Managing environmental impacts of energy development: Air quality in the Hunter Region,New South Wales,Australia

The Hunter Region in New South Wales, Australia, is undergoing rapid economic development based on its black coal resources. Cumulative impacts of new projects cannot be easily assessed with the traditional environmental impact statement. This article examines air quality impacts, and presents a systems analysis model to assist environmental management. The model consists of an input-output model of the regional economy and an air dispersion model. Results are obtained for sulfur oxides and fluorides.     

Palaeoecology: A tool to improve the management of Australian estuaries

Addressing environmental problems in estuaries is a worldwide problem. Establishing benchmarks and targets for management is critical, whether the aim is conservation, restoration or sustainable use. Palaeoecological techniques have rapidly improved during the past decade, particularly with advances in methods that allow high resolution quantitative assessments of environmental change. Palaeoecology is a useful tool in environmental management as it allows pre-impact conditions, the rate, extent, direction and cause of change, and range of natural variability to be determined. Australian estuarine ecosystems are qualitatively different from the often more well-studied estuaries in North America and Europe, which means site-specific studies of Australian estuaries are needed to inform management. While a potentially useful and valuable tool, palaeoecological techniques have not yet been widely adopted and practically implemented as part of estuarine management strategies and policy frameworks in Australia.     

Energy and CO2 from high performance recycled aggregate production

The use of recycled concrete aggregates (RCA) in applications other than road sub-layers is limited by two factors: the high porosity of RCA in comparison with natural aggregates, and the restrictions set forth in standards and building codes. Research efforts aimed at alleviating these restrictions are focused on improving the quality of coarse RCAs by reducing the amount of adhered cement pastes, which is the weakest element in this system and influences the rheological behaviour.This paper presents an analysis of the environmental impacts of the recent mechanical and thermo-mechanical processing techniques which produce high performance RCA by reducing the volume of adhered cement paste. Based on published data, processing scenarios were established. These scenarios permit making rough estimates of energy consumption, CO₂ emissions, fines generation and product quality. Using these data and the available emission factors from several countries, an objective comparison was made between these innovating processes and conventional recycling.The production of fines increases from 40% up to as much as 70% as the volume of adhered cement paste on the RCA is reduced. Fuel fed thermo-mechanical process energy consumption, per tonne of recycled aggregate, varies between 36 and 62 times higher than conventional recycling processes. Mechanical processing, combined with microwave heating, increases energy consumption from 3 to a little more than 4 times conventional recycling. Consequently, CO₂ emissions released by conventional coarse aggregate production go from 1.5 to 4.5 kgCO₂/t, to around 200 kgCO₂/t, for that of fossil fuel fed thermo-mechanical treatments.Mechanical and mechanical/microwave treatments appear to have the greatest environmental potential. Notwithstanding, the further development of markets for fines is crucial for reducing environmental loads.     

Assessment of environmental impacts part two: Data collection

Intervention analysis is a relatively new branch of time series analysis. The power of this technique, which gives the probability that changes in mean level can be distinguished from natural data variability, is quite sensitive to the way the data are collected. The principal independent variables influenced by the data collection design are overall sample size, sampling frequency, and the relative length of record before the occurrence of the event (intervention) that is postulated to have caused a change in mean process level.For three of the four models investigated, data should be collected so that the post-intervention record is substantially longer than the pre-intervention record. This is in conflict with the intuitive approach, which would be to collect equal amounts of data before and after the intervention. The threshold (minimum) level of change that can be detected is quite high unless sample sizes of at least 50 and preferably 100 are available; this minimum level is dependent on the complexity of the model required to describe the response of the process mean to the intervention. More complex models tend to require larger sample sizes for the same threshold detectable change level.Uniformity of sampling frequency is a key consideration. Environmental data collection programs have not historically been oriented toward data analysis using time series techniques, thus eliminating a potentially powerful tool from use in many environmental assessment applications.     

Landscape design,planning, and management: An approach to the analysis of vegetation

The process of analyzing vegetation in terms of its suitability for various non-consumptive uses is primitive in comparison with systems for evaluating other resources such as soil and topography. This paper proposes a framework for developing a standardized, quantitative vegetation analysis system based on plant ecology methods. A tentative scheme under study in Wisconsin is presented for discussion purposes.     

Evaluation of the california environmental quality act

The California Environmental Quality Act (CEQA) has evolved from a mini-NEPA, first enacted in 1970, into a procedural act that affects the approval process of all large developments in California. In 1990, California local governments produced over 1600 environmental impact reports and 30,000 initial studies under CEQA. Because of its widespread use, CEQA has periodically drawn the attention of the state legislature, most recently in 1993, when over 60 CEQA reform bills were introduced. This paper describes the CEQA process and evaluates its success at meeting its explicit and implicit goals. The research includes a statewide survey of CEQA practice, sent to the planning departments of all 513 local governments in California in 1991. Survey respondents agreed that CEQA helps in evaluating environmental impacts, reducing impacts, informing the public, and coordinating public agency review. It is effective in reducing the environmental impacts of individual projects, but is not as effective in improving environmental quality on an areawide scale. This research concludes that CEQA has led to positive outcomes and is not as deeply flawed as many of its critics claim. Still, CEQA as currently designed may not be the optimal vehicle for ensuring environmental quality.     

Determination of optimum minimum flow from a dam by using energy analysis

The proposed restoration of an abandoned hydroelectric dam on the Quinebaug River, Connecticut, is studied using energy analysis. The analysis considers the effects of alternative minimum flow releases, ranging from 0 to 34 cubic meters per second (cms), on the total energy flow of the affected system. The principal system components affected by differing minimum flows are hydroelectric power generation, aquatic habitat, and gross aquatic ecosystem productivity.The minimum flow alternative resulting in the highest annual energy flow in the affected system is considered optimal. From this purely analytical point of view, the optimum minimum flow is 0 cms, due to the short length and low productivity of the regulated reach, and the lack of floodplain interactions.Simulations of longer and more productive river reaches were conducted. For very short, unproductive reaches, in the absence of a floodplain, the contribution of aquatic community productivity to total system energy flow is negligible compared to hydroelectric generation. Optimum minimum flows are higher for longer and more productive reaches. For such cases the operation of hydroelectric dams could reduce total system energy flow because the energy supplied by hydroelectric generation may be offset by losses in aquatic productivity due to diminished riverine habitat.     

ISO 14 001 at the farm level: analysis of five methods for evaluating the environmental impact of agricultural practices

Faced with society's increasing expectations, the Common Agricultural Policy (CAP) review considers environmental management to be an ever more critical criterion in the allocation of farm subsidies. With the goal of evaluating the environmental friendliness of farm practices, France's agricultural research and extension services have built a range of agricultural/environmental diagnostic tools over recent years. The objective of the present paper is to compare the five tools most frequently used in France: IDEA, DIAGE, DIALECTE, DIALOGUE and INDIGO. All the tools have the same purpose: evaluation of the impact of farm practices on the environment via indicators and monitoring of farm management practices. When tested on a sample of large-scale farms in Picardie, the five tools sometimes produced completely different results: for a given farm, the most supposedly significant environmental impacts depend on the tool used. These results lead to differing environmental management plans and raise the question of the methods' pertinence. An analysis grid of diagnostic tools aimed at specifying their field of validity, limits and relevance was drawn up. The resulting comparative analysis enables to define each tool's domain of validity and allows to suggest lines of thought for developing more relevant tools for (i) evaluating a farm's environmental performance and (ii) helping farmers to develop a plan for improving practices within the framework of an environmental management system.     

Energy,exergy analysis,and sustainability assessment of different engine powers for helicopter engines

The rapid decrease of energy resources has accelerated studies on energy efficiency. Energy efficiency refers to the effective use of energy, in other words, completing a specific task to the required standard by using less energy. Exergy is an effective instrument to indicate the effective and sustainable use of energy in systems and processes. Transportation is an important part of human life. The studies on energy saving and the effective use of energy in different areas around the world have also increased for transportation systems and vehicles. With the more effective use of fuel, there will be potential benefits for the environment as well as a reduction in operating costs. This study includes energy and exergy analyses as well as a sustainability assessment by using C₈H₁₆ as a fuel at different engine powers (150–600 SHP (shaft horse power)), for the piston-prop helicopter engine. The maximum exergetic sustainability index was found at the power that provided the maximum energy and exergy efficiency. As a result of this index, the lowest waste exergy ratio, the lowest exergy destruction factor, and the lowest environmental impact factor were obtained. The highest exergy destruction and the highest exergy loss value were obtained at maximum power (600 SHP).     

Analyzing the Impacts of Dams on Riparian Ecosystems: A Review of Research Strategies and Their Relevance to the Snake River Through Hells Canyon

River damming provides a dominant human impact on river environments worldwide, and while local impacts of reservoir flooding are immediate, subsequent ecological impacts downstream can be extensive. In this article, we assess seven research strategies for analyzing the impacts of dams and river flow regulation on riparian ecosystems. These include spatial comparisons of (1) upstream versus downstream reaches, (2) progressive downstream patterns, or (3) the dammed river versus an adjacent free-flowing or differently regulated river(s). Temporal comparisons consider (4) pre- versus post-dam, or (5) sequential post-dam conditions. However, spatial comparisons are complicated by the fact that dams are not randomly located, and temporal comparisons are commonly limited by sparse historic information. As a result, comparative approaches are often correlative and vulnerable to confounding factors. To complement these analyses, (6) flow or sediment modifications can be implemented to test causal associations. Finally, (7) process-based modeling represents a predictive approach incorporating hydrogeomorphic processes and their biological consequences. In a case study of Hells Canyon, the upstream versus downstream comparison is confounded by a dramatic geomorphic transition. Comparison of the multiple reaches below the dams should be useful, and the comparison of Snake River with the adjacent free-flowing Salmon River may provide the strongest spatial comparison. A pre- versus post-dam comparison would provide the most direct study approach, but pre-dam information is limited to historic reports and archival photographs. We conclude that multiple study approaches are essential to provide confident interpretations of ecological impacts downstream from dams, and propose a comprehensive study for Hells Canyon that integrates multiple research strategies.     

Application of the Braun-Blanquet cover-abundance scale for vegetation analysis in land development studies

To document environmental impact predictions for land development, as required by United States government regulatory agencies, vegetation studies are conducted using a variety of methods. Density measurement (stem counts) is one method that is frequently used. However, density measurement of shrub and herbaceous vegetation is time-consuming and costly. As an alternative, the Braun-Blanquet cover-abundance scale was used to analyze vegetation in several ecological studies. Results from one of these studies show that the Braun-Blanquet method requires only one third to one fifth the field time required for the density method. Furthermore, cover-abundance ratings are better suited than density values to elucidate graphically species-environment relationships. For extensive surveys this method provides sufficiently accurate baseline data to allow environmental impact assessment as required by regulatory agencies.     

Water Quality in the Near Coastal Waters of the Gulf of Mexico Affected by Hurricane Katrina: Before and After the Storm

Water quality was assessed following Hurricane Katrina in the affected waters of Alabama, Mississippi, and Louisiana. Post-landfall water quality was compared to pre-hurricane conditions using indicators assessed by EPA’s National Coastal Assessment program and additional indicators of contaminants in water and pathogens. Water quality data collected after Hurricane Katrina suggest that the coastal waters affected by the storm exhibited higher salinity and concentrations of chlorophyll a, dissolved inorganic phosphorus, and total suspended solids following the storm compared to the previous 5-year averages. Higher bottom dissolved oxygen concentrations and light attenuation were also observed. Contaminant concentrations measured in the water column were very low or undetectable, as were the presence of pathogens. Overall water quality did not significantly differ from water quality assessed in the five years preceding the storm. Statistical analyses indicate that use of a probabilistic survey design is appropriate for making pre-storm and post storm comparisons for water quality condition on an areal basis. The information in this article has been funded wholly (or in part) by the U.S. Environmental Protection Agency. It has been subjected to review by the National Health and Environmental Effects Research Laboratory and approved for publication. Approval does not signify that the contents reflect the views of the Agency, nor does mention of trade names or commercial products constitute endorsement or recommendation for use. This is contribution number 1280 from the Gulf Ecology Division.     

Impingement losses of white perch at Hudson River power plants: Magnitude and biological significance

We performed a quantitative assessment of the impact of impingement at power plants on the Hudson River white perch population We estimated that impingement reduces the abundance of each white perch year class by at least 10% and probably by 15–20% or more after 2–3 years of vulnerability to power plants We attempted to detect effects of impingement on average year-class abundance of white perch from a time series of abundance indices derived from impingement data We found, however, that neither impingement collection rates observed at Hudson River power plants nor beach seine data provide a reliable index of year-class strength in white perch. Even if a reliable index were developed, natural fluctuations in year-class strength are great enough that a short-term monitoring program would be inadequate for detecting even a large reduction in average year-class strength. We performed a multipopulation analysis using simple food chain and food web models The results suggest that any long-term decline in white perch abundance caused by impingement should be accompanied by an increase in the abundance of one or more competing fish species and by an increase in the biomass of adult white perch relative to young-of-the-year.We conclude that 1) at present, assessments of population-level impact of impingement should focus on short-term effects, 2) research is needed to develop a reliable index of year-class strength for use in long-term monitoring programs, 3) identification and quantification of natural environmental factors influencing year-class strength are needed to improve our ability to predict and detect changes in abundance, and 4) it would be useful in designing monitoring programs to focus on detecting patterns of change among populations and age groups rather than solely on declines in abundance of individual populationsResearch sponsored by the Office of Nuclear Regulatory Research, US Nuclear Regulatory Commission under Interagency Agreement No. 40-550-75 with the US Department of Energy under Contract W-7405-eng-26 with Union Carbide Corporation. Publication No. 2030, Environmental Sciences Division, ORNL.     

Integrating Environmental Restoration and Ecological Restoration: Long-Term Stewardship at the Department of Energy

With the ending of the Cold War, several federal agencies are reclaiming land through remediation and restoration and are considering potential future land uses that are compatible with current uses and local needs. Some sites are sufficiently contaminated that it is likely that the responsible federal agency will retain control over the land for the foreseeable future, providing them with a stewardship mission. This is particularly true of some of the larger Department of Energy (DOE) facilities contaminated during the production of nuclear weapons. The use of the term “restoration” is explored in this paper because the word means different things to the public, ecologists, and environmental managers responsible for contaminated sites, such as Superfund sites and the DOE facilities. While environmental restoration usually refers to remediation and removal of hazardous wastes, ecological restoration refers to the broader process of repairing damaged ecosystems and enhancing their productivity and/or biodiversity. The goals of the two types of restoration can be melded by considering environmental restoration as a special case of ecological restoration, one that involves risk reduction from hazardous wastes, and by broadening environmental restoration to include a more extensive problem-formulation phase (both temporal and spatial), which includes the goal of reestablishing a functioning ecosystem after remediation. Further, evaluating options for the desired post remediation result will inform managers and policy-makers concerning the feasibility and efficacy of environmental restoration itself.     

Energy and environment in the European Union: An indicator-based analysis

The European Environment Agency (EEA) is the European Union body dedicated to providing sound, independent information on the environment. It is a major information source for those involved in developing, adopting, implementing and evaluating environmental policy in Europe, and also for the general public. In line with its mandate, the EEA has developed — focused around a set of policy relevant questions — a set of indicators to assess progress in Europe in integrating environmental considerations into the energy sector. Each question is answered through one or more indicators describing the development of the sector in Europe, implications for the environment and links to policy actions. The indicators cover not only the current situation, but also trends and prospects and, most importantly, point to the conditions for change that are needed for progress towards a more sustainable energy policy that benefits the environment. The results of the most recent assessment are presented in this article and show that in many areas of environmental integration there have been some successes, but overall progress to date has been insufficient. Substantial additional action will therefore be required in the future if the European Union is going to move towards a more environmentally sustainable energy system.     

An Assessment of Stakeholder Perceptions and Management of Noxious Alien Plants in Spain

Despite biological invasions being a worldwide phenomenon causing significant ecological, economic, and human welfare impacts, there is limited understanding regarding how environmental managers perceive the problem and subsequently manage alien species. Spanish environmental managers were surveyed using questionnaires to (1) analyze the extent to which they perceive plant invasions as a problem; (2) identify the status, occurrence, and impacts of noxious alien plant species; (3) assess current effort and expenditure targeting alien plant management; and, finally, (4) identify the criteria they use to set priorities for management. In comparison to other environmental concerns, plant invasions are perceived as only moderately problematic and mechanical control is the most valued and frequently used strategy to cope with plant invasions in Spain. Based on 70 questionnaires received, 193 species are considered noxious, 109 of which have been the subject of management activities. More than 90% of species are found in at least one protected area. According to respondents, the most frequently managed species are the most widespread across administrative regions and the ones perceived as causing the highest impacts. The perception of impact seems to be independent of their invasion status, since only half of the species identified as noxious are believed to be invasive in Spain, while 43% of species thought to only be casual aliens are causing a high impact. Records of management costs are poor and the few data indicate that the total actual expenditure amounted to 50,492,437 € in the last decade. The majority of respondents stated that management measures are insufficient to control alien plants due to limited economic resources, lack of public awareness and support, and an absence of coordination among different public administrations. Managers also expressed their concern about the fact that much scientific research is concerned with the ecology of alien plants rather than with specific cost-efficient strategies to manage alien species.