Leachability of printed wire boards containing leaded and lead-free solder

Due to environmental concerns and regulatory initiatives, electronics manufacturers are replacing the tin/lead solder commonly used on printed wire boards (PWBs) with alternative solders. To determine the potential waste management impacts of the alternative solders versus the tin/lead solder, two leaching tests on PWBs manufactured with five alternative types of solder were performed: the toxicity characteristic leaching procedure (TCLP) and the synthetic precipitation leaching procedure (SPLP). These tests are commonly used in the US regulatory community to assess pollutant leachability in different disposal scenarios. The article discusses the application and limitations of these tests. The five types of solders investigated were 63Sn/37Pb, 99.3Sn/0.7Cu, 95.5Sn/4Ag/0.5 Cu, 96Sn/2.5Ag/1Bi/0.5Cu, and 42Sn/1Ag/57Bi. The leaching tests were conducted on four PWB sections, each with a unique configuration and solder density. The largest lead concentrations were observed from the PWBs containing Sn/Pb solder, with concentrations exceeding the hazardous waste toxicity characteristic (TC) in TCLP leachates. Silver, the other regulated element used in the solders, was rarely detected, with none of the samples exceeding the TC limit for silver. High copper concentrations were observed and were determined to result from the PWB itself, not from the copper-containing solders.     

The Austrian silver cycle: A material flow analysis

Silver (Ag) is a precious metal of increasing importance. Besides its classical use as a valuable, it is applied in an increasing number of industrial products due to its advantageous chemical properties. As silver is considered a non-renewable resource, it is becoming more and more relevant for individual countries to gain a better understanding of their domestic silver material flows. In our study, a material flow analysis (MFA) of silver in Austria for the period 2012 was carried out, the results of which reveal the major silver flows in the country as well as the imports and exports outside the country. As there is no extraction of silver ore in Austria, the country is depending on silver imports and recycling. Furthermore, the role of the silver coin production that is of considerable importance in Austria is highlighted. The results may help, on a policy level, to determine silver use indicators and support the development of strategies for resource, waste and environmental management of silver. On a modeling level, the results may function as an example for future silver MFA studies in different countries.     

Environmental occurrences, behavior, fate, and ecological effects of nanomaterials: an introduction to the special series

The release of engineered nanomaterials (ENMs) into the biosphere will increase as industries find new and useful ways to utilize these materials. Scientists and engineers are beginning to assess the material properties that determine the fate, transport, and effects of ENMs; however, the potential impacts of released ENMs on organisms, ecosystems, and human health remain largely unknown. This special collection of four review papers and four technical papers identifies many key and emerging knowledge gaps regarding the interactions between nanomaterials and ecosystems. These critical knowledge gaps include the form, route, and mass of nanomaterials entering the environment; the transformations and ultimate fate of nanomaterials in the environment; the transport, distribution, and bioavailability of nanomaterials in environmental media; and the organismal responses to nanomaterial exposure and effects of nanomaterial inputs, on ecological communities and biogeochemical processes at relevant environmental concentrations and forms. This introductory section summarizes the state of knowledge and emerging areas of research needs identified within the special collection. Despite recent progress in understanding the transport, transformations, and fate of ENMs in model environments and organisms, there remains a large need for fundamental information regarding releases, distribution, transformations and persistence, and bioavailability of nanomaterials. Moreover, fate, transport, bioaccumulation, and ecological impacts research is needed using environmentally relevant concentrations and forms of ENMs in real field materials and with a broader range of organisms.     

The contemporary European silver cycle

This paper examines the 1-year anthropogenic stocks and flows of silver as it progresses from extraction to final disposal on the European continent. The primary flows of silver include production, fabrication and manufacturing, use, and waste management. A substance flow analysis (SFA) was used to trace the flows and inventory data, and mass balance equations were used to determine the quantity of flows. The results reveal that Europe has a low level of silver mine production (1580 Mg Ag/year) and instead relies on silver imports and the recycling of scrap in production and fabrication. In the year 1997, Europe imported 1160 Mg Ag of ore concentrate and 2010 Mg Ag of refined silver, and recycled 2750 Mg Ag of new and old scrap. There is a net addition of 3320 Mg Ag/year into silver reservoirs at the use stage. This is the result of a greater amount of silver entering the system from manufacturing than is leaving the system into waste management. The waste flow with the highest content of silver is municipal solid waste, which contains 1180 Mg Ag/year. In total, 62% of all discarded silver is recycled and 38% is sent to landfills. The results of this study and other element and material flow analyses can help guide resource managers, environmental policy makers, and environmental scientists in their efforts to increase material recovery and recycling, address resource sustainability, and ameliorate environmental problems.     

Data search and environmental hazard assessment for post-seveso chemicals

After the serious accident with a chemical industrial plant at Seveso (Italy) in 1976, the Commission of the European Communities has made a directive on major accidents, usually called the Post-Seveso Guideline. In its annex III, a list of 178 substances is given for which potentially dangerous volumes in case of an accident are defined on the basis of human health criteria. For the implementation of environmental criteria, information on toxicity to aquatic organisms, dilution, and physical behavior in water is needed. A literature search for relevant data on these 178 substances revealed aquatic toxicity data for 116 substances, but only for 87 substances sufficient data were available to make a hazard assessment. As an example, the River Rhine was used to calculate the critical quantities that, after a sudden discharge in the Swiss part, could cause damage at the Dutch part some 800 km downstream. In the absence of a common opinion on the criteria for being a major accident and a serious environmental hazard, the impact of different criteria quantities is discussed. If, for example, in the whole River Rhine a mortality of 5% of the aquatic species is chosen as the criterion for damage to the ecosystem, the critical quantities as mentioned in the EEC directive have to be lowered drastically for the majority of the substances. For 18 substances it could be shown that release of the mentioned quantities would be catastrophic for aquatic life in the whole river.     

The role of atmospheric transformations in determining environmental impacts of carbonaceous nanoparticles

In studies that have explored the potential environmental impacts of manufactured nanomaterials, the atmosphere has largely been viewed as an inert setting that acts merely as a route for inhalation exposure. Manufactured nanomaterials will enter the atmosphere during production, use, and disposal, and rather than simply being transported, airborne nanoparticles are in fact subject to physical and chemical transformations that could modify their fate, transport, bioavailability, and toxicity once they deposit to aqueous and terrestrial ecosystems. The objective of this paper is to review the factors affecting carbonaceous nanomaterials' behavior in the environment and to show that atmospheric transformations, often overlooked, have the potential to alter nanoparticles' physical and chemical properties and thus influence their environmental fate and impact. Atmospheric processing of naturally occurring and incidental nanoparticles takes place through coagulation, condensation, and oxidation; these phenomena are expected to affect manufactured nanoparticles as well. It is likely that carbonaceous nanomaterials in the atmosphere will be oxidized, effectively functionalizing them. By influencing size, shape, and surface chemistry, atmospheric transformations have the potential to affect a variety of nanoparticle-environment interactions, including solubility, interaction with natural surfactants, deposition to porous media, and ecotoxicity. Potential directions for future research are suggested to address the current lack of information surrounding atmospheric transformations of engineered nanomaterials.     

Adsorption of trace metals on glass fiber filters

Filters, containing glass-fiber (GF) filter material, are commonly used as the primary filter or as the prefilter in sampling natural waters and laboratory experiments with high concentrations of suspended solids. We observed that GF filter material removed substantial quantities of trace metals from solutions of low ionic strength at near neutral and slightly acidic pH. The GF material sorbed essentially all Pb and Ag from 5-mL aliquots of solutions containing 0.054 and 0.093 mM, respectively. Somewhat less Ni was sorbed from a 0.099 mM solution. This material retained about 43 micromol of Ag per gram of GF material (4600 microg/g). The Ag and Ni sorption was highest at low KNO(3) concentrations (as background electrolyte) and decreased to a constant concentration of sorbed metal at approximately 10 mM KNO(3). Glass-fiber filter material should only be used with careful testing for the elements of concern under conditions that closely match expected environmental or experimental conditions.     

Environmental Exposure of Aquatic and Terrestrial Biota to Triclosan and Triclocarban1

Abstract: The synthetic biocides triclosan (5‐chloro‐2‐(2,4‐dichlorophenoxy)phenol) and triclocarban (3,4,4′‐trichlorocarbanilide) are routinely added to a wide array of antimicrobial personal care products and consumer articles. Both compounds can persist in the environment and exhibit toxicity toward a number of biological receptors. Recent reports of toxicological effects in wildlife, human cell cultures, and laboratory animals have heightened the interest in the occurrence of these biocide and related toxic effects. The present study aimed to summarize published environmental concentrations of biocides and contrast them with toxicity threshold values of susceptible organisms. Environmental occurrences and toxicity threshold values span more than six orders of magnitude in concentration. The highest biocide levels, measured in the mid parts‐per‐million range, were determined to occur in aquatic sediments and in municipal biosolids destined for land application. Crustacea and algae were identified as the most sensitive species, susceptible to adverse effects from biocide exposures in the parts‐per‐trillion range. An overlap of environmental concentrations and toxicity threshold values was noted for these more sensitive organisms, suggesting potential adverse ecological effects in aquatic environments. Affirmative evidence for this is lacking, however, since studies examining environmental occurrences of biocides vis‐à‐vis the health and diversity of aquatic species have not yet been conducted.     

Environmental assessment of packaging: The consumer point of view

When marketing environmentally responsible packaged products, the producer is confronted with consumer beliefs concerning the environmental friendliness of packaging materials. When making environmentally conscious packaging decisions, these consumer beliefs should be taken into account alongside the technical guidelines. Dutch consumer perceptions of the environmental friendliness of packaged products are reported and compared with the results of a life-cycle analysis assessment. It is shown that consumers judge environmental friendliness mainly from material and returnability. Furthermore, the consumer perception of the environmental friendliness of packaging material is based on the postconsumption waste, whereas the environmental effects of production are ignored. From the consumer beliefs concerning environmental friendliness implications are deduced for packaging policy and for environmental policy.     

Response to environmental flows in the lower Tarim River, Xinjiang, China: ground water

In China's west since the 1950s large-scale ecosystem degeneration has occurred through water diversions for agricultural purposes. Since 2000, 1038 x 10(6) m(3) of water have been released into the Tarim River with the result that water reached the terminal Taitema Lake for the first time in 30 years. This environmental flow raised water-table levels along 350 km of the river. To assess the response of the water-table, a comparison "pristine" site is compared with downstream monitored sites. The results show huge changes in water-table levels. The study verifies that the water-table is extremely responsive to environmental flows, that strong internal similarities exist along the length of the river, and that the effect on the water-table and hence likely riparian vegetation recovery can be tentatively predicted. The actual impacts of the restoration strategy are less than those originally expected politically, socially and within the scientific community. We make recommendations on more effective release strategies.     

Formulation of criteria for pollution control on cement products produced from solid wastes in China

The process of producing cement products from solid waste can increase the level of pollutants in the cement products. Therefore, it is very important to establish a pollution control standard for cement products to protect the environment and human health. This paper presents acceptance limits for the availability of heavy metals in cement products which have been produced from solid wastes and explains how the limits have been calculated. The approach and method used to formulate these criteria were based on EN 12920. The typical exposure scenarios used in this paper involve concrete being used for drinking water supply pipelines and concrete pavements and are based on an analysis of typical applications of cement in China, and the potential for contact with water. The parameters of a tank test which was based on NEN 7375 were set in accordance with the environmental conditions of typical scenarios in China. Mechanisms controlling the release of heavy metals in concrete and a model for that release were obtained using the leaching test. Finally, based on acceptance criteria for drinking water and groundwater quality in China, limit values for the availability of heavy metals in concrete were calculated.     

Influence of flooding on phosphorus mobility in manure-impacted soil

Agricultural lands are often used for constructing stormwater treatment areas (STAs) to abate nutrient loading to adjacent aquatic systems. Flooding agricultural lands to create STAs could stimulate a significant release of phosphorus (P) from soil to the water column. To assess the suitability of agricultural lands, specifically those impacted by animal operations, for the construction of STAs, soils from different components of the New Palm-Newcomer dairies (Nubbin Slough Basin, Okeechobee, Florida, USA) were collected by horizon and their P retention and release capacities estimated. In general, P released from A-horizon soil under flooded (anaerobic) conditions was greater than under drained (aerobic) conditions due to redox effect on iron (Fe) and consequent P releases. However, the P released from Bh-horizon soil was greater under aerobic conditions than under anaerobic conditions, possibly due to excessive aluminum (Al) content in the horizon. Double acid-extractable calcium (Ca), magnesium (Mg), Al, and P explained 87% of the variability in P release under aerobic conditions, and 80% of that under anaerobic conditions. The P release maxima indicated a high solubility of P in A-horizon soil from both active and abandoned dairies (13 and 8% of the total P, respectively), suggesting that these soils could function as potential sources of P to the overlying water column when used in STA construction. Preestablishment of vegetative communities or chemical amendment, however, could ameliorate high P flux from soil to the water column.     

Occurrence and fate of the phytotoxin juglone in alley soils under black walnut trees

Juglone (5-hydroxy-1,4-napthoquinone) is a chemical released by walnut trees, which can be toxic at various levels to several plant species. A balance among competing source and sink mechanisms and rates will ultimately determine whether juglone is capable of attaining sufficient levels to be allelopathic to intercrops in a walnut tree agroforestry system. In this study, juglone's release, accumulation, and decline in soil are explored using data from soil beneath a black walnut tree (Juglans nigra L) alley cropping system, greenhouse pot studies, and laboratory sorption/degradation studies. Juglone pore water concentrations estimated from extracts of surficial soil from beneath the alley cropping system exceeded the lowest solution culture toxicity levels reported for some plants of 10(-7) M, but did not exceed the inhibition threshold reported for typical intercrops such as maize and soybeans 10(-5) M. Further assessment of the likely persistence of juglone in soils indicated that juglone is both microbially and abiotically degraded, and that it will be particularly short-lived in soils supporting microbial activity. However, walnut seedlings planted in sand-filled pots clearly showed that juglone is released in measurable quantities to the soil's rhizosphere. Therefore, juglone accumulation in low fertility soils is plausible, and may still be worthy of consideration in management of alley agroforestry systems.     

California households' willingness to pay for ‘green’ electronics

Concerns about rapid increases in the volume of electronic waste (e-waste) and its potential toxicity have sharpened policy makers' interest for extended producer responsibility to encourage manufacturers of consumer electronic devices (CEDs) to ‘design for the environment’. This paper examines consumer willingness to pay for ‘green’ electronics based on a 2004 mail survey of California households. Using ordered logit models, it was found that significant predictors of willingness to pay for ‘greener’ computers and cell phones include age, income, education, beliefs about the role of government for improving environmental quality, as well as environmental attitudes and behaviors, but neither gender nor political affiliation. Although most respondents are willing to pay only a 1% premium for ‘greener’ CEDs, innovation and EU directives may soon make them competitive with conventional CEDs.     

An intergrated waste survey and environmental effects of COGIDO, a bleached pulp and paper mill in Vietnam, on the receiving waterbody

An integrated investigation on wastewater characterization and the environmental effects from the COGIDO pulp and paper mill in Bien Hoa Industrial Estate, Vietnam, a chlorine bleached soda integrated pulp and paper mill operating without a chemical recovery system, on the receiving water body was conducted during the rainy and dry seasons in 1993 and 1995. The pollution load from the mill was very high in terms of BOD, COD and SS (COD_m: 58.7 t/d; BOD: 33.3 t/d and SS: 25.1 t/d). The effluent toxicity was determined using four toxicity tests: the green micro-alga, Selenastrum capricornutum, Microtox (marine bacteria: Photobacterium phosphoreum), the duckweed, Lemna aequinoctialis, and fish (silver barb: Puntius gonionotus, and Tilapia: Tilapia nilotica). Selenastrum capricornutum was the most sensitive among the tested organisms. The mill toxicity emission rate (TER) was as high as 338 610 (Selenastrum test). The bleaching-pulp and semi-chemical pulp plants which contributed the largest pollution load to the total COGIDO effluent, therefore, were targeted for abatement measures. Physico-chemical parameters as well as qualitative and quantitative aquatic organism composition for the river water were established. The BOD₅ and COD values exceeded the potable surface water standard by a factor of 2 to 4. The species diversity and abundance of the phytoplankton, zooplankton and zoobenthos were found to be lower (20–40%) than that of unpolluted rivers in Vietnam, whereas pollution-indicator species increased up to four times during the dry season 1995.     

ENVIRONMENTAL IMPACT ASSESSMENT OF TAILINGS DISPERSAL FROM A URANIUM MINE USING TOXICITY TESTING PROTOCOLS1

ABSTRACT: Toxicity testing is a means of establishing the environmental risk of a uranium tailings release. It is valuable in designing tailings containment structures because it assists in setting acceptable levels of risk for the design. This paper presents details of toxicity tests of the tailings from Ranger Uranium Mine, Northern Territory, Australia. The results suggest that the non-radiological toxicity of the tailings is low. The environmental risk of a tailings release is more likely to be related to the physical impacts of the tailings, including infilling of billabongs and changes in the sedimentology of riparian ecosystems rather than their biogeochemical impact. Two major results were: (1) water from treatment with washed tailing fines were not toxic to Hydra viridissima, and (2) mixtures of washed tailings fines and natural floodplain sediment (overlying water or elutriates) were not toxic to Hydra viridissima or Moinodaphnia macleayi.     

Environmental monitoring at Hanford,Washington, USA: A brief site history and summary of recent results

Nuclear and nonnuclear industrial and research activities have been conducted on the Hanford reservation since 1943. Materials originating from these activities may enter the surrounding environment through releases of airborne and liquid effluents and solid wastes. Concern about the environmental effects of these releases has evolved over the past four decades into a comprehensive onsite and offsite monitoring program. Today, environmental monitoring to assess potential impacts of released materials includes field sampling and chemical and physical analyses of air, ground and surface water, fish and wildlife, soil, vegetation, and foodstuffs. This paper reviews the history of Hanford operations and summarizes the current environmental monitoring program and its major findings. Mathematical models based on monitoring data show that radiation doses to people living near the Hanford site are well below existing regulatory standards. Only trace amounts of radionuclides from Hanford have been detected in the offsite environment.     

PRELIMINARY STUDIES IN THE TERRESTRIAL DISPOSITION OF SILVER FROM CLOUD SEEDING1

ABSTRACT. Silver iodide is currently the most favored cloud seeding material in weather modification projects. While the literature indicates that its ecological effects are likely to be insignificant, its disposition in the terrestrial ecosystem after snow melt has not been adequately studied. Silver levels in soil, plant and litter material are being monitored twice a year on a mountainous area in southwestern Colorado, to determine whether annual accretion from cloud seeding can be measured with current techniques and whether significant changes in silver concentration take place in grass, aspen, and spruce communities. One AgI generator site is also being monitored. Comparison of silver concentrations in terrestrial components of the target area indicates no measurable increase after the first winter's seeding. On an ash basis, spruce foliage and litter contain about four times as much silver as soil. On a dry weight basis, soil from all three plant communities contains about six times as much silver as foliage. Consistent increases in silver concentration were found in soil and pine foliage within 200 meters of one generator site.     

Metal Contamination in the Republic of Armenia

/ Air, soil, and water samples were collected throughout the Republic of Armenia both before and after its independence from the Soviet Union in 1991. Reported analyses of those samples indicated that levels of several trace metal concentrations (Ag, Cd, Cr, Cu, Mo, Ni, Pb, Ti, and Zn) exceeded the maximum allowable concentrations established by the former Soviet Union (FSU) and subsequently adopted by Armenia. Although industrial production has declined by more than 80% since the 1980s, the economy is improving and there is potential for a significant increase in the generation of industrial metal emissions. These include automobile emissions, which are now considered to be the primary source of atmospheric lead. Historically, the Soviet Union did not strictly enforce environmental standards, and Armenia is now faced with the resulting environmental problems and the associated risks to public health. Since some trace metal concentrations may be at or near potentially toxic levels, there is a need to accurately assess the extent of metal contamination in order to devise cleanup plans and develop long-term environmental protection and public health strategies in Armenia.     

生活生产类产品VOCs含量限值法规与标准研究

本文对国内生活生产类产品VOCs含量限值的国家标准、地方标准、行业标准以及中国香港、欧美等发达地区精细化的生活生产类产品VOCs含量限值法规和标准做了比较全面的综述,并从产品限值种类以及限值要求两个方面进行了对比研究和分析,提出了我国生产生活类产品VOCs 含量限值法规标准制定建议。笔者认为,应借鉴发达国家成功的生活生产类产品VOCs含量限值法规及标准制定经验,从做好标准和产品技术要求衔接、建立区域协同制定标准模式、结合经济因素或环境空气质量,分步推进相关标准制定和发布等方面入手,建立符合实际国情的产品种类较为全面、标准要求较高的生产生活类产品VOCs含量限值法规与标准体系,尤其是生活消费品方面,减少直接与人体接触的生活消费品VOCs排放。