共查询到19条相似文献,搜索用时 234 毫秒
1.
根据出铁场烟尘特性,探索大型高炉出铁场除尘方式中更为有效、可靠的方法,推动我国大型高炉出铁场除尘技术的发展,结合唐钢2560m^3高炉出铁场实际,阐述了唐钢2560m^3高炉出铁场除尘器成功经验,可供类似工程设计参考。 相似文献
2.
3.
4.
5.
对58m^2烧结机混料系统原除尘状况进行了详细分析,对新建52m^2烧结机混料系统通风除尘设备选型、设计方案及效果进行了详尽的阐述。 相似文献
6.
7.
介绍了安钢90m^2烧结系统除尘配置状况及在运行中存在的问题,提出了烧结工程中除尘配置的设想。 相似文献
8.
本文通过对宝钢三高炉出铁场除尘设计的回顾与思考,以笔者对宝钢一,二号高炉出铁场除尘系统运行实况的新身经历,并结合宝钢三号高炉出铁场除尘系统投产前的联调实践,对特大型高炉出铁场烟法控制提出了若干可供参考的见解,以期对今后国内相关领域烟尘控制技术的进步有所裨益。 相似文献
9.
我国炼铁除尘技术存在的问题和改进措施 总被引:1,自引:0,他引:1
目前,我国有各种高炉3200余座,其中,2000m3以上高炉43座,500m3以上73座,约占总生产能力的50%。炼铁生产中的粉尘产生于高炉原料系统、出铁场、煤气系统及喷煤制粉输粉系统。冶炼一吨铁水可产生9~12kg烟尘。炼铁生产产生的粉尘具有点多量大面广的特点,且其无组织排放尘源,移动尘源,易燃易爆尘源,高浓度尘源的除尘皆具有较大的技术难度。以下就炼铁生产除尘技术存在的问题和取得的进展分述如下:一、高炉煤气干法净化高炉煤气由含尘量40~100g/m3降至使用要求的5—6mg/m3,要经过一系列的除尘净化过程,其传统工艺为湿法除尘。湿… 相似文献
10.
11.
12.
介绍了电石炉的生产工艺和除尘系统的工艺特点,以及电石炉除尘系统设计前和实际工程设计中需要注意的一些问题。 相似文献
13.
某钢铁企业高炉炼铁车间的出铁场在生产过程中产生大量高浓度的烟尘,对厂区的大气环境及周边的环境造成严重污染,同时直接危害了职工的身体健康。通过对整个出铁场除尘工艺系统及通风状况的分析及实际应用情况,总结出了适合该场合的系统除尘方案。 相似文献
14.
Totally dry cleaning has become a common technology for top gas cleaning in blast furnaces in recent years. A significant advantage of totally dry gas cleaning is that the dust collected is obtained as dry powder, thus simplifying the recycling of the dust in the sinter plant and avoiding aqueous emissions. The concentration of some heavy metals, especially zinc, in the collected dust is usually higher than the maximum tolerable concentration for recycling to the sinter process. Therefore, a process for separation of dust with a low level of contamination from the rest is necessary to make partial recycling possible. This is possible because the limited components are more volatile and accumulate in the finer dust fraction. In wet blast furnace top gas cleaning, hydrocyclones are well established for this separation. For the separation of dry powder from the dry dedusting process air classification can be used. Dust from the top gas of a blast furnace with a fabric filter for dry top gas cleaning was split into several size fractions using a laboratory air classifier. The concentration of Ca, Cd, Cl, Cu, Fe, K, Na, Pb and Zn was analysed for each particle class and the loss on ignition was determined. A strong dependence of the concentration on the particle size was found for the more volatile metals, whereas the Fe and Ca concentration and the loss on ignition were quite evenly distributed. With the calculated recovery–removal-functions the possible recycling rate can be estimated for a given removal rate for the limited components. 相似文献
15.
新疆奎屯市17种落叶树种的滞尘能力研究 总被引:1,自引:0,他引:1
对奎屯市17种落叶树种进行了滞尘能力测定。结果表明,不同类型植物滞尘能力差异显著,灌木滞尘能力大于乔木。在11种落叶乔木中,滞尘能力最强的是圆冠榆,平均滞尘能力达3.6894g/m^2;在5种落叶灌木中,滞尘能力最强的是玫瑰,平均滞尘量可达3.6581g/m^2。 相似文献
16.
针对当前碱回收锅炉除尘器的除尘效率不能满足排放要求的情况,分析了目前造纸厂电除尘设备运行中出现的主要问题,提出了一些设计观点和相关建议。 相似文献
17.
18.
介绍了气力输送系统在电厂660MW机组除灰中的应用,并对飞灰特性,以及除灰系统设计、关键技术运用、运行情况、设备维护和故障处理等问题进行了分析论述。 相似文献
19.
本文研究了硅铁电炉布袋除尘收集的烟尘性能,烟尘低温固结球团的性能和工艺方法。研究结果表明,硅铁电炉烟尘中SiO2 约占90 - 95 % ,其它组分含量较低,有利于进行回收利用。烟尘密度小、粒度细、表面活性差、成球性能差。采用添加粘结剂进行自然养护和低温固结处理,均能获得强度较好的固结球团,能够加入铁合金炉回收利用。 相似文献