Fe, Mn, and Zn, all of which may be directly or indirectly influenced by the activity of soil microorganisms. At the concentrations tested (up to 75 ppm), there was little effect of 2,4‐D, but methyl parathion apparently did affect microbial activity contributing to changes in the measured soil properties upon flooding. This approach may be a useful technique for screening various compounds for their potential to stress microbial activity that, for many researchers, would be easier than direct observations of microbial parameters such as population numbers and classifications, and enzyme levels.     

Uptake of heavy metals and As by Brassica juncea grown in a contaminated soil in Aznalcóllar (Spain): the effect of soil amendments

Two crops of Brassica juncea (L.) Czern. were grown in a field experiment, at the site affected by the toxic spillage of acidic, metal-rich waste in Aznalcóllar (Seville, Spain), to study its metal accumulation and the feasibility of its use for metal phytoextraction. The effects of organic soil amendments (cow manure and mature compost) and lime on biomass production and plant survival were also assessed; plots without organic amendment and without lime were used as controls. Plots, with or without organic amendment, having pH < 5 were limed for the second crop. Soil acidification conditioned plant growth and metal accumulation. The addition of lime and the organic amendments achieved higher plant biomass production, although effects concerning metal bioavailability and accumulation were masked somewhat by pH variability with time and between and within plots. Tissue metal concentrations of B. juncea were elevated for Zn, Cu and Pb, especially in leaves of plants from plots with low pH values (maxima of 2029, 71 and 55 microg g(-1), respectively). The total uptake of heavy metals in the plants was relatively low, emphasising the problems faced when attempting to employ phytoextraction for clean-up of pluri-contaminated sites.     

Dietary intake of hexabromocyclododecane diastereoisomers (α-, β-, and γ-HBCD) in the Belgian adult population

A study was performed to assess exposure of the Belgian population to HBCD diastereoisomers. Measurements of HBCD were performed by UPLC-MS/MS, on 45 composite samples from 5 major food groups: dairy (products), meat (products), eggs, fish (products) and a group of “other” products. The medium bound estimated average daily intake (EDI) of ΣHBCD in the Belgian population was 0.99 ng kg⁻¹ bw d⁻¹. The diastereoisomer contribution to the mean EDI showed a predominance of γ-HBCD at 67%, followed by α-HBCD at 25% and 8% for β-HBCD. These results are consistent with the pattern found in the two food groups contributing the most to the EDI: meat (products) and the group of “other” products. Anyway, it has to be noted that diastereomeric distribution of HBCD can change due to bioisomerisation in biological material. Levels of HBCD diastereoisomers found in Belgian food samples of animal origin were low in comparison with those found in other EU countries and the resulting EDI was substantially below the proposed thresholds.     

Economic,ecological, and health aspects of β-diketonate application in the process of water purification

Environmental Science and Pollution Research - Water pollution is a constant challenge for humanity. Sustainable economic development and environmental protection through a green economy structure...     

FT-IR kinetic and product study of the Br-radical initiated oxidation of α, β-unsaturated organic carbonyl compounds

Using the relative kinetic technique the kinetics of the gas-phase reactions of Br radicals with acrolein, methacrolein and methylvinyl ketone have been investigated at (301±3) K in 1013 mbar of (N₂+O₂) bath gas at varying proportions. In 1013 mbar of synthetic air the following rate coefficients have been obtained (in units of cm³ molecule⁻¹ s⁻¹): acrolein (3.21±0.11)×10⁻¹²; methacrolein (2.33±0.08)×10⁻¹¹; methyl vinyl ketone (1.87±0.06)×10⁻¹¹. This study represents the first determination of the rate coefficients for these compounds. As for other unsaturated hydrocarbons the rate coefficient with Br was found to increase with increasing partial pressure of O₂. From the product studies of the reactions it has been established that addition of Br radicals to the terminal C-atom is the major pathway in all three cases. However, for acrolein H atom abstraction from the -CO–H group is also significant. Mechanisms are proposed to explain the observed products, mainly β-brominated carbonyl compounds.