Value chain for next-generation biofuels: resilience and sustainability of the product life cycle

Multiple factors including climate change, price uncertainties, and geopolitical instability have prompted many industries to investigate the feasibility of replacing traditional petroleum-based fuels with biofuel alternatives. However, to make this transition successful, these new biofuels must be environmentally sustainable and the necessary support infrastructure must be in place to make the production, distribution, and storage of these biofuels technologically feasible and cost effective. Developing a value chain, spanning from feedstock production to distribution to end users, requires garnering buy-in from multiple stakeholders by demonstrating environmental, economic, and social benefits and incentives. Two critical factors are the environmental benefits achieved from the use of the biofuel technology and the degree of resilience of the value chain to emergent conditions to ensure steady supply to consumers. Moreover, different biofuel pathways have different costs, benefits, and risks which must be compared. In this paper, we describe how environmental sustainability can be modeled using life cycle assessment (LCA) and how the resilience of value chain initiatives can be modeled using a scenario-based decision model. We then describe how sustainability and resilience assessments can be integrated in an iterative, anticipatory LCA framework. These assessments can be used as the basis for a business case for various investments, as well as a means for promoting responsible innovations, with the aviation industry used as a case study.     

Comparison of jatropha and karanja biofuels on their combustion characteristics

Biofuel blends produced from Jatropha (Jatropha curcas) and Karanja (Pongamia pinnata) oil were evaluated for their combustion properties. Two kinds of blends (regular diesel with Jatropha and Karanja oil) were prepared at 20% volume to the diesel and tested as alternative fuels in single cylinder (vertical), water-cooled, direct injection diesel engine at the rated speed of 1500 rpm. The performance of the engine in terms of thermal efficiency at full load for diesel was 30%. For Jatropha and Karanja biodiesel blends, the thermal efficiencies were 29.0% and 28.6%, respectively. The maximum cylinder pressure and ignition delay for biodiesel fuel blends are very close to that of regular diesel. Prolonged combustion was observed for Karanja oil blend in comparison to Jatropha oil blend. The combustion pattern also reveals the slow burning characteristics of vegetable oils and this study indicates that the blended biofuels have combustion characteristics that are similar to regular diesel fuels.     

Future U.S. Water Consumption: The Role of Energy Production1

Elcock, Deborah, 2010. Future U.S. Water Consumption: The Role of Energy Production. Journal of the American Water Resources Association (JAWRA) 46(3):447-460. DOI: 10.1111/j.1752-1688.2009.00413.x Abstract: This study investigates how meeting domestic energy production targets for both fossil and renewable fuels may affect future water demand. It combines projections of energy production developed by the U.S. Department of Energy with estimates of water consumption on a per-unit basis (water-consumption coefficients) for coal, oil, gas, and biofuels production, to estimate and compare the domestic freshwater consumed. Although total domestic freshwater consumption is expected to increase by nearly 7% between 2005 and 2030, water consumed for energy production is expected to increase by nearly 70%, and water consumed for biofuels (biodiesel and ethanol) production is expected to increase by almost 250%. By 2030, water consumed in the production of biofuels is projected to account for nearly half of the total amount of water consumed in the production of all energy fuels. Most of this is for irrigation, and the West North Central Region is projected to consume most of this water in 2030. These findings identify an important potential future conflict between renewable energy production and water availability that warrants further investigation and action to ensure that future domestic energy demand can be met in an economically efficient and environmentally sustainable manner.     

Estimation of annual CH4 and N2O emissions from fluidised bed combustion: An advanced measurement-based method and its application to Finland

The aim of this study was to develop and apply an advanced, measurement based method for the estimation of annual CH₄ and N₂O emissions and thus gain improved understanding on the actual greenhouse gas (GHG) balances of combustion of fossil fuels, peat, biofuels and REF. CH₄ and N₂O emissions depend strongly on combustion conditions, and therefore the emission factors used in the calculation of annual emissions contain significant uncertainties. Fluidised bed combustion (FBC) has many good properties for combustion of different types of fuels and fuels of varying quality, e.g., biofuels and wastes. Therefore, it is currently increasing its market share. In this study, long term measurements (up to 50 days) were carried out at seven FBC boilers representing different size classes, loadings and fuel mixes. Both decreasing load and increasing share of coal in fuel mix increased N₂O emissions. Measurement results from different loading levels were combined with the common loading curves of similar plants in Finland to estimate annual emissions. Based on the results, recommendations for emission factors for the Finnish GHG emission inventory are given. The role of FBC as a potential technology for the utilisation of biofuels and wastes with future GHG reduction requirements is discussed.     

Emissions from burning biofuels in metal cookstoves

Promoting stoves that burn wood and other biofuels more efficiently is one of the means to reduce fuel consumption, but such efficient stoves may also emit more carbon monoxide and total suspended particulates. In an earlier study, a standard chamber method was proposed to estimate emission factors from burning fuelwood (Acacia nilotica). Here that methodology is extended to measure emission factors from burning of dungcakes and crop residues (Brassica or mustard stalks)—common fuels in many developing countries. The amounts of carbon monoxide (CO) and total suspended particulates (TSP) emitted by four different models of stoves, when using each of the three biofuels, are measured.The CO emission factors range from 13–68 (g/kg) for fuelwood to 26–67 g/kg for dungcakes and 20–114 g/kg for crop residues, for particulates they range from 1.1–3.8 to 4.1–7.8 and 2.1–12.0 g/kg for the three fuels, respectively. On a per unit heat delivered basis, the emissions of CO and TSP from both dungcakes and crop residues are two to three times higher compared to those from fuelwood. While for some improved stove-fuel combinations, the increase in emission factors was offset by the increase in thermal efficiency, this was not always so and causes a dilemma. The more efficient stoves are found to have higher emission factors of both CO and TSP for all three fuels. Emissions per standard task (i.e, on a unit heat delivered basis) is proposed as a criterion to evaluate cookstoves.     

Environmental Indicators of Biofuel Sustainability: What About Context?

Indicators of the environmental sustainability of biofuel production, distribution, and use should be selected, measured, and interpreted with respect to the context in which they are used. The context of a sustainability assessment includes the purpose, the particular biofuel production and distribution system, policy conditions, stakeholder values, location, temporal influences, spatial scale, baselines, and reference scenarios. We recommend that biofuel sustainability questions be formulated with respect to the context, that appropriate indicators of environmental sustainability be developed or selected from more generic suites, and that decision makers consider context in ascribing meaning to indicators. In addition, considerations such as technical objectives, varying values and perspectives of stakeholder groups, indicator cost, and availability and reliability of data need to be understood and considered. Sustainability indicators for biofuels are most useful if adequate historical data are available, information can be collected at appropriate spatial and temporal scales, organizations are committed to use indicator information in the decision-making process, and indicators can effectively guide behavior toward more sustainable practices.     

Greenhouse gas emissions and energy balance of sunflower biodiesel: Identification of its key factors in the supply chain

The production of first generation biofuels, such as sunflower-based biodiesel, is potentially an option for diversifying the energy matrix in several South American countries. However, biofuels present environmental challenges, especially concerning the reduction of greenhouse gas (GHG) emissions. This study, using a life-cycle approach, evaluates the GHG emissions and energy balance of the future nationwide production of sunflower-based biodiesel in Chile. Direct land use change is included in the analysis. The overall findings indicate that sunflower biodiesel, under the most likely production conditions, will have better environmental performance than fossil diesel in terms of both indicators. The agricultural stage is associated to key factors such as land use change, and nitrogen fertilizers. These factors contribute significantly to GHG emissions or energy demand in the biodiesel life cycle. The sensitivity analysis shows that no GHG emission saving could occur if nitrogen fertilizers rate exceeds 330 kg N/ha. In order to reduce the environmental impacts of this biofuel, improvement measures are suggested.     

生物燃料与西部开发

本文介绍了生物燃料的概况,对国家战略安全,环境保护和区域经济发展的意义,以及技术和应用可行性,把四川建成中国生物燃料的基地。     

A panel study on the relationship between biofuels production and sustainable development

Biomass is one of the renewable energy sources on which policy makers are greatly dependent on since it is a flexible feedstock capable of conversion into electricity, transport liquid fuels and heat by chemical and biological processes on demand. Though numerous publications have examined the relationship of economic growth with renewable energy and other parameters, biomass energy has never been included in these studies. Then, this study examines the causal relationship within a multivariate panel cointegration/error correction framework which combines the cross-section and time series data while allowing for heterogeneity across different provinces. After employing panel data regression model ranging from 2003 through 2012 to examine the relationships of biofuels production with sustainable development in China, the paper concludes that the development of biofuel energy production integrated with the consideration of the improvement of income per capita, and the attraction of more capital investment, does make a significant contribution to economic growth. However, some negative side effects including the increase of greenhouse emissions and the decrease of marginal land still coexist with the economic development. Of course, the importance of these findings lies on their implications and their adoption on strategic policies.     

Extending the EU Renewable Energy Directive sustainability criteria to solid bioenergy from forests

Solid bioenergy from forests plays — and is expected to continue to play — a key role to fulfil the renewable energy targets at the European Union level. When the Renewable Energy Directive was enacted, sustainability criteria were incorporated solely for biofuels and bioliquids. Sustainability criteria for solid bioenergy are also needed in order to prevent wood and primary forest residues from posing additional environmental risks to ecosystems. Acknowledging this, the European Commission has been working on extending the biofuels and bioliquids provisions to solid biomass. An internal draft was circulated in August 2013 which addressed the ways to both balance and mitigate the risks in three main topics: biodiversity; sustainable forest management; and greenhouse gases. This paper presents a set of criteria and indicators, developed during workshops with experts from Governments, scientific institutions, businesses and NGOs, that may be considered by the EU to assure that solid biomass from forests is obtained in an environmentally sustainable way.     

Wistful wilderness: communication about ‘new’ nature in the Netherlands

Based on in-depth interviews, this article presents findings of a study centred on public communication regarding Tiengemeten, a Dutch island previously occupied by farmers. An answer is sought to the question of how visitors to Tiengemeten evaluate, according to their own experiences, the discourse of people involved in Tiengemeten from a policy and communication perspective. This study showed that visitors’ experiences do not always match the emotions appealed to in public communication materials. It is also suggested that people involved from a policy and communication perspective should refrain from using ‘heavily value-laden’ phraseology. For reasons of trust, this article suggests aligning public communication with genuine experiences of visitors. This is also necessary for avoiding scepticism of visitors as policy makers and communication professionals run a risk that public communication regarding nature becomes counterproductive.     

Water Quality Assessment of Large‐scale Bioenergy Cropping Scenarios for the Upper Mississippi and Ohio‐Tennessee River Basins

The Upper Mississippi River Basin and Ohio‐Tennessee River Basin comprise the majority of the United States Corn Belt region, resulting in degraded Mississippi River and Gulf of Mexico water quality. To address the water quality implications of increased biofuel production, biofuel scenarios were tested with a Soil and Water Assessment Tool (SWAT) model revision featuring improved biofuel crop representation. Scenarios included corn stover removal and the inclusion of two perennial bioenergy crops, switchgrass and Miscanthus, grown on marginal lands (slopes >2% and erosion rates >2 t/ha) and nonmarginal lands. The SWAT model estimates show water quality is not very sensitive to stover removal. The perennial bioenergy crops reduce simulated sediment, nitrogen (N), and phosphorus (P) yields by up to 60%. Simulated sediment and P reductions in marginal lands were generally twice that occurring in the nonmarginal lands. The highest unit area reductions of N occurred in the less sloping tile‐drained lands. Productivity showed corn grain yield was independent from stover removal, while yields of the two perennial bioenergy crops were similar in the marginal and nonmarginal lands. The results suggest planning for biofuel production in the Corn Belt could include the removal of stover in productive corn areas, and the planting of perennial bioenergy crops in marginal land and in low‐sloped tile‐drained areas characterized by high N pollution. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.     

Auto-adaptive Air Distribution and Structure Optimization of Ejector Burner for Biomass Alcohol Fuels

A plenty of studies on the utilization of biomass alcohol fuels have been conducted, but combustion efficiency and stability of this fuels still need to be improved. Based on biomass alcohol fuels (bio-methanol and bio-ethanol), this paper studied auto-adaptive air distribution characteristics and optimum structure parameters of an ejector burner by numerical simulation method. Also, an experiment was conducted to verify the numerical results. The results show that the mole air entrainment ratio (MAER) keeps almost constant when the ejector fuel nozzle exit locates at the segment between the ejector throat and the suction chamber entrance, but a bigger ratio α would lead to a higher MAER till the α is bigger than 8.5 for bio-methanol and 11.5 for bio-ethanol. The bio-ethanol fuel is more beneficial for air carrying role because of its big molecular weight. Operation pressure (P_w) has a little impact on MAER of the two fuels, but the rise of back pressure (P_b) would lead to rapid decrease of MAER for the two fuels. For the optimum structure burners, the MAER can be maintained at the value of theoretical complete combustion. Its changing rate is less than 2.3% for bio-methanol and 2.5% for bio-ethanol when the burner load changes from 30% to 120%, which is highly consistent with the experimental results. The optimum burner can distribute air supply automatically with the changing of burner load.     

Assessment of Bioenergy Cropping Scenarios for the Boone River Watershed in North Central Iowa,United States

Several biofuel cropping scenarios were evaluated with an improved version of Soil and Water Assessment Tool (SWAT) as part of the CenUSA Bioenergy consortium for the Boone River Watershed (BRW), which drains about 2,370 km² in north central Iowa. The adoption of corn stover removal, switchgrass, and/or Miscanthus biofuel cropping systems was simulated to assess the impact of cellulosic biofuel production on pollutant losses. The stover removal results indicate removal of 20 or 50% of corn stover in the BRW would have negligible effects on streamflow and relatively minor or negligible effects on sediment and nutrient losses, even on higher sloped cropland. Complete cropland conversion into switchgrass or Miscanthus, resulted in reductions of streamflow, sediment, nitrate, and other pollutants ranging between 23‐99%. The predicted nitrate reductions due to Miscanthus adoption were over two times greater compared to switchgrass, with the largest impacts occurring for tile‐drained cropland. Targeting of switchgrass or Miscanthus on cropland ≥2% slope or ≥7% slope revealed a disproportionate amount of sediment and sediment‐bound nutrient reductions could be obtained by protecting these relatively small areas of higher sloped cropland. Overall, the results indicate that all biofuel cropping systems could be effectively implemented in the BRW, with the most robust approach being corn stover removal adopted on tile‐drained cropland in combination with a perennial biofuel crop on higher sloped landscapes. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.     

A review on the production of fermentable sugars from lignocellulosic biomass through conventional and enzymatic route—a comparison

The scarcity of fossil fuels has urged the economically developed countries to find the resources for an alternative energy sources. In apprehension to this, biofuels, like bioethanol and biobutanol, produced from lignocellulosic biomass were considered as potential alternative. There are several methods for the pretreatment of biomass before it is being used as a feedstock for the production of fermentable sugars. However, one of the crucial concerns here is to enumerate an economic pretreatment scheme that can be implemented in large scale for the production of mostly exposed cellulosic part from biomass. This will ensure an effective hydrolysis of cellulose for the production of fermentable sugars and the production of biobutanol from these derived sugars. Moreover, the keynote understanding of an effective fermentation is the production of less inhibitory compounds like furfural, hydroxymethyl furfural during the hydrolysis of cellulose. Enzymatic hydrolysis of cellulose was reported as the most efficient method is this aspect. Trichoderma sp. was found the mostly used resources for the enzyme called cellulase and Aspergillus sp. for hemicellulase enzymes. The most crucial part here is the isolation of proper enzyme that will increase the rate of hydrolysis. Moreover, selection of proper pretreatment process will be a key benefit to the production of fermentable sugars through enzymatic hydrolysis. Based on the biomass nature, the evaluated hot water pretreatment followed by enzymatic hydrolysis with a provision of enzyme reusability (like encapsulated or enzyme separation with membrane) seems to be promising for enhanced biofuel-production.     

Turkish Sugar Production Potential and Use of Waste of Sugar Beet as Energy Source

Abstract

Biomass energy is the most renewable energy resource in the world. Biomass energy is derived from plant and animal material, such as wood from forests, residues from agricultural and forestry processes, and industrial, human or animal wastes. The production of biofuels such as ethanol and biodiesel has the potential to replace significant quantities of fossil fuels in many transport applications, electricity, generate heat and steam, etc. In this study, Turkish sugar sector and sugar capacity, residue quantitiy and its possibility of utilization is examined.     

Using Topography to Meet Wildlife and Fuels Treatment Objectives in Fire-Suppressed Landscapes

Past forest management practices, fire suppression, and climate change are increasing the need to actively manage California Sierra Nevada forests for multiple environmental amenities. Here we present a relatively low-cost, repeatable method for spatially parsing the landscape to help the U.S. Forest Service manage for different forest and fuel conditions to meet multiple goals relating to sensitive species, fuels reduction, forest products, water, carbon storage, and ecosystem restoration. Using the Kings River area of the Sierra Nevada as a case study, we create areas of topographically-based units, Landscape Management Units (LMUs) using a three by three matrix (canyon, mid-slope, ridge-top and northerly, southerly, and neutral aspects). We describe their size, elevation, slope, aspect, and their difference in inherent wetness and solar radiation. We assess the predictive value and field applicability of LMUs by using existing data on stand conditions and two sensitive wildlife species. Stand conditions varied significantly between LMUs, with canyons consistently having the greatest stem and snag densities. Pacific fisher (Martes pennanti) activity points (from radio telemetry) and California spotted owl (Strix occidentalis occidentalis) nests, roosts, and sightings were both significantly different from uniform, with a disproportionate number of observations in canyons, and fewer than expected on ridge-tops. Given the distinct characteristics of the LMUs, these units provide a relatively simple but ecologically meaningful template for managers to spatially allocate forest treatments, thereby meeting multiple National Forest objectives. These LMUs provide a framework that can potentially be applied to other fire-dependent western forests with steep topographic relief.     

Older rural women living with drought

ABSTRACT

Women’s experiences of drought are often made invisible particularly in terms of their long-term effects. Drought differs from other “natural disasters” in that droughts are, by definition, experienced over an extended time. This means those experiencing drought do so as they age, with elderly cohorts particularly vulnerable. As such, there is a need to better understand the longitudinal needs and experiences of women living with drought. This study investigates the experiences of drought for 15 Australian women aged over 70, over a period of 12 years. Longitudinal qualitative free-text comments written by the oldest cohort of women in the Australian Longitudinal Study on Women’s Health were subject to a thematic analysis. Findings indicate that experiences of drought have a relationship to women’s ability to age in ways they may have hoped. Themes of Work and Physical activity, Connection to place, and, Service access were prominent in women’s comments. These results demonstrate that place is an important aspect in the experience of ageing, that work and physical activity often intensify during drought for elderly people who might otherwise be expecting to retire, and that drought presents particular challenges for older women in terms of access to services. This study highlights the complex interactions of living and ageing in drought for Australian women.     

Basis of energy crop selection for biofuel production: Cellulose vs. lignin

This paper investigates the suitability of Jerusalem artichoke (Helianthus tuberosus L.), fiber hemp (Cannabis sativa L.), energy sunflower (Helianthus annuus L.), Amur silver-grass (Miscanthus sacchariflorus), and energy grass cultivar (cv) Szarvasi-1 for biofuel production in Northern climatic conditions. Above ground biomass, bioethanol production yield, and methane production yield are used as indicators to assess the bio-energy potential of the culture. Results presented show that energy crops of Southern origin produce 30–70% less biomass than in the origin region. Nonetheless, both perennial and annual energy crops produce high above ground biomass yields (660–1280 g m^–2) for Northern climatic conditions. Experimental results show that bioethanol yield is dependent on cellulose content of the biomass. The higher the cellulose content, the higher the bioethanol yield. The biogas production on the other hand, depends on lignin content. The lower the lignin content the higher the biogas yield. Therefore, the selection of the energy crop for bioethanol production should be based on high cellulose content, while for biogas production it should rather be based on the low lignin content.