从锦纶6生产废水中回收己内酰胺技术的改进

采用三效蒸发－间歇蒸馏技术,从锦纶６生产装置的萃取废水中回收已内酰胺。通过对三效蒸发工艺澈听改进,降低了蒸发冷凝水中已内酰胺单体含量,使蒸发冷凝水全部回用于萃取系统,萃取废水已内酰胺单体的回收率达到９９％。     

利用磷渣制白炭黑

研究了采用沉淀法由磷渣制白炭黑的工艺条件。在最佳工艺条件下，白炭黑的收率为８３．３％，二氧化硅的质量分数达９４．５％，产品质量符合ＧＢ１０５１７－８９要求。     

万山汞矿区土壤重金属污染特征及来源解析

以万山汞矿区土壤为研究对象,采用电感耦合等离子体质谱仪和原子荧光光谱仪测定土壤中的重金属含量,分别运用内梅罗综合污染指数（NPI）法和潜在生态风险指数（RI）法评价土壤重金属污染和潜在生态风险,并应用相关性分析、主成分分析和聚类分析对土壤重金属来源进行分析。结果表明：土壤Hg、Cd、As、Pb、Cu、Ni和Zn出现不同程度累积,分别达贵州省背景值的263.61、2.31、1.28、2.11、1.70、1.01和3.52倍;土壤重金属平均NPI为188.00,属于严重污染水平,Hg是主要污染因子;土壤重金属平均RI为10 655.70,属于极强潜在生态风险水平,Hg是主要潜在生态风险因子;土壤中Cu、Ni、Cr主要源于自然活动,As、Pb、Zn主要源于燃煤和交通运输污染,Cd主要源于农业污染,Hg主要源于汞冶炼污染。     

Prediction of higher heating value of solid fuel produced by hydrothermal carbonization of empty fruit bunch and various biomass feedstock

Journal of Material Cycles and Waste Management - There are many influencing variables when it comes to designing a thermal conversion system for biomass and other fuels. One of the most important...     

An innovative container for WEEE collection and transport: Details and effects following the adoption

The content of hazardous components in Waste arising from Electrical and Electronic Equipment (WEEE) is a major concern that urges governments and industry to take measures to ensure proper treatment and disposal. Thus, the European Union issued directives to encourage reuse, recycling and other proper forms of recovery of such waste while companies and academics are still studying methods and technologies for optimizing recovery processes. This paper presents an analysis of the logistics process assuring the correct collection, handling, transportation and storing of WEEE. The experience comes from an Italian WEEE treatment plant (TRED Carpi S.r.l.) where a new kind of container has been introduced in order to improve the logistics system. An evaluation framework is described and used in order to compare different system configurations and assess the advantages emerging from adopting proper equipments for WEEE transport and handling.     

Investigation of briquetting of metal waste from the bearing industry.

An economical method to process the metal waste that comes from the ball-bearing industry is presented. The purpose of the study was to determine the physical-chemical properties of the material, to present the most suitable binders and identify the factors that can affect briquette strength. The mechanical strength and resistance to gravitational drop were defined for both fresh briquettes and those that had been seasoned. The briquette structure was also tested. On the basis of the results of experimental studies and laboratory trials two techniques for processing the waste from the ballbearing industry on an industrial technological scale were developed. The economic and ecological impacts of these industrial applications were examined. The results of the investigations suggest that the briquettes might be recycled in steel-making furnaces. The reported solution to the problem of management of this type of waste appears to be universal and could also be applied by other waste-related enterprises.     

Transesterification reaction of the fat originated from solid waste of the leather industry

The leather industry is an industry which generates a large amount of solid and liquid wastes. Most of the solid wastes originate from the pre-tanning processes while half of it comes from the fleshing step. Raw fleshing wastes which mainly consist of protein and fat have almost no recovery option and the disposal is costly. This study outlines the possibility of using the fleshing waste as an oil source for transesterification reaction. The effect of oil/alcohol molar ratio, the amount of catalyst and temperature on ester production was individually investigated and optimum reaction conditions were determined. The fuel properties of the ester product were also studied according to the EN 14214 standard. Cold filter plugging point and oxidation stability have to be improved in order to use the ester product as an alternative fuel candidate. Besides, this product can be used as a feedstock in lubricant production or cosmetic industry.     

Cost–benefit analysis of waste reduction in developing countries: a simulation

Waste reduction activities such as recycling, composting, and pig feeding in Peru and other developing countries are mainly informal but already reduce about 15 % of waste generation. Although much research on informal recycling in Latin America recommends partnership with current waste pickers, there is a lack of methodologies on how to systematize these activities. This paper proposes a mathematical model that calculates yields and costs of separate waste collection, and analyzes and measures the effect of improvements such as source separation by residents and location of recycling and composting centers. The analysis finds that the largest effect comes from source separation. In this case, separate collection yield can be increased from the current 30 kg/waste picker/day to about 200 kg/waste picker/day, and the cost can be reduced from 110 US$/t to 20 US$/t. These changes affect the profitability of the recycling and composting business. The environmental and social effects of these improvements are also discussed.     

Life cycle assessment of the waste hierarchy--a Danish case study on waste paper

The waste hierarchy is being widely discussed these days, not only by cost-benefit analysts, but a growing number of life cycle assessments (LCA) have also begun to question it. In this article, we investigate the handling of waste paper in Denmark and compare the present situation with scenarios of more waste being recycled, incinerated or consigned to landfill. The investigations are made in accordance with ISO 14040-43 and based on the newly launched methodology of consequential LCA and following the recent guidelines of the European Centre on Waste and Material Flows. The LCA concerns the Danish consumption of paper in 1999, totalling 1.2 million tons. The results of the investigation indicate that the waste hierarchy is reliable; from an environmental point of view recycling of paper is better than incineration and landfilling. For incineration, the reason for the advantage of landfilling mainly comes from the substitution of fossil fuels, when incinerators provide heat and electricity. For recycling, the advantage is related to the saved wood resources, which can be used for generating energy from wood, i.e., from renewable fuel which does not contribute to global warming.     

平板陶瓷膜回收烟气水热的实验研究

将平板陶瓷膜组成膜组件对烟气水分和余热进行回收,考察了烟气的温度、相对湿度、流速和冷却水温度等参数对膜组件水热回收性能的影响。在实验工况下,水通量和水回收效率随着烟气温度、烟气相对湿度的增加和冷却水温度的降低而上升;水通量随着烟气流速的加快而上升,水回收效率随着烟气流速的加快先上升后降低;膜组件的水通量和水回收效率最高分别可达22.0 kg/(m²·h)和36.3%。平板陶瓷膜回收的热量主要来自烟气潜热,烟气潜热换热量与水通量呈正相关变化趋势。在实验工况下,平板陶瓷膜组件的总传热系数最高为412 W/(m²·℃),高于多通道管式陶瓷膜和单通道管式陶瓷膜。     

Mechanical behavior of typical hazardous waste and its influence on landfill stability during operation

The stability of hazardous waste (HW) landfill is a major security risk to the landfill environmental safety. The mechanical behavior of waste controls many aspects of landfill design and operation, including stability and settlement issues and the integrity of geosynthetic and liner components. This study presents the results of a laboratory experiment to learn the mechanical properties of HW collected from the Hangzhou HW landfill. Measured mechanical behavior was compared with results for municipal solid waste (MSW) to assess their discrepancies. The particle size of HW was analyzed by the sieving and hydrometer methods. Because HW comes primarily from industrial plants in the form of sludge or slag, their particle sizes are generally smaller than those of MSW. This study indicates that the shear strength parameters of HW are more sensitive to the methods of testing and calculation than those of MSW. Numerical simulations demonstrate that the safety factor of a landfill is affected by the mechanical properties of HW, especially cohesion and friction angle. Because of the lower particle size and wider compression ratio, compared to MSW, an HW landfill should be taken more care in its operational procedures so as to increase its stability.     

Modelling nitrogen fluxes at the landscape scale

The distribution and impacts of different nitrogen pollutants are inextricably linked. To understand the problem fully, the interactions between the different pollutants need to be taken into account. This is particularly important when it comes to abatement techniques, since measures to reduce emissions of one nitrogen pollutant can often lead to an increase in another. This project represents a step towards greater understanding of these issues by linking together new and existing nitrogen flux models into a larger framework. The modelling framework has been constructed and some of the nitrogen flows between fields, farms and the atmosphere have been modelled for a UK study area for typical farm management scenarios.     

Modelling nitrogen fluxes at the landscape scale

The distribution and impacts of different nitrogen pollutants are inextricably linked. To understand the problem fully, the interactions between the different pollutants need to be taken into account. This is particularly important when it comes to abatement techniques, since measures to reduce emissions of one nitrogen pollutant can often lead to an increase in another. This project represents a step towards greater understanding of these issues by linking together new and existing nitrogen flux models into a larger framework. The modelling framework has been constructed and some of the nitrogen flows between fields, farms and the atmosphere have been modelled for a UK study area for typical farm management scenarios.     

火电厂烟气汞形态转化机理及控制方法

汞是煤中最易挥发的重金属元素之一,燃烧产物中汞的排放为火电厂锅炉汞污染的主流。烟气中的汞主要采用活性炭或者其他吸附剂、飞灰再循环、湿法烟气脱硫装置等手段来去除,但普遍存在吸附剂价格昂贵、经济效应不高,具体脱除效应不明显、仅适用中小型火电厂锅炉等实际问题。为配合脱汞市场,需要在完善测试手段和控制手段的基础上,着重解决多组分污染物联合脱除汞反应的竞争机制和活性/选择性调控规律、吸收剂固体表面物理化学、大容积/大流量反应器内超低浓度污染物的富集/反应机理等关键技术问题。在火电厂烟气零价汞形态转化机理、汞迁移转化动力学模型的研究以及高效价廉吸附剂的开发等方面取得突破,开发具有自主知识产权的新型燃煤电厂烟气中汞排放控制方法。     

不锈钢酸洗过程中NOx的产生机制及控制

为降低奥氏体不锈钢混酸(HNO_3+HF)酸洗过程中产生的NO_x量,利用自制的酸洗-吸收装置研究了HNO_3和HF质量浓度及抑制剂和促进剂加入量对NO_x生成量的影响,探讨了NO_x的产生机制。结果表明,奥氏体不锈钢酸洗的优化工艺条件为:酸洗温度20～50℃,HNO_3质量浓度90～110 g/L,HF质量浓度40 g/L,抑制剂加入量30 g/L,促进剂加入量1～2 g/L。抑制剂的加入降低了NO_x的生成量,促进剂的加入减少了氧化皮酸洗时间,提高了酸洗效率。酸洗产生的NO_x来源于两部分:一是氧化皮与酸洗液反应,约占NO_x生成量的70%,二是裸露基体与酸洗液反应,约占NO_x生成量的30%。     

Management of MSW in Spain and recovery of packaging steel scrap

Packaging steel is more advantageously recovered and recycled than other packaging material due to its magnetic properties. The steel used for packaging is of high quality, and post-consumer waste therefore produces high-grade ferrous scrap. Recycling is thus an important issue for reducing raw material consumption, including iron ore, coal and energy. Household refuse management consists of collection/disposal, transport, and processing and treatment - incineration and composting being the most widely used methods in Spain. Total Spanish MSW production exceeds 21 million tons per year, of which 28.1% and 6.2% are treated in compost and incineration plants, respectively. This paper presents a comprehensive study of incineration and compost plants in Spain, including a review of the different processes and technologies employed and the characteristics and quality of the recovered ferrous scrap. Of the total amount of packaging steel scrap recovered from MSW, 38% comes from compost plants and 14% from incineration plants. Ferrous scrap from incineration plants presents a high degree of chemical alteration as a consequence of the thermal process to which the MSW is subjected, particularly the conditions in which the slag is cooled, and accordingly its quality diminishes. Fragmentation and magnetic separation processes produce an enhancement of the scrap quality. Ferrous scrap from compost plants has a high tin content, which negatively affects its recycling. Cleaning and detinning processes are required prior to recycling.     

Material and energy recovery from Automotive Shredded Residues (ASR) via sequential gasification and combustion

Shredding is the common end-of-life treatment in Europe for dismantled car wrecks. It produces the so-called Automotive Shredded Residue (ASR), usually disposed of in landfill. This paper summarizes the outcome of a study carried out by Politecnico di Milano and LEAP with the support of Actelios SpA on the prospects of a technology based on sequential gasification and combustion of this specific waste stream. Its application to the treatment of ASR allows the recovery of large fractions of metals as non-oxidized, easily marketable secondary raw materials, the vitrification of most of the ash content and the production of power via a steam cycle. Results show that despite the unfavourable characteristics of ASR, the proposed technology can reach appealing energy performances. Three of four environmental impact indicators and the cumulative energy demand index are favourable, the main positive contributes being electricity production and metal recovery (mainly aluminium and copper). The only unfavourable indicator is the global warming index because, since most of the carbon in ASR comes from fossil sources, the carbon dioxide emissions at the stack of the thermal treatment plant are mainly non-renewable and, at the same time, the avoided biogas production from the alternative disposal route of landfilling is minor.     

Recovery of yttrium from cathode ray tubes and lamps’ fluorescent powders: experimental results and economic simulation

In this paper, yttrium recovery from fluorescent powder of lamps and cathode ray tubes (CRTs) is described. The process for treating these materials includes the following: (a) acid leaching, (b) purification of the leach liquors using sodium hydroxide and sodium sulfide, (c) precipitation of yttrium using oxalic acid, and (d) calcinations of oxalates for production of yttrium oxides.Experimental results have shown that process conditions necessary to purify the solutions and recover yttrium strongly depend on composition of the leach liquor, in other words, whether the powder comes from treatment of CRTs or lamp. In the optimal experimental conditions, the recoveries of yttrium oxide are about 95%, 55%, and 65% for CRT, lamps, and CRT/lamp mixture (called MIX) powders, respectively. The lower yields obtained during treatments of MIX and lamp powders are probably due to the co-precipitation of yttrium together with other metals contained in the lamps powder only. Yttrium loss can be reduced to minimum changing the experimental conditions with respect to the case of the CRT process. In any case, the purity of final products from CRT, lamps, and MIX is greater than 95%.Moreover, the possibility to treat simultaneously both CRT and lamp powders is very important and interesting from an industrial point of view since it could be possible to run a single plant treating fluorescent powder coming from two different electronic wastes.     

Influence of the recycled material percentage on the rheological behaviour of HDPE for injection moulding process

The amount of polymer material wasted during thermoplastic injection moulding is very high. It comes from both the feed system of the part, and parts necessary to set up the mould, as well as the scrap generated along the process due to quality problems. The residues are managed through polymer recycling that allows reuse of the materials in the manufacturing injection process. Recycling mills convert the parts into small pieces that are used as feed material for injection, by mixing the recycled feedstock in different percentages with raw material. This mixture of both raw and recycled material modifies material properties according to the percentage of recycled material introduced. Some of the properties affected by this modification are those related to rheologic behaviour, which strongly conditions the future injection moulding process. This paper analyzes the rheologic behaviour of material with different percentages of recycled material by means of a capillary rheometer, and evaluates the influence of the corresponding viscosity curves obtained on the injection moulding process, where small variations of parameters related to rheological behaviour, such as pressure or clamping force, can be critical to the viability and cost of the parts manufactured by injection moulding.     

A Baumol–Oates approach to solid waste taxation

A national Baumol–Oates tax on waste in Denmark helped achieve a reduction of 26% in net solid waste from 1987 to 1998. The tax, which is levied per ton of waste, was particularly effective as regards the heavier waste streams such as construction waste and garden waste. When it comes to industrial and commercial waste, there are indications that the waste tax is not sufficiently significant to induce changes in behavior, and that except for very waste-intensive enterprises, companies do not seem to be very price sensitive. For household waste, the impact of the tax can be improved where tariffs for garbage collection are weight based, rather than per unit. However, the waste sector is an area in which the price signals are modified and filtered by institutionalized practices in municipal administration, and in which true-cost pricing is not easy to achieve. Hence, the rational choice assumption of environmental economics needs to be supplemented by an institutional dimension to interpret responses to environmental taxes correctly. Received: July 13, 2001 / Accepted: October 2, 2001