Aerosol transmission,an indispensable route of COVID-19 spread: case study of a department-store cluster

• Aerosol transmission is an indispensable route of COVID-19 spread. • Different outbreak sites have different epidemiologic feature. • SRAS-CoV-2 can exist for a long time in aerosol. • SRAS-CoV-2 RNA can be detected in aerosol in diverse places. • Some environmental factors can impact SARS-CoV-2 transportation in aerosol. Patients with COVID-19 have revealed a massive outbreak around the world, leading to widespread concerns in global scope. Figuring out the transmission route of COVID-19 is necessary to control further spread. We analyzed the data of 43 patients in Baodi Department Store (China) to supplement the transmission route and epidemiological characteristics of COVID-19 in a cluster outbreak. Incubation median was estimated to endure 5.95 days (2–13 days). Almost 76.3% of patients sought medical attention immediately upon illness onset. The median period of illness onset to hospitalization and confirmation were 3.96 days (0–14) and 5.58 days (1–21), respectively. Patients with different cluster case could demonstrate unique epidemiological characteristics due to the particularity of outbreak sites. SRAS-CoV-2 can be released into the surrounding air through patient’s respiratory tract activities, and can exist for a long time for long-distance transportation. SRAS-CoV-2 RNA can be detected in aerosol in different sites, including isolation ward, general ward, outdoor, toilet, hallway, and crowded public area. Environmental factors influencing were analyzed and indicated that the SARS-CoV-2 transportation in aerosol was dependent on temperature, air humidity, ventilation rate and inactivating chemicals (ozone) content. As for the infection route of case numbers 2 to 6, 10, 13, 16, 17, 18, 20 and 23, we believe that aerosol transmission played a significant role in analyzing their exposure history and environmental conditions in Baodi Department Store. Aerosol transmission could occur in some cluster cases when the environmental factors are suitable, and it is an indispensable route of COVID-19 spread.     

Aerosol exposure assessment during reclaimed water utilization in China and risk evaluation in case of Legionella

• The Chinese population exposure habits were surveyed. • The risks of three scenarios of reclaimed water utilization were evaluated by QMRA. • The risks were markedly higher than the threshold (10⁻⁴ pppy) recommended by WHO. • The risks were age-, educational background-, region- and gender-specific. Reclaimed water utilization provides an effective way to alleviate water shortage. However, the residual pathogens in the recycled water like Legionella, could be spread into the air as aerosols through water-to-air transmission process. Inhaling the aerosols by the people nearby increases their susceptibility to diseases. For estimating the health risks associated with the potential exposure of airborne Legionella emitted from the urban use of reclaimed water in China, nationwide questionnaire was designed to investigate the exposure habits of Chinese population in different scenarios. Quantitative microbial risk assessment (QMRA) served as the suitable explanatory tool to estimate the risk. The results indicated that annual infection probability of populations exposed to Legionella for three scenarios, 0.0764 (95% CI: 0.0032–0.6880) for road cleaning, 1.0000 (95% CI: 0.1883–1.0000) for greenfield irrigation, 0.9981 (95% CI: 0.0784–1.0000) for landscape fountain, were markedly higher than the threshold recommended by WHO (10⁻⁴ per person per year (pppy)) according to the concentration distribution of Legionella in the reclaimed water. An age-, educational background-, region- and gender-specific data in annual infection probability also showed different tendencies for some subpopulations. This study provides some detailed information on the health risks from the water reuse in China and will be useful to promote the safe application of reclaimed water in water-deficient areas.     

Less attention paid to waterborne SARS-CoV-2 spreading in Beijing urban communities

• A survey on individual’s perception of SARS-CoV-2 transmission was conducted. • Waterborne transmission risks are far less perceived by individuals. • Precautions of preventing wastewater mediated transmission are implemented. • The precautions for wastewater transmission are less favored by the public. • Education level differs the most regarding to waterborne transmission perception. SARS-CoV-2 has been detected in various environmental media. Community and individual-engaged precautions are recommended to stop or slow environmentally-mediated transmission. To better understand the individual’s awareness of and precaution to environmental dissemination of SARS-CoV-2, an online survey was conducted in Beijing during March 14–25, 2020. It is found that the waterborne (especially wastewater mediated) spreading routes are far less perceived by urban communities. The precautions for wastewater transmission are less favored by the public than airborne and solid waste mediated spreading routes. Such risk communication asymmetry in waterborne transmission will be further enlarged in places with fragile water system. Furthermore, education level is the most significant attribution (Sig.<0.05) that causes the difference of awareness and precautions of the waterborne transmission among the respondents, according to the variance analysis results. Our survey results emphasize the urgent need for evidence-based, multifactorial precautions for current and future outbreaks of COVID-19.     

Secondary aerosol formation in winter haze over the Beijing-Tianjin-Hebei Region,China

• Characteristics and interannual variation of aerosol pollution are illustrated. • Mechanisms of secondary aerosol formation in winter haze of North China are reviewed. • Directions in future studies of secondary aerosol formation are provided. Severe haze pollution occurs frequently in the winter over the Beijing-Tianjin-Hebei (BTH) region (China), exerting profound impacts on air quality, visibility, and human health. The Chinese Government has taken strict mitigation actions since 2013 and has achieved a significant reduction in the annual mean PM_2.5 concentration over this region. However, the level of secondary aerosols during heavy haze episodes showed little decrease during this period. During heavy haze episodes, the concentrations of secondary aerosol components, including sulfate, nitrate and secondary organics, in aerosol particles increase sharply, acting as the main contributors to aerosol pollution. To achieve effective control of particle pollution in the BTH region, the precise and complete secondary aerosol formation mechanisms have been investigated, and advances have been made about the mechanisms of gas phase reaction, nucleation and heterogeneous reactions in forming secondary aerosols. This paper reviews the research progress in aerosol chemistry during haze pollution episodes in the BTH region, lays out the challenges in haze formation studies, and provides implications and directions for future research.     

Bioaerosolization behavior along sewage sludge biostabilization

• Aerosolization behavior during a lab-scale sludge biostabilization was determined. • Many pathogenic species were identified to be preferentially aerosolized. • Bioaerosol concentration along the biostabilization ranged from 160 to 1440 cell/m³. • Sludge aerosolization behavior was different with that of other biowaste. Biostabilization is a cost-effective method for the beneficial utilization of sewage sludge. However, during the operation of sludge biostabilization, some microbial species could be released into the atmospheric environment from the solid-phase of sludge easily and present a high risk to human health. This study aimed to evaluate the risk of bioaerosol during sludge biostabilization. We found a total of nine bacterial phyla, one archaeal phylum, and two fungal phyla in the bioaerosol samples. Among them, Proteobacteria, Actinobacteria, Bacteroidetes, and Ascomycota were the dominant phyla. In addition, the bioaerosolization indexes (BI) of prokaryotic phyla and fungal phyla ranged 0–45 and 0–487, respectively. Massilia, Pseudarthrobacter, Pseudomonas, Tremellales spp., and Fusarium were the preferentially aerosolized microbial genera with maximum bioaerosolization indexes of 19962, 10360, 1802, 3055, and 7398. The bioaerosol concentration during the biostabilization ranged from 160 to 1440 cell/m³, and we identified species such as Stenotrophomonas rhizophila and Fusarium graminerum with high bioaerosolization indexes that could be threats to human health. Euryachaeota, which belongs to archaeal phyla, had the highest biostabilization index in our study. We also found that Pseudarthrobacter was the easiest to aerosolize during the sludge biostabilization process.     

PM2.5 over North China based on MODIS AOD and effect of meteorological elements during 2003‒2015

• The Taihang Mountains was the boundary between high and low pollution areas. • There were one high value center for PM_2.5 pollution and two low value centers. • In 2004, 2009 and after 2013, PM_2.5 concentration was relatively low. Over the past 40 years, PM_2.5 pollution in North China has become increasingly serious and progressively exposes the densely populated areas to pollutants. However, due to limited ground data, it is challenging to estimate accurate PM_2.5 exposure levels, further making it unfavorable for the prediction and prevention of PM_2.5 pollutions. This paper therefore uses the mixed effect model to estimate daily PM_2.5 concentrations of North China between 2003 and 2015 with ground observation data and MODIS AOD satellite data. The tempo-spatial characteristics of PM_2.5 and the influence of meteorological elements on PM_2.5 is discussed with EOF and canonical correlation analysis respectively. Results show that overall R² is 0.36 and the root mean squared predicted error was 30.1 μg/m³ for the model prediction. Our time series analysis showed that, the Taihang Mountains acted as a boundary between the high and low pollution areas in North China; while the northern part of Henan Province, the southern part of Hebei Province and the western part of Shandong Province were the most polluted areas. Although, in 2004, 2009 and dates after 2013, PM_2.5 concentrations were relatively low. Meteorological/topography conditions, that include high surface humidity of area in the range of 34°‒40°N and 119°‒124°E, relatively low boundary layer heights, and southerly and easterly winds from the east and north area were common factors attributed to haze in the most polluted area. Overall, the spatial distribution of increasingly concentrated PM_2.5 pollution in North China are consistent with the local emission level, unfavorable meteorological conditions and topographic changes.     

Unlocked disinfection by-product formation potential upon exposure of swimming pool water to additional stimulants

• Swimming pool water was studied for DBPs upon exposure to additional stimulants. • DBP formation could be induced by residual chlorine and extended incubation. • Urine led to a massive formation of chloroform with additional stimulants. • Reactions between chlorine and anthropogenic organics were slow and long-lasting. • Urine control and air ventilation should be on the priority list for pool management. Anthropogenic organics are known to be responsible for the formation of harmful disinfection by-products (DBPs) in swimming pool water (SPW). The research explored an important scenario of SPW with no additional anthropogenic organic input. With stimulations by residual chlorine or additional chlorine and extended incubation, the formation of DBPs, especially chloroform, was significantly induced. Similar observations were found by investigating synthetic SPW made with sweat and urine. The presence of urine led to a massive formation of chloroform, as noted by an approximate 19-fold increase after 165-day incubation with a shock chlorine dose. The research suggests that consistent residual chlorine and long water retention as two typical features of SPW could unlock the DBP formation potential of anthropogenic organics. Thus, limiting the introduction of anthropogenic organics may not have an immediate effect on reducing DBP levels, because their reactions with chlorine can be slow and long-lasting. Pool management should prioritize on control of urine and improving air ventilation. This work is useful to deepen understandings about DBP formation in SPW and provide implications for pool management and prospective legislation.     

Characterization and seasonal distribution of microplastics in the nearshore sediments of the south-east coast of India,Bay of Bengal

• MPs in the coastal sediment of south-east coast of India are quantified. • High MPs are recorded near river mouths and nearshore regions. • Polyethylene and polypropylene are the major polymers observed. • MPs contamination is higher than the values reported elsewhere. In view of increasing Microplastics (MPs) contamination in the marine environment and dearth of baseline data, a study was conducted on the abundance, characterization, and seasonal distribution of MPs in the nearshore sediments of the south-east coast of India. Sediment samples (n = 130) were collected at a distance of 1 km and 10 km from the shore region at varying depths (8–45 m) along the Chennai to Puducherry coast (165 km stretch), representing two seasons, i.e., south-west (July 2019 and July 2020) and north-east (January 2020) monsoons. The average abundance of MPs at the 22 offshore sites along the Chennai to Puducherry coast varied from 9±4.3 to 19±12.9 particles/50 g dry weight, in July 2019 and January 2020, respectively. July 2020 had an average abundance of 10±4.5 particles/50 g dry weight. Spatially, high levels of MPs were found at 1km stations and transects in proximity to the river inlets, and temporally, the north-east month recorded the maximum concentration. The dominant morphotype was the filament, and the major polymers were polyethylene and polypropylene. Scanning Electron Microscope (SEM) images revealed the surface irregularity and degradation of MPs due to weathering. The study highlights that high sediment contamination by MPs occurs during heavy rainfall and accumulates closer to river inlets. Eventually, this study suggests that appropriate management of plastic wastes on the landside will reduce MP contamination in the marine environment.     

Characterising populations living close to intensive farming and composting facilities in England

• Bioaerosol emitted from farming and composting facilities may pose health risks. • We describe population characteristics around these sites and infer public concern. • Sites were mapped and overlaid with population, demographic and school data. • Approximately 16% of the population and 15% of schools are located near these sites. • More community health studies need to be conducted around these sites. Bioaerosol exposure has been linked to adverse respiratory conditions. Intensive farming and composting facilities are important anthropogenic sources of bioaerosols. We aimed to characterise populations living close to intensive farming and composting facilities. We also infer whether the public are becoming more concerned about anthropogenic bioaerosol emissions, using reports of air pollution related incidents attributed to facilities. We mapped the location of 1,257 intensive farming and 310 composting facilities in England in relation to the resident population and its characteristics (sex and age), area characteristics (deprivation proxy and rural/urban classification) and school locations stratified by pre-defined distance bands from these bioaerosol sources. We also calculated the average number of air pollution related incidents per year per facility. We found that more than 16% of the population and 15% of schools are located within 4,828 m of an intensive farming facility or 4,000 m of a composting facility; few people (0.01%) live very close to these sites and tend to be older people. Close to composting facilities, populations are more likely to be urban and more deprived. The number of incidents were attributed to a small proportion of facilities; population characteristics around these facilities were similar. Results indicate that populations living near composting facilities (particularly>250 to≤4,000 m) are mostly located in urban areas (80%–88% of the population), which supports the need for more community health studies to be conducted. Results could also be used to inform risk management strategies at facilities with higher numbers of incidents.     

Toward better understanding vacuum ultraviolet–iodide induced photolysis via hydrogen peroxide formation,iodine species change,and difluoroacetic acid degradation

• UV/VUV/I^– induces substantial H₂O₂ and IO₃^– formation, but UV/I^– does not. • Increasing DO level in water enhances H₂O₂ and iodate productions. • Increasing pH decreases H₂O₂ and iodate formation and also photo-oxidation. • The redox potentials of UV/VUV/I^– and UV/VUV changes with pH changes. • The treatability of the UV/VUV/I^– process was stronger than UV/VUV at pH 11.0. Recently, a photochemical process induced by ultraviolet (UV), vacuum UV (VUV), and iodide (I^–) has gained attention for its robust potential for contaminant degradation. However, the mechanisms behind this process remain unclear because both oxidizing and reducing reactants are likely generated. To better understand this process, this study examined the evolutions of hydrogen peroxide (H₂O₂) and iodine species (i.e., iodide, iodate, and triiodide) during the UV/VUV/I^– process under varying pH and dissolved oxygen (DO) conditions. Results show that increasing DO in water enhanced H₂O₂ and iodate production, suggesting that high DO favors the formation of oxidizing species. In contrast, increasing pH (from 6.0 to 11.0) resulted in lower H₂O₂ and iodate formation, indicating that there was a decrease of oxidative capacity for the UV/VUV/I^– process. In addition, difluoroacetic acid (DFAA) was used as an exemplar contaminant to verify above observations. Although its degradation kinetics did not follow a constant trend as pH increases, the relative importance of mineralization appeared declining, suggesting that there was a redox transition from an oxidizing environment to a reducing environment as pH rises. The treatability of the UV/VUV/I^– process was stronger than UV/VUV under pH of 11.0, while UV/VUV process presented a better performance at pH lower than 11.0.     

Assessment of future climate change impacts on water-heat-salt migration in unsaturated frozen soil using CoupModel

• A model coupling water-heat-salt of unsaturated frozen soil was established. • Future temperature, precipitation, and evaporation increase in freeze–thaw period. • Soil water, heat, and salt transport are closely coupled during freeze–thaw period. • Freeze–thaw cycles and future climate change can exacerbate salinization. The transport mechanisms of water, heat, and salt in unsaturated frozen soil, as well as its response to future climate change are in urgent need of study. In this study, western Jilin Province in north-eastern China was studied to produce a model of coupled water-heat-salt in unsaturated frozen soil using CoupModel. The water, heat, and salt dynamics of unsaturated frozen soil under three representative concentration pathway (RCP) scenarios were simulated to analyze the effects of future climate change on unsaturated frozen soil. The results show that water, heat, and salt migration are tightly coupled, and the soil salt concentration in the surface layer (10 cm) exhibits explosive growth after freezing and thawing. The future (2020–2099) meteorological factors in the study area were predicted using the Statistical Downscaling Model (SDSM). For RCP2.6, RCP4.5, and RCP8.5 scenarios, future temperatures during the freeze–thaw period increased by 2.68°C, 3.18°C, and 4.28°C, respectively; precipitation increased by 30.28 mm, 28.41 mm, and 32.17 mm, respectively; and evaporation increased by 93.57 mm, 106.95 mm, and 130.57 mm, respectively. Climate change will shorten the freeze–thaw period, advance the soil melting time from April to March, and enhance water and salt transport. Compared to the baseline period (1961–2005), future soil salt concentrations at 10 cm increased by 1547.54 mg/L, 1762.86 mg/L, and 1713.66 mg/L under RCP2.6, RCP4.5, and RCP8.5, respectively. The explosive salt accumulation is more obvious. Effective measures should be taken to prevent the salinization of unsaturated frozen soils and address climate change.     

Enhanced triallyl isocyanurate (TAIC) degradation through application of an O3/UV process: Performance optimization and degradation pathways

• UV/O₃ process had higher TAIC mineralization rate than O₃ process. • Four possible degradation pathways were proposed during TAIC degradation. • pH impacted oxidation processes with pH of 9 achieving maximum efficiency. • CO₃^2– negatively impacted TAIC degradation while HCO₃^– not. • Cl^– can be radicals scavenger only at high concentration (over 500 mg/L Cl^–). Triallyl isocyanurate (TAIC, C₁₂H₁₅N₃O₃) has featured in wastewater treatment as a refractory organic compound due to the significant production capability and negative environmental impact. TAIC degradation was enhanced when an ozone(O₃)/ultraviolet(UV) process was applied compared with the application of an independent O₃ process. Although 99% of TAIC could be degraded in 5 min during both processes, the O₃/UV process had a 70%mineralization rate that was much higher than that of the independent O₃ process (9%) in 30 min. Four possible degradation pathways were proposed based on the organic compounds of intermediate products identified during TAIC degradation through the application of independent O₃ and O₃/UV processes. pH impacted both the direct and indirect oxidation processes. Acidic and alkaline conditions preferred direct and indirect reactions respectively, with a pH of 9 achieving maximum Total Organic Carbon (TOC) removal. Both CO₃^2– and HCO₃^– decreased TOC removal, however only CO₃^2– negatively impacted TAIC degradation. Effects of Cl^– as a radical scavenger became more marked only at high concentrations (over 500 mg/L Cl^–). Particulate and suspended matter could hinder the transmission of ultraviolet light and reduce the production of HO· accordingly.     

Distribution,characteristics and daily fluctuations of microplastics throughout wastewater treatment plants with mixed domestic–industrial influents in Wuxi City,China

• MPs were analyzed throughout three WWTPs with mixed domestic–industrial influents. • White polyethylene granules from plastic manufacturing were the most dominant MPs. • MPs abundance in random grab-sampling was lower than that in daily dense sampling. • The production of MPs such as microbeads need to be restricted from the source. In wastewater treatment plants (WWTPs), microplastics (MPs) are complex, especially with mixed domestic–industrial influents. Conventional random grab sampling can roughly depict the distribution and characteristics of MPs but can not accurately reflect their daily fluctuations. In this study, the concentration, shape, polymer type, size, and color of MPs were analyzed by micro-Raman spectroscopy (detection limit of 0.05 mm) throughout treatment stages of three mixed domestic–industrial WWTPs (W1, W2, and W3) in Wuxi City, China, and the daily fluctuations of MPs were also obtained by dense grab sampling within 24 h. For influent samples, the average MP concentration of 392.2 items/L in W1 with 10% industrial wastewater was much higher than those in W2 (71.2 items/L with 10% industrial wastewater) and W3 (38.3 items/L with 60% industrial wastewater). White polyethylene granules with a diameter less than 0.5 mm from plastic manufacturing were the most dominant MPs in the influent of W1, proving the key role of industrial sources in MPs pollution. In addition, the daily dense sampling results showed that MP concentration in W1 influent fluctuated widely between 29.1 items/L and 4617.6 items/L within a day. Finally, few MPs (less than 4.0 items/L) in these WWTPs effluents were attributed to the effective removal of wastewater treatment processes. Thus, further attention should be paid to regulating the primary sources of MPs.     

Characterization of value-added chemicals derived from the thermal hydrolysis and wet oxidation of sewage sludge

• Hydrothermal treatment can greatly improve resource recovery from sewage sludge. • tCOD removal during WO was ~55% compared with ~23% after TH. • TOC solubilization during hydrothermal treatment followed first-order kinetics. • Solids and carbon balance confirmed loss of organics during thermal hydrolysis. • Reaction pathways for thermal hydrolysis and wet oxidation are proposed. We evaluated the effect of hydrothermal pretreatments, i.e., thermal hydrolysis (TH) and wet oxidation (WO) on sewage sludge to promote resource recovery. The hydrothermal processes were performed under mild temperature conditions (140°C–180°C) in a high pressure reactor. The reaction in acidic environment (pH= 3.3) suppressed the formation of the color imparting undesirable Maillard’s compounds. The oxidative conditions resulted in higher volatile suspended solids (VSS) reduction (~90%) and chemical oxygen demand (COD) removal (~55%) whereas TH caused VSS and COD removals of ~65% and ~27%, respectively at a temperature of 180°C. During TH, the concentrations of carbohydrates and proteins in treated sludge were 400–1000 mg/L and 1500–2500 mg/L, respectively. Whereas, WO resulted in solids solubilization followed by oxidative degradation of organics into smaller molecular weight carboxylic acids such as acetic acid (~400–500 mg/L). Based on sludge transformation products generated during the hydrothermal pretreatments, simplified reaction pathways are predicted. Finally, the application of macromolecules (such as proteins), VFAs and nutrients present in the treated sludge are also discussed. The future study should focus on the development of economic recovery methods for various value-added compounds.     

Significant increase of assimilable organic carbon (AOC) levels in MBR effluents followed by coagulation,ozonation and combined treatments: Implications for biostability control of reclaimed water

• Annual AOCs in MBR effluents were stable with small increase in warmer seasons. • Significant increase in AOC levels of tertiary effluents were observed. • Coagulation in prior to ozonation can reduce AOC formation in tertiary treatment. • ∆UV₂₅₄ and SUVA can be surrogates to predict the AOC changes during ozonation. As water reuse development has increased, biological stability issues associated with reclaimed water have gained attention. This study evaluated assimilable organic carbon (AOC) in effluents from a full-scale membrane biological reactor (MBR) plant and found that they were generally stable over one year (125–216 µg/L), with slight increases in warmer seasons. After additional tertiary treatments, the largest increases in absolute and specific AOCs were detected during ozonation, followed by coagulation-ozonation and coagulation. Moreover, UV₂₅₄ absorbance is known to be an effective surrogate to predict the AOC changes during ozonation. Applying coagulation prior to ozonation of MBR effluents for removal of large molecules was found to reduce the AOC formation compared with ozonation treatment alone. Finally, the results revealed that attention should be paid to seasonal variations in influent and organic fraction changes during treatment to enable sustainable water reuse.     

Using hydrochemical signatures to characterize the long-period evolution of groundwater information in the Dagu River Basin,China

• The long-period groundwater evolution was identified by hydrochemical signatures. • The dominant processes in the groundwater evolution were verified. • Groundwater quality in the coastal areas was susceptible to deterioration due to SI. • Groundwater contamination arose from fertilizer, livestock manure & domestic sewage. The evolution of hydrochemical compositions influenced by long-period interactions between groundwater and the geo-environment is a fundamental issue for exploring groundwater quality and vulnerability. This study systematically investigated the hydrochemical processes and anthropogenic interference occurring in the river basin by bivariate plots, Gibbs diagrams, saturation index, and the major ions ratios. Apparent changes in groundwater hydrochemistry have been observed in the study area, illustrating the origins of major ions are affected by various internal and external factors. Results highlighted that TDS varied from freshwater to brackish water, ranging between 187.90 and 2294.81 mg/L. Ca²⁺ and HCO₃⁻ are the dominant ions in the studied samples. The results gained by Gibbs diagrams, bivariate plots, saturation index, and the major ions ratios demonstrated that minerals dissolution/precipitation, cation exchange, and human inputs play crucial roles in the unconfined aquifers. Moreover, the overuse of nitrogen fertilizer, livestock manure, and industrial/domestic sewage led to nitrate and nitrite contamination and brought significant challenges to the surrounding hydrogeo-environment. The present study could make an unambiguous identification of natural processes and anthropogenic interventions influencing groundwater hydrochemistry’s long-period evolution and create a preliminary strategy for groundwater resources management.     

New insights into different surfactants’ impacts on sludge fermentation: Focusing on the particular metabolic processes and microbial genetic traits

• The promoting effects for VFA generation follow the order of APG>SDBS>HTAB. • Surfactants improve the WAS solubilization/hydrolysis and acidification processes. • The VFA promotion is associated with surfactants’ distinctive characteristics. • Surfactants induce the enrichment of functional bacteria for VFA biosynthesis. • The vital genes for substrates delivery, metabolism, and VFA yields are upregulated. Surfactants were expected to exhibit positive effects on the waste activated sludge (WAS) disposal. However, the systematic comparison of different categories of surfactants on the WAS fermentation and the functional mechanisms, especially microbial metabolic traits, have not yet been precisely explored. This study revealed the positive effects of different surfactants on the volatile fatty acid (VFA) production, which followed the order of alkyl polysaccharides (APG)>sodium dodecylbenzene sulfonate (SDBS)>hexadecyl trimethyl ammonium bromide (HTAB). Mechanistic exploration found that the presence of different surfactants improved solubilization and hydrolysis steps, and then contributed to the subsequent acidification with different efficiencies. The functional microorganisms associated with VFA generation were enriched in surfactant-conditioned reactors. Metagenomic analysis further indicated that the key genes involved in the particular process of VFA generation were over-expressed. The simultaneous bioavailable substrate improvement, functional bacterial enrichment, and metabolic activity upregulation induced by different surfactants jointly contributed to VFA promotion during WAS fermentation. This study could provide a comprehensive realization of surfactants’ impacts on the WAS fermentation process, and more importantly, it reminded the public to discern the distinct interplaying effects induced by different chemicals in regulating the WAS disposal and resource recovery.     

Bioinspired and biomimetic membranes for water purification and chemical separation: A review

•The history of biological and artificial water channels is reviewed. •A comprehensive channel characterization platform is introduced. •Rationale designs and fabrications of biomimetic membranes are summarized. •The advantages, limitations, and challenges of biomimetic membranes are discussed. •The prospect and scalable solutions of biomimetic membranes are discussed. Bioinspired and biomimetic membranes that contain biological transport channels or attain their structural designs from biological systems have been through a remarkable development over the last two decades. They take advantage of the exceptional transport properties of those channels, thus possess both high permeability and selectivity, and have emerged as a promising solution to existing membranes. Since the discovery of biological water channel proteins aquaporins (AQPs), extensive efforts have been made to utilize them to make separation membranes–AQP-based membranes, which have been commercialized. The exploration of AQPs’ unique structures and transport properties has resulted in the evolution of biomimetic separation materials from protein-based to artificial channel-based membranes. However, large-scale, defect-free biomimetic membranes are not available yet. This paper reviews the state-of-the-art biomimetic membranes and summarizes the latest research progress, platform, and methodology. Then it critically discusses the potential routes of this emerging area toward scalable applications. We conclude that an appropriate combination of bioinspired concepts and molecular engineering with mature polymer industry may lead to scalable polymeric membranes with intrinsic selective channels, which will gain the merit of both desired selectivity and scalability.     

Sorption mechanisms of diphenylarsinic acid on natural magnetite and siderite: Evidence from sorption kinetics,sequential extraction and extended X-ray absorption fine-structure spectroscopy analysis

• DPAA sorption followed pseudo-secondary and intra-particle diffusion models. • Chemical bonding and intra-particle diffusion were dominant rate-limiting steps. • DPAA simultaneously formed inner- and outer-sphere complexes on siderite. • DPAA predominantly formed occluded inner-sphere complexes on magnetite. • Bidentate binuclear bond was identified for DPAA on siderite and magnetite. Diphenylarsinic acid (DPAA) is both the prime starting material and major metabolite of chemical weapons (CWs). Because of its toxicity and the widespread distribution of abandoned CWs in burial site, DPAA sorption by natural Fe minerals is of considerable interest. Here we report the first study on DPAA sorption by natural magnetite and siderite using macroscopic sorption kinetics, sequential extraction procedure (SEP) and microscopic extended X-ray absorption fine-structure spectroscopy (EXAFS). Our results show that the sorption pseudo-equilibrated in 60 minutes and that close to 50% and 20%–30% removal can be achieved for magnetite and siderite, respectively, at the initial DPAA concentrations of 4–100 mg/L. DPAA sorption followed pseudo-secondary and intra-particle diffusion kinetics models, and the whole process was mainly governed by intra-particle diffusion and chemical bonding. SEP and EXAFS results revealed that DPAA mainly formed inner-sphere complexes on magnetite (>80%), while on siderite it simultaneously resulted in outer-sphere and inner-sphere complexes. EXAFS analysis further confirmed the formation of inner-sphere bidentate binuclear corner-sharing complexes (²C) for DPAA. Comparison of these results with previous studies suggests that phenyl groups are likely to impact the sorption capacity and structure of DPAA by increasing steric hindrance or affecting the way the central arsenic (As) atom maintains charge balance. These results improve our knowledge of DPAA interactions with Fe minerals, which will help to develop remediation technology and predict the fate of DPAA in soil-water environments.     

Characterization of bacterial communities during persistent fog and haze events in the Qingdao coastal region

• Light haze had little effect on bacterial communities. • Fog and heavy haze had significant effects on these communities. • Air pollution exerted a greater influence than particle size on bacterial community. Here, we report the characteristics of bacterial communities in aerosols with different particle sizes during two persistent fog and haze events in December of 2015 and 2016 in Qingdao, China. In the early stage of pollution, the accumulation of PM_2.5 led to the accumulation of microorganisms, thus increasing the bacterial richness and diversity of fine particle sizes. With the persistence and aggravation of pollution, the toxic effect was strengthened, and the bacterial richness and diversity of each particle size decreased. When the particle concentration was highest, the richness and diversity were low for each particle size. Light haze had little influence on bacterial communities. The occurrence of highly polluted humid weather and heavy haze resulted in significant changes in bacterial community diversity, composition and structure, and air pollution exerted a greater influence than particle size on bacterial community structure. During persistent fog and haze events, with the increase of pollutants, bacteria associated with each particle size may be extensively involved in aerosol chemistry, but the degree of participation varies, which requires further study.