Nutrient Inputs to the Laurentian Great Lakes by Source and Watershed Estimated Using SPARROW Watershed Models1

Robertson, Dale M. and David A. Saad, 2011. Nutrient Inputs to the Laurentian Great Lakes by Source and Watershed Estimated Using SPARROW Watershed Models. Journal of the American Water Resources Association (JAWRA) 47(5):1011‐1033. DOI: 10.1111/j.1752‐1688.2011.00574.x Abstract: Nutrient input to the Laurentian Great Lakes continues to cause problems with eutrophication. To reduce the extent and severity of these problems, target nutrient loads were established and Total Maximum Daily Loads are being developed for many tributaries. Without detailed loading information it is difficult to determine if the targets are being met and how to prioritize rehabilitation efforts. To help address these issues, SPAtially Referenced Regressions On Watershed attributes (SPARROW) models were developed for estimating loads and sources of phosphorus (P) and nitrogen (N) from the United States (U.S.) portion of the Great Lakes, Upper Mississippi, Ohio, and Red River Basins. Results indicated that recent U.S. loadings to Lakes Michigan and Ontario are similar to those in the 1980s, whereas loadings to Lakes Superior, Huron, and Erie decreased. Highest loads were from tributaries with the largest watersheds, whereas highest yields were from areas with intense agriculture and large point sources of nutrients. Tributaries were ranked based on their relative loads and yields to each lake. Input from agricultural areas was a significant source of nutrients, contributing ～33‐44% of the P and ～33‐58% of the N, except for areas around Superior with little agriculture. Point sources were also significant, contributing ～14‐44% of the P and 13‐34% of the N. Watersheds around Lake Erie contributed nutrients at the highest rate (similar to intensively farmed areas in the Midwest) because they have the largest nutrient inputs and highest delivery ratio.     

Integrated Modular Modeling of Water and Nutrients From Point and Nonpoint Sources in the Patuxent River Watershed1

Abstract: We present a simple modular landscape simulation model that is based on a watershed modeling framework in which different sets of processes occurring in a watershed can be simulated separately with different models. The model consists of three loosely coupled submodels: a rainfall‐runoff model (TOPMODEL) for runoff generation in a subwatershed, a nutrient model for estimation of nutrients from nonpoint sources in a subwatershed, and a stream network model for integration of point and nonpoint sources in the routing process. The model performance was evaluated using monitoring data in the watershed of the Patuxent River, a tributary to the Chesapeake Bay in Maryland, from July 1997 through August 1999. Despite its simplicity, the landscape model predictions of streamflow, and sediment and nutrient loads were as good as or better than those of the Hydrological Simulation Program‐Fortran model, one of the most widely used comprehensive watershed models. The landscape model was applied to predict discharges of water, sediment, silicate, organic carbon, nitrate, ammonium, organic nitrogen, total nitrogen, organic phosphorus, phosphate, and total phosphorus from the Patuxent watershed to its estuary. The predicted annual water discharge to the estuary was very close to the measured annual total in terms of percent errors for both years of the study period (≤2%). The model predictions for loads of nutrients were also good (20‐30%) or very good (<20%) with exceptions of sediment (40%), phosphate (36%), and organic carbon (53%) for Year 1.     

AVGWLF‐Based Estimation of Nonpoint Source Nitrogen Loads Generated Within Long Island Sound Subwatersheds1

Abstract: The Generalized Watershed Loading Functions (GWLF) model and its ArcView interface (AVGWLF) were used to estimate and examine the components of the total nitrogen (TN) nonpoint source (NPS) load generated within New York and Connecticut (CT) watersheds surrounding Long Island Sound (LIS, the Sound). The majority of data used as model inputs were generally available from online sources, and the work involved an overall calibration to streamflow and TN data in accordance with generic guidelines recommended in the GWLF manual. The GWLF model performance for three calibration and two validation watersheds in CT was compared with results of a detailed model, Hydrological Simulation Program in Fortran, developed in a previous study. The results of the application illustrate the usefulness of the relatively simpler, less parameter‐intensive GWLF model in performing exploratory loading analysis in preparation for adaptive nutrient management in the LIS watersheds. The presented methodology is valuable for identification of priority watersheds for NPS pollution reduction and also for planning‐level evaluation of best management practices to achieve the desired reductions. It is estimated that ground‐water base flow may be the largest pathway for NPS TN to the Sound, contributing about 54% of the total NPS TN load, a finding with significant implications for LIS total maximum daily load reduction scenarios. In addition to ground water, septic systems are estimated to contribute about 17% of the total load, with the remaining TN load being mostly runoff from urban (17%), agricultural (5%), and low impact (e.g., forest) areas (6%).     

“Nutrient Inputs to the Laurentian Great Lakes by Source and Watershed Estimated Using SPARROW Watershed Models” by Dale M. Robertson and David A. Saad2

Richards, R. Peter, Ibrahim Alameddine, J. David Allan, David B. Baker, Nathan S. Bosch, Remegio Confesor, Joseph V. DePinto, David M. Dolan, Jeffrey M. Reutter, and Donald Scavia, 2012. Discussion –“Nutrient Inputs to the Laurentian Great Lakes by Source and Watershed Estimated Using SPARROW Watershed Models” by Dale M. Robertson and David A. Saad. Journal of the American Water Resources Association (JAWRA) 1‐10. DOI: 10.1111/jawr.12006 Abstract: Results from the Upper Midwest Major River Basin (MRB3) SPARROW model and underlying Fluxmaster load estimates were compared with detailed data available in the Lake Erie and Ohio River watersheds. Fluxmaster and SPARROW estimates of tributary loads tend to be biased low for total phosphorus and high for total nitrogen. These and other limitations of the application led to an overestimation of the relative contribution of point sources vs. nonpoint sources of phosphorus to eutrophication conditions in Lake Erie, when compared with direct estimates for data‐rich Ohio tributaries. These limitations include the use of a decade‐old reference point (2002), lack of modeling of dissolved phosphorus, lack of inclusion of inputs from the Canadian Lake Erie watersheds and from Lake Huron, and the choice to summarize results for the entire United States Lake Erie watershed, as opposed to the key Western and Central Basin watersheds that drive Lake Erie’s eutrophication processes. Although the MRB3 SPARROW model helps to meet a critical need by modeling unmonitored watersheds and ranking rivers by their estimated relative contributions, we recommend caution in use of the MRB3 SPARRROW model for Lake Erie management, and argue that the management of agricultural nonpoint sources should continue to be the primary focus for the Western and Central Basins of Lake Erie.     

Using Multiple Watershed Models to Predict Water,Nitrogen, and Phosphorus Discharges to the Patuxent Estuary1

Boomer, Kathleen M.B., Donald E. Weller, Thomas E. Jordan, Lewis Linker, Zhi‐Jun Liu, James Reilly, Gary Shenk, and Alexey A. Voinov, 2012. Using Multiple Watershed Models to Predict Water, Nitrogen, and Phosphorus Discharges to the Patuxent Estuary. Journal of the American Water Resources Association (JAWRA) 1‐25. DOI: 10.1111/j.1752‐1688.2012.00689.x Abstract: We analyzed an ensemble of watershed models that predict flow, nitrogen, and phosphorus discharges. The models differed in scope and complexity and used different input data, but all had been applied to evaluate human impacts on discharges to the Patuxent River or to the Chesapeake Bay. We compared predictions to observations of average annual, annual time series, and monthly discharge leaving three basins. No model consistently matched observed discharges better than the others, and predictions differed as much as 150% for every basin. Models that agreed best with the observations in one basin often were among the worst models for another material or basin. Combining model predictions into a model average improved overall reliability in matching observations, and the range of predictions helped describe uncertainty. The model average was not the closest to the observed discharge for every material, basin, and time frame, but the model average had the highest Nash–Sutcliffe performance across all combinations. Consistently poor performance in predicting phosphorus loads suggests that none of the models capture major controls. Differences among model predictions came from differences in model structures, input data, and the time period considered, and also to errors in the observed discharge. Ensemble watershed modeling helped identify research needs and quantify the uncertainties that should be considered when using the models in management decisions.     

Application of Tabu Search Algorithm With a Coupled AnnAGNPS‐CCHE1D Model to Optimize Agricultural Land Use1

Abstract: A principal contributor to soil erosion and nonpoint source pollution, agricultural activities have a major influence on the environmental quality of a watershed. Impact of agricultural activities on the quality of water resources can be minimized by implementing suitable agriculture land‐use types. Currently, land uses are designed (location, type, and operational schedule) based on field study results, and do not involve a science‐based approach to ensure their efficiency under particular regional, climatic, geological, and economical conditions. At present, there is a real need for new methodologies that can optimize the selection, design, and operation of agricultural land uses at the watershed scale by taking into account environmental, technical, and economical considerations, based on realistic simulations of watershed response. In this respect, the present study proposes a new approach, which integrates computational modeling of watershed processes, fluvial processes in the drainage network, and modern heuristic optimization techniques to design cost effective land‐use plans. The watershed model AnnAGNPS and the channel network model CCHE1D are linked together to simulate the sediment and pollutant transport processes. Based on the computational results, a multi‐objective function is set up to minimize soil losses, nutrient yields, and total associated costs, while the production profits from agriculture are maximized. The selected iterative optimization algorithm uses adaptive Tabu Search heuristic to flip (switching from one alternative to another) land‐change variables. USDA’s Goodwin Creek experimental watershed, located in Northern Mississippi, is used to demonstrate the capabilities of the proposed approach. The results show that the optimized land‐use design with BMPs using an integrated approach at the watershed level can provide efficient and cost‐effective conservation of the environmental quality by taking into account both productivity and profitability.     

SCIENCE AND POLICY IN INTEGRATED WATERSHED MANAGEMENT: A CASE STUDY1

ABSTRACT: Policy and management plans can be enhanced through effective communication between researchers and decision makers. Differences in understanding can come from differences in professional cultures. Scientists deal with facts, proof and incremental progress whereas the decision makers are often faced with perceptions, emotions and deadlines. A case study is presented illustrating the interaction between the political system and science on a water management issue. Irrigation projects in the western San Joaquin Valley of California lead to a situation requiring subsurface drainage and disposal of the drainage water. The original plan was to discharge the drainage water in the Suisun Bay east of the San Francisco Bay. Severe damage to birds associated with selenium in the water led to a reevaluation of irrigation and drainage management options. Federal and state agencies cooperated to establish a San Joaquin Valley Drainage Program (SJVDP) which was to develop plans for solving the problem. Discharge to the Bay was politically eliminated as an option for evaluation, an action criticized by a National Research Council Committee as not being scientifically based. The SJVDP published a Management Plan in 1990 which contained proposals viewed by the scientific community as not necessarily incorrect but not completely justified based on the scientific knowledge at the time. A segment of the Citizens Advisory Committee that was part of the SJVDP consisting of representatives from the interest groups viewed the Management Plan as a negotiated agreement between the environmental and agricultural interests. Presently, an Activity Plan exists, consisting of technical committees to evaluate the current technical and economic evaluation of the management options proposed in the Management Plan. This case study illustrates that factors other than scientific facts have bearing on decisions. Successful management plans must be technically sound, economically viable and socially acceptable. The scientific community needs to evaluate its role in the policy making arena and to focus research on questions of greatest value to decision makers, as well as to scientific peers.     

Using Spatially Detailed Water‐Quality Data and Solute‐Transport Modeling to Support Total Maximum Daily Load Development1

Walton‐Day, Katherine, Robert L. Runkel, and Briant A. Kimball, 2012. Using Spatially Detailed Water‐Quality Data and Solute‐Transport Modeling to Support Total Maximum Daily Load Development. Journal of the American Water Resources Association (JAWRA) 48(5): 949‐969. DOI: 10.1111/j.1752‐1688.2012.00662.x Abstract: Spatially detailed mass‐loading studies and solute‐transport modeling using OTIS (One‐dimensional Transport with Inflow and Storage) demonstrate how natural attenuation and loading from distinct and diffuse sources control stream water quality and affect load reductions predicted in total maximum daily loads (TMDLs). Mass‐loading data collected during low‐flow from Cement Creek (a low‐pH, metal‐rich stream because of natural and mining sources, and subject to TMDL requirements) were used to calibrate OTIS and showed spatially variable effects of natural attenuation (instream reactions) and loading from diffuse (groundwater) and distinct sources. OTIS simulations of the possible effects of TMDL‐recommended remediation of mine sites showed less improvement to dissolved zinc load and concentration (14% decrease) than did the TMDL (53‐63% decrease). The TMDL (1) assumed conservative transport, (2) accounted for loads removed by remediation by subtracting them from total load at the stream mouth, and (3) did not include diffuse‐source loads. In OTIS, loads were reduced near their source; the resulting concentration was decreased by natural attenuation and increased by diffuse‐source loads during downstream transport. Thus, by not including natural attenuation and loading from diffuse sources, the TMDL overestimated remediation effects at low flow. Use of the techniques presented herein could improve TMDLs by incorporating these processes during TMDL development.