Synergetic effects of Sr-doped CuBi<Subscript>2</Subscript>O<Subscript>4</Subscript> catalyst with enhanced photoactivity under UVA– light irradiation

Sr-doped CuBi₂O₄ micro-particles were successively synthesized via a solid-state technique and were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), and UV–vis diffuse reflectance spectroscopy (UV–vis-DRS) techniques. Results show that Sr-doped CuBi₂O₄ was crystallized with a spinel-type structure and tetragonal crystal system, and the band gap energy was about 1.35 eV. The as-prepared Sr-doped CuBi₂O₄ treated at 573 °C for 12 h exhibited the highest efficiency, as a result of 97.22 % of CR degradation within 220 min, which is approximately 31 times greater than CR photodegradation when catalyzed by CuBi₂O₄ (3.13 %) and about 2.3 times superior than that catalyzed by the untreated Sr–doped CuBi₂O₄ sample (42.08 %). Pseudo-first-order kinetic model gave the best fit, with highest correlation coefficients (R ²?=?0.94–0.97). The Sr–doping and extending reaction time up to 12 h could be effective in producing Sr-doped CuBi₂O₄ materials that delay electron–hole recombination, thereby increasing the lifetime of the electron electron–hole separation and support the charge carrier transfer to the catalyst surface. On the basis of the calculated energy band positions, superoxide radical anions (O₂ ^?–) were the main oxidative species responsible for the photocatalytic degradation of CR dye solution.     

Study of the uncertainty in NO<Subscript>2</Subscript> chemiluminescence measurements due to the NO–O<Subscript>3</Subscript> reaction in sampling lines

Introduction  

The change in light intensity that takes place when an ambient air sample is drawn into the detection chamber of a chemiluminescence monitor generates changes in the concentrations of several species, such as NO₂, NO and O₃. Although this phenomenon has been known for several decades, there is still no commonly accepted approach on when or how to correct for it in NO₂ and O₃ readings.     

Renewable energy powered membrane desalination — review of recent development

Due to current water stress, there is a problem with hygiene and sanitation in many parts of the world. According to predictions from the United Nations, more than 2.7 billion people will be challenged by water scarcity by the middle of the century. The water industry is increasingly interested in desalination of the sea, ocean, and brackish water. Desalination processes are widely classified as thermal or membrane technologies. In the Middle East, thermal desalination remains the primary technology of choice, but membrane processes, for example reverse osmosis (RO), have evolved rapidly and in many other parts of the world are currently even surpassing thermal processes. The purpose of this paper is to review the renewable energy source, the technology, desalination systems, and their possible integration with renewable energy resources and their cost. This article suggests that the most practical renewable desalination techniques to be used are the solar photovoltaic integrated RO desalination process, the hybrid solar photovoltaic-wind integrated RO desalination process, the hybrid solar photovoltaic-thermal (PVT) integrated RO desalination process, and the hybrid solar photovoltaic-thermal effect distillation (PVT-MED) desalination process. However, intensive research is still required to minimize the cost, reduce the heat loss, enhance the performance, and increase the productivity.

     

Endpoint ‘floating leaves’ of <Emphasis Type="Italic">Potamogeton natans</Emphasis>: A new method to evaluate the development of macrophytes in pond mesocosms

Goal, Scope and Background One of the advantages of long-term mesocosm experiments as compared to short-term standard toxicity tests in the laboratory is the potential for detecting secondary effects due to the interaction of species and recovery with biomass of macrophytes being an important endpoint. However, generating biomass data by harvesting is often laborious, time-consuming, costly and restricted to the end of the experiment. Moreover, valuable information may get lost, in particular in single application studies, since maximal primary effects and secondary effects or recovery occur per se at different times. Potamogeton natans was used as an example in order to test whether number and area of floating leaves can be reliably measured and be used as intermediate and final endpoints in mesocosm effect studies. Methods Digital photos, which were taken of the water surface in the course of an indoor pond mesocosm study on herbicide effects, were subjected to image analysis. The results were compared to wet weight and ash-free dry weight of Potamogeton at the end of the herbicide study. Results and Discussion Both number and area of floating leaves indicated the same herbicide effects as wet weight and ash-free dry weight of Potamogeton. Error introduced by the different work steps is small and can be further minimised by a number of method improvements. Recommendations and Perspectives In indoor mesocosm studies, errors due to the perspective adjustment may be circumvented by taking the photos perpendicular to the water surface. Correction for lens aberration, identical light conditions and the use of fluorescence images are considered promising. Field applications are proposed.     

Use of Calluna vulgaris to detect signals of nitrogen deposition across an urban–rural gradient

Densely populated cities can experience high concentrations of traffic-derived pollutants, with oxides of nitrogen and ammonia contributing significantly to the overall nitrogen (N) budget of urban ecosystems. This study investigated changes in the biochemistry of in situ Calluna vulgaris plants to detect signals of N deposition across an urban–rural gradient from central London to rural Surrey, UK. Foliar N concentrations and δ¹⁵N signatures were higher, and C/N ratios lower, in urban areas receiving the highest rates of N deposition. Plant phosphorus (P) concentrations were also highest in these areas, suggesting that elevated rates of N deposition are unlikely to result in progressive P-limitation in urban habitats. Free amino acid concentrations were positively related to N deposition for asparagine, glutamine, glycine, phenylalanine, isoleucine, leucine and lysine. Overall, relationships between tissue chemistry and N deposition were similar for oxidised, reduced and total N, although the strength of relationships varied with the different biochemical indicators. The results of this study indicate that current rates of N deposition are having substantial effects on plant biochemistry in urban areas, with likely implications for the biodiversity and functioning of urban ecosystems.     

Synthesis and characterization of γ-ferric oxide nanoparticles and their effect on <Emphasis Type="Italic">Solanum lycopersicum</Emphasis>

γ-Ferric oxide nanoparticles are synthesized through modern and facile ayurvedic route followed by normal and special purification steps, which are both cost-effective and eco-friendly. These synthesized γ-ferric oxide nanoparticles were applied on Solanum lycopersicum to search the effect on chlorophyll content. This process involves multiple filtration and calcination steps. The synthesized samples were analyzed by X-ray diffraction (XRD), UV-visible (UV-vis) spectroscopy, transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), and particle size analysis (PSA) to identify the purification step’s influence on the structural, optical, morphological, magnetic, and particle size properties of ferric oxide nanoparticles (γ-phase). X-ray diffraction has revealed that ferric oxide nanoparticles have rhombohedral structure of α-phase (hematite) in initial purification process later transformed into cubic structure γ-phase (maghemite). UV-vis spectroscopy analysis has clearly shown that by repetitive purification steps, λ_max has increased from 230 to 340 nm. TEM result has an intercorrelation with XRD results. γ-Ferric oxide nanoparticles were tested on Solanum lycopersicum (tomato seeds). The changes in the contents of chlorophyll a, chlorophyll b, and total carotene were studied using spectral measurements at two different dosages—0.5 and 2 M. As a result, at 0.5-M concentration, magnetic nanoparticles exhibit fruitful results by increasing the crop yield and being more resistant to chlorosis.     

Isolation and characterization of <Emphasis Type="Italic">Bradyrhizobium</Emphasis> sp. SR1 degrading two β-triketone herbicides

In this study, a bacterial strain able to use sulcotrione, a β-triketone herbicide, as sole source of carbon and energy was isolated from soil samples previously treated with this herbicide. Phylogenetic study based on16S rRNA gene sequence showed that the isolate has 100 % of similarity with several Bradyrhizobium and was accordingly designated as Bradyrhizobium sp. SR1. Plasmid profiling revealed the presence of a large plasmid (>50 kb) in SR1 not cured under nonselective conditions. Its transfer to Escherichia coli by electroporation failed to induce β-triketone degrading capacity, suggesting that degrading genes possibly located on this plasmid cannot be expressed in E. coli or that they are not plasmid borne. The evaluation of the SR1 ability to degrade various synthetic (mesotrione and tembotrione) and natural (leptospermone) triketones showed that this strain was also able to degrade mesotrione. Although SR1 was able to entirely dissipate both herbicides, degradation rate of sulcotrione was ten times higher than that of mesotrione, showing a greater affinity of degrading-enzyme system to sulcotrione. Degradation pathway of sulcotrione involved the formation of 2-chloro-4-mesylbenzoic acid (CMBA), previously identified in sulcotrione degradation, and of a new metabolite identified as hydroxy-sulcotrione. Mesotrione degradation pathway leads to the accumulation of 4-methylsulfonyl-2-nitrobenzoic acid (MNBA) and 2-amino-4 methylsulfonylbenzoic acid (AMBA), two well-known metabolites of this herbicide. Along with the dissipation of β-triketones, one could observe the decrease in 4-hydroxyphenylpyruvate dioxygenase (HPPD) inhibition, indicating that toxicity was due to parent molecules, and not to the formed metabolites. This is the first report of the isolation of bacterial strain able to transform two β-triketones.     

Collection efficiency of a midget impinger for nanoparticles in the range of 3–100 nm

Impingers have been employed for collection of biological particles for a long time and the collection efficiency for submicron particles has been well studied for a few impinger models, like the SKC Biosampler and the AGI 30. These efficiency studies have been limited to particles larger than about 15 nm. The aim of this research is to determine the collection efficiency of ultrafine particles (from 3 to 100 nm) of a 25 ml midget impinger. The effect of different collection parameters (particle type, collection fluid volume and type and flow rate) was studied and results are presented here. All results showed minimum collection efficiencies from 3 to 10% at approximately 40–57 nm. Increasing the volume of the collection liquid and flow rate improved the collection efficiency of the impinger.     

Measurements of β and α hexachlorocyclohexane in <Emphasis Type="Italic">Juglans regia</Emphasis> and <Emphasis Type="Italic">Prunus spinosa</Emphasis> trees in a contaminated area,central Italy

Vegetables play an important role in the human diet, and the transfer of toxic contaminants from the soil to plants has been little studied for most tree species and their edible portions. In an area affected by hexachlorocyclohexane (HCH) contamination, in the Sacco River Valley (central Italy), measurements of β- and α-HCH isomers were made on different parts of two tree species: Juglans regia and Prunus spinosa. Concentrations were analysed in roots, branches, leaves, fruits, and seeds. A spatial evaluation of the results highlighted an inverse association of contamination with distance from the river, which is the main route of transport in the environment. Results in J. regia showed decreasing values in this order: branches > leaves > husks > nutmeat. Results in P. spinosa showed decreasing values in the following order: branches > leaves > fruits. In J. regia, nutmeat values were all below limit of detection (LOD, 0.0005 mg/kg), except in one case in which a very low concentration of β-HCH was found (0.006 mg/Kg), compliant with maximum residue limits (MRLs). The ability of J. regia to store large quantities of β-HCH in wooden and leafy parts but not in edible kernels makes this plant a potential and precious tool in remediation and economical reconversion of polluted areas. It is also valuable for food and wood manufacturing.     

Catalase and ascorbate peroxidase—representative H<Subscript>2</Subscript>O<Subscript>2</Subscript>-detoxifying heme enzymes in plants

Plants have to counteract unavoidable stress-caused anomalies such as oxidative stress to sustain their lives and serve heterotrophic organisms including humans. Among major enzymatic antioxidants, catalase (CAT; EC 1.11.1.6) and ascorbate peroxidase (APX; EC 1.11.1.11) are representative heme enzymes meant for metabolizing stress-provoked reactive oxygen species (ROS; such as H₂O₂) and controlling their potential impacts on cellular metabolism and functions. CAT mainly occurs in peroxisomes and catalyzes the dismutation reaction without requiring any reductant; whereas, APX has a higher affinity for H₂O₂ and utilizes ascorbate (AsA) as specific electron donor for the reduction of H₂O₂ into H₂O in organelles including chloroplasts, cytosol, mitochondria, and peroxisomes. Literature is extensive on the glutathione-associated H₂O₂-metabolizing systems in plants. However, discussion is meager or scattered in the literature available on the biochemical and genomic characterization as well as techniques for the assays of CAT and APX and their modulation in plants under abiotic stresses. This paper aims (a) to introduce oxidative stress-causative factors and highlights their relationship with abiotic stresses in plants; (b) to overview structure, occurrence, and significance of CAT and APX in plants; (c) to summarize the principles of current technologies used to assay CAT and APX in plants; (d) to appraise available literature on the modulation of CAT and APX in plants under major abiotic stresses; and finally, (e) to consider a brief cross-talk on the CAT and APX, and this also highlights the aspects unexplored so far.     

Behaviour and dynamics of di-ammonium phosphate in bauxite processing residue sand in Western Australia—I. NH<Subscript>3</Subscript> volatilisation and residual nitrogen availability

Background, aim and scope

Australia is the largest producer of bauxite in the world, with an annual output of approximately 62 million metric dry tons in 2007. For every tonne of alumina, about 2 tonnes of highly alkaline and highly saline bauxite-processing residue are produced. In Western Australia, Alcoa World Alumina, Australia (Alcoa) produces approximately 15 MT of residue annually from its refineries (Kwinana, Pinjarra and Wagerup). The bauxite-processing residue sand (BRS) fraction represents the primary material for rehabilitating Alcoa’s residue disposal areas (RDAs). However, the inherently hostile characteristics (high alkalinity, high salinity and poor nutrient availability) of BRS pose severe limitations for establishing sustainable plant cover systems. Alcoa currently applies 2.7 t ha^?1 of di-ammonium phosphate ((NH₄)₂HPO₄; DAP)-based fertiliser as a part of rehabilitation of the outer residue sand embankments of its RDAs. Limited information on the behaviour of the dominant components of this inorganic fertiliser in highly alkaline BRS is currently available, despite the known effects of pH on ammonium (NH₄) and phosphorus (P) behaviour. The aim of this study was to quantify the effects of pH on NH₃ volatilisation and residual nitrogen (N) in BRS following DAP applications.

Methods

The sponge-trapping and KCl-extraction method was used for determining NH₃ volatilisation from surface-applied DAP in samples of BRS collected from each of Alcoa’s three Western Australia Refineries (Kwinana, Pinjarra, Wagerup) under various pH conditions (pH 4, 7, 9 and 11). Following cessation of volatilisation, the residual N was extracted from BRS using 2 M KCl and concentrations of NH ₄ ⁺ –N and NO ₃ ^? –N were determined by flow injection analysis.

Results

The quantities of NH₃ volatilised increased dramatically as the pH increased from 4 to 11. Much of the N lost as NH₃ (up to 95.2%) occurred within a short period (24 h to 7 days), particularly for the pH 9 and 11 treatments. Concentrations of residual NH ₄ ⁺ –N recovered in DAP-treated BRS at the end of the experiment decreased with increasing pH. This finding was consistent with increasing loss of N via volatilisation as pH increased. The concentration of NO ₃ ^? –N was very low due to no nitrification in BRS.

Discussion

The pH was a key driver for NH₃ volatilisation from DAP-treated BRS and primarily controlled N dynamics in BRS. Results indicate that NH₄ not adsorbed by BRS was highly susceptible to volatilisation. The likely lack of nitrifying bacteria did not allow conversion of ammonium to nitrate, thereby further exacerbating the potential for loss via volatilisation

Conclusions

It was demonstrated that the pH is the key factor controlling the loss of inorganic N from BRS. Although volatilisation was considerably lower at pH 4, achieving this pH reduction in the field is not possible at present. Findings from this study highlight the need to better understand which forms of N fertiliser are most suitable for use in highly alkaline BRS.

Recommendation and perspectives

Although pH reduction is the most likely means of stopping NH₃ volatilisation in BRS, it is economically and operationally unfeasible to add sufficient acidity for adequately lowering pH in the BRS for revegetation. More attention on forms of fertilisers more suitable to highly alkaline, microbially inert soil conditions appears to be warranted.

     

Evaluation of the efficiency of a Venturi scrubber in particulate matter collection smaller than 2.5 µm emitted by biomass burning

Environmental Science and Pollution Research - Energy demand has increased worldwide, and biomass burning is one of the solutions most used by industries, especially in countries that have a great...     

The diminishing marginal contribution of R&D investment on green technological progress: a case study of China’s manufacturing industry

Environmental Science and Pollution Research - One of the ways to fight against global warming is by means of green technological progress. This paper explores the nonlinear relationship between...     

Biological effect monitoring in dab (<Emphasis Type="Italic">Limanda limanda</Emphasis>) using gene transcript of CYP1A1 or EROD—a comparison

BACKGROUND, AIM, AND SCOPE: Gene expression analyses with real-time (RT)-polymerase chain reaction (PCR) gains importance in marine monitoring. This new technique has to be compared to the classical approaches like the well known biomarker ethoxyresorufin-O-deethylase (EROD) to test their suitability for monitoring programmes. The goal of the present study is to compare EROD activity and CYP1A1 mRNA expression in the important monitoring fish species dab (Limanda limanda) and to answer the question of whether these parameters reflect the polycyclic aromatic hydrocarbon (PAH) contamination of the fish. Further on, glyceraldehyd-3-phosphate dehydrogenase (GAPDH) was investigated as a potential housekeeping gene. MATERIALS AND METHODS: Female dab were caught in the summer of 2004 in the North Sea and in the Baltic. EROD activity was determined in liver samples by a kinetic fluorimetric assay according to a standard protocol. The gene expression of CYP1A (cytochrome P450 1A) and GAPDH were determined by means of RT-PCR. Results were compared to gonado somatic index and to the concentration of PAH metabolite 1OHPyr (1-hydroxypyrene) analysed in the bile fluids of the fish, respectively. RESULTS: Dab from all stations showed a considerable individual variation in the levels of both CYP1A mRNA and EROD. Highest mean values for CYP1A mRNA and EROD were detected in the northern part of the sampling area. In contrast, the PAH metabolite 1OHPyr was found at the highest concentration in fish caught near the German coast. CYP1A mRNA and EROD showed only a minor but significant correlation (r = 0.32, p < 0.05, n = 123). 1OHPyr in bile correlated significantly (p < 0.05) with the amount of GAPDH mRNA content in the liver. DISCUSSION: The significant but low correlation of CYP1A mRNA and EROD activity on an individual basis illustrates that these two parameters are apparently not closely linked. However, maximum EROD values correspond with maximum CYP1A mRNA concentrations when station means are regarded. Because EROD and CYP1A mRNA in dab follow different physiological principles, their application will lead to related but not identical monitoring results. This should be taken into account when future marine monitoring programmes are designed. The results also indicate that PAH are not the crucial factor for CYP1A and EROD levels in dab from the off-shore areas in the North Sea. This is remarkable because the PAH metabolism is known to be CYP1A-dependent and the widely used biomarker EROD has been recommended for monitoring PAH-related effects in fish from the North Sea. Due to a correlation between GAPDH and 1OHPyr, GAPDH was not suitable as housekeeping gene for dab. CONCLUSIONS: Neither the results from EROD nor from CYP1A1 mRNA measurements in dab reflected their exposure to PAH as measured by the PAH metabolite 1OHPyr. Thus, the question arises of whether EROD or CYP1A mRNA is a suitable biomarker at all to indicate PAH exposure in dab from the open North Sea. RECOMMENDATIONS AND PERSPECTIVES: For future biological effect monitoring, it is advisable to measure more and predominately independent parameters by RT-PCR and to incorporate more components of the detoxification system.     

Accumulation of Cd,Cu and Zn in shoots of maize (<Emphasis Type="Italic">Zea mays</Emphasis> L.) exposed to 0.8 or 20 nM Cd during vegetative growth and the relation with xylem sap composition

This work focuses on the exposure of maize plants to nanomolar concentrations of Cd, which is relevant for agricultural soils cropped with food and feed plants. Maize plants were cultivated in nutrient solution at 0.8 or 20 nM Cd during the vegetative growth stages. No significant hormesis or toxic effects of Cd were observed on maize growth, but a decrease in the allocation of Cd to shoots between the 0.8 and 20 nM Cd exposures revealed that the plants already responded to these low concentrations of Cd according to a shoot Cd excluder strategy. The Cd, Cu and Zn concentrations in shoots decreased with time as the result of an early decrease in the root/shoot ratio and of a decrease in the coefficient of allocation to aboveground for Zn and Cd at 20 nM. As a consequence, shoots of young plants were richer in micronutrients Cu and Zn but also in toxic Cd. The rate of delivery of Cd, Cu and Zn from xylem sap was successfully used to predict the time course of concentrations of Cd, Cu and Zn in the shoot. However, it overestimated the actual concentrations of Cd in the shoot, presumably because the reallocation of this trace element from shoots back to roots was not taken into account.     

Importance of exposure route for behavioural responses in <Emphasis Type="Italic">Lumbriculus variegatus</Emphasis> Müller (Oligochaeta: Lumbriculida) in short-term exposures to Pb

Goal, Scope and Background

Lumbriculus variegatus Müller (Oligochaeta), a common freshwater sediment-dweller, has frequently been used in toxicokinetic studies, although has been less used in ecotoxicity tests.

Methods

For the first time the Multispecies Freshwater Biomonitor® (MFB) was applied in a short-term whole-sediment toxicity test. The MFB automatically and quantitatively recorded the spontaneous locomotory behaviour of Lumbriculus variegatus in exposures with two compartments, water and sediment. The study questioned, whether the animals altered their locomotion depending on the compartment which was spiked with lead (Pb).

Results and Discussion

As in the exposures to Pb-contaminated water/clean sediment, the animals exposed to Pb-contaminated sediment/clean water showed higher activities in intermediate Pb-concentrations. This indicates, that spontaneous locomotory activity is affected by Pb-concentrations at sublethal levels regardless of whether the Pb-concentration is found in the water or in the sediment, because these animals use both environmental compartments simultaneously. However, within the same Pb-levels, the animals showed higher locomotory activity in contaminated water compared with contaminated sediment. This indicates a possible tendency to withdraw from (‘avoidance’) contaminated water into the clean sediment compartment, whereas there was no withdrawal from contaminated sediment into clean water. The latter might be explained by the fact that withdrawal from sediment to water might increase the risk of predation and drift in nature, whereas retracting to sediment might provide shelter.

Conclusions

The study showed that spontaneous locomotory responses of L. variegatus to Pb depend on whether the water or sediment is contaminated. The study also concluded that the Multispecies Freshwater Biomonitor® can be applied effectively in sediment toxicity testing.

Recommendations and Perspectives

More emphasis should be given to the interactions of water/sediment in sediment ecotoxicity tests to better simulate field conditions and increase ecological realism in risk assessment, especially as quantitative recording methods exisit.

     

A three-step approach to minimise the impact of a mining site on vicuña (<Emphasis Type="Italic">Vicugna vicugna</Emphasis>) and to restore landscape connectivity

Resource extraction projects generate a diversity of negative effects on the environment that are difficult to predict and mitigate. Consequently, adaptive management approaches have been advocated to develop effective responses to impacts that were not predicted. Mammal populations living in or around mine sites are frequently of management concern; yet, there is a dearth of published information on how to minimise the negative effects of different phases of mining operations on them. Here, we present the case study of a copper mine in the Chilean Altiplano, which caused roadkills of the protected vicuña (Vicugna vicugna). This issue led to a three-step solution being implemented: (1) the initial identification of the problem and implementation of an emergency response, (2) the scientific analysis for decision making and (3) the planning and informed implementation of responses for different future scenarios and timescales. The measures taken under each of these steps provide examples of environmental management approaches that make use of scientific information to develop integrated management responses. In brief, our case study showed how (1) the timescale and the necessity/urgency of the case were addressed, (2) the various stakeholders involved were taken into account and (3) changes were included into the physical, human and organisational elements of the company to achieve the stated objectives.