Distribution of polychlorinated biphenyls in the Fort Edward,New York,water system

Levels of polychlorinated biphenyls (PCBs) have been determined in the water, in the soils and sediments, and in the biota of a small upstate New York public water supply system, which is near the heavily polluted section of the Hudson River and a disposal site for PCB-containing waste. The impounded water exhibits a significant and relatively uniform level of Aroclor 1016, whereas the ground and surface waters supplying the reservoir do not. Rainfall, which exhibits a high level of Aroclor 1016, constitutes a small but significant source of PCB input. Soil and sediment samples exhibit significant median levels of both Aroclor 1016 and Aroclor 1254, but the local concentrations vary widely. The biota exhibit much higher PCB levels than the water or sediments, and show a strong preference for Aroclor 1254. The PCB levels in the macroinvertebrates are particularly high, suggesting that these organisms may provide a useful indicator for monitoring PCB contamination in aquatic systems. Risk assessment indicates that the lifetime incremental risk of cancer associated with the drinking water is below 10^–6. Management of such low levels of PCB contamination is best achieved by reducing the input of PCBs.     

Forest fertilization with wood ash: effect on the distribution and storage of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs)

Before wood ash can be safely used as a fertilizer in forests, possible negative effects such as input of organic contaminants or remobilization of contaminants already stored in the soil must be investigated. The objective of this study was to examine the effects of wood ash application on concentrations, storage, and distribution of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) in a Swiss forest soil. In May 1998, we added 8 Mg wood ash ha(-1) to a forest soil. We determined 20 PAHs and 14 PCBs in the organic layer, in the bulk mineral soil, and in soil material taken from preferential flow paths and from the matrix before and after the wood ash application. In the control plots, the concentrations of PAHs in the organic layer indicated moderate pollution (sum of 20 PAHs: 0.8-1.6 mg kg(-1)), but sum of PCB concentrations was high (21-48 microLg kg(-1)). The wood ash had high concentrations of PAHs (sum of 20 PAHs: 16.8 mg kg(-1)), but low concentrations of PCBs (sum of 14 PCBs: 3.4 microg kg(-1)). The wood ash application increased the PAH concentrations in the organic horizons up to sixfold. In contrast, PCB concentrations did not change in the Oa horizon and decreased up to one third in the Oi and Oe horizons. The decrease was probably caused by the mobilization of stored PCBs because of the high pH of the wood ash. This probably results in a higher mobility of dissolved organic matter, acting as PCB carrier. In the mineral soil, the preferential flow paths of the A horizon contained more PAHs and PCBs (+20 +/- 15% and +43 +/- 60%, respectively) than the matrix. This was particularly true for higher molecular weight compounds (molecular weight > 200 g mol(-1)). Below 50 cm depth, concentrations of PAHs and PCBs were smaller in the preferential flow paths, suggesting that in deeper depths, processes acting as sinks dominated over inputs in the preferential flow paths.     

Spatial and temporal distribution of polychlorinated biphenyl (PCB) concentrations in soils of an industrialized city in Turkey

Surface soil (0-5 cm) samples from 43 sampling sites covering the entire urban territory of Bursa, an industrialized city in Turkey, were collected in each season and analyzed for 83 polychlorinated biphenyls (PCBs). The mean concentration of total PCBs (Σ83 PCBs) among all sites over the four seasons was 2121.51 pg/g dry weight (dw), with a range of 207.61-5461.95 pg/g dw. Total PCB concentrations in the soil samples collected near an industrial region were the highest in all seasons. In general, PCB patterns were dominated by low-chlorinated homologue groups (≤ 5 Cl groups at a 79% level). The predominant homologue group found in Bursa city soils was the penta-CBs (29.1%) followed by the tetra-CBs (25.5%) and tri-CBs (17.6%). A total of seven dioxin-like PCB congeners (CB-77, 81, 105, 114, 118, 123, and 126) were found in every sampling location and their mean total concentration for all locations and seasons was 259.27 pg/g dw, with a range of 7.02-1581.13 pg/g dw. A significant relationship (r = 0.77, p < 0.01) was found between the concentrations of dioxin-like PCBs and the seasonal average sum of PCB concentrations. A correlation between light congeners (相似文献   

Phytoextraction and uptake patterns of weathered polychlorinated biphenyl-contaminated soils using three perennial weed species

Three promising phytoextracting perennial weed species [ L. (ox-eye daisy), L. (curly dock), and L. (Canada goldenrod)] were planted in monoculture plots at two polychlorinated biphenyl (PCB)-contaminated sites in southern Ontario and followed over 2 yr to investigate the effects of plant age, contaminant characteristics, and species-specific properties on PCB uptake and accumulation patterns in plant tissues. Results from this study indicate that, for each of these weed species, shoot contaminant concentrations and total biomass are dependent on plant age and life cycle (vegetative and reproductive stages), which affects the total amount of PCBs phytoextracted on a per-plant basis. Even at suboptimal planting densities of 3 to 5 plants m, all three weed species extracted a greater quantity of PCBs per unit area (4800-10,000 μg m) than the known PCB-accumulator L. ssp (cv Howden pumpkins) (1500-2100 μg m) at one of the two sites. Calculated PCB extractions based on theoretical optimal planting densities were significantly higher at both sites and illustrate the potential of these weeds for site remediation. This study also demonstrates that plants may accumulate PCBs along the stem length in a similar manner as plants.     

A pilot-plant study for destruction of PCBs in contaminated soils using fluidized bed combustion technology

Destruction of polychlorinated biphenyls (PCBs) in contaminated soils and wastes using circulating fluidized bed combustion (CFBC) technology was studied using a pilot plant and simulated waste material. The results show that the technology is effective and particularly promising for treatment of PCB-containing materials like the toxic sludge from a large contaminated site. Destruction of the toxics in the gas phase appears to be very fast, and over 99.9999% destruction and removal efficiency can be achieved in the temperature range 875-880 degrees C. Heat transfer in the fluidized bed also appears adequate. Toxic residues in treated soil can be reduced to very low levels. Rate-controlling factors of the decontamination process are analyzed, and key issues for determination of the process conditions are discussed.     

Activated carbon immobilizes residual polychlorinated biphenyls in weathered contaminated soil

Activated carbon (AC) has recently been shown to be effective in sequestering persistent organic pollutants (POPs) from aquatic sediments. Most studies have demonstrated significant reductions of POP concentrations in water and in aquatic organisms; however, limited data exist on the possibility of using AC to immobilize remaining POPs at terrestrial contaminated sites. Under greenhouse conditions, pumpkin ssp cv. Howden) were grown, and red wiggler worms () were exposed to an industrial contaminated soil containing a mixture of polychlorinated biphenyls (PCBs), i.e., Aroclors 1254 and 1260) treated with one of four concentrations of AC (0.2, 0.8, 3.1, and 12.5%) for 2 mo. The addition of AC to contaminated soils virtually eliminated the bioavailability of PCBs to the plant and invertebrate species. There were reductions in PCB concentrations of more than 67% in ssp and 95% in . These data suggest that AC could be included as part of comprehensive site closure strategy at PCB-contaminated sites.     

Phytoremediation of polychlorinated biphenyl (PCB)-contaminated sediment: a greenhouse feasibility study

Contaminated sediments dredged from navigable waterways often are placed in confined disposal facilities to prevent further spread of the pollutants. Reducing contaminants to acceptable levels would allow for disposal of the sediments and further dredging activity. A greenhouse study was conducted to evaluate plant treatments and the addition of an organic amendment to decrease the concentration of PCB congeners found in Arochlor 1260. Sediment treated with the amendment and either low transpiring plants or no plants had the greatest removal of the PCB congeners. High-transpiring plants apparently prevented the highly reducing conditions required for reductive dechlorination of highly chlorinated PCBs. Most likely, the amendment provided labile carbon that initiated the reducing conditions needed for dechlorination. The sediment moisture content and moisture-related plant parameters were significant predictors of the PCB loss. Carex aquatalis and Spartina pectinata are predicted to be the most effective plant treatments for phytoremediation of PCBs.     

A washing procedure to mobilize mixed contaminants from soil: I. Polychlorinated biphenyl compounds

We conducted a laboratory study to assess the feasibility of a washing process with nonionic and anionic surfactants in combination with ethylenediaminetetraacetate (EDTA) for the simultaneous mobilization of heavy metals and polychlorinated biphenyls (PCBs) from a field-contaminated soil. Unit processes consisting of complexometric extraction and surfactant-assisted mobilization were combined with reagent regeneration and detoxification steps to generate innocuous products. Ten minutes of ultrasonic mixing of the soil with a combination of 30 mL L(-1) surfactant suspension and a sparing quantity (2 mmol) of EDTA mobilized appreciable quantities of PCBs, virtually all of the available Cd, Cu, Mn, and Pb, and lesser amounts of the Zn, Ni, and Cr but only small quantities of Al and Fe. Relative to individual reagents, combinations of surfactant (Brij 98, Triton X-301, or Triton XQS-20) with EDTA did not influence PCB extraction efficiencies perceptibly. Of the three surfactants, the Brij 98 proved to be the most efficient for three successive extractions with a single charge, mobilizing 83% of the PCBs, whereas companion extractions that used fresh reagent each time mobilized 87% of the soil PCB content. The decreased PCB mobilization with the same quantity of anionic surfactant (71 or 68%) resulted from losses during the EDTA regeneration process with zero-valent Mg. In toto, these studies demonstrate that PCB compounds and selected heavy metals can be coextracted efficiently from soil with three successive washes with the same washing suspension containing EDTA and a nonionic surfactant.     

环境中多氯联苯（PCBs）的分析方法研究

探讨了环境中多氯联苯（PCBs）来源特性和分析检测方法。讨论了目前较为常用的样品前处理方法,如溶剂萃取法、固相萃取法、固相微萃取法等,常见的检测方法包括化学分析法和生物分析法,并对PCBs分析检测的发展前景进行了展望。     

Biocontainment of polychlorinated biphenyls (PCBs) on flat concrete surfaces by microbial carbonate precipitation

In this study, a biosealant obtained from microbial carbonate precipitation (MCP) was evaluated as an alternative to an epoxy-coating system. A bacterium Sporosarcina pasteurii strain ATCC 11859, which metabolizes urea and precipitates calcite in a calcium-rich environment, was used in this study to generate the biosealant on a PCB-contaminated concrete surface. Concrete cylinders measuring 3 in (76.2 mm) by 6 in (152.4 mm) were made in accordance with ASTM C33 and C192 and used for this purpose. The PCB, urea, Ca(2+), and bacterial cell concentrations were set at 10 ppm, 666 mM, 250 mM, and about 2.1 × 10(8) cells mL(-1), respectively. The results indicate that the biosealed surfaces reduced water permeability by 1-5 orders of magnitude, and had a high resistance to carbonation. Since the MCP biosealant is thermally stable under temperatures of up to 840 °C, the high temperatures that normally exist in the surrounding equipment, which may contain PCB-based fluids, have no effect on the biosealed surfaces. Consequently, there is greater potential to obtain a stronger, coherent, and durable surface by MCP. No measurable amount of PCBs was detected in the permeating water, indicating that the leaching water, if any, will have a minimum impact on the surrounding environment.     

印刷线路板在复合环境下的腐蚀

印刷线路板几乎会出现在每一种电子设备当中,它是以绝缘材料辅以导体配线所形成的结构元件。印刷线路板的腐蚀形式符合大气腐蚀的基本规律,但又有自己的特点。本文概述了印刷线路板在气体污染物、灰尘、潮湿、高温等多因素复合环境条件下的失效形式及腐蚀机理,其主要的腐蚀形式是:电偶腐蚀、电解腐蚀和缝隙腐蚀;文中还简单总结了印刷线路板腐蚀的主要影响因素,其主要的影响因素是:湿度、温度、腐蚀性气体和固态污染物等。     

浅析PCB企业的绿色管理

本文从绿色管理的角度，对如何实施印刷电路板（PCB）企业的绿色管理进行了一些初步探讨，强调了实施绿色管理是PCB企业可持续发展的必由之路。     

青岛市挥发性有机物排放清单及重点行业排放特征研究

根据收集的青岛市九大类排放源的活动水平数据,本研究采用排放因子法结合调研实测等工作建立了青岛市VOCs源排放清单,结果表明,工业企业VOCs排放占总排放的比例达到43.17%。其中,工艺过程源类中排放占比较高的行业依次为橡胶和塑料制品业、非金属矿物制品业、原油加工及石油制品制造业、化学原料和化学制品制造业、黑色金属冶炼和压延加工业等;溶剂使用源类中排放占比较高的行业为金属制品业、皮革皮毛羽毛制品和制鞋业、印刷业、铁路船舶航空等设备制造业、汽车制造业等。通过对重点行业重点企业进行入场调研采样分析,本研究发现不同行业中VOCs组成特征有差异,多数行业VOCs物种排放以卤代烃、芳香烃、烷烃等为主,纺织印染业、制鞋业等部分行业以含氧有机物排放为主。通过调研和实测对部分行业的VOCs排放因子水平做了本地化深入研究,调研统计青岛市约49%的企业安装了VOCs治理设施;在企业所安装的VOCs治理设施中吸附法占比最大,占比为26%。     

Pleasure Boatyard Soils are Often Highly Contaminated

The contamination in pleasure boatyards has been investigated. Measured concentrations of copper, zinc, lead, mercury, cadmium, tributyltin (TBT), the 16 most common polycyclic aromatic hydrocarbons (∑16 PAHs), and the seven most common polychlorinated biphenyls (∑7 PCBs) from investigations at 34 boatyards along the Swedish coast have been compiled. The maximum concentrations were 7,700 for Cu, 10,200, for Zn, 40,100 for Pb, 188 for Hg, 18 for Cd, 107 for TBT, 630 for carcinogenic PAHs, 1,480 for ∑16 PAHs, and 3.8 mg/kg DW for ∑7 PCB; all 10–2,000 higher than the Swedish environmental qualitative guidelines. In addition, the mean of the median values found at the 34 places shows that the lower guidance value for sensitive use of land was exceeded for the ∑7 PCBs, carcinogenic PAHs, TBT, Pb, Hg, and Cu by a factor of 380, 6.8, 3.6, 2.9, 2.2 and 1.7, respectively. The even higher guideline value for industrial use was exceeded for the ∑7 PCBs and TBT by a factor of 15 and 1.8, respectively. TBT, PAHs, Pb, Cd, and Hg are prioritized substances in the European Water Framework Directive and should be phased out as quickly as possible. Because of the risk of leakage from boatyards, precautions should be taken. The high concentrations measured are considered to be dangerous for the environment and human health and highlight the urgent need for developing and enforcing pleasure boat maintenance guidelines to minimize further soil and nearby water contamination.     

SEMIPERMEABLE MEMBRANE DEVICES USED TO ESTIMATE BIOCONCENTRATION OF POLYCHLORINATED BIPHENYLS1

ABSTRACT: Aquatic organisms passively accumulate hydrophobic organic compounds, such as polychlorinated biphenyls, even when ambient water concentrations of the contaminant are below analytical detection limits. However, contaminant concentrations in tissue samples are subject to an inherently high level of variability due to differences in species, life stage, and gender bioconcentration potentials. Semipermeable membrane devices (SPMDs) were used to sample Aroclor 1254, a mixture of readily bioconcentrated polychlorinated biphenyls (PCBs), in a contaminated wetland near Flat Top, WV. The devices consisted of triolein, a lipid found in fish, enclosed in a polyethylene membrane. SPMDs were deployed in the water column and in direct contact with wetland sediments along a previously identified concentration gradient of PCBs. The devices were retrieved after a 25-day exposure period. Analytes were recovered by dialyzing the devices in nanograde hexane. Hexane dialysates were condensed and analyzed by gas chromatography. All deployed devices sequestered quantifiable amounts of Aroclor 1254. Water-column SPMDs accumulated PCBs far in excess of ambient water concentrations. The devices contacting sediments accumulated PCBs at all sites, though accumulated concentrations did not exceed concentrations in sediment. Patterns of PCB concentration in the devices corresponded to the identified gradient at the site. Results from the water-column SPMDs were used to estimate the concentration of the dissolved, bioavailable fraction of PCBs present in the water column. These concentrations ranged from 0.01 to 0.09 μg/L of bioavailable Aroclor 1254.     

Allocating anthropogenic pollutant emissions over space: application to ozone pollution management

An inventory of volatile organic compound (VOC) and nitrogen oxides (NOx) emissions is an important tool for the management of ground-level ozone pollution. This paper has two broad aims: it illustrates the potential of a geographic information system (GIS) for enhancing an existing spatially-aggregated, anthropogenic emissions inventory (EI) for Tucson, AZ, and it discusses the ozone-specific management implications of the resulting spatially-disaggregated EI. The main GIS-related methods include calculating emissions for specific features, spatially disaggregating region-wide emissions totals for area sources, and adding emissions from various point sources. In addition, temporal allocation factors enable the addition of a multi-temporal component to the inventory. The resulting inventory reveals that on-road motor vehicles account for approximately 50% of VOC and NOx emissions annually. On-road motor vehicles and residential wood combustion are the largest VOC sources in the summer and winter months, respectively. On-road motor vehicles are always the largest NOx sources. The most noticeable weekday vs. weekend VOC emissions differences are triggered by increased residential wood combustion and increased lawn and garden equipment use on weekends. Concerning the EI's uncertainties and errors, on-road mobile, construction equipment, and lawn and garden equipment are identified as sources in the most need of further investigation. Overall, the EIs spatial component increases its utility as a management tool, which might involve visualization-driven analyses and air quality modeling.     

Present status of the recycling of waste electrical and electronic equipment in Korea

In Korea due to rapid economical growth followed by urbanisation, breakage of large traditional families into small nuclear families, continuous changes in equipment features and capabilities causes tremendous increase in sale of new electrical and electronic equipment (EEE) and decrease in sale of used EEE. Subsequently, the ever-increasing quantity of waste electrical and electronic equipment (WEEE) has become a serious social problem and threat to the environment. Therefore, the gradual increase in the generation of WEEE intensifies the interest for recycling to conserve the resources and protect the environment. In view of the above, a review has been made related to the present status of the recycling of waste electrical and electronic equipment in Korea. This paper describes the present status of generation and recycling of waste electrical and electronic equipment, namely TVs, refrigerators, washing machines, air conditioners, personal computers and mobile phones in Korea. The commercial processes and the status of developing new technologies for the recycling of metallic values from waste printed circuit boards (PCBs) is also described briefly. Since 1998, three recycling centers are in full operation to recycle WEEE such as refrigerators, washing machines and air conditioners, having the total capacity of 880,000 units/year. All waste TVs are recently recycled on commission basis by several private recycling plants. The recycling of waste personal computers and mobile phones is insignificant in comparison with the amount of estimated obsolete those. Korea has adopted and enforced the extended producer responsibility (EPR) system. Korea is making consistent efforts to improve the recycling rate to the standards indicated in the EU directives for WEEE. Especially environmentally friendly and energy-saving technologies are being developed to recycle metal values from PCBs of WEEE.     

通信及控制系统设备中的电磁兼容设计方法

本文介绍通信及控制系统设备的电磁兼容设计方法;包括电路设计、印制板设计、设备内部走线设计、屏蔽设计、滤波及接地设计等的电磁兼容设计。     

A washing procedure to mobilize mixed contaminants from soil: II. Heavy metals

We conducted a laboratory study to assess the efficiency of nonionic and anionic surfactants in combination with a sparing quantity of ethylenediaminetetraacetate (EDTA) to simultaneously extract heavy metals (HMs) and polychlorinated biphenyl (PCB) compounds from a field-contaminated soil. A soil wash that mobilized both HMs and PCBs was combined with back-extraction with hexane to remove PCBs from the aqueous wash. The aqueous washing suspension was then regenerated by precipitation of the HMs induced by corrosion and hydrolysis of zero-valent Mg to provide a cleaned soil and innocuous extract. Finally, the washing suspension was recycled twice to mobilize more contaminants from the soil particulate fraction. After ultrasonic equilibration, EDTA in admixture with a nonionic surfactant did not appreciably change the efficiency of mobilization of most heavy metals (Al, Cd, Cr, Fe Mn, Ni, and Zn), but did increase the recovery of Cu and Pb. The release of EDTA from HM complexes was efficient for most metals (99%) but was influenced by the chemical characteristics of the surfactant. The EDTA recovery (62-65%) after three cycles of soil washing, hexane back-extraction, and Mg(0) treatment was similar for all reagent combinations. In toto, these studies demonstrate that after treatment with ultrasound, selected heavy metals can be coextracted efficiently from soil with a single washing suspension containing EDTA and a nonionic surfactant.     

Test of a Model to Assess the Condition of Lodgepole Pine Stands

/ A predictive model for assessing stand condition as a function of suitability for achieving specified management objectives was originally developed using a data set for only 28 stands. In this study, we evaluate the model using an operational-sized data set composed of currently collected stand inventory data for 238 stands in the Snowy Range of the Medicine Bow National Forest in southern Wyoming. We compared its predictions of old growth suitability to results of a separate special old growth survey. Stands were characterized as profiles of variables derived from stand inventory data, and plotted as points in two-dimensional space where similarity between stands was reflected by the distance between their points. Results suggest the model is useful for classifying stand condition using relatively large sets of data currently collected during routine stand inventories.