Spatial assessment of the economic feasibility of short rotation coppice on radioactively contaminated land in Belarus, Ukraine, and Russia. II. Monte Carlo analysis

A Monte Carlo analysis of two sequential GIS-embedded submodels, which evaluate the economic feasibility of short rotation coppice (SRC) production and energy conversion in areas contaminated by Chernobyl-derived (137)Cs, was performed to allow for variability of environmental conditions that was not contained in the spatial model inputs. The results from this analysis were compared to the results from the deterministic model presented in part I of this paper. It was concluded that, although the variability in the model results due to within-gridcell variability of the model inputs was considerable, the prediction of the areas where SRC and energy conversion is potentially profitable was robust. If the additional variability in the model input that is not contained in the input maps is also taken into account, the SRC production and energy conversion appears to be potentially profitable at more locations for both the small scale and large scale production scenarios than the model predicted using the deterministic model.     

Radiocaesium accumulation in stemwood: integrated approach at the scale of forest stands for contaminated Scots pine in Belarus

Twenty years after the Chernobyl accident, root uptake from the surface layers of contaminated forest soils plays a major role in radiocaesium ((137)Cs) transfer to the trees and accumulation in perennial compartments, including stemwood. Trustworthy long-term predictions (modelling) of stemwood contamination with (137)Cs should accordingly be based on a reliable picture of this source-sink relationship. Considering the complexity of the processes involved in (137)Cs cycling in forest stands, elementary ratios like transfer factors (TF) were shown to be not very relevant for that purpose. At the tree level, alternatives like the wood immobilisation potential (WIP) have therefore been proposed in order to quantify the current net (137)Cs accumulation in stemwood. Our objective was here to compare WIP values determined for a series of contaminated forest stands in Belarus with the corresponding pools of (137)Cs available in the soil for root uptake. The comparison reveals that both indices are quite proportional, whatever the forest ecosystem features. This corroborates the relevancy of WIP as an indicator of the current (137)Cs root uptake by the trees, which could accordingly help to improve the existing models of (137)Cs cycling and the long-term management of contaminated forest ecosystems.     

微生物对石油污染物的降解作用

针对油井附近落地油污染地表土壤的问题,利用热蒸发色谱技术,对油污土壤中加入微生物对原油的降解特征进行了实验研究。实验结果表明,在油污土壤中加入微生物,对落地油有明显的降解作用,可以减轻石油生产过程中油污对土壤的破坏和对环境的污染。随着微生物降解作用的不断进行,土壤中污油的相对降解速度逐渐加快,相对降解率逐渐增加。生物处理法的过程较简单,处理费用低,处理效果好,一般不会产生二次污染。     

Kriging method evaluation for assessing the spatial distribution of urban soil lead contamination

Describing contaminant spatial distribution is an integral component of risk assessment. Application of geostatistical techniques for this purpose has been demonstrated previously. These techniques may provide both an estimate of the concentration at a given unsampled location, as well as the probability that the concentration at that location will exceed a critical threshold concentration. This research is a comparative study between multiple indicator kriging and kriging with the cumulative distribution function of order statistics, with both local and global variograms. The aim was to determine which of the four methods is best able to delineate between "contaminated" and "clean" soil. The four methods were validated with a subset of data values that were not used in the prediction. Method performance was assessed by calculating the root mean square error (RMSE), analysis of variance, the proportion of sites misclassified by each method as either "clean" when they were actually "contaminated" or vice versa, and the expected loss for each misclassification type. The data used for the comparison were 807 topsoil Pb concentrations from the inner-Sydney suburbs of Glebe and Camperdown, Australia. While there was very little difference between the four methods, multiple indicator kriging was found to produce the most accurate predictions for delineating "clean" from "contaminated" soil.     

Assessment of contamination from arsenical pesticide use on orchards in the Great Valley region, Virginia and West Virginia, USA

Lead arsenate pesticides were widely used in apple orchards from 1925 to 1955. Soils from historic orchards in four counties in Virginia and West Virginia contained elevated concentrations of As and Pb, consistent with an arsenical pesticide source. Arsenic concentrations in approximately 50% of the orchard site soils and approximately 1% of reference site soils exceed the USEPA Preliminary Remediation Goal (PRG) screening guideline of 22 mg kg(-1) for As in residential soil, defined on the basis of combined chronic exposure risk. Approximately 5% of orchard site soils exceed the USEPA PRG for Pb of 400 mg kg(-1) in residential soil; no reference site soils sampled exceed this value. A variety of statistical methods were used to characterize the occurrence, distribution, and dispersion of arsenical pesticide residues in soils, stream sediments, and ground waters relative to landscape features and likely background conditions. Concentrations of Zn, Pb, and Cu were most strongly associated with high developed land density and population density, whereas elevated concentrations of As were weakly correlated with high orchard density, consistent with a pesticide residue source. Arsenic concentrations in ground water wells in the region are generally <0.005 mg L(-1). There was no spatial association between As concentrations in ground water and proximity to orchards. Arsenic had limited mobility into ground water from surface soils contaminated with arsenical pesticide residues at concentrations typically found in orchards.     

Biogas production from slaughterhouse wastewaters and use of biofertilizer obtained for biodegradation of aromatic hydrocarbons

The anaerobic digestion of industrial wastes produces a biogas that is an alternative to the use of fossil fuels for energy production. At the end of this process, the stabilized biomass presents high levels of nutrients, which can be used both as biofertilizers in agriculture and for the biodegradation of contaminants in the soil through improvement of the microbiota. Thus, this study aimed to evaluate biogas production by industrial wastes and to use the biofertilizer for the bioremediation of soils previously contaminated with gasoline. The biomass (420 mL) generated approximately 10 liters (L) of methane and 3 L of other gases. Anaerobic incubation reduced total and volatile solids, as well as biochemical oxygen demand, chemical oxygen demand, and the carbon and nitrogen contents of the biomass. The bioremediation experiment showed that 15 days after contamination with gasoline, the addition of the biofertilizer improved the degradation efficiency of monoaromatic hydrocarbons; however, the degradation of polyaromatic hydrocarbons was less time efficient. So, we conclude that the anaerobic incubation of industrial wastes generates a high amount of biogas, and that biofertilizer deposition into contaminated soil does not affect the efficiency of the degradation of aromatic hydrocarbons after 30 days. Novelty or significance : Anaerobic incubation of industrial wastes generates a high calorific value gas, which can be used as an alternative source of energy. And, the resulting biomass, called biofertilizer, can be used to remediate soils contaminated with hydrocarbons.     

Comparative Life Cycle Assessment of Lignocellulosic Ethanol Production: Biochemical Versus Thermochemical Conversion

Lignocellulosic biomass can be converted into ethanol through either biochemical or thermochemical conversion processes. Biochemical conversion involves hydrolysis and fermentation while thermochemical conversion involves gasification and catalytic synthesis. Even though these routes produce comparable amounts of ethanol and have similar energy efficiency at the plant level, little is known about their relative environmental performance from a life cycle perspective. Especially, the indirect impacts, i.e. emissions and resource consumption associated with the production of various process inputs, are largely neglected in previous studies. This article compiles material and energy flow data from process simulation models to develop life cycle inventory and compares the fossil fuel consumption, greenhouse gas emissions, and water consumption of both biomass-to-ethanol production processes. The results are presented in terms of contributions from feedstock, direct, indirect, and co-product credits for four representative biomass feedstocks i.e., wood chips, corn stover, waste paper, and wheat straw. To explore the potentials of the two conversion pathways, different technological scenarios are modeled, including current, 2012 and 2020 technology targets, as well as different production/co-production configurations. The modeling results suggest that biochemical conversion has slightly better performance on greenhouse gas emission and fossil fuel consumption, but that thermochemical conversion has significantly less direct, indirect, and life cycle water consumption. Also, if the thermochemical plant operates as a biorefinery with mixed alcohol co-products separated for chemicals, it has the potential to achieve better performance than biochemical pathway across all environmental impact categories considered due to higher co-product credits associated with chemicals being displaced. The results from this work serve as a starting point for developing full life cycle assessment model that facilitates effective decision-making regarding lignocellulosic ethanol production.     

Managing Radioactively Contaminated Land: Implications for Habitat Diversity

Radioactive contamination of agricultural land may necessitate long-term changes in food production systems, through application of selected countermeasures, in order to reduce the accumulation of radionuclides in food. We quantified the impact of selected countermeasures on habitat diversity, using the hypothetical case of two agricultural areas in Finland. The management scenarios studied were conversions from grassland to cereal production and from grassland and crop production to afforestation. The two study sites differed with respect to present agricultural production: one being predominantly cereal production and seminatural grasslands, while the other was dominated by intensive grass and dairy production. Some of the management scenarios are expected to affect landscape structures and habitat diversity. These potential changes were assessed using a spatial pattern analysis program in connection with geographic information systems. The studied landscape changes resulted in a more monotonous landscape structure compared to the present management, by increasing the mean habitat patch size, reducing the total habitat edge length and reducing the overall habitat diversity calculated by the Shannon diversity index. The degree of change was dependent on the present agricultural management practice in the case study sites. Where dairy production was predominant, the landscape structure changes were mostly due to conversion of intensive pastures and grasslands to cereal production. In the area dominated by cereal production and seminatural grasslands, the greatest predicted impacts resulted from afforestation of meadows and pastures. The studied management changes are predicted to reduce biodiversity at the species level as well as diminishing species-rich habitats. This study has predicted prominent side effects in habitat diversity resulting from application of management scenarios. These potential long-term impacts should be considered by decision-makers when planning future strategies in the event of radionuclide deposition.     

Assessment of the coherence of the Swiss waste wood management

Waste wood recovery by thermal treatment with energy recovery or by recycling allows the substitution and conservation of primary resources. Swiss government notes the potential presence of tensions between policies which simultaneously encourage the cascade use of wood, the recycling or the energy recovery by thermal treatment of waste wood. The aim of the present research is to assess the coherence of waste wood management in Switzerland by a quantitative and qualitative approach. First, a material flow analysis allows to model the wood resources and waste wood metabolism over one century. The simulation results of various scenarios of waste wood management establish that the additional impacts of the immediate thermal treatment are less significant for the reduction of CO₂eq emissions but more significant for the energy production than its cascade treatments on Swiss territory. Secondly, a documentary analysis examines the determinants of the current waste wood treatments prevailing in Switzerland. Thus, the causes of the strong presence on Swiss territory of the sector of thermal treatment, the export of almost half of waste wood generated and the sub-exploitation of Swiss forest act as barriers or drivers that result in introducing a crowding-out effect where no amount of waste wood is available for recycling in Switzerland. The comparison of the results of the two approaches leads to the conclusion that the current waste wood management is coherent in relation to the various goals of the Swiss federal policies but the waste wood potential for energy production is not fully exploited. The recommendations on the waste wood management and the possibilities to use the model for other case studies are given in the conclusion.     

Prediction of radionuclide aging in soils from the Chernobyl and Mediterranean areas

The aging of soil-pollutant interaction, which may lead to an increase in pollutant fixation, is the main driving force in the natural attenuation of contaminated soils. Here a test was evaluated to predict the aging of radiostrontium and radiocesium in soils from the Chernobyl and Mediterranean areas. After contamination, soils were maintained at various temperatures for up to 12 mo, with or without drying-wetting (DW) cycles. Changes in the quantity of radionuclide reversibly sorbed over time were monitored using an extraction test (1 mol L(-1) NH(4)Cl; 10 mL g(-1); 16 h). The fixed fraction could not be predicted from soil properties controlling the sorption step. Aging was not as relevant for Sr as for Cs. The time elapsed since contamination was the main factor responsible for the slight (up to 1.3-fold) decreases in Sr extraction yields. The additional effect of DW cycles was negligible. Instead, all factors accelerated Cs aging due to the enhancement of Cs trapping by clay interlayer collapse, with up to 20-fold increases in Cs fixation. The DW cycles also caused secondary effects on the Cs-specific sorption pool, which were beneficial or detrimental depending on the soil type. Extraction yields from laboratory aged samples agreed with those from field samples taken a few years after the Chernobyl accident. These results confirm the prediction capacity of the laboratory test and its usefulness in risk assessment exercises and in the design of intervention actions, particularly because neither fixation nor aging were related to the soil properties, such as clay content.     

Producing biogas from agricultural residues generated during phytoremediation process: Possibility,threshold, and challenges

In the past decades, a novel strategy has arisen, as required by time, to get a rational production of biogas from contaminated biomass, which may be, on purpose, harvested from contaminated soil phytoremediation process. The present review focuses on the possibility and potential of utilizing the agricultural residues generated during phytoremediation for production of biogas. As a general result of the studies compiled in this review, the harvested biomass can subsequently be utilized for the winning of biogas, and it provides a solution of waste disposal for phytoremediation technology. According to the analysis of previous results, not more than 1 mg/L of cadmium in fermenters shows promoting or at least no inhibitory effect on cumulative biogas yields. This strategy is promising for dealing with both environmental and energy problems in spite of many challenges in the coming future.     

Energy planning and wood balances

Woodfuel balances are commonly used by energy planners in developing countries to determine the adequacy of woodfuel resources. Recently, critics have argued that wood balances are misleading in their simplicity, exaggerating both the severity of the woodfuel shortage and the need for planned interventions to solve that problem. This paper examines four different wood balances developed for Tanzania. While the four studies all indicate that areas with miombo woodlands are in the greatest wood surplus, the specific estimates for any given region may differ widely. Despite their shortcomings, energy planners need woodfuel balances to give an impression of the adequacy of woodfuel resources. However, if energy planning is to have any effect, these balances must represent the beginning, and not the end result, of the planning process. Planners must follow the wood-energy balance analysis with work utilizing local people to solve local problems.     

Potential risks of copper, zinc, and cadmium pollution due to pig manure application in a soil-rice system under intensive farming: a case study of Nanhu, China

Heavy metal (copper [Cu], zinc [Zn], and cadmium [Cd]) pollution of soils from pig manures in soil-rice ( L.) systems under intensive farming was investigated, taking Nanhu, China, as the case study area. Two hundred pig manures and 154 rice straws, brown rice samples, and corresponding surface soil (0-15 cm) samples were collected in paddy fields from 150 farms in 16 major villages within the study area. The mean Cu and Zn concentrations in pig manures consistently exceeded the related standard. About 44 and 60% of soil samples exceed the Chinese Soil Cu and Cd Environmental Quality Standards, respectively. The concentration of Cu, Zn, and Cd in brown rice did not exceed the Chinese Food Hygiene Standard. There was a significant positive correlation between total Cu and Zn contents in soil and application rate of pig manures. Strong correlation was observed between the extractable Cu, Zn, and Cd in soil and the Cu, Zn, and Cd contents in the brown rice. The spatial distribution maps of Cu and Zn concentrations in brown rice, straw, and extractable soil Cu and Zn concentration also showed similar geographical trends. Further analyses on heavy metals loading flux and accumulation rates from pig manure applied suggested that Cu and Cd contents in soil currently have already exceeded the maximum permissible limit, and Zn, if still at current manure application rates, will reach the ceiling concentration limits in 9 yr. This study assists in understanding the risk of heavy metals accumulating from pig manure applications to agricultural soils.     

Decision making under uncertainty in case of soil remediation

Decisions on soil remediation are one of the most difficult management issues of municipal and state agencies. The assessment of contamination is uncertain, the costs of remediation are high, and the impacts on the environment are multiple. This paper presents a general, transparent, and consistent method for decision making among the remediation alternatives. Soil washing, phytoremediation, and no remediation are exemplarily considered. Multi-criteria utility functions including (a) the cost of remediation (b) the impact on human health and agricultural productivity, and (c) the economic gain after remediation are constructed using probability density functions representing contamination for all site coordinates. Herewith, the probability of different types of (i) correct decisions such as a hit or a true rejection and (ii) erroneous decisions such as a false alarm or miss are examined. The decision theoretic model is applied to a case study on heavy metal contaminated soil. This case study reveals the non-linear structure of multi-criteria-decision making. The case study shows that the geostatistical uncertainties of the log-normal distributed soil contamination must be taken into account: When uncertainties are not considered and the utilities are assessed according to the estimated value for a spatial unit, only few (N=26) spatial units result where the utility score of the alternative soil washing are higher than the utility score to the no remediation alternative. However, when taking into account geostatistical uncertainties of the log-normal soil distribution this number is about ten times greater (N=237). Furthermore, the use of 'maximizing expected utility' as decision rule is critical in that it may lead to a high probability of misses.     

Moving dirt: soil,lead, and the dynamic spatial politics of urban gardening

Urban gardens are often heralded as places for building social, physical, and environmental health. Yet they are also sites of significant conflict based on competing political, economic, and ecological projects. These projects range from radical re-envisionings of liberatory urban spaces, reformist aesthetic and sanitary improvement programmes, to underwriting the production of the neo-liberal city. These projects are based on divergent visions of the garden ground itself, in particular, whether this is soil (the fertile and living source for growing food and social values) or dirt (an inert and even problematic substrate to be removed or built upon for development purposes). These are not fixed or mutually exclusive categories, but are unstable as soil/dirt moves in discursive and material ways over time and space. Contaminants such as lead in the soil contribute to this instability, reframing fertile soil as dangerous dirt. To understand this discursive and material movement of soil/dirt over time and space, a dynamic spatial politics framework is needed that encompasses three scalar concepts: location, duration, and interconnection. This paper applies this dynamic spatial politics framework to interpret the 30-year conflict over the fate of an urban garden in Sacramento, California, that began as a countercultural space and was eventually transformed into a manicured amenity for a gentrifying neighbourhood, and the role of soil lead contamination in this narrative.     

Exploring changes in Ecuadorian land use for food production and their effects on natural resources

A model is used for the dynamic and spatially explicit exploration of near future agricultural land-use changes. In a case study for Ecuador, different plausible scenarios are formulated, taking into account possible developments in national food demand until the year 2010. The protection of nature parks and restrictions due to land degradation are evaluated with respect to their possible spatial impacts on the land-use change dynamics within the country. Under the assumptions of the demand scenarios, agricultural land-use expands significantly, resulting in more use of land in existing agricultural areas and frontier-type expansion into relatively undisturbed natural areas. The patterns of change depend on the increase in demand, competition between land-use types, changes in driving factors of land use, and the area and characteristics of land that is excluded from agricultural use. The modelled land-use dynamics are related to their possible impacts on the natural resource base, specifically soil fertility. The results indicate potential negative effects of land-use changes on the soil nutrient balance and biodiversity. It is argued that spatial and temporal quantification of land-use dynamics at the landscape level can support research and policies aimed at understanding the driving factors of land-use change and the behaviour of complex agro-ecosystems under changing conditions at different scales. In this way, issues dealing with sustainable food production and the management of the natural resource base can be addressed in a more integrated and quantitative manner.     

Using rank-order geostatistics for spatial interpolation of highly skewed data in a heavy-metal contaminated site

The spatial distribution of a pollutant in contaminated soils is usually highly skewed. As a result, the sample variogram often differs considerably from its regional counterpart and the geostatistical interpolation is hindered. In this study, rank-order geostatistics with standardized rank transformation was used for the spatial interpolation of pollutants with a highly skewed distribution in contaminated soils when commonly used nonlinear methods, such as logarithmic and normal-scored transformations, are not suitable. A real data set of soil Cd concentrations with great variation and high skewness in a contaminated site of Taiwan was used for illustration. The spatial dependence of ranks transformed from Cd concentrations was identified and kriging estimation was readily performed in the standardized-rank space. The estimated standardized rank was back-transformed into the concentration space using the middle point model within a standardized-rank interval of the empirical distribution function (EDF). The spatial distribution of Cd concentrations was then obtained. The probability of Cd concentration being higher than a given cutoff value also can be estimated by using the estimated distribution of standardized ranks. The contour maps of Cd concentrations and the probabilities of Cd concentrations being higher than the cutoff value can be simultaneously used for delineation of hazardous areas of contaminated soils.     

Phytoremediation and long-term site management of soil contaminated with pentachlorophenol (PCP) and heavy metals

Pentachlorophenol (PCP) is a persistent organic pollutant (POP) previously used as a timber treatment chemical to prevent sap stain and wood rot. Commonly used in wood treatment industries for the last 50 years, there are now many sites worldwide that are contaminated with PCP. Although persistent, PCP is a mobile contaminant and therefore has a propensity to leach and contaminate surrounding environments. Both willow (Salix sp., 'Tangoio') and poplar (Populus sp. 'Kawa') growing in an open-ended plastic greenhouse were found to tolerate soil PCP concentrations of 250 mg kg(-1) or less and both species stimulated a significant increase in soil microbial activity when compared to unplanted controls. Both poplar and willow could not survive PCP concentrations above 250 mg kg(-1) in soil. Pentachlorophenol degradation occurred in both planted and unplanted pots, but a higher rate of degradation was observed in the planted pots. Soil contaminated by wood-treatment activities often contains co-contaminants such as B, Cr, Cu and As, that are also used as timber preservatives. An additional column leaching experiment, done along side the potted trial, found that PCP, B, Cr, Cu and As were all present in the column leachate. This indicates that although Cu, Cr and As are generally considered immobile in the soil, they were mobilised under our column conditions. If a contaminated site were to be hydraulically 'sealed' using plants, a reticulation irrigation system should be installed to capture any contaminant leachate resulting from heavy rains. This captured leachate can either be independently treated, or reapplied to the site. Our data demonstrate a reduction in soil hydraulic conductivity with repeated application of leachate containing PCP and metal compounds but the soil did not become anaerobic. This would need to be considered in site remediation design.     

Bioremediation of soils contaminated with explosives

The large-scale industrial production and processing of munitions such as 2,4,6-trinitrotoluene (TNT) over the past 100 years led to the disposal of wastes containing explosives and nitrated organic by-products into the environment. In the US, the Army alone has estimated that over 1.2 million tons of soil have been contaminated with explosives, and the impact of explosives contamination in other countries is of similar magnitude. In recent years, growing concern about the health and ecological threats posed by man-made chemicals have led to studies of the toxicology of explosives, which have identified toxic and mutagenic effects of the common military explosives and their transformation products (Bruns-Nagel et al., 1999a; Fuchs et al., 2001; Homma-Takeda et al., 2002; Honeycutt et al., 1996; Rosenblatt et al., 1991; Spanggord et al., 1982; Tan et al., 1992 and Won et al., 1976). Because the cleanup of areas contaminated by explosives is now mandated because of public health concerns, considerable effort has been invested in finding economical remediation technologies. Biological treatment processes are often considered, since these are usually the least expensive means of destroying organic pollution. This review examines the most important groups of chemicals that must be treated at sites contaminated by explosives processing, the chemical and biological transformations they undergo, and commercial processes developed to exploit these transformations for treatment of contaminated soil. We critically examine about 150 papers on the topic, including approximately 60 published within the past 5 years.     

Arsenic availability from chromated copper arsenate (CCA)-treated wood

Lumber used to construct raised garden beds is often treated with chromated copper arsenate (CCA). This project aimed to determine (i) how far As, Cu, and Cr had diffused away from CCA-treated wood surfaces in raised garden beds under realistic conditions, (ii) the uptake of these elements by crops, and (iii) the effect of CCA solution on soil bacteria. This study showed that As, Cu, and Cr diffuse into soil from CCA-treated wood used to construct raised garden beds. To determine crop uptake of these elements, contaminated soil 0 to 2 cm from the treated wood was obtained from two different beds (40-50 mg kg(-1) As); control soil was collected 1.5 m away from the treated wood (<3-10 mg kg(-1) As). Four replicates of carrot (Daucus carota var. sativus Hoffm. cv. Thumbelina), spinach (Spinacia oleracea L. cv. Indian Summer), bush bean (Phaseolus vulgaris L. cv. Provider), and buckwheat (Fagopyrum esculentum Moench cv. Common) were grown in pots containing these soils in a greenhouse. After harvest, plant materials were dried, ground, digested, and analyzed for As by inductively coupled plasma-hydride generation (ICP-HG). Concentrations of As in all crops grown in contaminated soils were higher than those from control soils. The levels of As in the crops remained well below the recommended limit for As set by the United States Public Health Service (2.6 mg kg(-1) fresh wt.). To determine if bacteria in soils 0 to 2 cm from the treated wood had higher resistance to Type C chromated copper arsenate (CCA-C) solution than those from reference soils, dilution plates were set up using quarter-strength tryptic soy agar (TSA) media and 0 to 22.94 g L(-1) (0-1.25% v/v) CCA-C working solution. The microorganisms from soils adjacent to treated wood had greater growth on the CCA-amended media than those from reference soils outside the bed.