基于GIS的数字化水文过程模拟研究

在传统水文模型中，一般只能通过降水、蒸发、下渗、气温的输入模拟流量的变化，流域下垫面因素对径流的影响在径流模型中视为“灰箱”。地理信息系统技术的引入。把地面空间特性数字化。利用地形图。土壤分布图、土地利用图、土湿等资料模拟下垫面的地质地貌，把河道、流域的土壤植被等地理因素数字化应用到产汇流理论中。“灰箱”变为“白箱”。为流域研究提供了一种新的思维方法。     

STORM RUNOFF PREDICTION BASED ON A SPATIALLY DISTRIBUTED TRAVEL TIME METHOD UTILIZING REMOTE SENSING AND GIS1

ABSTRACT: In this study, remotely sensed data and geographic information system (GIS) tools were used to estimate storm runoff response for Simms Creek watershed in the Etonia basin in northeast Florida. Land cover information from digital orthophoto quarter quadrangles (DOQQ), and enhanced thematic mapper plus (ETM+) were analyzed for the years 1990, 1995, and 2000. The corresponding infiltration excess runoff response of the study area was estimated using the U.S. Department of Agriculture (USDA), Natural Resources Conservation Service Curve Number (NRCS‐CN) method. A digital elevation model (DEM)/GIS technique was developed to predict stream response to runoff events based on the travel time from each grid cell to the watershed outlet. A comparison of predicted to observed stream response shows that the model predicts the total runoff volume with an efficiency of 0.98, the peak flow rate at an efficiency of 0.85, and the full direct runoff hydrograph with an average efficiency of 0.65. The DEM/GIS travel time model can be used to predict the runoff response of ungaged watersheds and is useful for predicting runoff hydrographs resulting from proposed large scale changes in the land use.     

Sensitivity of SCS Models to Curve Number Variation1

ABSTRACT: The Soil Conservation Service (SCS) models, including the TR-20 computer program and the simplified methods in TR-55, are widely used in hydrologic design. The runoff curve number (CN), which is an important input parameter to SCS models, is defined in terms of land use tretments, hydrologic, condition, antecedent soil moisture, and soil type. The objective of this study was to evaluate the sensitivity of the SCS models to errors in CN estimates. The results show that the effects of CN variation decrease as the design rainfall depth increases, such as for the larger storm events. The value and use of the sensitivity curves are demonstrated using a comparison of Landsat and conventionally derived curve numbers for three watersheds in Pennsylvania.     

SUSCEPTIBILITY OF INDIANA WATERSHEDS TO HERBICIDE CONTAMINATION1

ABSTRACT: An index of watershed susceptibility to surface water contamination by herbicides could be used to improve source water assessments for public drinking water supplies, prioritize watershed restoration projects, and direct funding and educational efforts to areas where the greatest environmental benefit can be realized. The goal of this study is to use streamflow and herbicide concentration data to develop and evaluate a method for estimating comparative watershed susceptibility to herbicide loss. United States Geological Survey (USGS) concentration data for five relatively water soluble herbicides (alachlor, atrazine, cyanazine, metolachlor, and simazine) were analyzed for 16 Indiana watersheds. Correlation was assessed between observed herbicide losses and: (1) a herbicide runoff index using GIS‐based land use, soil type, SCS runoff curve number, tillage practice, herbicide use estimates, and combinations of these factors; and (2) predicted herbicide losses from a non‐point source pollution model (NAPRA‐Web, an Internet‐based interface for GLEAMS). The highest adjusted R²value was found between herbicide concentration and the runoff curve number alone, ranging from 0.25 to 0.56. Predictions from the simulation model showed a poorer correlation with observed herbicide loss. This indicates potential for using the runoff curve number as a simple herbicide contamination susceptibility index.     

HYDROLOGY OF A SMALL IMPOUNDMENT AND WATERSHED IN CENTRAL OKLAHOMA1

ABSTRACT: West Bitter Creek floodwater retarding structure site 3 in South Central Oklahoma was instrumented and records obtained and analyzed to obtain information concerning an impoundment water budget that is useful to landowners and designers of these impoundments. On-site loss of water from the impoundment was only 17 percent of the inflow during three years when the annual precipitation averaged 26 inches and the annual inflow averaged 1.4 inches. Runoff from an eroded area with no farm ponds was about 70 percent greater per unit area than from a portion of the watershed where 71 percent of the drainage area was controlled by farm ponds. A previous study indicated, however, that the ponds were reducing runoff only 13 percent. Loss of top soil increases runoff considerably. Only 24 percent of the total runoff into the impoundment was base flow. The flow rate into the impoundment was less than 0.05 cfs 70 percent of the time, and the inflow rate exceeded 10 cfs only 1 percent of the time. SCS runoff curve numbers varied between 57 and 96 for the impoundment watershed with an inverse relation between precipitation amount and curve number apprently caused by partial area runoff from impervious and semi-impervious areas. A comparison of measured event runoff versus event runoff computed by the SCS curve numbers gave an r² of only 0.44. However, the total computed surface runoff for eight years of record was less than 1 percent below the measured runoff which indicated the curve number method was a good tool for predicting long term runoff for the watershed.     

ESTIMATING NONPOINT SOURCE POLLUTION LOADS WITH A GIS SCREENING MODEL1

ABSTRACT: The St. Johns River Water Management District (SJR-WMD) is using a Geographic Information System (GIS) screening model to estimate annual nonpoint source pollution loads to surface waters and determine nonpoint source pollution problem areas within the SJRWMD. The model is a significant improvement over current practice because it is contained entirely within the district's GIS software, resulting in greater flexibility and efficiency, and useful visualization capabilities. Model inputs consist of five spatial data layers, runoff coefficients, mean runoff concentrations, and stormwater treatment efficiencies. The spatial data layers are: existing land use, future land use, soils, rainfall, and hydrologic boundaries. These data layers are processed using the analytical capabilities of a cell-based GIS. Model output consists of seven spatial data layers: runoff, total nitrogen, total phosphorous, suspended solids, biochemical oxygen demand, lead, and zinc. Model output can be examined visually or summarized numerically by drainage basin. Results are reported for only one of the SJRWMD's ten major drainage basins, the lower St. Johns River basin. The model was created to serve a major planning effort at the SJRWMD; results are being actively used to address nonpoint source pollution problems.     

Use of a geographic information system for storm runoff prediction from small urban watersheds

The use of computer-assisted map analysis techniques for prediction of storm runoff from a small urban watershed in the United States is investigated. An automated procedure for calculating input parameters for the US Soil Conservation Service (SCS) method of predicting storm runoff volume and peak timing is presented. Advanced techniques of spatial analysis are used to characterize spatial coincidence, surface configuration and effective hydrologic distance. A limited verification of the automated procedure indicates that the model reasonably characterizes water flow. A sensitivity analysis of basin disaggregation suggests that the SCS method yields increased volume and peak discharge predictions as the watershed is divided into smaller and smaller subunits. As a means to demonstrate the practical application of the automated procedure, a simulation of the effects on surface runoff for a potential residential development is presented.     

THE APPLICATION OF HYDROLOGIC MODELS TO SMALL WATERSHEDS HAVING MILD TOPOGRAPHY1

ABSTRACT: The application of hydrologic models to small watersheds of mild topography is not well documented. This study evaluates the applicability of hydrologic models described by Huggins and the Soil Conservation Service to small watersheds by comparing the simulated and actual hydrograph for both gaged and ungaged situations. The annual maximum rainfall events plus storms exceeding 2.5 inches from 25 years of rainfall and runoff data for two small watersheds were selected for the model evaluations. These storms had a variety of patterns and occurred on many different watershed conditions. Simulated and actual hydrographs were compared using a parameter which contained volume, peak, and shape factors. One-half of the selected storms were used to calibrate the models. For both models, there were no significant differences between the simulated and actual runoff volumes and peak runoff rates. Parameters obtained during the calibration process and relationships developed to estimate antecedent moisture and to modify tabulated runoff curve numbers were used to simulate the runoff hydrograph from the remaining storms. These remaining storms or test storms were simulated only once in order to imitate an ungaged situation. In general, both the Huggins and SCS model performed similarly on the test storms, but the level of model performance was lower than that for the calibration storms. For both models, the two-day antecedent rainfall was more important than the five-day in determining antecedent moisture and modifying tabulated curve numbers. The time of concentration which resulted in good hydrograph simulations was about three times larger than that estimated using published empirical relationships.     

GEOMORPHIC PARAMETERS PREDICT HYDROGRAPH CHARACTERISTICS IN THE SOUTHWEST1

ABSTRACT: Critical design characteristics of ephermal runoff such as hydrograph rise time, duration, mean peak discharge, volume, peak-volume ratio, and maximum flood were related to physical basin parameters such as area, shape, slope, drainage density, basin relief, stream length, and combinations of these in intermontane watersheds representative of the Mexican Highland section of the Basin and Range Province. Parameters used were restricted to those easily obtainable from maps or aerial photographs. A parameter expressing basin shape and size was developed which proved to be as accurate a predictor as others used in existing prediction equations tested and was simpler and faster to derive. Simple prediction equations derived for hydrograph characteristics were all significant except for volume at the 5% level; three were significant at the 1% level. Relationships determined are applicable in semi-arid basins of the Southwest up to 60 square miles (155 km²) in area.     

STORMFLOW SIMULATION USING A GEOGRAPHICAL INFORMATION SYSTEM WITH A DISTRIBUTED APPROACH1

ABSTRACT: With the increasing availability of digital and remotely sensed data such as land use, soil texture, and digital elevation models (DEMs), geographic information systems (GIS) have become an indispensable tool in preprocessing data sets for watershed hydrologic modeling and post processing simulation results. However, model inputs and outputs must be transferred between the model and the GIS. These transfers can be greatly simplified by incorporating the model itself into the GIS environment. To this end, a simple hydrologic model, which incorporates the curve number method of rainfall‐runoff partitioning, the ground‐water base‐flow routine, and the Muskingum flow routing procedure, was implemented on the GIS. The model interfaces directly with stream network, flow direction, and watershed boundary data generated using standard GIS terrain analysis tools; and while the model is running, various data layers may be viewed at each time step using the full display capabilities. The terrain analysis tools were first used to delineate the drainage basins and stream networks for the Susquehanna River. Then the model was used to simulate the hydrologic response of the Upper West Branch of the Susquehanna to two different storms. The simulated streamflow hydrographs compare well with the observed hydrographs at the basin outlet.     

MODELING NORTH CASCADES ANNUAL RUNOFF DISTRIBUTION USING DRAINAGE BASIN ELEVATION DISTRIBUTION1

ABSTRACT: The annual distribution of flow in a drainage basin within a given region is a function of many factors. These may include annual distribution of rainfall, basin orientation, ground cover, or presence of glaciers. Since the North Cascades region of northern Washington State has little variation in precipitation distribution by month, and the region has significant snowpack, one would predict that in an unregulated basin, basin elevation would be one of the most important factors impacting an annual hydrograph distribution. Such a prediction can be made since the higher a drainage basin is, the larger the portion of runoff that would occur as late spring snowmelt. Given that there is a relationship between elevation distribution and annual hydrograph, the problem becomes one of how to use this relationship to model an ungaged basin's hydrograph. This study concludes that, within the North Cascades region and perhaps within other regions, an effective method of determining annual flow distribution is to model ungaged flows in the same manner as flows from a gaged basin with an elevation distribution similar to that of the subject basin.     

ALAWAT: A spatially allocated watershed model for approximating stream,sediment, and pollutant flows in Hawaii,USA

The Ala Wai Canal Watershed Model (ALAWAT) is a planning-level watershed model for approximating direct runoff, streamflow, sediment loads, and loads for up to five pollutants. ALAWAT uses raster GIS data layers including land use, SCS soil hydrologic groups, annual rainfall, and subwatershed delineations as direct model parameter inputs and can use daily total rainfall from up to ten rain gauges and streamflow from up to ten stream gauges. ALAWAT uses a daily time step and can simulate flows for up to ten-year periods and for up to 50 subwatersheds. Pollutant loads are approximated using a user-defined combination of rating curve relationships, mean event concentrations, and loading/washoff parameters for specific subwatersheds, land uses, and times of year. Using ALAWAT, annual average streamflow and baseflow relationships and urban suspended sediment loads were approximated for the Ala Wai Canal watershed (about 10,400 acres) on the island of Oahu, Hawaii. Annual average urban suspended sediments were approximated using two methods: mean event concentrations and pollutant loading and washoff. Parameters for the pollutant loading and washoff method were then modified to simulate the effect of various street sweeping intervals on sediment loads.     

A PLANNING METHOD FOR EVALUATING DOWNSTREAM EFFECTS OF DETENTION BASINS1

While storm water detention basins are widely used for controlling increases in peak discharges that result from urbanization, recent research has indicated that under certain circumstances detention storage can actually cause increases in peak discharge rates. Because of the potential for detrimental downstream effects, storm water management policies often require downstream effects to be evaluated. Such evaluation requires the design engineer to collect additional topographic and land use data and make costly hydrologic analyses. Thus, a method, which is easy to apply and which would indicate whether or not a detailed hydrologic analysis of downstream impacts is necessary, should decrease the average cost of storm water management designs. A planning method that does not require either a large data base or a computer is presented. The time co-ordinates of runoff hydrographs are estimated using the time-of-concentration and the SCS runoff curve number; the discharge coordinates are estimated using a simple peak discharge equation. While the planning method does not require a detailed design of the detention basin, it does provide a reasonably accurate procedure for evaluating whether or not the installation of a detention basin will cause adverse downstream flooding.     

WATERSHED WEIGHTING OF EXPORT COEFFICIENTS TO MAP CRITICAL PHOSPHOROUS LOADING AREAS1

ABSTRACT: The Export Coefficient model (ECM) is capable of generating reasonable estimates of annual phosphorous loading simply from a watershed's land cover data and export coefficient values (ECVs). In its current form, the ECM assumes that ECVs are homogeneous within each land cover type, yet basic nutrient runoff and hydrological theory suggests that runoff rates have spatial patterns controlled by loading and filtering along the flow paths from the upslope contributing area and downslope dispersal area. Using a geographic information system (GIS) raster, or pixel, modeling format, these contributing area and dispersal area (CADA) controls were derived from the perspective of each individual watershed pixel to weight the otherwise homogeneous ECVs for phosphorous. Although the CADA‐ECM predicts export coefficient spatial variation for a single land use type, the lumped basin load is unaffected by weighting. After CADA weighting, a map of the new ECVs addressed the three fundamental criteria for targeting critical pollutant loading areas: (1) the presence of the pollutant, (2) the likelihood for runoff to carry the pollutant offsite, and (3) the likelihood that buffers will trap nutrients prior to their runoff into the receiving water body. These spatially distributed maps of the most important pollutant management areas were used within New York's West Branch Delaware River watershed to demonstrate how the CADA‐ECM could be applied in targeting phosphorous critical loading areas.     

IMPROVED RAINFALL/RUNOFF ESTIMATES USING REMOTELY SENSED SOIL MOISTURE1

ABSTRACT: Remotely sensed soil moisture data measured during the Southern Great Plains 1997 (SGP97) experiment in Oklahoma were used to characterize antecedent soil moisture conditions for the Soil Conservation Service (SCS) curve number method. The precipitation‐adjusted curve number and the soil moisture were strongly related (r²= 0.70). Remotely sensed soil moisture fields were used to adjust the curve numbers and the runoff estimates for five watersheds, in the Little Washita watershed; the results ranged from 2.8 km² to 601.6 km². The soil moisture data were applied at two spatial scales, a finer one (800 m) measuring spatial resolution and a coarser one (28 km). The root mean square error (RMSE) and the mean absolute error (MAE) of the runoff estimated by the standard SCS method was reduced by nearly 50 percent when the 800 m soil moisture data were used to adjust the curve number. The coarser scale soil moisture data also significantly reduced the error in the runoff predictions with 41 percent and 28 percent reductions in MAE and RMSE, respectively. The results suggest that remote sensing of soil moisture, when combined with the SCS method, can improve rainfall runoff predictions at a range of spatial scales.     

DRAINAGE GENERATION AND WATER USE IN THE EVERGLADES AGRICULTURAL AREA BASIN1

ABSTRACT: The Everglades Agricultural Area (EAA) covers 2,850 km² in area and is characterized by high water table and organic soil. The area is actively irrigated and drained as a function of weather conditions and crop status. Anthropogenic activities in the basin have resulted in nutrient-enriched drainage water that is discharged to Lake Okeechobee and the Everglades ecosystem. Water quantity and quality issues of the basin have become of increasing interest at local, state, and federal levels, so legislative and regulatory measures have been taken to improve water quality in discharges from the basin. In this study, simulation of hydrologic conditions and soil moisture were conducted using 100 years of daily synthetic rainfall data. From the simulations, the statistical distribution of half-month drainage discharge and supplemental water use in the basin was developed. The mean annual drainage/runoff was 49 cm, the mean supplemental water was 30 cm, and the mean annual a real rainfall was 122 cm. On the average, drainage exceeded supplemental water use in the months of June to September while from December to March drainage and supplemental water use were equivalent. Supplemental water use exceeded drainage in the months of October, November, April, and May. High drainage occurred in June and September; smallest drainage was in February. On the average, the highest supplemental water use occurred in May and November. The 10-year return period of annual drainage during wet and dry cycles were 60 cm and 38 cm per year, respectively. The semi-monthly drainage coefficient of variation (cv) is above 100 percent for the period from the second half of October to end of April. The cv is lower than 100 percent for the remaining season (wet season). The purpose of this paper is to present the magnitude, temporal, and frequency distribution of drainage runoff generation and supplemental water use in the EAA basin. Information on statistics of drainage will contribute to the optimization of the design and operation of drainage water treatment systems.     

流域非点源分布式模型AnnAGNPS参数的不确定性研究

流域非点源分布式模型的不确定性研究成为目前的热点问题之一。本研究以宁波市章溪河流域为研究区,通过GIS软件AreView和AnnAGNPS模型,集成利用莫里斯分类筛选法,选取临界源面积、SCS曲线系数、水土保持因子、饱和导水率、氮磷吸收率、施肥量等6个因子进行敏感性分析。模拟结果表明,土壤饱和导水率、水土保持因子和径流曲线CN值对模型输出结果影响较大;水土保持因子对泥沙、总磷和总有机碳负荷的模拟结果影响最大,均呈显著负效应;径流曲线CN值对总氮负荷计算结果影响最大,呈显著正效应。     

PARAMETER UNCERTAINTY IN RAINFALL-RUNOFF MODELING FOR POLDER SYSTEM DESIGN1

ABSTRACT: An approach is developed for incorporating the uncertainty of parameters for estimating runoff in the design of polder systems in ungaged watersheds. Monte Carlo Simulation is used to derive a set of realizations of streamflow hydrographs for a given design rainstorm using the U. S. Soil Conservation Service (SCS) unit hydrograph model. The inverse of the SCS curve number, which is a function of the antecedent runoff condition in the SCS model, is the random input in the Monte Carlo Simulation. Monte Carlo realizations of streamfiow hydrographs are used to simulate the performance of a polder flood protection system. From this simulation the probability of occurrence of flood levels for a particular hydraulic design may be used to evaluate its effectiveness. This approach is demonstrated for the Pluit Polder flood protection system for the City of Jakarta, Indonesia. While the results of the application indicate that uncertainty in the antecedent runoff condition is important, the effects of uncertainty in rainfall data, in additional runoff parameters, such as time to peak, in the hydraulic design, and in the rainfall-runoff model selected should also be considered. Although, the SCS model is limited to agricultural conditions, the approach presented herein may be applied to other flood control systems if appropriate storm runoff models are selected.