Dye-sensitized photodegradation of the fungicide carbendazim and related benzimidazoles

The present work studies the visible-light-promoted photodegradation of the colorless fungicide carbendazim (methyl 2-benzimidazolecarbamate) and several 2-substituted benzimidazoles (SBZ's), in water or water-methanol solution, in the presence of air and, as a photosensitizer, the synthetic xanthene dye Rose Bengal (RB) or the natural pigment riboflavin (Rf). The results indicate that the degradation of each particular SBZ depends on its chemical structure and on the sensitizer employed. In the presence of RB, the degradation always operates via a singlet molecular oxygen (O(2)((1)Delta(g)))-mediated mechanism, through a highly efficient process, as deduced from the comparison of the rate constants for physical and chemical quenching of O(2)((1)Delta(g)). In the presence of Rf, the visible-light irradiation of any of the studied SBZ's produces a series of competitive processes that depend on the relative concentrations of Rf and SBZ. These processes include the quenching of excited singlet and triplet Rf states by the SBZ and the generation of both O(2)((1)Delta(g)) and superoxide radical anion (O(2)(-)), the latter generated by electron transfer from excited Rf species to the dissolved oxygen. The overall result is the photodegradation of the SBZ and the photoprotection of the sensitizer.     

Photodegradation of the herbicide Norflurazon sensitised by Riboflavin. A kinetic and mechanistic study

The kinetics and mechanism of the Riboflavin (Rf)-promoted photochemical degradation with visible light of the herbicide Norflurazon (NF) has been studied by time-resolved and stationary techniques. Using light of wavelength higher than 400 nm--a region where NF is totally transparent--and with concentrations of Rf and NF of ca. 0.02 and 1 mM, respectively, only the excited triplet state of Rf ((3)Rf*) is quenched by NF, in competition with dissolved ground state triplet oxygen, O(2)((3)Sigma(g)(-)). NF degradation mainly occurs by reaction with superoxide radical anion O(2)(-) formed through two electron transfer steps: from NF to (3)Rf*, yielding Rf radical anion, and from this anion to O(2)((3)Sigma(g)(-)), regenerating ground state Rf. Although singlet molecular oxygen is also produced, NF only quenches this oxidative species in a physical mode. The global result is the photoprotection of the sensitiser and the photodegradation of NF.     

Photosensitized degradation of bisphenol A involving reactive oxygen species in the presence of humic substances

The photodegradation of endocrine disrupter bisphenol A (BPA) in the presence of natural humic substances (HS) under simulated solar irradiation was studied. BPA underwent slow direct photolysis in neutral pure water, but rapid photosensitized degradation in four kinds of HS, following pseudo-first-order reaction. Reactive oxygen species (ROS) formed from HS were determined, including OH, (1)O(2) and H(2)O(2). The enhancement of BPA degradation by adding Fe(III) was primarily attributed to the oxidation of OH produced from photo-Fenton-like reaction. And the joint effects of HS and nitrate ions coexisting on BPA degradation appeared to depend on respective concentration levels. The effects of dissolved oxygen suggested that the energy transfer between excited state of SRFA and NOFA likely occurred, while the abstraction of phenolic hydrogen atom to reactive triplet state of NOHA possibly took place. Based on the structural analyses of main intermediates and degradation products of BPA detected by GC-MS, the possible photodegradation pathways were proposed, involving the alky cleavage, alkyl oxidation and OH addition. This study gave a better understanding for the photochemical transformation of BPA induced by ROS generated from natural water composition under sunlight irradiation.     

Modelling the environmental degradation of water contaminants. Kinetics and mechanism of the riboflavin-sensitised-photooxidation of phenolic compounds

The aerobic visible-light-photosensitised irradiation of methanolic solutions of either of the phenolic-type contaminants model compounds (ArOH) p-phenylphenol (PP), p-nitrophenol (NP) and phenol (Ph), and for two additional phenolic derivatives, namely p-chlorophenol (ClP) and p-methoxyphenol (MeOP), used in some experiments, was carried out. Employing the natural pigment riboflavin (Rf) as a sensitiser, the degradation of both the ArOH and the very sensitiser was observed. A complex mechanism, common for all the ArOH studied, operates. It involves superoxide radical anion (O₂^√−) and singlet molecular oxygen (O₂(¹Δ_g)) reactions. Maintaining Rf in sensitising concentrations levels (≈0.02 mM), the mechanism is highly dependent on the concentration of the ArOH. Kinetic experiments of oxygen and substrate consumption, static fluorescence, laser flash photolysis and time-resolved phosophorescence detection of O₂(¹Δ_g) demonstrate that at ArOH concentrations in the order of 10 mM, no chemical transformation occurs due to the complete quenching of Rf singlet excited state. When ArOH is present in concentrations in the order of mM or lower, O₂^√− is generated from the corresponding Rf radical anion, which is produced by electron transfer reaction from the ArOH to triplet excited Rf. The determined reaction rate constants for this step show a fairly good correlation with the electron-donor capabilities for Ph, PP, NP, ClP and MeOP. In this context, the main oxidative species is O₂^√−, since O₂(¹Δ_g) is quenched in an exclusive physical fashion by the ArOH. The production of O₂^√− regenerates Rf impeding the total degradation of the sensitiser. This kinetic scheme could partially model the fate of ArOH in aquatic media containing natural photosensitisers, under environmental conditions.     

Photodegradation of hydroxylated N-heteroaromatic derivatives in natural-like aquatic environments. A review of kinetic data of pesticide model compounds

In the present review, the results published by our group and others related with the study of the kinetic behavior and, in some cases, the mechanism of the dye-promoted photooxygenation of several hydroxypyridines, hydroxyquinolines and hydroxypyrimidines--some of them with the basic molecular structures of known pesticides, and of a few non-hydroxylated model compounds, are compiled and discussed. The main aim was to examine the experimental conditions that maximize the photodegradation efficiencies of all these compounds, under dye-sensitized photooxidation conditions similar to those frequently found in nature, with a natural dye sensitizer such as riboflavin (vitamin B2), a pigment habitually present in natural waters. The usual mechanism of action of this compound is rather complex, in many cases with the concurrent involvement of the oxidative species singlet molecular oxygen (O2(1Deltag)) and superoxide radical anion. In order to simplify the study of the processes, the results found using the synthetic dye Rose Bengal (RB), a sensitizer that generates O2(1Deltag) with high efficiency, are also discussed. RB and similar O2(1Deltag)-generators could be used for the efficient non-natural photodegradation of related pesticides in aqueous solutions under controlled conditions.     

Chlorination of bisphenol A in aqueous media: formation of chlorinated bisphenol A congeners and degradation to chlorinated phenolic compounds

The chlorination of bisphenol A (BPA) in aqueous media was investigated in order to describe the degradation profile of this compound and the formation of chlorinated products. Aqueous solutions of BPA (approx. 1 mg/l) were chlorinated by sodium hypochlorite solution at room temperature and under weakly alkaline conditions. Chlorinated compounds were extracted with dichloromethane and determined by gas chromatography/mass spectrometry (GC/MS). BPA was consumed completely within 5 min of chlorination, when the initial chlorine concentration was 10.24 mg/l (molar ratio to BPA, 58.7). On the other hand, when the initial chlorine concentration was 1.03 mg/l (molar ratio, 6.56), 9.3% of BPA still remained after 60 min chlorination. Five chlorinated BPA congeners, 2-chlorobisphenol A (MCBPA), 2,6-dichlorobisphenol A (2,6-D2CBPA), 2,2'-dichlorobisphenol A (2,2'-D2CBPA), 2,2',6-trichlorobisphenol A (T3CBPA) and 2,2', 6,6'-tetrachlorobisphenol A (T4CBPA) were formed in the earlier stages of chlorination. Several chlorinated phenolic compounds, 2,4,6-trichlorophenol (T3CP), 2,6-dichloro-1,4-benzoquinone (D2CBQ), 2,6-dichloro-1,4-hydroquinone (D2CHQ), C9H10Cl2O2, C9H8Cl2O and C10H12Cl2O2, were also formed by further chlorination.     

Reactivity of cycloxydim toward singlet oxygen in solution and on wax film

The reactivity of the herbicide cycloxydim (CD) toward singlet oxygen was studied in organic solution and on wax films to mimic the leaf surface. Experiments in solution were conducted in acetonitrile using phenalenone as a sensitizer. For the experiments in the solid state, phenalenone was included in paraffinic wax films and CD deposited at the film surface. By laser flash photolysis we observed that the triplet of phenalenone reacts with CD with a bimolecular rate constant of (9.6 ± 1)×10⁶ M⁻¹ s⁻¹. However, scavenging experiments using β-carotene as a singlet oxygen quencher showed that the observed CD degradation in aerated acetonitrile involves singlet oxygen essentially. The bimolecular rate constant of reaction of CD with singlet oxygen was evaluated to (1.0 ± 0.2)×10⁷ M⁻¹ s⁻¹. Phenalenone included in the wax films also significantly increased the rate of CD photodegradation, the involvement of singlet oxygen being very likely. The photoproducts formed via the singlet oxygen pathway resulted from the oxidation of the thiol group and/or the cyclohexene ring. This study should help to better understand the fate of CD after its spraying on crops.     

Photodegradation of bisphenol A in simulated lake water containing algae, humic acid and ferric ions

The photodegradation of bisphenol A (BPA), a suspected endocrine disruptor (ED), in simulated lake water containing algae, humic acid and Fe3+ ions was investigated. Algae, humic acid and Fe3+ ions enhanced the photodegradation of BPA. Photodegradation efficiency of BPA was 36% after 4h irradiation in the presence of 6.5 x 10(9) cells L(-1) raw Chlorella vulgaris, 4 mg L(-1) humic acid and 20 micromol L(-1) Fe3+. The photodegradation efficiency of BPA was higher in the presence of algae treated with ultrasonic than that without ultrasonic. The photodegradation efficiency of BPA in the water only containing algae treated with ultrasonic was 37% after 4h irradiation. The algae treated with heating can also enhance the photodegradation of BPA. This work helps environmental scientists to understand the photochemical behavior of BPA in lake water.     

Sensitized photooxygenation of the fungicide furalaxyl

BACKGROUND: The photolysis of pesticides is of high current interest since light is one of the most important abiotic factors which are responsible for the environmental fate of these substances and may induce their conversion into noxious products. The action of light can also be mediated by oxygen and synthetic or naturally occurring substances which act as sensitizers. Our objective in this study was to investigate the photochemical behaviour of the systemic fungicide furalaxyl in the presence of oxygen and various sensitizers, and to compare the toxicity of the main photoproduct(s) to that of the parent compound. Previous reports on the direct photolysis of the pesticide demonstrated a very slow degradation and the only identified photoproducts were N-2,6-xylyl-D,L-alaninare and 2,6-dimethylaniline. METHODS: Solutions of furalaxyl in CH3CN were photooxygenate using a 500W high-pressure mercury lamp (through a Pyrex glass filter, lambda>300 nm) or a 650W halogen lamp or sunlight and the proper sensitizer. When sunlight was used, aqueous solutions were employed. The photodegradation was checked by NMR and/or GC-MS. The photoproducts were spectroscopically evidenced and, when possible, isolated chromatographically. Acute toxicity tests were performed on the rotifer Brachionus calyciflorus, the crustacean cladoceran Daphnia magna and the anostracan Thamnocephalus platyurus, while chronic toxicity tests (sublethal endpoints) comprised a producer, the alga Pseudokirchneriella subcapitata and the crustacean Ceriodaphnia dubia, as a consumer. RESULTS AND DISCUSSION: In the presence of both oxygen and sensitizer, furalaxyl underwent rapid photochemical transformations mainly to N-disubstituted formamide, maleic anhydride and a 2(5H)-furanone derivative. The formation of these products was rationalized in terms of a furan endoperoxide intermediate derived from the reaction of furalaxyl with active dioxygenated species (singlet oxygen, superoxide anion or ground state oxygen). The 2(5H)-furanone exhibited a higher toxicity than the parent compound. CONCLUSION: This work reports the first data on the photosensitized oxygenation of furalaxyl with evidence of the high tendency of the pesticide to undergo photodegradation under these conditions leading, among other things, to a 2(5H)-furanone, which is more toxic than the starting furalaxyl towards aquatic organisms. RECOMMENDATIONS AND OUTLOOK: Investigation highlights that the photolytic fate of a pesticide, although quite stable to direct photoreaction due to its low absorption of solar radiation at ground level, can be significantly influenced in the environment by the presence of substances with energy or electron-transfer properties as natural dyes, e.g. chlorophyll, or synthetic pollutants, e.g. polycyclic aromatic hydrocarbons (PAH).     

Leaching of bisphenol A (BPA) to seawater from polycarbonate plastic and its degradation by reactive oxygen species

In this study, (1) change in the concentration of bisphenol A (BPA) leached from polycarbonate (PC) tube to control water (BPA free), seawater and river water at 20 and 37 degrees C as a function of time, (2) the fate of BPA caused by addition of H(2)O(2) and Fe(3+) to seawater containing BPA leached from PC tube were assessed. BPA leached from PC tube to all water samples increased with the ascendant of temperature and with the passage of time. The BPA leaching velocity in seawater was the fastest in three samples (11 ng/day for seawater, 4.8 ng/day for river water 0.8 ng/day for control water at 37 degrees C).BPA leaching velocity from PC tube was significantly high at pH 8 (50 mM Na(2)HPO(4)) and increased dose-dependently. There was no difference in the velocity of BPA among the 50 mM phosphate-buffers at pH 6.5, 7.0 and 7.5. BPA was leached three times higher by addition of Na(+) than K(+). However, the higher the K(+) concentration, the larger the BPA leached from PC tube. Na(+) mixed with PO(4)(-) was effective on BPA leaching from PC tube, but not with SO(4)(-) or Cl(-). The results suggested that BPA leaching from PC tube would be attributed to the concentration of bibasic phosphate such as Na(2)HPO(4) and K(2)HPO(4) in water samples. BPA was degraded in both control water and seawater in the presence of radical oxygen species, but the degradation rate was lower in seawater than in control water, suggesting that anti-oxidative system exists in seawater. Neo-synthesized substance in both control water and seawater in the presence of reactive oxygen species was identified as BPA-quinone by LC-MS.     

TiO_2膜光催化降解4,4’-二溴联苯的研究

研究了负载于玻璃上的同定化催化剂TiO2膜光催化降解水中4,4'-二溴联苯(4,4'-DBB)的效果,考察了溶液pH值和4,4'-DBB初始浓度等对TiO2膜光催化降解4,4'-DBB的影响,探讨了降解机理.结果表明.TiO2膜光催化降解水中4,4'-DBB的效果良好,紫外光照射8 b,初始浓度为4 mg/L的4,4'-DBB的降解率高达94%,降解速率随着4,4'-DBB初始浓度的增大而下降.在溶液pH=1时,4,4'-DBB的降解效率最高.超声的加入使降解反应的速率加快.经拟合发现4,4'-DBB的降解符合拟一级反应规律,并推导出动力学方程.     

Light-induced transformations of aza-aromatic pollutants adsorbed on models of atmospheric particulate matter: Acridine and 9(10-H) acridone

The effect of the characteristics of the surface on the phototransformation of acridine, one of the most abundant azapolycyclic compounds encountered in urban atmospheres, and of one of its principal photoproducts, acridone, was studied when adsorbed onto models of the atmospherice particulate matter. For this purpose, relative photodegradation rates were determined from absorption or emission intensities as a function of irradiation times, and some products were isolated and characterized. The relative photodegradation rates of adsorbed acridine show the tendency (NH(4))(2) SO(4) > MgO > Al(2)O(3) >SiO(2). In general, the rates decrease as the fraction of protonated acridine species on the surface increases in MgO, Al(2)O(3), and SiO(2), except for (NH(4))(2) SO(4) where a fast surface reaction occurs. Oxygen reduces the photodestruction rates by as much as 40 to 60% when compared to an inert atmosphere, implying the participation of an acrideine triplet state in the transformation processes on all surfaces except on (NH(4))(2)SO(4). Acridone, a major product, undergoes a photoinduced tautomerization to 9-hydroxy acridine. The formation of a dihydrodiol, another photoproduct of acridine, is suggested by comparison to reported spectral properties of these compounds. This is formed through a singlet oxygen reaction. Photoproducts showing the absence of the narrow absorption band of 250 nm, characteristic of the pi -->pi* transition in tricyclic aromatics, were detected in small yields but not identified. These results suggest possible photochemical transformation pathways that could lead to the ultimate fate of these pollutants in the environment.     

Solar CPC pilot plant photocatalytic degradation of bisphenol A in waters and wastewaters using suspended and supported-TiO2. Influence of photogenerated species

Photocatalytic degradation of bisphenol A (BPA) in waters and wastewaters in the presence of titanium dioxide (TiO₂) was performed under different conditions. Suspensions of the TiO₂ were used to compare the degradation efficiency of BPA (20 mg L^?1) in batch and compound parabolic collector (CPC) reactors. A TiO₂ catalyst supported on glass spheres was prepared (sol–gel method) and used in a CPC solar pilot plant for the photodegradation of BPA (100 μg L^?1). The influence of OH·, O₂ ^·?, and h ⁺ on the BPA degradation were evaluated. The radicals OH· and O₂ ^·? were proved to be the main species involved on BPA photodegradation. Total organic carbon (TOC) and carboxylic acids were determined to evaluate the BPA mineralization during the photodegradation process. Some toxicological effects of BPA and its photoproducts on Eisenia andrei earthworms were evaluated. The results show that the optimal concentration of suspended TiO₂ to degrade BPA in batch or CPC reactors was 0.1 g L^?1. According to biological tests, the BPA LC₅₀ in 24 h for E. andrei was of 1.7?×?10^?2 mg cm^?2. The photocatalytic degradation of BPA mediated by TiO₂ supported on glass spheres suffered strong influence of the water matrix. On real municipal wastewater treatment plant (MWWTP) secondary effluent, 30 % of BPA remains in solution; nevertheless, the method has the enormous advantage since it eliminates the need of catalyst removal step, reducing the cost of treatment.     

Removal of phenylurea herbicide monuron via riboflavin-mediated photosensitization

Photodegradation of the phenylurea herbicide monuron by using riboflavin (Rf), a sensitizer, was investigated by varying the doses of monuron and Rf in this work. An enhanced photochemical effect was observed in the process compared with the direct photolysis by using UV irradiation only. The reaction time was greatly shortened from more than 60 min (direct photolysis) to 8-30 min depending on the doses of initial concentration of monuron ([M]0) and Rf. A modified hyperbola model was found to be useful to determine the reaction kinetics and thereafter the performance on the photodegradation of monuron sensitized by Rf. Two measurable characteristic constants (initial decay rate and total removal index) were used to quantify the reaction. The maximum removal difference compared with the direct photolysis and Rf-sensitization was investigated. It was found that the improvement of the process depended on both the [M]0 and the doses of Rf.     

Biological assessment of bisphenol A degradation in water following direct photolysis and UV advanced oxidation

Endocrine disrupting compounds (EDCs) are exogenous environmental chemicals that can interfere with normal hormone function and present a potential threat to both environmental and human health. The fate, distribution and degradation of EDCs is a subject of considerable investigation. To date, several studies have demonstrated that conventional water treatment processes are ineffective for removal of most EDCs and in some instances produce multiple unknown transformation products. In this study we have investigated the use of direct photolysis with low-pressure (LP) Hg UV lamps and UV+hydrogen peroxide (H(2)O(2)) advanced oxidation process (AOP) for the degradation of a prototypic endocrine disrupter, bisphenol A (BPA), in laboratory water. Removal rates of BPA and formation of degradation products were determined by high performance liquid chromatography (HPLC) analysis. Changes in estrogenic activity were evaluated using both in vitro yeast estrogen screen (YES) and in vivo vitellogenin (VTG) assays with Japanese medaka fish (Oryzias latipes). Our results demonstrate that UV alone did not effectively degrade BPA. However, UV in combination with H(2)O(2) significantly removed BPA parent compound and aqueous estrogenic activity in vitro and in vivo. Removal rates of in vivo estrogenic activity were significantly lower than those observed in vitro, demonstrating differential sensitivities of these bioassays and that certain UV/AOP metabolites may retain estrogenic activity. Furthermore, the UV/H(2)O(2) AOP was effective for reducing larval lethality in treated BPA solutions, suggesting BPA degradation occurred and that the degradation process did not result in the production of acutely toxic intermediates.     

UV-TiO_2光催化氧化降解双酚A的动力学研究

采用自制光催化氧化反应器,研究了双酚A(BPA)在纳米TiO_2悬浆体系中的光催化氧化特性.结果表明:(1)UV-TiO_2对水中BPA有较强光催化氧化降解作用.在10 W低压汞灯照射下,当纳米TiO_2用量为1.0 g/L、pH为5.5、BPA初始质量浓度为10 mg/L、曝气量为4.0 mL/min、温度为室温、反应时间为120 min时,BPA去除率可达97.1%.当pH≥9.5时,120 min后BPA已经基本光催化氧化降解完全.(2)BPA的光催化氧化降解曲线均很好地符合一级反应动力学方程.其速率常数与纳米TiO_2用量、pH、BPA初始浓度、曝气量有关;促进·OH和电子-空穴对的生成是提高光催化氧化反应速率的重要途径.     

Inhibition of BPA degradation by serum as a hydroxyl radical scavenger and an Fe trapping agent in Fenton process

Identification of reactive oxygen species (ROS) that contribute to bisphenol-A (BPA) degradation and monitoring of BPA at various concentrations in human serum under Fenton reaction conditions were carried out using electron spin resonance (ESR) spectrophotometry and high performance liquid chromatography with electrochemical detection (HPLC-ECD). BPA recovery decreased with increasing Fe concentration and time, both with a Fenton reaction using Fe(II), and with a Fenton-like reaction using Fe(III). In these reactions, BPA dose-dependently decreased the intensity of 5,5-dimethyl-1-pyrroline-N-oxide (DMPO)-*OH, up to 1 microg/ml BPA, and no change in DMPO-O(2)(?-) intensity was observed. The decrease in BPA recovery was inhibited strongly by addition of serum under Fenton-like reaction conditions, and there was a negative correlation between turbidity and BPA recovery. To clarify the mechanism by which serum inhibits BPA degradation, the relationship between BPA recovery and sample turbidity, and characteristics of the precipitates were investigated using spectrophotometry and X-ray analysis. The precipitate formed in the serum-containing sample consisted of C, S, O, P and Fe. BPA degradation was also inhibited under Fenton-like reaction conditions in phosphate buffered saline (PBS), and a precipitate consisting of O, P, and Fe appeared. Precipitates also appeared in authentic albumin and gamma-globulin when sulfate was added with Fenton reagents. After precipitate removal, both Fe and protein concentrations in the supernatant of the protein solutions with sulfate decreased with increasing Fe addition. We demonstrate here that hydroxyl radical generation from Fenton or Fenton-like reactions can degrade BPA, and that serum strongly inhibits BPA degradation, not only by competing with BPA for hydroxyl radicals, but also by trapping Fe with oxidative components present in the serum.     

Fate of 14C-bisphenol A in soils

Bisphenol A (BPA; 2,2-(4,4(')-dihydroxydiphenyl)propane) is predominantly used as an intermediate in the production of polycarbonate plastics and epoxy resins. Traces of BPA released into the environment can reach the soil via application of sewage sludge from wastewater treatment systems that receive wastewaters containing BPA, or from leachate from uncontrolled landfills. The biodegradability of BPA has been previously investigated in several studies designed to simulate surface waters and biological wastewater treatment systems. However, there is little information available about the fate of BPA in soil. Therefore, laboratory soil degradation and batch adsorption studies were conducted with 14C-BPA and four soils according to international guidelines. The soils represented a broad range of physico-chemical properties. An important result of the degradation study was that, independent of the soil type, 14C-BPA was rapidly dissipated and not detectable in soil extracts following 3 days of incubation. Based on this result, a dissipation half-life of less than 3 days was estimated. The major route of dissipation of 14C-BPA in soil was the formation of bound residues that could not be recovered by exhaustive Soxhlet extraction. 14C-BPA was also shown to be transiently converted to up to five metabolites, but within 3 days, neither 14C-BPA nor 14C-metabolites were detectable in the soils. After 120 days incubation, significant amounts (up to 20% of the radioactivity applied) of the parent compound were recovered as 14CO(2). Soil adsorption experiments indicated that the distribution coefficients (K(oc)) were between 636 and 931, classifying BPA as having low mobility for all tested soils. From the results of this study, it was concluded that if BPA reaches the soil compartment, it is not expected to be stable, mobile, or bioavailable.     

Degradation of bisphenol A using UV and UV/H2O2 processes

Bisphenol A (BPA; 4-[2-(4-hydroxyphenyl)propan-2-yl]phenol) is a substance typically used in the plastic industry. It is used in the production of epoxy resins, polycarbonate, or fire retardants or as a stabilizer and an antioxidant in numerous types of plastics. Bisphenol A is introduced into the environment via municipal and industrial wastewater. Because of its hydrophobic properties, BPA has the potential for sorption on activated sludge during the biological wastewater treatment processes. This study investigated the degradation of BPA by means of UV-radiation and in the UV/H2O2 process with the presence and absence of hydrocarbonate ions (HCO3(-)) as hydroxyl radicals (OH*) scavengers. The calculated value of quantum yield was equal to 0.18, and the value of BPA rate constant with hydroxyl radicals was equal to 3.3 x 10(9) M(-1) s(-1).     

Photodegradation mechanism for bisphenol A at the TiO2/H2O interfaces

Bisphenol A (BPA) can be decomposed photocatalytically under UV-illumination in aqueous TiO2 dispersion. The two methyl groups in BPA were initially attacked with .OH and/or .OOH radicals having strong oxidizing power, followed by the cleavage of the two phenyl moieties. Finally, the photomineralization to CO2 gas occurred via oxidative processes involving carboxylic acids and aldehydes. The decomposition of structurally similar substances of 4,4'-ethylidenebisphenol (EBP) and 4,4'-methylenebisphenol (MBP) was compared. The decomposition of BPA gave more kinds of intermediates such as 4-isopropylphenol, 4-ethylphenol, etc. On the other hand, that of EBP gave mainly 4-isopropylphenol and that of MBP gave a predominant product of 4-hydroxybenzaldehyde. These photooxidative pathways were proposed on the base of the evidence of oxidative intermediate formation.