EG填充无卤阻燃型LDPE复合薄膜阻燃性能研究

为了改善聚合物低密度聚乙烯(LDPE)薄膜的阻燃性能,通过向其中添加膨胀型阻燃剂聚磷酸铵(APP)/季戊四醇(PER)和可膨胀石墨(EG),制备了无卤阻燃型低密度聚乙烯复合薄膜.实验研究了膨胀阻燃剂填充聚合物LDPE作为阻燃复合薄膜的性能,分析了膨胀阻燃剂的加入对复合膜阻燃性能、残重率和力学性能的影响机理.研究发现,该新型配方中的EG和APP/PER对复合薄膜的阻燃性能具有协同作用,当配方中APP/PER/EG的填充量达到30%质量分数(APP∶PER∶EG∶LDPE质量比16∶8∶6∶100)时,薄膜材料的氧指数可达到27.5%;与纯LDPE薄膜相比,阻燃薄膜的氧指数提高了10.3%,改善了阻燃效果.     

微胶囊化红磷增效氢氧化镁阻燃聚乙烯的燃烧特性

探讨了微胶囊化红磷（MRP）在氢氧化镁（MH）阻燃低密度聚乙烯（LDPE）中的阻燃增效作用,用氧指数和锥型量热计研究了MRP/MH的不同配比对其氧指数、热释放速率、发烟量等燃烧性能参数的影响。试验结果表明在LDPE/MH体系中添加适量的MRP可以有效地提高材料的氧指数,进一步降低材料的热释放速率,延长材料的着火时间,但是材料的发烟量有所增加。从热失重实验结果可以看出,在LDPE/MH体系中添加MRP不仅大大提高材料的初始分解温度,而且具有较好的成炭作用。     

赤泥及其复配体系阻燃聚乙烯的研究

采用X射线光电子能谱、热失重分析法及粒度分析法研究了拜耳法赤泥表面的元素组成、热稳定性及粒度分布;采用复配协同阻燃的方法,将拜耳法赤泥分别与微胶囊红磷、聚磷酸铵、硼酸锌、氢氧化镁等阻燃剂复配,研究了赤泥复配阻燃剂用于聚乙烯的阻燃效果.研究表明,拜耳法赤泥表面含有铝、硅、磷及氮等多种阻燃元素,热稳定性及粒度均可满足阻燃塑料的基本要求, 质量分数为50%的拜耳法赤泥阻燃聚乙烯的氧指数为20.8%.在增容剂接枝马来酸酐聚乙烯存在下,赤泥复配阻燃聚乙烯的氧指数达到了30.3%, 力学性能基本满足应用需求.     

MPP协同MF@ADP阻燃低密度聚乙烯性能研究*

为提高低密度聚乙烯（LDPE）阻燃性能和阻燃LDPE复合材料的力学性能与抑烟性能,采用原位聚合法制备三聚氰胺-甲醛（MF）树脂包覆二乙基次磷酸铝（ADP）的MF@ADP微胶囊,再引入三聚氰胺聚磷酸（MPP）与MF@ADP进行协效复配,熔融共混制备阻燃LDPE复合材料。通过氧指数、热重分析、力学测试和烟密度测试等研究复合材料的阻燃、力学和抑烟性能。研究结果表明:MF@ADP微胶囊能改善阻燃剂与复合材料之间的相容性,与MPP复配构成的磷-氮膨胀阻燃体系能有效提高LDPE的抑烟性能;当MF@ADP∶MPP的质量比为2∶1时,材料的LOI达到了30.6%,垂直燃烧测试达到UL-94 V0级,拉伸强度为11.8 MPa,且形成的P/N/O高聚物炭层稳定性更高,可减少LDPE燃烧释放的烟雾量。     

聚磷腈/氢氧化镁协同阻燃聚丙烯的研究

为改善氢氧化镁阻燃聚丙烯的力学和阻燃性能,合成一种新型氢氧化镁协同阻燃试剂聚二(乙醇)磷腈,并制备聚磷腈/氢氧化镁复合阻燃材料。用红外光谱(IR)和氢核磁共振仪(H-NMR)研究阻燃剂聚二(乙醇)磷腈的化学结构,并利用扫描电子显微镜(SEM)、电子万能试验机和氧指数测定仪,研究聚磷腈/氢氧化镁复合阻燃材料添加量对聚丙烯的结构、力学性能和阻燃性能的影响。研究结果表明:这种复合阻燃材料具有较好的阻燃效果,且能使聚丙烯力学性能有一定程度的提高。这些结果主要归功于聚磷腈不仅起到协同阻燃作用,而且还作为氢氧化镁的分散剂,提高了氢氧化镁粒子在聚丙烯中的分散度及界面结合力。     

金属氧化物对赤泥复配阻燃聚乙烯协效作用的研究

为了提高由拜耳法赤泥、红磷、硼酸锌、氢氧化铝组成的赤泥复配阻燃剂的阻燃效率,采用金属氧化物作为协效剂,研究了ZnO、Ni2O3、TiO2分别在赤泥复配阻燃聚乙烯中的协效作用.结果表明,ZnO的协效作用最好.在60%(质量分数)的赤泥复配阻燃剂中添加占阻燃剂2%(质量分数)的ZnO可使聚乙烯的氧指数由27.2%提高到28.9%,UL-94通过V-0级,峰值热释放速率及烟释放速率均下降了40%.ZnO能显著改善阻燃聚乙烯的热稳定性并增加残炭量,使残炭更加致密.     

氢氧化镁/红磷对硅橡胶/黏土纳米复合物阻燃性能的研究

选用甲基乙烯基硅橡胶(MVMQ)和十六烷基三甲基溴化铵(C16BrN)改性的蒙脱土(OMMT)纳米复合材料为原料,以氢氧化镁/微胶囊化红磷(MH/MRP)为阻燃剂,以气相法白炭黑为补强剂,用熔融共混法制备了无卤阻燃MVMQ纳米复合材料。笔者采用XRD表征制备的MVMQ/OMMT纳米复合物的结构,用机械性能测试研究气相法白炭黑和OMMT对MVMQ的协效补强作用,通过极限氧指数、UL94 V垂直燃烧法、环境扫描电镜(ESEM)和热重分析(TG)等分析测试手段研究其燃烧性能和热性能,结合材料宏观燃烧性能的改变,推断OMMT和MH/MRP对MVMQ的阻燃作用机理。     

溴-锑-磷协效阻燃体系对聚丙烯土工格栅阻燃和生烟性能的影响

利用极限氧指数、垂直燃烧试验、酒精喷灯燃烧试验、锥形量热仪、热重分析和力学性能测试等手段研究了溴-锑-磷阻燃体系对聚丙烯(PP)土工格栅的力学性能、燃烧性能、生烟性能和热解特性的影响。结果表明,低添加量(质量分数≤5%)的溴-锑-磷阻燃体系对PP土工格栅的拉伸强度和断裂伸长率影响较小,但明显提高了材料的阻燃性能,其中质量分数5%的四溴双酚A-双(2,3-二溴丙基醚)(八溴醚)-三氧化二锑阻燃PP的峰值热释放速率(HRR)和总释放热(THR)相比于纯PP分别下降了39.98%和26.03%。八溴醚-三氧化二锑阻燃体系与红磷复配时还表现出较好的协效作用,当溴-锑与磷的质量比为3∶2时,协效阻燃效果最优,仅添加5%的协效阻燃体系便可使PP的LOI和UL 94等级分别达到27.9%和V-0级,并通过酒精喷灯燃烧试验。与纯PP相比,溴-锑阻燃体系虽降低了PP的HRR和THR,但增大了燃烧过程中的生烟速率(SPR)和总产烟量(TSR),而红磷的加入能有效降低溴-锑阻燃PP的生烟量。热重分析表明,溴-锑-磷协效阻燃体系表现出较好的气相阻燃作用,能有效降低PP的热裂解速率,增强了PP的阻燃性能。     

ZIF-8/BC协同膨胀阻燃聚丙烯性能研究

为提高聚丙烯(PP)阻燃性能,以三聚氰胺磷酸盐为酸源兼气源、双季戊四醇为碳源构成膨胀阻燃体系,添加不同比例的类沸石咪唑酯骨架材料(ZIF-8)与生物质炭(BC)制备的杂化材料(ZIF-8/BC)为协效剂,制备无卤膨胀阻燃PP复合材料,研究材料的燃烧性能、力学性能和热稳定性等。结果表明:所构成的膨胀阻燃体系能有效提高PP的阻燃性能,未添加ZIF-8/BC时氧指数可达31. 4%,拉伸强度为17. 37 MPa; ZIF-8/BC的加入使复合材料氧指数有所降低,但能提高复合材料的力学性能,添加ZIF-8∶BC质量比为1∶2的ZIF-8/BC,材料氧指数、拉伸强度分别为27. 2%、19. 87MPa; ZIF-8/BC的添加能提高复合材料的残炭量,且该量随BC含量增加而增大,ZIF-8/BC协效剂有利于形成致密炭层结构和抑制烟气释放。     

石膏基聚苯乙烯饰面防火板的阻燃性能研究

为解决建筑外保温系统发生火灾时火焰蔓延速度快和有毒烟气产生量大等问题,以α-盐石膏和粉煤灰为基材,氢氧化镁为无机阻燃剂,聚羧酸减水剂为外加剂制作自流平砂浆;通过正交试验,研究聚苯乙烯泡沫保温板(EPS)表面涂覆自流平砂浆对其阻燃性能和耐火性能的影响。结果表明:减水剂掺量是影响氧指数(LOI)测试结果的主要因素;氢氧化镁掺量对于热释放速率峰值(pk-HRR)、总热释放量(THR)以及点燃时间(TTI)的影响尤为明显;粉煤灰取代率是影响烟密度等级的主要因素;阻燃性能好的石膏基自流平砂浆最佳配合比为水胶比为0.30,粉煤灰取代率为30%,减水剂掺量为0.2%,氢氧化镁掺量为12%,饰面阻燃处理后能明显提高EPS板材的阻燃和抑烟效果。     

油浸变压器排油注氮装置在500kV变电站的设计与应用

在分析500kV变电站主变压器消防系统的现状,比较3类消防系统优缺点的基础上,详细论述了主变排油注氮装置的结构组成、工作原理、参数计算、控制系统设计以及需要注意的事项等,为下一步排油注氮装置的推广应用打下基础.     

HAZOP结合What-if方法在某延迟焦化装置除焦中的应用

为克服传统危险与可操作性（HAZOP）定性分析方法在复杂操作、间歇作业等过程中使用的局限性,提出在传统HAZOP定性分析方法的基础上结合What-if（故障假设）方法,对人的不安全行为和操作规程不完备所导致的风险后果分析作出补充。详细说明其技术原理、工作流程等使用细节,系统阐述该方法与传统HAZOP定性分析方法的区别,并在某延迟焦化装置的除焦操作的风险分析中应用。经分析,识别出在“给水-泡焦”节点,有“操作规程错误”场景2项,“操作规程不具体”场景1项,不存在“操作人员未按操作规程执行”场景。研究结果表明:本文方法有效且具有较好效果,可以广泛应用于操作规程/作业指导书审查、作业过程隐患排查等方面,帮助企业开展操作层面的风险识别与管理,提升企业的生产安全水平。     

潞安矿区煤层渗透率的各向异性特征实验研究

为了研究原位煤体渗透性的各向异性特征,以山西潞安常村矿3号煤层圆柱试样为对象,利用TCQT-Ⅲ型低渗煤层气相驱替增产试验装置,对煤样进行加载,并以氮气注入压力2.0 MPa的条件下,分析垂直层理和平行层理2个方向的煤体变形和渗透率变化特征。实验结果表明:煤样在加载过程中,平行和垂直层理煤样渗透率均随着有效应力的增大而减小,平行层理方向的渗透率始终大于垂直层理方向,应力加载初期渗透率急剧下降,最后逐渐趋于平缓;径向应变的增加量与渗透率呈正相关性,且平行层理相关性大于垂直层理;沿平行层理方向的裂隙度大于沿垂直层理方向,沿垂直层理方向的应变量大于沿平行层理方向;应变增加量均随有效应力的增加而逐渐减小。研究结果可为煤层井网布置及优化提供参考。     

Nighttime pedestrian fatalities: A comprehensive examination of infrastructure,user, vehicle,and situational factors

Introduction: Pedestrian fatalities in the United States increased 45.5% between 2009 and 2017. More than 85% of those additional pedestrian fatalities occurred at night. Method: We examine Fatality Analysis Reporting System (FARS) data for fatal pedestrian crashes that occurred in the dark between 2002 and 2017. Within-variable and before/after examinations of crashes in terms of infrastructure, user, vehicle, and situational characteristics are performed with one-way analysis of variance (ANOVA) and two-sample t-tests. We model changes in crash characteristic proportions between 2002–2009 and 2010–2017 using linear regressions and test for autocorrelation with Breusch-Godfrey tests. Results: The increase in fatal nighttime pedestrian crashes is most strongly correlated with infrastructure factors: non-intersection unmarked locations (saw 80.8% of additional fatalities); 40–45 mph roads (54.6%); five-lane roads (40.7%); urban (99.7%); and arterials (81.1%). In addition, SUVs were involved in 39.7% of additional fatalities, overrepresenting their share of the fleet. Increased pedestrian alcohol and drug involvement warrant further investigation. The age of pedestrians killed increased more (18.1%) than the national average (3.2%). Conclusions: By identifying factors related to the increase in nighttime pedestrian fatalities, this work constitutes a vital first step in making our streets safer for pedestrians. Practical Applications: More research is needed to understand the efficacy of different solutions, but this paper provides guidance for such future research. Engineering solutions such as road diets or traffic calming may be used to improve identified infrastructure issues by reducing vehicle speeds and road widths. Rethinking vehicle design, especially high front profiles, may improve vehicle issues. However, the problems giving rise to these pedestrian fatalities are likely a result of not only engineering issues but also interrelated social and political factors. Solutions may be correspondingly comprehensive, employing non-linear, systems-based approaches such as Safe Systems.     

Footedness and Mounting—Short Review and Two Case Studies

Footedness is a personal quality like handedness. Footedness may be associated with moving ability during mounting, dismounting, and jumping movements. Occupational accidents have occurred during movement at different working levels, during the use of access and exit systems, and during the mounting of vehicles. Aging can also affect accident risk and body laterality. For example, falling accidents on stairs are common among the elderly. One reason for accidents may be that the structure of the access system or stair system is unsuitable for individual moving patterns depending partly on body laterality. Footedness and the way the feet are used may be contradictory to the demands of the moving situation, especially during uncommon or rapid situations. This contradiction may trigger disturbance during moving. The aims of this pilot study were (a) to review the literature briefly and (b) to describe the use of the dominant and nondominant foot by farmers and the elderly when mounting a tractor and stairs, respectively. The study also gives ideas for future studies based on both (a) and (b).     

AHP与GA-SVM耦合模型在滑坡预警中的应用*

为了减少滑坡造成的损失,提高滑坡预测的准确性,通过搭建灾害模拟平台获得滑坡的实验数据,在获得多组模拟实验数据后,分析各变量的特性。首先,通过层次分析(Analytic Hierarchy Process,AHP)算法,对滑坡进行危险度划分;然后,通过支持向量机(Support Vector Machine,SVM)建立模型,遗传算法(Genetic Algorithm,GA)再优化SVM参数,提出1种层次分析法与GA-SVM相耦合的模型。研究结果表明:AHP方法划分后的数据,通过GA与SVM结合建立的模型精度较好,实验预测结果与实际结果较为吻合,与单一SVM相比,精度更高,结果更好,更加适用于多变量的复杂非线性滑坡预警。     

Debunking the false dichotomy of leadership idealism and pragmatism: Critical evaluation and support of newer genre leadership theories

Leadership theories have shifted over the last few decades from a focus on managerial functions and economic leader–follower exchanges toward greater focus on the interpersonal dynamics occurring within the leadership process. Theories such as transformational, ethical, authentic, and other “newer genre” theories were created to address neglected topics such as leader vision and inspirational messages, transparency, emotional effects, morality, individualized attention, and intellectual stimulation. Critiques of these theories, however, have been raised. In this paper, we address five of those critiques and argue for the validity and practical effectiveness of the new genre theories. Further, we describe how newer genre leadership research should be viewed as a performative epistemology, entailing a process of co‐creation involving scholars and practitioners. Finally, from this view, we provide general ideas for leader development. Copyright © 2014 John Wiley & Sons, Ltd.     

Occupational Safety and Health in Finland

In Finland, occupational safety is the responsibility of the employer, while the occupational safety and health laws are enforced by the Labour Inspection Service, an organization of the state. The Labour Inspection is divided in 11 administrative districts, and it employs 360 professionals. They are mandated to carry out site visits without prearranged appointments to inspect safe work situations, working hours, construction safety, or any aspect of accident risks. The inspectors are also mandated to verify the existence of sufficient occupational health services as prescribed by the Occupational Health Services Act for all employees. The occupational health services are typically provided by enterprise-owned medical departments, by mutually owned health care centers, by private practitioners, or by municipal health care centers. The latter are required by law to provide all services as prescribed by the legislation to anyone who comes to the facility. This situation is prevalent in the countryside, where there are very few private caregiving centers. Declaring occupational accidents and disease cases is mandatory, and the Inspection districts examine all accidents to establish causes and consequences, and to initiate prosecution in case of criminal negligence. Labour Inspection Districts are also notified of the new occupational disease cases as they are declared to insurance companies. Insurance for occupational disease, accidents, and death is an obligation of the employer, although they can choose the insurance company. The medical confidentiality between the workers and their occupational health care providers is very strict. Official statistics are maintained by the state Statistics Finland organization, and they may be used, for example, for research purposes by scientific institutes like the Finnish Institute of Occupational Health. Construction industry accounts for 25% of all fatal accidents (120 cases per 1 million working hours), followed by mechanical, wood, metal, machinery, and pulp and paper industry (10% each of fatal accidents) with rates ranging from 100–160 cases per 1 million working hours. There are some 5,000 occupational disease cases per year (rate 22/10,000 employed). The major disease categories include repetitive strain injuries (1,300 cases), respiratory allergies (600 cases), occupational skin diseases (1,000 cases), and 900 cases of noise-caused hearing loss. In 1998, 589 cases of asbestos-related diseases were reported.     

森林地表火蔓延模拟方法及其计算机实现

进行了森林火蔓延的研究,对传统的经验公式和模型进行改进,明显发现改进的模型有更好的结果,用计算机巧妙准确地实现了模拟模型,在风力不是特别大,地形变化不是特别剧烈时,该模型有较高精度;并结合火蔓延的主要因素（气象因子、气候、地形等）,进行系统分析,写出算地,编制实现地表火蔓延的预测预报计算机系统软件。这对于有效的组织扑救、减少火灾损失、计算森林火灾的损失评估有重要意义。     

公路隧道火灾逃生疏散研究

以苍岭隧道为背景,首先采用经验计算理论和计算软件building EXODUS相结合的方式,从被困人员的安全疏散时间、高温烟气的影响、隧道横通道的利用率以及人员的疏散行为特性进行了研究。结果表明:中小规模火灾情况下的安全疏散时间控制在8 min之内,高温烟气影响不大,但横通道的利用率不平均,且人员疏散路线相对集中。然后对存在的逃生疏散问题提出针对性建议以及其他相关建议,旨在为更大程度降低事故的严重性和经济财产损失。