Spectrophotometric method for the determination of chromium (VI) in water samples

A simple and sensitive spectrophotometric method for the determination of chromium has been developed. The method is based on the diazotization of Dapsone in hydroxylamine hydrochloride medium and coupling with N-(1-Napthyl) Ethylene Diamine Dihydrochloride by electrophilic substitution to produce an intense pink azo-dye, which has absorption maximum at 540 nm. The Beer's law is obeyed from 0.02-1.0 microg mL(-1) and the molar absorptivity is 3.4854 L mol(-1) cm(-1). The Limits of quantification and Limit of detection of the proposed method are 0.0012 microg mL(-1) and 0.0039 microg mL(-1) respectively. The method has been successfully applied for the determination of chromium in water samples and the results were statistically evaluated with that of the reference method.     

A highly sensitive spectrophotometric determination of micro amounts of vanadium(V) in environmental and alloy samples by using 3,4-dihydroxybenzaldehydeisonicotinoylhydrazone (3,4-DHBINH)

3, 4-Dihydroxybenzaldehydeisonicotinoylhydrazone was prepared, characterized with spectral analyses and used for developing a new method for the simple, sensitive and rapid spectrophotometric determination of vanadium(V) which gives maximum absorbance at wave length 360 nm. The metal ion gives a yellow colored complex with 3, 4-DHBINH in acetate buffer of pH 5.5 with 1:1 (metal:ligand) composition. The method obeys Beer's law in the range 0.5-5.3 mug mL(-1) of vanadium(V). The molar absorptivity and Sandell's sensitivity were found to be 1.29 x 10(4) L mol(-1) cm(-1) and 0.003949 mug cm(-2) respectively. The correlation co-efficient of the V(V)-3, 4-DHBINH complex was 0.992 which indicated an excellent linearity between the two variables. The repeatability of the method was checked by finding the relative standard deviation (RSD) as 0.424% (n = 5), and its detection limit 0.01677 mug mL(-1) of vanadium(V). The instability constant of the method was calculated by Asmus' method as 4.1666 x 10(-3). The interfering effect of various cations and anions were also studied. The proposed method was successfully applied to the determination of vanadium(V) in environmental samples (water and soil) tobacco leaves and alloy samples. The validity of the method was tested by comparing the results with those obtained using an atomic absorption spectrophotometer.     

4—（H—酸偶氮）—1—苯基—3—甲基吡唑酮光度法测定铜的研究及应用

合成了新试剂４－（Ｈ－酸偶氮）１－苯基－３－甲基吡唑酮（ＨＰＭＰ）,研究了其和铜的显色反应。在ｐＨ＝７的ＮＨ４Ａｃ缓冲介质中,ＣＴＭＡＢ存在下,ＨＰＭＰ与Ｃｕ（Ⅱ）生成２∶１紫色络合物,λｍａｘ＝５８０ｎｍ,ε＝５．６８×１０４Ｌ·ｍｏｌ－１·ｃｍ－１。铜含量在０～０．６ｍｇ／Ｌ内符合比耳定律。方法用于水样和生物样品中铜的测定,结果令人满意。     

Dibenzazepin hydrochloride as a new spectrophotometric reagent for determination of hydrogen peroxide in plant extracts

A rapid, simple, accurate, and sensitive visible spectrophotometric method for the determination of trace amounts of hydrogen peroxide in acidic buffer medium is reported. The proposed method is based on the oxidative coupling of Ampyrone with dibenzazepin hydrochloride by hydrogen peroxide in the buffer medium of pH?4.0 which is catalyzed by ferrous iron. The blue-colored product formed with maximum absorption at 620?nm was found to be stable for 2?h. Beer's law is obeyed for hydrogen peroxide concentration in the range of 0.03-0.42?μg?ml(-1). The optimum reaction conditions and other important optical parameters are reported. The molar absorptive and Sandell's sensitivity are found to be 5.89?×?10(4)?mol(-1)?cm(-1) and 0.57?g/cm(2), respectively. The interference due to diverse ions and complexing agents was studied. The method is successfully applied to the determination of hydrogen peroxide in green plants satisfactorily.     

琉基葡聚糖凝胶分离富集-二溴对甲偶氮羧微乳液分光光度法测定微量镍

研究了在溴代十六烷基吡啶（CPB）、正丁醇、正庚烷、水自制微乳溶液存在下,镍与二溴对甲偶氮羧（DBpMCA）的显色反应,在pH值为9．07的Na2B4O7-HCl缓冲溶液中,镍与试剂形成淡红色配合物,最大吸收峰位于560nm波长处,表观摩尔吸光系数ε为2．8×10^5L／（mol·cm）。优化了试验条件,考察了共存离子的影响,方法在0．002mg／L～0．320mg／L范围内符合比尔定律,检出限为0．0006mg／L,生活垃圾、水、土壤样品测定的RSD为2．1％～5．2％,加标回收率为96．6％～104％。     

Detection of Lead in Vegetables with New Chromogenic Reagent by Spectrophotometry

A new simple, rapid selective and highly sensitive chromogenic reagent dibromo-p-methyl-carboxyazo (DBMCA) was synthesized and studied in detail for the spectrophotometric detection of lead. In 0.25 M phosphoric acid medium, which greatly increases the selectivity, Lead reacts with DBMCA to form a 1:2 blue complex having a sensitivity absorption peak at 646 nm. Under optimal conditions, Beer's Law is obeyed over the range from 0.09 to 0.8 microg mL(-1) Pb (II) and the apparent molar absorptivity is 1.03 x 10(5) mL(-1) cm(-1). The detection limit and the variation coefficient were found to be 2.12 microg mL(-1) and 1.0% respectively. It is found that, except for Ca (II) and Ba (II) all foreign ions studied do not interfere with detection. The interference caused by Ca (II) and Ba (II) can be easily eliminated by prior extraction with potassiumiodide-methylisobutylketone. The proposed method has been applied successfully for to the detection of Lead in vegetable leaves with good results.     

二溴邻硝基偶氮胂微乳液分光光度法测定水中锌

试验了溴代十六烷基吡啶、正丁醇、正庚烷、水自制微乳溶液体系中,锌与二溴邻硝基偶氮胂的显色反应,建立了分光光度法测定水中锌的方法。在pH值为3.0的乙酸-乙酸钠缓冲溶液中,锌与试剂形成淡红色配合物,其最大吸收峰位于532nm波长处,表观摩尔吸光系数F为1.87×10^5L／（mol·cm）。在显色液中锌的质量浓度在0.003mg／L-0.350mg／L范围内符合比尔定律,检出限为0.001mg／L,水样中锌测定的RSD为1.3％-2.9％,加标回收率为95.7％-102％。     

巯基葡聚糖凝胶分离富集二溴邻硝基偶氮胂分光光度法测定汞 (Ⅱ)

研究了溴代十六烷基吡啶、正丁醇、正庚烷和水自制微乳溶液介质中,汞（Ⅱ）与二溴邻硝基偶氮胂的显色反应,采用巯基葡聚糖凝胶分离共存离子并富集汞（Ⅱ）,建立了分光光度法测定微量汞（Ⅱ）的新方法。在pH值为6．00的乙酸-乙酸钠缓冲溶液中,汞（Ⅱ）与试剂形成紫红色络合物,其最大吸收峰位于530nm波长处,表观摩尔吸光系数8为3．3×10^5L／（mol·cm）。在显色液中汞（Ⅱ）质量浓度在8．00μg／L～600μg／L范围内符合比尔定律,检出限为0．003mg／L,水、牛奶、化妆品测定的RSD为1．4％～6．1％,加标回收率为96．8％～105％。     

Spectrophotometric determination of indiumin zinc effluent

A new extraction-spectrophotometric method for the determination of indium at ppb level in zinc effluent is described. It is based on quantitative extraction (51.2–99.2%) of the tetrabromoindate complex with toluene solution of N,N-diphenylbenzamidine and its nine analogous from sulphuric acid solutions, which allowed the extract to react with basic dye (i.e. brilliant green, malachite green, crystal violet) solution in sequence. Among the basic dyes tested, brilliant green gave the most sensitive colour reaction. The value of molar absorptivity of the amidine bromoindate extracts with brilliant green lie in the range of (0.53–1.03)×10⁵ l mole^-1 cm^-1 at absorption maximum, 630–640. With the most sensitive compound, N-(2-methyl-phenyl)-N-phenylbenzamidine(APPBA), the detection limit of the method is 13 ppb. The method is free from interferences of almost all ions associated with indium. The method has been applied for the determination of indium to zinc-effluent.     

乙基橙褪色光度法测定加碘盐中微量碘（Ⅴ）

提出了在盐酸介质中,在溴化钾催化作用下,碘酸根氧化乙基橙褪色吸光光度法测定碘的新方法。结果表明,最大吸收波长为５１０ｎｍ时,碘（Ⅴ）浓度在０～１．６ｍｇ／Ｌ内呈线性关系,表观摩尔吸光系数为４．４×１０４,方法用于加碘盐中碘（Ⅴ）的测定,结果满意。     

Solid phase extraction of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) ions with 1-(2-thiazolylazo)-2-naphthol loaded Amberlite XAD-1180

A new method for separation and preconcentration of trace amounts of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) ions in various matrices was proposed. The method is based on the adsorption and chelation of the metal ions on a column containing Amberlite XAD-1180 resin impregnated with 1-(2-thiazolylazo)-2-naphthol (TAN) reagent prior to their determination by flame atomic absorption spectrometry (FAAS). The effect of pH, type, concentration and volume of eluent, sample volume, flow rates of sample and elution solutions, and interfering ions have been investigated. The optimum pH for simultaneous retention of all the metal ions was 9. Eluent for quantitative elution was 20 ml of 2 mol l(-1) HNO(3). The optimum sample and eluent flow rates were found as 4 ml min(-1), and also sample volume was 500 ml, except for Mn (87% recovery). The sorption capacity of the resin was found to be 0.77, 0.41, 0.57, and 0.30 mg g(-1) for Cu(II), Ni(II), Cd(II), and Mn(II), respectively. The preconcentration factor of the method was 200 for Cu(II), 150 for Pb(II), 100 for Cd(II) and Ni(II), and 50 for Mn(II). The recovery values for all of the metal ions were > or = 95% and relative standard deviations (RSDs) were < or = 5.1%. The detection limit values were in the range of 0.03 and 1.19 microg l(-1). The accuracy of the method was confirmed by analysing the certified reference materials (TMDA 54.4 fortified lake water and GBW 07605 tea samples) and the recovery studies. This procedure was applied to the determination of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) in waste water and lake water samples.     

Measurement of chemical oxygen demand (COD) in natural water samples by flow injection ozonation chemiluminescence (FI-CL) technique

COD determination based on ozone oxidation of alpha-naphthol combined with UV radiation (UV-O3) has been studied in the present work. Utilizing the phenomenon that luminol can be oxidized by the dissolved ozone to produce luminescence, we have established a new method of utilizing aqueous chemiluminescence to determine COD. The kinetics and mechanism of the ozonation reaction of alpha-naphthol have been investigated in order to gain a better understanding of the general applicability and limitation of the technique. Real world samples were analyzed and the results show that the relative error of COD(FI-CL) measurement for water samples was < 10%. Compared with the results of the conventional potassium permanganate method, the COD values of the FI-CL method are consistently higher (0-20% relative). The higher COD values suggest that the ozone-UV system is a more effective oxidation technique.     

Flow injection spectrophotometric determination of methamidophos using online hydrolysis

A new protocol for the online spectrophotometric determination of methamidophos has been developed. The method is based on online hydrolysis of methamidophos, and the resulting hydrolyzed product is reacted with sodium nitroproside to form a colored complex. The calibration curve is linear over the concentration range of 0.5–20 μgml^?–?1, with a molar absorptivity of 2.5×10⁴ L mol^?1 cm^?1. The method is fast and reproducible with a sample throughput of 90 samples/h. The method is successfully applied to formulations and real samples.     

Biofilms coating Schoenoplectus californicus as indicators of water quality in the Río de la Plata Estuary (Argentina)

N-ethyl-3-carbazolecarboxaldehyde-3-thio- semicarbazone (ECCT) as an new analytical reagent used for the development of a highly sensitive extractive spectrophotometric method for the determination of copper(II). The ECCT forms a greenish-yellow colored 1:1 (M:L) complex with copper(II) at pH 3.0, which is well extracted into n-butanol and shows maximum absorbance at 380nm. The color of the complex is stable for more than forty eight hours. The system obey Beer's law in the range 0.4–3.6 with 2.243 × 10⁴lmol⁻¹cm⁻¹, 2.83 × 10^-3μgcm⁻² molar absorptivity and Sandell's sensitivity respectively. The regression coefficient is 0.412 with 0.99 correlation coefficient. The precision and accuracy of the method was checked by finding the relative standard deviation (0.422%). This developed method has been successfully employed for the determination of copper(II) in environmental and pharmaceutical samples. The method is evaluated by analyzing samples from the bureau of analyzed samples (BCS 233, 266, 216/1, 207 and 179) and by inter comparison of experimental values using AAS.     

Measurements of dissolved methylmercury in natural waters using diffusive gradients in thin film (DGT)

A diffusive gradient in thin films (DGT) technique for measuring methylmercury (MeHg) concentrations in natural waters was developed using 3-mercaptopropyl-functionalized silica gel to preconcentrate the methylmercury. The new resin was characterized and calibrated. Methylmercury is efficiently accumulated at a pH range of 3-9. Basic performance tests of the new DGT device confirmed the applicability of Fick's first law for such DGT measurements. The diffusion coefficient of methylmercury in polyacrylamide gel was 5 x 10(-6) cm(2) s(-1). Methylmercury concentrations determined by DGT deployed for different time periods in the field are statistically not different from results obtained through direct measurements. The DGT technique represents therefore an alternative in situ sampling method for methylmercury. The detection limit of the overall method is 1 pg of MeHg, which correspond to approximately 30 pg L(-1) of MeHg in a water sample, when deploying a typical DGT device for 24 hours. Lower MeHg concentrations are measurable using longer deployment times or thinner diffusive gel layers.     

Development of active and diffusive sampling methods for determination of 3-methoxybutyl acetate in workplace air

Monitoring of the workplace concentration of 3-methoxybutyl acetate (MBA), which is used in printer's ink and thinner for screen-printing and as an organic solvent to dissolve various resins, is important for health reasons. An active and a diffusive sampling method, using a gas chromatograph equipped with a flame ionization detector, were developed for the determination of MBA in workplace air. For the active sampling method using an activated charcoal tube, the overall desorption efficiency was 101%, the overall recovery was 104%, and the recovery after 8 days of storage in a refrigerator was more than 90%. For the diffusive sampling method using the 3M 3500 organic vapor monitor, the MBA sampling rate was 19.89 cm(3) min(-1). The linear range was from 0.01 to 96.00 microg ml(-1), with a correlation coefficient of 0.999, and the detection limits of the active and diffusive samplers were 0.04 and 0.07 microg sample(-1), respectively. The geometric mean of stationary sampling and personal sampling in a screen-printing factory were 12.61 and 16.52 ppm, respectively, indicating that both methods can be used to measure MBA in workplace air.     

结晶紫褪色分光光度法测定SO_2的研究

在碱性介质中,ＳＯ２能使结晶紫褪色且褪色的程度随ＳＯ２量的增加而呈线性关系,据此建立了分光光度法测定ＳＯ２的新方法,确定了显色测定的最佳条件。方法的最大吸收波长在６００ｎｍ处,表观摩尔吸光系数为７３×１０３Ｌ／ｍｏｌ·ｃｍ。ＳＯ２量在０～１００μｇ／２５ｍｌ范围内符合比尔定律     

Utility of cefixime as a complexing reagent for the determination of Ni(II) in synthetic mixture and water samples

A simple, sensitive, and accurate UV spectrophotometric method has been developed for the determination of nickel in synthetic mixture and water samples. The method is based on the complexation reaction of nickel ion with cefixime, thus leading to the formation of Ni–cefixime complex in ethanol-distilled water medium at room temperature. The complex showed the maximum absorption wavelength at 332 nm. Beer’s law is obeyed in the working concentration range of 0.447–4.019 μg?mL^?1 with apparent molar absorptivity of 7.314?×?10³?L?mol^?1?cm^?1 and Sandell’s sensitivity of 0.008 μg/cm²/0.001 absorbance unit. The limits of detection and quantitation for the proposed method are 0.016 and 0.054 μg?mL^?1, respectively. The factors such as cefixime concentration and solvent affecting the complexation reaction were carefully studied and optimized. The method is validated as per the International Conference on Harmonisation guideline. The method is successfully applied to the determination of Ni(II) in synthetic mixture and wadi water samples collected from Al Rustaq. The same water samples are also analyzed by atomic absorption spectrophotometry. Both methods determined the amount of Ni(II) in water sample and found to be approximately the same.     

Spectrophotometric determination of platinum(IV) in alloys, complexes, environmental, and pharmaceutical samples using 4-[N,N-(diethyl)amino] benzaldehyde thiosemicarbazone

4-[N,N-(Diethyl)amino] benzaldehyde thiosemicarbazone (DEABT) is proposed as an analytical reagent for the spectrophotometric determination of platinum(IV). The DEABT forms 1:2 yellow complex with Pt(IV), which is sparingly soluble in water and completely soluble in water–ethanol–DMF medium. The Pt(IV)–DEABT complex shows maximum absorbance at 405 nm. Beer’s law is valid up to 7.80 μg cm^???3, and optimum concentration range for the determination of platinum(IV) is 0.48–7.02 μg cm^???3. The molar absorptivity and Sandell’s sensitivity of the method are found to be 1.755 × 10⁴ dm³ mol^???1 cm^???1 and 0.0012 μg cm^???2, respectively. The relative error and coefficient of variation (n?=?6) for the method does not exceed ±0.43% and 0.35%, respectively. Since the method tolerates a number of metal ions commonly associated with platinum, it can be employed for the determination of platinum in environmental samples, pharmaceutical samples, alloys, catalysts, and complexes. The method is rapid as the Pt(IV)–DEABT complex is soluble in water–ethanol–DMF medium and not requiring any time consuming extraction method for the complex.     

Application of a compact all solid-state laser system to the in situ detection of atmospheric OH,HO2, NO and IO by laser-induced fluorescence

A tuneable, high pulse-repetition-frequency, solid state Nd:YAG pumped titanium sapphire laser capable of generating radiation for the detection of OH, HO2, NO and IO radicals in the atmosphere by laser induced fluorescence (LIF) has been developed. The integration of the laser system operating at 308 nm into a field measurement apparatus for the simultaneous detection of hydroxyl and hydroperoxy radicals is described, with detection limits of 3.1 x 10(5) molecule cm(-3) (0.012 pptv in the boundary layer) and 2.6 x 10(6) molecule cm(-3) (0.09 pptv) achieved for OH and HO2 respectively (30 s signal integration, 30 s background integration, signal-to-noise ratio = 1). The system has been field tested and offers several advantages over copper vapour laser pumped dye laser systems for the detection of atmospheric OH and HO2 radicals by LIF, with benefits of greater tuning range and ease of use coupled with reduced power consumption, instrument footprint and warm-up time. NO has been detected in the atmosphere at approximately 1 ppbv by single photon LIF using the Alpha 2Sigma+ <-- Chi 2Pi1/2 (0,0) transition at 226 nm, with absolute concentrations in good agreement with simultaneous measurements made using a chemiluminescence analyser. With some improvements in performance, particularly with regard to laser power, the theoretical detection limit for NO is projected to be approximately 2 x 10(6) molecule cm(-3) (0.08 pptv). Whilst operating at 445 nm, the laser system has been used to readily detect the IO radical in the laboratory, and although it is difficult to project the sensitivity in the field, an estimate of the detection limit is < 1 x 10(5) molecule cm(-3) (< 0.004 pptv), well below previously measured atmospheric concentrations of IO.