Modelling nitrogen fluxes at the landscape scale

The distribution and impacts of different nitrogen pollutants are inextricably linked. To understand the problem fully, the interactions between the different pollutants need to be taken into account. This is particularly important when it comes to abatement techniques, since measures to reduce emissions of one nitrogen pollutant can often lead to an increase in another. This project represents a step towards greater understanding of these issues by linking together new and existing nitrogen flux models into a larger framework. The modelling framework has been constructed and some of the nitrogen flows between fields, farms and the atmosphere have been modelled for a UK study area for typical farm management scenarios.     

中国与世界银行对新建火电厂的环保要求对比分析

详细介绍了中国和世界银行对新建火电厂的不同环保要求,比较分析了电厂污染物排放中的大气（颗粒物、二氧化硫、氮氧化物）、工业废水和噪声的排放限值,对规划、新建火电厂的主要污染物控制具有参考意义。     

Perspectives and limits for cement kilns as a destination for RDF

RDF, the high calorific value fraction of MSW obtained by conventional separation systems, can be employed in technological plants (mainly cement kilns) in order to obtain a useful energy recovery. It is interesting and important to evaluate this possibility within the general framework of waste-to-energy solutions. The solution must be assessed on the basis of different aspects, namely: technological features and clinker characteristics; local atmospheric pollution; the effects of RDF used in cement kilns on the generation of greenhouse gases; the economics of conventional solid fuels substitution and planning perspectives, from the point of view of the destination of RDF and optimal cement kiln policy. The different experiences of this issue throughout Europe are reviewed, and some applications within Italy are also been considered. The main findings of the study are that the use of RDF in cement kilns instead of coal or coke offers environmental benefits in terms of greenhouse gases, while the formation of conventional gaseous pollutants is not a critical aspect. Indeed, the generation of nitrogen oxides can probably be lower because of lower flame temperatures or lower air excess. The presence of chlorinated micro-pollutants is not influenced by the presence of RDF in fuel, whereas depending on the quality of the RDF, some problems could arise compared to the substituted fuel as far as heavy metals are concerned, chiefly the more volatile ones.     

Co-combustion performance of poultry wastes and natural gas in the advanced Swirling Fluidized Bed Combustor (SFBC)

Co-combustion of poultry wastes with natural gas in an advanced Swirling Fluidized Bed Combustor (SFBC) has been carried out to investigate the performance of poultry wastes combustion. Wastes burnt were poultry litter, poultry manure and sawdust. This paper presents the effect of three different wastes, excess air ratio, and secondary/total air ratio on the combustion characteristics. These characteristics include temperature distributions, carbon combustion efficiency, major gaseous pollutants emissions and heat recovery efficiency. The results indicate that, with the given moisture and ash contents in wastes, the excess air and the secondary air play important roles in achieving stable combustion. The carbon combustion efficiency could increase by 8-10% when the excess air is increased to 25% with the secondary air being at 20% and having a low injection height. However, the carbon combustion efficiency for the sawdust, which is 92% on average, is much higher than that of the poultry litter and manure, which is 81% and 76% on average, respectively. Differences regarding temperature distribution and pollutants emission were also observed with different combinations of the excess air, the secondary air and the secondary air injection height. The NO(x) emission was very low even though the materials contain high levels of nitrogen. In addition, the heat recovery efficiency aiming at the commercial use of the SFBC system for the farm industries was also evaluated.     

发电集团应对新火电厂大气污染物排放标准的思考

新的火电厂大气污染排放标准重点加大了对火电厂大气污染物中NOx的控制力度,收严了SO2、烟尘等污染物排放限值,增设了汞及其化合物控制指标。该标准的实施对发电企业的生存和发展带来一定的影响,为了落实新标准,发电集团应在法律法规政策及技术产业方面采取相应措施,加快除尘、脱硫、脱硝、脱汞等新技术的研究和应用,从单一污染物的总量控制向多污染物协同控制转变,积极探索和思考发电集团绿色低碳发展的道路。     

Determination of Nitrogen and Sulfur in Plants and Soils Sampled from the Area Near a Fertilizer Plant

The purpose of this study was to investigate NO_x and SO₂-inducednitrogen and sulfur levels accumulated over vegetation and soil in the surrounds of the fertilizer plant in Kütahya, Turkey. Therefore, leaf samples collected from the seven locations adjacent to the plant were morphologically observed (pollution-related injuries and color deformation) and chemically analyzed. Besides, nitrogen and sulfur contents were determined in the soil samples collected from each location. A significant correlation was achieved between locations and different vegetation samples and soil samples. The highest nitrogen level present in the trees was 3.07 ± 0.105% (3rd location, Robinia pseudoacacia), with the highest sulfur level being 5.79 ± 0.085% (3rd location, Salix alba). The highest nitrogen and sulfur levels in soils were 0.31 ± 0.045 and 0.57 ± 0.052% (3rd location), respectively. Furthermore, the highest nitrogen and sulfur levels were 4.69 and 2.20%, respectively,in agricultural plants in the surrounds of the fertilizer plant. A higher level of pollutants was observed in the samples collectedfrom the locations in the direction of the prevailing wind. Also, differences between locations as well as between plant specimens were statistically evaluated.     

Long Term Trends in Sulphur and Nitrogen Deposition in Europe and the Cause of Non-linearities

Emissions of sulphur and oxidized nitrogen compounds in Europe have been reduced following a series of control measures during the last two decades. These changes have taken place during a period in which the primary gases and the wet deposition throughout Europe were extensively monitored. Since the end of the 1970s, for example land based sulphur emissions declined by between 90 and 70% depending on the region. Over the same period the total deposition of sulphur and its partitioning into wet and dry deposition have declined, but the spatial pattern in the reduction in deposition differs from that of emission and has changed with time. Such non-linearities in the emission-deposition relationship are important to understand as they complicate the process of assessing the effects of emission reduction strategies. Observed non-linearities in terrestrial sulphur emission-deposition patterns have been identified in north west Europe due to increases in marine emissions, and are currently slowing the recovery of freshwater ecosystems. Changes in the relative amounts of SO₂ and NH₃ in air over the last two decades have also changed the affinity of terrestrial surfaces for SO₂ and have therefore changed the deposition velocity of SO₂ over substantial areas. The consequence of this effect has been the very rapid reduction in ambient SO₂ concentration in some of the major source areas of Europe, where NH₃ did not change much. Interactions between the different pollutants, generating non-linearities are now being incorporated in long-range transport models to simulate the effects of historical emission trends and to provide projections into the future. This paper identifies non-linearities in emission deposition relationships for sulphur and nitrogen compounds in Europe using data from the EMEP long-rang transport model and measured concentration fields of the major ions in precipitation and of SO₂ and NO₂ in surface air.     

提高炼油废水处理场的氨氮去除率

对炼油废水处理场现有工艺进行流程优化,将MBR装置调整在接触氧化池之后运行.优化流程后氨氮平均去除率可从近于0提高至71.70％;COD平均去除率可从50.00％提高至72.00％.通过对工艺流程的对比,分析了现有工艺氨氮质量浓度难以降低的原因,指出废水中存在的某些污染物对硝化细菌起到抑制作用,减少了反应器中硝化细菌的...     

Atmospheric Levels of Nitrogen Oxides at a Greek Oil Refinery Compared with the Urban Measurements in Athens

Oil refining is among the industrial activities that emit considerable amounts of air pollutants into the atmosphere. Nitrogen oxides are important air pollutants that are emitted by oil refineries as products of combustion processes. The ambient air concentrations of nitrogen oxide (NO) and nitrogen dioxide (NO₂) were monitored continuously at a site close to an oil refinery, near the city of Corinth in Greece, during autumn 1997 together with the main meteorological parameters. The contribution of the oil refinery to the measured atmospheric levels of nitrogen oxides was estimated. The ambient air concentration of nitrogen oxides in the area surrounding the oil refinery were generally lower than the ambient air concentrations in the urban area of Athens in Greece, and the NO₂ levels were always below the existing air quality standards. The influence of the refinery emitted NO_x in the photochemical production of ozone seems to be more important in terms of human and vegetation exposure given the high ozone backgrounds measured in the area.     

Relative Contribution of Various Diesel Vehicle Classes to the Thessaloniki Urban Air Pollution

Within the framework of this paper an attempt is made in order to assess the relative contribution of the main diesel vehicle classes; namely, buses, taxis and heavy goods vehicles (HGVs) to the air pollution of the Thessaloniki (Greece) urban area based on an emission factors approach. Data sets refer to the situation before and after the construction of the city ring road. Findings show the significant contribution of the ring road to the urban air pollution decrease. This reduction could be mainly attributed to the observed significant traffic decrease of HGVs in the city center between 1988 and 1998. Small changes have been observed during the same period for the bus and taxi traffic in the city center. Also, the improvement of the diesel fuel quality and the temporal renewal of the diesel vehicles are considered as important factors for the observed temporal decreasing trend of the air pollutants with diesel oil origin.     

聚酯化纤废水中特征污染物含量与COD的相关性研究

研究了聚酯化纤废水中有机污染物乙醛、乙酸、乙二醇含量与ＣＯＤ之间的相关性，确定了ＣＯＤ与上述特征污染物含量的比值，并测定了它们的氧化率，为企业的生产工艺管理和 保管理提供了基础数据。     

End-of-life vehicle recycling and automobile shredder residue management in Japan

The Japanese Government introduced the Law on Recycling of End-of-Life Vehicles (ELV Recycling Law) in 2002. This law requires manufacturers to retrieve chlorofluorocarbons (CFCs), airbags, and automobile shredder residue (ASR) from ELVs and to properly recycle the remaining materials. This framework is compared with European ELV directives. Pilot-scale incineration plant testing has revealed a greater formation of by-product persistent organic pollutants (POPs) during the primary combustion of ASR compared to normal municipal solid waste. This may be attributed to the abundance of chlorine, Cu, and Fe in ASR, as Cu and Fe have been found to catalyze the formation of POPs under certain conditions. However, most by-product POPs were destroyed by the secondary combustion, and almost all were removed after flue gas treatment. The direct melting system is a shaft-type gasification and melting technology that has proved effective in many municipal solid waste applications. This system can be applied to ASR recycling for effective decomposition of brominated flame retardants and polybrominated dioxins.     

Low NOx burners--prediction of emissions concentration based on design,measurements and modelling

This paper describes possible ways of prediction of nitrogen oxides formation during combustion of hydrocarbon fuels. Mathematical model based on experimental data acquired from the testing facility has been developed. The model enables to predict--at a high probability measure--the extent of nitrogen oxides emissions. The mathematical model of nitrogen oxide formation relies on the application of simplified kinetic equations describing the formation of nitrogen oxides at so-called equivalent temperature. It is a semi-empirical model that comes out of experimental knowledge. An important role played by the burner design itself has been emphasized and therefore an important supplementary parameter of the model is the characteristic of the burner design. It has been established that there was a good agreement between experimental data and those calculated by the application of the model to various conditions marked out by different combustion parameters in the combustion chamber. The results obtained by application of the model respect the influence of parameters validated by industrial practice that control the formation of nitrogen oxides in the course of fuel combustion. Such parameters-first of all-tare the temperature in the combustion chamber and the concentration of the substances taking part in the reaction. By application of the model, it is possible to assess the consequence of, for example the surplus of combustion air, the increase of temperature of combustion air, the supply of inert gas, etc. on the nitrogen oxides emissions of the operating burner under evaluation. Efficient combining of experience and sophisticated approach together with importance of thus access for an improved design are shown.     

Nitrogen management in landfill leachate: Application of SHARON,ANAMMOX and combined SHARON–ANAMMOX process

In today’s context of waste management, landfilling of Municipal Solid Waste (MSW) is considered to be one of the standard practices worldwide. Leachate generated from municipal landfills has become a great threat to the surroundings as it contains high concentration of organics, ammonia and other toxic pollutants. Emphasis has to be placed on the removal of ammonia nitrogen in particular, derived from the nitrogen content of the MSW and it is a long term pollution problem in landfills which determines when the landfill can be considered stable. Several biological processes are available for the removal of ammonia but novel processes such as the Single Reactor System for High Activity Ammonia Removal over Nitrite (SHARON) and Anaerobic Ammonium Oxidation (ANAMMOX) process have great potential and several advantages over conventional processes. The combined SHARON–ANAMMOX process for municipal landfill leachate treatment is a new, innovative and significant approach that requires more research to identify and solve critical issues. This review addresses the operational parameters, microbiology, biochemistry and application of both the processes to remove ammonia from leachate.     

The performance of a natural treatment system for landfill leachate with special emphasis on the fate of organic pollutants.

A natural treatment system for the treatment of leachate was studied at Moskogen landfill in southern Sweden. This facility consists of three consecutive ponds and a soil-plant (SP)-system. A test area, receiving water from the third pond with the same hydraulic load as the SP-system, was used for estimation of the latter system. Quality parameters including biochemical oxygen demand, total organic carbon, ammonium, nitrate, orthophosphate, and total suspended solids along the treatment line were determined as well as soluble metals (Cu, Cd, Zn, Cr, Ni, and Pb). In addition a thorough investigation along the treatment line has also been performed concerning volatile organic compounds and semi-volatile organic compounds. Non-polar organic compounds were investigated using gas chromatography-mass spectrometry. Quantification was based on the assumption of equal response for the compounds found in comparison with the chosen marker substances. For polar, water-soluble compounds the measurements were restricted to phenolic compounds using high-performance liquid chromatography. Several different types of organic compounds were found in the raw leachate including aromatics, benzene-sulfonamides, biphenyls, naphthalene, organic phosphates, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, phenols and phthalates. The treatment system efficiently reduced organic pollutants, heavy metals, and nitrogen/phosphorous compounds. Most metals and organic compounds in the leachate were already significantly reduced to a low level in the treatment ponds and ammonium-N was efficiently transformed to nitrate-N in the SP-system.     

Health risk assessment of air emissions from a municipal solid waste incineration plant--a case study

A health risk assessment of long-term emissions of carcinogenic and non-carcinogenic air pollutants has been carried out for the municipal solid waste incinerator (MSWI) of the city of Taranto, Italy. Ground level air concentrations and soil deposition of carcinogenic (Polychlorinated Dibenzo-p-Dioxins/Furans and Cd) and non-carcinogenic (Pb and Hg) pollutants have been estimated using a well documented atmospheric dispersion model. Health risk values for air inhalation, dermal contact, soil and food ingestion have been calculated based on a combination of these concentrations and a matrix of environmental exposure factors. Exposure of the surrounding population has been addressed for different release scenarios based on four pollutants, four exposure pathways and two receptor groups (children and adults). Spatial risk distribution and cancer excess cases projected from plant emissions have been compared with background mortality records. Estimated results based on the MSWI emissions show: (1) individual risks well below maximum acceptable levels, (2) very small incremental cancer risk compared with background level.     

Low-Cost Filtration System to Treat First-Flush Stormwater

The aim of this paper is to evaluate the performance of the low-flow filtration system (LFFS) that Kogarah Municipal Council developed for treating and reusing the highly polluted first-flush stormwater (FFSW) while allowing the cleaner subsequent major stormwater flows to be directed to the major street drainage. The LFFS was evaluated through laboratory investigations using columns packed with different filter media to test the removal efficiency of pollutants such as zinc (Zn), total phosphorus (TP), total nitrogen (TN), total organic content, total petroleum hydrocarbons (TPH), and turbidity. The findings from this study demonstrate the effectiveness of the LFFS to largely reduce turbidity, TPH, and trace metals from the FFSW. The LFFS also partially removes dissolved organics, TP and TN. These pollutants are more commonly and effectively removed in subsequent processes of a stormwater treatment train. Further this paper highlights the importance of regular maintenance of the LFFS especially as it is only associated in removing the high pollutant loads during a storm event. Due to this first flush, a thick oily crust-formed layer requires monthly removal, and an entire replacement of the exhausted filter media is required quarterly. However considering the labor required to service the crust formed layer within the LFFS, it is more cost effective to replace the entire depth of filter media monthly.     

Pollutant source identification and allocation: Advances in hydrocarbon fingerprinting

Often liability for environmental damage and cleanup of contaminated sites is made difficult, especially with chemically complex environments containing different pollutants, by the inability to differentiate potential sources (or “owners”) of pollutants from each other. As a result, unnecessary costs may be associated with having to assume financial responsibility for alleged contamination of a site. This article reviews the advances in chemical fingerprinting as a tool in identifying and differentiating sources of hydrocarbon pollutants in chemically complex environments. Appropriate hydrocarbon target analytes and required analytical methods for hydrocarbon fingerprinting are discussed, and new interpretative tools are presented that may be applied to contaminated soil, sediment, and groundwater environmental situations. With these analytical and interpretative techniques, an appropriate allocation of chemical contamination and costs at a site can be made.     

Operating problems in anaerobic digestion plants resulting from nitrogen in MSW

Organic waste and municipal solid waste usually contain considerable amounts of different nitrogen compounds, which may inhibit anaerobic degradation processes and cause problems in the downstream and peripheral devices. This refers particularly to the different process stages of anaerobic digestion, to wastewater treatment, and to exhaust air treatment. Neither the knowledge about nitrogen problems nor the technologies for elimination of nitrogen compounds from the wastewater or the exhaust air of anaerobic digestion can be regarded as state-of-the-art. Most of the technologies in question have already been applied in other areas, but are barely tested for application in anaerobic digestion plants. The few performance data and experiences at hand were mainly derived from pilot and demonstration facilities. In this paper, the problem of nitrogen will be discussed in detail according to the separate problem fields based on the authors' experience, as well as on the basis of a review of the relevant literature. Furthermore, possible solutions will be proposed and the need for further research and development will be formulated.     

Developing strategies for managing construction and demolition wastes in Malaysia based on the concept of circular economy

Construction and demolition (C&D) waste is a pressing issue not only in Malaysia, but it is also a worldwide concern including the developed countries as well. C&D waste should be managed throughout the construction cycle. The concept of circular economy (CE) is an emerging notion that has the potential to be utilized as waste minimization approach. This paper aims to assess the potentials of incorporating the CE concept as an approach to minimizing C&D wastes, by developing a CE-based theoretical framework for C&D waste management in Malaysia. In line with this objective, a systematic review has been conducted to determine how CE can be operationalised as a strategy to minimize wastes, while considering it as a key factor for mitigating the environmental impacts. Based on the literature review, a CE-based theoretical framework has been proposed using Malaysia as a case study. The framework has been developed following a three-layer approach namely micro-, meso-, and macro-levels. Waste minimization strategies have been identified for each level taking into account the main stages in the construction industry, i.e., planning, designing, procurement, construction, and demolition. The different stakeholders involved at each stage and their interactions in the stages have also been identified.