Determination of Nitrobenzene in Wastewater Using a Hanging Mercury Drop Electrode

The determination of trace amount nitrobenzene in wastewater on a hanging mercury drop electrode was studied. The determination conditions of pH, supporting electrolyte, accumulation potential, accumulation time, and voltammetric response were optimized. The sharp peak of the nitrobenzene was appeared at 0.05 V. The peak electric current was proportional to the concentration of nitrobenzene in the range of 1.47 × 10⁻⁵ ∼ 1.0 × 10⁻³ mol/l with relative standard deviations of 3.99 ∼ 8.94%. The detection limit of the nitrobenzene in water was 5 × 10⁻⁶ mol/l. The proposed method offered low limit of determination, easy operation, the use of simple instrumentation, high sensitivity and good reproducibility. It was applied to the determination of nitrobenzene in wastewater with an average recovery of 94.0% ∼ 105%. The proposed method provided fast, sensitive and sometimes real time detection of nitrobenzene.     

Bioaerosols as contributors to poor air quality in Taichung City, Taiwan

Bioaerosols are a type of suspended sediments that contribute to poor air quality in Taiwan. Bioaerosols include allergens such as: fungi, bacteria, actinomycetes, arthropods and protozoa, as well as microbial products such as mycotoxins, endotoxins and glucans. When allergens and microbial products are suspended in the air, local air quality will be influenced adversely. In addition, when the particle size is small enough to pass through the respiratory tract entering the human body, the health of the local population is also threatened. Therefore, the purpose of this study is to attempt to understand the concentration and types of bacteria and the bacteria numbers for various particle size ranges during a study period of June 2005 to February 2006 in Taichung City, Central Taiwan. The results indicate that the total average bacterial concentration by using NA medium incubated for 48 h were 8.0 × 10², 1.4 × 10³, 2.4 × 10³ and 1.3 × 10³, 1.9 × 10³, 3.5 × 10³ cfu/m³ for CMES, TRIPS and RFS sampling sites during the daytime and nighttime period of June 2005 to February 2006. Moreover, the total average bacterial concentration by using R₂A medium incubated for 48 h were 8.5 × 10², 1.5 × 10³, 2.2 × 10³ and 1.2 × 10³, 1.7 × 10³, 2.5 × 10³ cfu/m³ for CMES, TRIPS and RFS sampling sites the daytime and nighttime during the same sampling period. The total average bacteria concentration was the same in either NA or R₂A medium for the same sampling times or sites. The total average bacterial concentration was higher in daytime period than that of nighttime period for CMES, TRIPS and RFS sampling sites. The high average bacterial concentration was found in the particle size range of 0.53–0.71 mm (average bioaerosol size was in the range of 2.1–4.7 μm) for each sampling site. Also, 20 kinds of bacteria exceeded levels for each sampling site and were classified as according to shape: rod, coccus and filamentous.     

3种大环内酯类抗生素对海洋发光菌的毒性作用

以海洋发光菌为受试生物,研究了红霉素、罗红霉素、乙酰螺旋霉素3种抗生素的单一和联合毒性作用。基于常见的3种联合作用评价方法,对混合体系的联合毒性作用进行了评价研究。结果表明,3种抗生素对发光菌单独作用的半最大效应浓度(EC₅₀)分别为:0.725 9×10^-3,1.207 8×10^-3和0.633×10^-3mol/L;二元联合体系对发光菌的毒性强弱为：红霉素+乙酰螺旋霉素>罗红霉素+红霉素>罗红霉素+乙酰螺旋霉素。3种抗生素联合体系作用类型的不同与每种抗生素不同取代基对微生物生理生化过程的影响有关。在选择的联合研究体系中,以毒性单位法获得参数的数值较大,灵敏度较高。研究大环内酯类抗生素对发光菌的毒性作用可为环境风险评价提供基础数据。     

Spatio-Temporal Fluxes in Particulate Organic Carbon in a Tropical Coastal Lagoon

Temporal and spatial variations in particulate organic carbon (POC) in relation to primary production, chlorophyll a, phaeophytin, plankton abundance, secondary production and suspended particulate matter (SPM) were studied monthly for 1 year from April 1996 to March 1997 in a shallow tropical coastal lagoon on the southwest coast of India. Though temporal variations in all components were significant, spatial variabilities were not statistically significant. POC values range from 200 to 5690 mg C m³ h⁻¹, while primary production, chlorophyll a, and phaeophytin varied between 0.02 and 14.53 mg C m⁻³ h⁻¹, 0.87 and 23.11 mg m⁻³ and 3.02 and 30.581 mg m⁻³, respectively. Phytoplankton and zooplankton abundance varied from 0.01 to 655.5×10⁵ no m⁻³ and negligible to 7.08×10⁵ no m⁻³ respectively; secondary production from 10 to 490 mg C m⁻³ and SPM between 0.38 and 74.43×10⁴ mg m⁻³ during this study. Temporally, postmonsoon months were observed to have the highest concentrations of POC in the lagoon waters. The bulk of the POC pool in the lagoon was composed of secondary producers (72%), followed by chlorophyll a (21%), phaeophytin (7%) and suspended particulate matter of inorganic origin (< 0.1%).     

Occurrences and fate of selected human antibiotics in influents and effluents of sewage treatment plant and effluent-receiving river Yamuna in Delhi (India)

Antibiotics consumption has increased worldwide, and their residues are frequently reported in aquatic environments. It is believed that antibiotics reach aquatic water bodies through sewage. Medicine consumed for healthcare practices are often released into sewage, and after sewage treatment plant, it reaches the receiving water bodies of lakes or rivers. In the present study, we determined the fate of some commonly used antibiotics in a sewage treatment plant (STP) located in Delhi and the environmental concentration of these antibiotics in the Yamuna River, which receives the sewage and industrial effluent of Delhi. There are many reports on antibiotics occurrences in STP and river water worldwide, but monitoring data from the Indian subcontinent is sparse. Samples were taken from a STP and from six sampling sites on the Yamuna River. Several antibiotics were tested for using offline solid-phase extraction followed by high-performance liquid chromatography equipped with photodiode array analysis. Recoveries varied from 25.5–108.8 %. Ampicillin had the maximum concentration in wastewater influents (104.2?±?98.11 μg l^?1) and effluents (12.68?±?8.38 μg l^?1). The fluoroquinolones and cephalosporins had the lower concentrations. Treatment efficiencies varied between 55 and 99 %. Significant amounts of antibiotics were discharged in effluents and were detected in the receiving water body. The concentration of antibiotics in the Yamuna River varied from not detected to 13.75 μg l^?1 (ampicillin) for the compounds investigated.     

Incidence of metal and antibiotic resistance in Pseudomonas spp. from the river water, agricultural soil irrigated with wastewater and groundwater

A total of 144 isolates of Pseudomonas spp. (48 each from the Yamuna River water, wastewater irrigated soil and groundwater irrigated soil) were tested for their resistance against certain heavy metals and antibiotics. Minimum inhibitory concentrations (MICs) of Hg^2?+?, Cd^2?+?, Cu^2?+?, Zn^2?+?, Ni^2?+?, Pb^2?+?, Cr^3?+? and Cr^6?+? for each isolate were also determined. A maximum MIC of 200 ??g/ml for mercury and 3,200 ??g/ml for other metals were observed. The incidences of metal resistance and MICs of metals for Pseudomonas isolates from the Yamuna water and wastewater irrigated soil were significantly different to those of groundwater irrigated soil. A high level of resistance against tetracycline and polymyxin B (81.2%) was observed in river water isolates. However, 87.5% of Pseudomonas isolates from soil irrigated with wastewater showed resistance to sulphadiazine, whereas 79.1% were resistant to both ampicillin and erythromycin. Isolates from soil irrigated with groundwater exhibited less resistance towards heavy metals and antibiotics as compared to those of river water and wastewater irrigated soil. Majority of the Pseudomonas isolates from water and soil exhibited resistance to multiple metals and antibiotics. Resistance was transferable to recipient Escherichia coli AB2200 strains by conjugation. Plasmids were cured with the curing agent ethidium bromide and acridine orange at sub-MIC concentration.     

Monitoring of Aerial Pollutants Emitted from Swine Houses in Korea

This on-site survey study was performed to determine the concentrations and emissions of aerial contaminants in the different types of swine houses in Korea and then to present beneficial information available for Korean pig producers to manage optimal air quality in swine house. The swine houses investigated in this research were selected based on three criteria; manure removal system, ventilation mode and growth stage of swine. Mean concentrations of aerial pollutants in swine houses were 8 ppm for ammonia, 300 ppb for hydrogen sulfide, 2 mg m⁻³ for total dust, 0.6 mg m⁻³ for respirable dust, 4 log(cfu m⁻³) for total airborne bacteria and 3 log(cfu m⁻³) for total airborne fungi, respectively. Mean emissions based on pig (liveweight; 75 kg) and area (m²) were 250 and 340 mg h⁻¹ for ammonia, 40 and 50 mg h⁻¹ for hydrogen sulfide, 40 and 50 mg h⁻¹ for total dust, 10 and 15 mg h⁻¹ for respirable dust, 1.0 and 1.3 log(cfu) h⁻¹ for total airborne bacteria and 0.7 and 1.0 log(cfu) h⁻¹ for total airborne fungi, respectively. In general concentrations and emissions of gases were relatively higher in the swine houses managed with deep-pit manure system with slats and mechanical ventilation mode than the different swine housing types whereas those of particulates and bioaerosol were highest in the naturally ventilated swine houses with deep-litter bed system.     

成都双流国际机场大气污染物排放清单与时空分布特征

基于成都双流国际机场活动水平数据,采用排放因子法和计算模型等,编制了机场大气污染物排放清单,并完成了时空分配和不确定性分析,建立了高分辨率网格化排放清单。结果表明,成都双流国际机场标准起飞着陆(LTO)循环数为2.4×10~5次/a,CO、VOCs、NO_x、PM_(10)、PM_(2.5)、SO_2排放量分别为1.2×10~3、1.3×10~2、2.1×10~3、2.8×10、2.7×10、2.5×10~2t/a,且主要由飞机发动机排放;活动水平数据仅包括LTO循环数和地面保障设备两部分;污染物排放分布和跑道类型相关性较高;排放清单活动水平数据可靠性较高,而排放因子存在一定的不确定性。     

Occurrences of six steroid estrogens from different effluents in Beijing, China

Concentration levels of six natural and anthropogenic origin steroid estrogens, namely, diethylstilbestrol (DES), estrone (E1), estradiol (E2), estriol (E3), ethinylestradiol (EE2), and estradiol-17-valerate (Ev), from different effluents in Beijing were assessed. Sampling sites include two wastewater treatment plants (WWTPs), a chemical plant, a hospital, a pharmaceutical factory, a hennery, and a fish pool. In general, concentrations of estrogens in the effluents varied from no detection (nd) to 11.1 ng/l, 0.7 to 1.2 × 10³ ng/l, nd to 67.4 ng/l, nd to 4.1 × 10³ ng/l, nd to 1.2 × 10³ ng/l, and nd to 11.2 ng/l for DES, E1, E2, EE2, E3, and Ev, respectively. The concentration levels of steroid estrogens from different effluents decreased in the order of pharmaceutical factory and WWTP inlets > hospital > hennery > chemical factory > fish pool. This study indicated that natural estrogens E1, E2, and E3 and synthetic estrogen EE2 are the dominant steroid estrogens found in the different Beijing effluents. For source identification, an indicator (hE = E3/(E1 + E2 + E3)) was used to trace human estrogen excretion. Accordingly, hE in effluents from the hospital and WWTP inlets exceeded 0.4, while much smaller values were obtained for the other effluents. Human excretions were the major contributor of natural estrogens in municipal wastewater. Estimation results demonstrated that direct discharge was the major contributor of steroid estrogen pollution in receiving waters.     

Radioactive Contamination Control by Atmospheric Dispersion Assessment of Airborne Indicator Contaminants: Numerical Model Validation

In this work, a numerical model is proposed to estimate air concentration of released airborne radioactive contaminants ¹³¹I and ¹³⁷Cs. A Gaussian dispersion model is used to assess the atmospheric dispersion of radioactive contaminants released continuously from a nuclear power plant as a result of an accident. The model uses various input parameters such as source height, release rate, stability class, wind speed, and wind direction. The validation of the model was carried out by comparing its predicted values with published experimental data. The model was extensively tested by simulating several accidental situations. The main conclusion drawn from these tests is that for large downwind distances from the release point, the contaminant concentrations predicted by the model diverge drastically from measured data, while for short distances, the predicted values generally agree quite well with experimental data. The obtained activity concentrations range from 1.57?×?10² to 6.43?×?10³ Bq/m³ for ¹³¹I and from 3.18?×?10^?2 to 9.72?×?10² Bq/m³ for ¹³⁷Cs. The estimated standard deviation coefficients values range of 7.2 to 6847.7 m, and the maximum absolute error predicted by the model for these parameters was less than 5%.     

杭州市大气污染物排放清单及特征

以杭州市区为研究区域,通过调查整合多套污染源数据库及其他统计资料,研究文献报道及模型计算的各种污染源排放因子,获得杭州市区各行业PM10、PM2.5、SO2、NOx、CO、VOCs、NH3等污染物的排放量,建立了杭州市区2010年1 km×1 km大气污染物排放清单。结果表明,2010年杭州市区PM10、PM2.5、SO2、NOx、CO、VOCs和NH3的排放总量分别为7.96×104、4.02×104、7.23×104、8.98×104、73.90×104、39.56×104、3.32×104t。从排放源的行业分布来看,机动车尾气排放是杭州市区大气污染物最重要排放源之一,对PM10、PM2.5、NOx、CO和VOCs的贡献分别达到14.4%、27.1%、40.3%、21.4%、31.1%。道路扬尘、电厂锅炉、工业炉窑、植被、畜禽养殖对不同污染物分别有着重要贡献,道路扬尘对PM10和PM2.5的贡献分别为44.6%和20.0%、电厂锅炉对SO2和NOx的贡献分别为37.0%和25.7%、工业炉窑对CO的贡献为41.5%、植被排放对VOCs的贡献为27.1%、畜禽养殖对NH3的贡献为76.5%。从空间分布来看,萧山区和余杭区对SO2、NH3和植被排放BVOC的贡献要显著高于主城区;而主城区机动车对PM2.5、NOx和VOCs的贡献分别达到36.3%、56.0%和47.4%,较市区范围内显著增加,表明机动车尾气排放已成为杭州主城区大气污染最重要的来源之一。     

Determination of micropollutants in combined sewer overflows and their removal in a wastewater treatment plant (Seoul,South Korea)

The present study investigated the occurrence of 29 selected micropollutants such as endocrine disrupting compounds (EDCs) and pharmaceuticals and personal care products (PPCPs) in surface waters and wastewaters in Seoul (South Korea) during both dry and wet weather conditions. The study area was selected based on the lack of available information regarding the suspected contamination of rivers/creeks by EDCs and PPCPs in the Seoul region and the presence of a wastewater treatment plant (WWTP), which serves approximately 4.1 million inhabitants and has a design capacity of 1,297?×?10³ m³/day. Many target compounds (83 %) were detected in samples collected from wastewater treatment influent/effluent, creek water, and combined sewer overflow (CSO). The total EDC/PPCP concentrations were as follows: WWTP influent (69,903 ng/L)?>?WWTP effluent (50,175 ng/L) >3 creek samples (16,035–44,446 ng/L) during dry weather, and WWTP influent (53,795 ng/L)?>?WWTP bypass (38,653 ng/L) >5 creek samples (15,260–29,113 ng/L) >2 CSO samples (11,109–11,498 ng/L) during wet weather. EDCs and PPCPs were found to be present at high daily loads (65.1 and 69.8 kg/day during dry and wet weather, respectively) in the WWTP effluent. Compound removal by the WWTP varied significantly by compound: caffeine, diclofenac, ibuprofen, naproxen, and propylparaben (>90 %), and acesulfame, DEET, iohexol, iopromide, and iopamidol (<5 %). These findings and literature information support the hypothesis that the efficiency of removal of EDCs and PPCPs is strongly dependent on both removal mechanism (e.g., biodegradation, adsorption to sludge, and oxidation by chlorine) and compound physicochemical properties (e.g., pK _a and hydrophobicity).     

Assessment of indoor airborne contamination in a wastewater treatment plant

The main objective of this work was to quantify and characterize the major indoor air contaminants present in different stages of a municipal WWTP, including microorganisms (bacteria and fungi), carbon dioxide, carbon monoxide, hydrogen sulfide ammonia, formaldehyde, and volatile organic compounds (VOCs). In general, the total bacteria concentration was found to vary from 60 to >52,560 colony-forming units (CFU)/m³, and the total fungi concentration ranged from 369 to 14,068 CFU/m³. Generally, Gram-positive bacteria were observed in higher number than Gram-negative bacteria. CO₂ concentration ranged from 251 to 9,710 ppm, and CO concentration was either not detected or presented a level of 1 ppm. H₂S concentration ranged from 0.1 to 6.0 ppm. NH₃ concentration was <2 ppm in most samples. Formaldehyde was <0.01 ppm at all sampling sites. The total VOC concentration ranged from 36 to 1,724 μg/m³. Among the VOCs, toluene presented the highest concentration. Results point to indoor/outdoor ratios higher than one. In general, the highest levels of airborne contaminants were detected at the primary treatment (SEDIPAC 3D), secondary sedimentation, and sludge dehydration. At most sampling sites, the concentrations of airborne contaminants were below the occupational exposure limits (OELs) for all the campaigns. However, a few contaminants were above OELs in some sampling sites.     

广州市大气VOCs污染特征及O3生成潜势分析

利用手工及自动监测数据,结合最大增量反应活性(MIR)系数法,对广州市大气挥发性有机物(VOCs)污染特征及臭氧生成潜势(OFP)进行了研究。结果表明：广州市大气VOCs总体积分数为73.85×10^-9,其中,丙烷、甲醛、乙酸乙酯的体积分数最高,分别为5.59×10^-9、4.87×10^-9、4.25×10^-9。组成特征分析结果显示,含氧挥发性有机物(OVOCs)和烷烃为主要污染物种类,分别贡献了总VOCs的34.32%和32.34%。在空间分布上,各站点VOCs体积分数自南向北不断降低,番禺市桥站(南部,76.16×10^-9)>公园前站(中部,75.58×10^-9)>花都梯面站(北部,69.80×10^-9)。广州市大气中甲醛和乙醛的比值为1.22,表明本地排放对广州市醛酮类化合物的贡献较大;乙苯和间/对-二甲苯的比值为0.35,表明广州市气团老化程度低,VOCs主要受本地排放影响;甲苯和苯的比值显示,公园前站苯系物主要受机...     

Testing differences in methods of preparing moss samples

The main objective of this research was to estimate the total mass of nitrogen discharged from various sources in Korea using the mass balance approach. Three different nitrogen mass balances were presented: (1) agricultural activities including raising crops and animal husbandry; (2) domestic activities, and (3) activities in forest and urban areas. These nitrogen balances were combined to estimate riverine discharge of nitrogen to the ocean in national scale. Nitrogen inputs include atmospheric deposition, biological nitrogen fixation, application of inorganic fertilizers/manures, animal feed/imported foodstuffs, and meat/fish. Nitrogen outputs include ammonia volatilization, denitrification, human/animal waste generation, crop/meat production, and riverine discharge to the ocean. The estimated total nitrogen input in Korea was 1,194.5 × 10³ tons N/year. Nitrogen discharged into rivers was estimated as 408–422 × 10³ tons N/year, of which 66–71% was diffuse in origin. The estimated diffuse discharges for land uses were estimated as 82 × 10³ tons N/year from agricultural areas, 7 × 10³ tons N/year from forestry and 75 × 10³ tons N/year from urban and industrial areas.     

Density assessment and mapping of microorganisms around a biocomposting plant in Sanandaj,Iran

Exposure to microorganisms can cause various diseases or exacerbate the excitatory responses, inflammation, dry cough and shortness of breath, reduced lung function, chronic obstructive pulmonary disease, and allergic response or allergic immune. The aim of the present study was to investigate the density of microorganisms around the air of processing facilities of a biocomposting plant. Each experiment was carried out according to ASTM E884-82 (2001) method. The samples were collected from inhaled air in four locations of the plant, which had a high traffic of workers and employees, including screen, conveyor belt, aerated compost pile, and static compost pile. The sampling was repeated five times for each location selected. The wind speed and its direction were measured using an anemometer. Temperature and humidity were also recorded at the time of sampling. The multistage impactor used for sampling was equipped with a solidified medium (agar) and a pump (with a flow rate of 28.3 l/m) for passing air through the media. It was found that the mean density of total bacteria was >1.7 × 10³ cfu/m³ in the study area. Moreover, the mean densities of fungi, intestinal bacteria (Klebsiella), and Staphylococcus aureus were 5.9 × 10³, 3.3 × 10³, and 4.1 × 10³ cfu/m³, respectively. In conclusion, according to the findings, the density of bacteria and fungi per cubic meter of air in the samples collected around the processing facilities of the biocomposting plant in Sanandaj City was higher than the microbial standard for inhaled air.     

Behaviour and Quantification Studies of Terbacil and Lenacil in Environmental Samples Using Cyclic and Adsorptive Stripping Voltammetry at Hanging Mercury Drop Electrode

The cyclic voltammograms of terbacil and lenacil at the hanging mercury drop electrode showed a single well defined four electron irreversible peak in universal buffer of pH 4.0 for both compounds. The peak potentials were shifted to more negative values on the increase of pH of the medium, implying the involvement of protons in the electrode reaction and that the proton transfer reaction precedes the proper electrode process. The four electron single peak may be attributed to the simultaneous reduction of carbonyl groups present in 2 and 4 in pyrimidine ring of terbacil and lenacil to the corresponding hydroxy derivative. Based on the interfacial adsorptive character of the terbacil and lenacil onto the mercury electrode surface, a simple sensitive and low cost differential pulse adsorptive stripping voltammetric procedure was optimized for the analysis of terbacil and lenacil. The optimal operational conditions of the proposed procedure were accumulation potential E _acc = −0.4 V, accumulation time t _acc = 80 s, scan rate = 40 mV s⁻¹, pulse amplitude = 25 mV using a universal buffer pH 4.0 as a supporting electrolyte. The linear concentration range was found to be 1.5 × 10⁻⁵ to 1.2 × 10⁻⁹ mol/l and 1.5 × 10⁻⁵ to 2.5 × 10⁻⁸ mol/l with the lower detection limit of 1.22 × 10⁻⁹ and 2.0 × 10⁻⁸ mol/l. The correlation coefficient and relative standard deviation values are found to be 0.942, 0.996, 1.64% and 1.23%, respectively, for 10 replicants. The procedure was successfully applied for determination of terbacil and lenacil in formulations, mixed formulations, environmental samples such as fruit samples and spiked water samples.     

城市大气颗粒物表面半醌自由基的测定方法

采集上海市城区和郊区2个典型站位的大气颗粒物样品,以二氯甲烷作萃取溶剂,采用索氏抽提法萃取分离吸附在颗粒物表面的稳定自由基,并利用电子自旋共振波谱技术(ESR)分析测定其种类和浓度。结果表明,测试样品的波谱特征表现为显著的三重信号峰,且g因子值均为2.002 7~2.004 7,通过与醌类物质的碱性饱和溶液ESR图谱比对,可以推断颗粒物表面至少吸附一种邻位半醌自由基。同时,通过锰标定量的方式估算了闵行和普陀2个采样点颗粒物样品表面的半醌自由基浓度,闵行采样点TSP、PM10和PM2.5表面半醌自由基的平均浓度分别为5.02×105、5.54×105、9.43×105g-1,而普陀采样点的平均浓度分别为2.02×105、3.50×105、7.16×105g-1。     

Selective and sensitive extractive spectrophotometric determination of micro amounts of palladium(II) in spiked samples: using a new reagent N-ethyl-3-carbazolecarbaxaledehydethiosemicarbazone

N-Ethyl-3-cabazolecarboxaldehydethiosemicarbazone (ECCT) is proposed as a new, sensitive and selective complexing reagent for the separation and extractive spectrophotometric determination of palladium(II) at pH: 4.0 to form a yellowish orange colored 1:1 chelate complex, which is very well extracted in to n-butanol. The absorbance was measured at a maximum wavelength, 410 nm. This method obeys Beer’s law in the concentration range 0.0–6.6 μg mL⁻¹ and the correlation coefficient of Pd(II)-ECCT complex is 0.998, which indicates an excellent linearity between the two variables with good molar absorptivity and Sandell’s sensitivity, 1.647 × 10⁴ l mol⁻¹cm⁻¹, 6.49 × 10⁻³ μg cm⁻², respectively. The instability constant of complex calculated from Edmond’s method, 2.724 × 10⁻⁵ was in good agreement with the value calculated from Asmus’ method 2.624 × 10⁻⁵, at room temperature. The precision and accuracy of the method is checked with calculation of relative standard deviation (n = 5), 0.839. Edmond’s method was observed to be a more selective method in the presence of EDTA, oxalate and phosphate ions. The method was successfully applied for the determination of Pd(II) in water samples, synthetic mixtures and hydrogenation catalysts, employing an atomic absorption spectrometer for comparing these results.     

The potential of biogas production from municipal solid waste in a tropical climate

The objective of this study was to estimate the potential of organic municipal solid waste generated in an urban setting in a tropical climate to produce biogas. Five different categories of wastes were considered: fruit waste, food waste, yard waste, paper waste, and mixed waste. These fractions were assessed for their efficiency for biogas production in a laboratory-scale batch digester for a total period of 8 weeks at a temperature of 15–30 °C. During this period, fruit waste, food waste, yard waste, paper waste, and mixed waste were observed to produce 0.15, 0.17, 0.10, 0.08, and 0.15 m³ of biogas per kilogram of volatile solids, respectively. The biogas produced and caloric value of each feedstock was in the range of 1.25?×?10^?3 m³ (17 kWh)/cap/day (paper waste) to 15?×?10^?3 m³ (170 kWh)/cap/day (mixed waste). Paper waste produced the least (<1×10^?3(<17.8 kWh)/cap/day), and mixed waste produced the highest methane yield (10?×?10^?3 m³ (178 kWh)/cap/day). Thus, mixed waste was found to be more efficient than other feedstocks for biogas and methane production; this was mainly related to the better C/N ratio in mixed waste. Taking the total waste production in Jimma into account, the total mixed organic solid waste could produce 865?×?10³ m³ (5.4 m³/capita) of biogas or 537?×?10³ m³ (3.4 m³/capita) of methane per year. The total caloric value of methane production potential from mixed organic municipal solid waste was many times higher than the total energy requirement of the area.