Basal soil monitoring scheme in the protected areas of the Czech Republic

The purpose and aims of environmental monitoring are discussed, particularly in the context of soils as part of the environment, and examples of such schemes currently in operation within Europe are outlined. These are compared with the Basal Soil Monitoring Scheme (BSMS) in the Czech Republic which is the product of collaboration between the Ministries of Agriculture and the Environment and five agricultural, forestry and environmental research institutes. The BSMS consists of over 250 monitoring plots covering three distinct land uses: agriculture, forestry and environmentally protected areas. Each land use class has its own subsystem of monitoring plots which together comprise the whole system. The main principles and methodologies employed in the environmentally protected areas of the Czech Republic are described in some detail.     

Environmental monitoring of genetically modified crops

Genetically modified (GM) crops are now approved for commercial use in several world areas. In terms of commercial acreage, the majority of these products possess either herbicide tolerance or insect protection traits. Prior to commercialization, each product underwent a country specific review of environmental safety data by independent regulatory authorities. Registration was granted after review of the data allowed authorities to conclude that the risks were minimal or manageable when balanced with the benefits. As a condition of registration, insect resistance management (IRM) has been imposed for insect protected products in most countries. Other world areas have reviewed similar data packages and have not yet been able to grant registration for commercial release. Post-registration environmental monitoring of GM crops is viewed in some world areas as a means of enabling approvals by addressing uncertainty that exists with this technology. Questions such as, who should monitor and who should pay for it, how should monitoring be conducted, what information is necessary to collect and how long should a given product be monitored are yet to be answered. Monitoring methods could be general (surveys and questionnaires) or specific (scientific studies to address specific questions). Independent research currently underway in countries where GM crops are commercial involves monitoring the benefits as well as the risks of these products. Experience with other products has shown that monitoring of GM crops will be of value only if the questions are clearly defined, the methods are appropriate and the end points (data collected) are interpretable.     

Environmental monitoring for protected areas: Review and prospect

Monitoring activities in protected areas have a long history. Internal planning and management needs early led to ecological inventories. More recently the increasing number and awareness of external threats to parks has led to a variety of monitoring programs. Efforts to use protected areas, and especially biosphere reserves, as ecological baselines, have reinforced this trend. And as protected areas are increasingly recognized to be islands with complex internal and regional interactions, holistic, systems approaches to inventory, monitoring, and assessment of their state are being developed. This paper begins by reviewing threats to parks and the origins and importance of inventory and monitoring activities. A review of resource survey methods follows. Ecosystem science and environmental monitoring are introduced as a foundation for consideration of several newer approaches to monitoring and assessing the state of natural environments. These newer approaches are stress/response frameworks, landscape ecology, ecosystem integrity, and state of the environment reporting. A final section presents some principles for monitoring the state of protected areas. Examples are drawn from experience with Canadian national parks.     

Environmental monitoring to enhance comprehension and control of infectious diseases

In a world of emerging and resurging infectious diseases, dominated by zoonoses, environmental monitoring plays a vital role in our understanding their dynamics and their spillover to humans. Here, we critically review the ecology, epidemiology and need for monitoring of a variety of directly transmitted (Sin Nombre virus, Avian Influenza) and vector-borne (Ross River virus, West Nile virus, Lyme disease, anaplasmosis and babesiosis) zoonoses. We focus on the valuable role that existing monitoring plays in the understanding of these zoonoses, the demands for new monitoring, and how improvements can be made to existing monitoring. We also identify the fruitful outcomes which would result from implementation of the monitoring demands we have highlighted. This review aims to promote improvements in our understanding of zoonoses, their management, and public health by encouraging discussion among researchers and public health officials.     

Environmental monitoring and assessment of the water bodies of a pre-construction urban wetland

It is planned that the Dayanghan Wetland in China will be transformed into a national park but little is known about its current water quality and pollution status. Thus, we monitored the physical and chemical characteristics of the Dayanghan Wetland, which showed that the water quality was generally good. However, the chemical oxygen demand was more than double the reference value, which may be attributable to previous tillage for vegetable crops and other farmlands. In addition, nickel and chromium caused low-level pollution in the water bodies of the Dayanghan Wetland. The mean trophic level index and nutrient quality index were 39.1 and 2.69, respectively. Both indices suggest that the water bodies of the Dayanghan Wetland are in a mesotrophic state and that no eutrophication has occurred. The study would provide a precise report on the status of environmental quality of the water bodies of a typical pre-construction wetland for the administration and decision of the local government and the planning agent.     

Environmental and biological monitoring of methyl ethyl ketone (MEK)

This study was conducted to evaluate the usefulness of various biological parameters for monitoring of workers exposed to methyl ethyl ketone (MEK). Fifty male workers from a large magnetic videotape factory participated in this study. Personal air samples were collected using 3M organic vapor monitors and analysed for MEK by gas chromatography with flame ionisation detector (FID). 10 mL of urine; blood (1 mL) and exhaled air were also collected at the end of an 8-hour workshift. The headspace GC method was applied for measurement of urinary and blood MEK. MEK in expired air was analysed directly by using a GC/FID.The correlation coefficients (r) between environmental MEK and all other biological parameters measured show significant positive relationships. The r for environmental MEK and urine MEK was 0.84; for blood 0.73 and for breath 0.64. The correlation coefficients between blood and urine was 0.72; blood and breath was 0.88 and urine and breath 0.60. These findings suggest that measurements of unmetabolised MEK in blood, exhaled air and urine can be used for biological monitoring of MEK exposure. Nevertheless, laboratory methodological assessment is in favour of measuring urinary MEK as it is non-invasive and does not have to be analysed immediately after collection.     

Weather variability permitted within amphibian monitoring protocol and affects on calling Hylidae

Anuran populations are sensitive to changing environmental conditions and act as useful indicators. Presently, much information collected concerning frog populations comes from volunteers following the North American Amphibian Monitoring Protocol. Does weather variability allowed within protocol affect the abundance of calling frogs? For 10 years, Credit Valley Conservation (Ontario, Canada) has been collecting anuran data concerning nine frog species employing three frog monitoring runs. Records include frog abundance by protocol code and five weather variables. Antecedent precipitation and temperature were determined from the nearest weather station. Locations with large source populations of two Hylidae species were selected (spring peeper calling in April and gray tree frog in May). Spearman correlations suggested there were no significant relationships between calling abundance of Hylidae species and ambient wind speed or humidity. However, gray tree frogs were temperature sensitive and calling was significantly related to increased water and air temperatures as well as day time high temperatures over the previous 2 weeks. Both species of calling Hylidae were affected by the volume and timing of precipitation (though, in different ways). Gray tree frogs seem to prefer drier conditions (when temperatures are significantly warmer) while spring peepers prefer to call during, or closely following, precipitation. Monitors targeting gray tree frog should track local weather conditions and focus on evenings when it is (a) warmer than the minimum temperatures and (b) drier than suggested by the protocol. It is recommended that an additional monitoring run could be added to reduce detection variability of this species.     

Environmental monitoring of historical change in arsenic deposition with tree bark pockets

ICP-MS analysis recorded historical change (c. 1846 to 2002) in the arsenic concentration of bark included within the trunks (tree bark pockets) of two Japanese oak trees (Quercus crispula), collected at an elevated location approximately 10 km from the Ashio copper mine and smelter, Japan. The arsenic concentration of the bark pockets was 0.016 +/- 0.003 microg cm(-2) c. 1846 (n = 5) and rose 50-fold from c. 1875 to c. 1925, from approximately 0.01 to 0.5 microg cm(-2). The rise coincided with increased copper production in Ashio from local sulfide ores, from 46 tons per year in 1877 to 16,500 tons per year in 1929. Following a decline in arsenic concentration and copper production, in particular during the Second World War, a second peak was observed c. 1970, corresponding to high levels of production from both local (6,000 tons per year) and imported (30,000 tons per year) ores, smelted from 1954. Compared to the local ores, the contribution of arsenic from imported ores appeared relatively low. Arsenic concentrations declined from c. 1970 to the present following the closure of the mine in 1974 and smelter in 1989, recording 0.058 +/- 0.040 microg cm(-2) arsenic (n = 5) in surface bark collected in 2002. The coincident trends in arsenic concentration and copper production indicated that the bark pockets provided an effective record of historical change in atmospheric arsenic deposition.     

Environmental monitoring of carbaryl applied in urban areas to control the glassy-winged sharpshooter in California

Carbaryl insecticide was applied by ground spray to plants in urban areas to control a serious insect pest the glassy-winged sharpshooter, Homalodisca coagulata (Say), newly introduced inCalifornia. To assure there are no adverse impacts to human health and the environment from the carbaryl applications, carbaryl was monitored in tank mixtures, air, surface water, foliage and backyard fruits and vegetables.Results from the five urban areas – Porterville, Fresno, Rancho Cordova, Brentwood and Chico – showed there were no significanthuman exposures or impacts on the environment. Spray tank concentrations ranged from 0.1–0.32%. Carbaryl concentrationsin air ranged from none detected to 1.12 g m^-3, well below the interim health screening level in air of 51.7 g m^-3. There were three detections of carbaryl in surface water nearapplication sites: 0.125 ppb (parts per billion) from a water treatment basin; 6.94 ppb from a gold fish pond; and 1737 ppbin a rain runoff sample collected from a drain adjacent to a sprayed site. The foliar dislodgeable residues ranged from 1.54–7.12 g cm^-2, comparable to levels reported forsafe reentry of 2.4 to 5.6 g cm^-2 for citrus. Carbarylconcentrations in fruits and vegetables ranged from no detectableamounts to 7.56 ppm, which were below the U.S.EPA tolerance, allowable residue of 10 ppm.     

Requirements for developing a regional monitoring capacity for aerosols in Europe within EMEP

The European Monitoring and Evaluation Programme (EMEP) has been established to provide information to Parties to the Convention on Long Range Transboundary Air Pollution on deposition and concentration of air pollutants, as well as on the quantity and significance of long-range transmission of pollutants and transboundary fluxes. To achieve its objectives with the required scientific credibility and technical underpinning, a close integration of the programme's main elements is performed. These elements are emission inventories, chemical transport modelling, and the monitoring of atmospheric chemistry and deposition fluxes, which further are integrated towards abatement policy development. A critical element is the air pollution monitoring that is performed across Europe with a focus not only on health effect aspects and compliance monitoring, but also on process studies and source receptor relationships. Without a strong observational basis a predictive modelling capacity cannot be developed and validated. Thus the modelling success strongly depends on the quality and quantity of available observations. Particulate matter (PM) is a relatively recent addition to the EMEP monitoring programme, and the network for PM mass observations is still evolving. This article presents the current status of EMEP aerosol observations, followed by a critical evaluation in view of EMEP's main objectives and its model development requirements. Specific recommendations are given for improving the PM monitoring programme within EMEP.     

Indices for assessment and monitoring of large mammals within an adaptive management framework

Many development projects intended to exploit natural resourcesare occurring in fragile ecosystems, and therefore the need forsound biodiversity assessment and monitoring programs is growing.Large mammals are important components of these fragile ecosystems, yet there are few strategies that attempt to assess and monitor entire large mammal communities in relation to development projects. We propose the use of two indices applied within a framework of adaptive management. An occurrence indexassesses the composition and distribution of large mammals at a site, and an abundance index monitors the abundance of large mammals over time in relation to development. We discuss the design, applicability and effectiveness of these indices based onour experience with a natural gas development project in the Amazon forests of southeastern Peru.     

Environmental Specimen Bank in Ehime University (es-BANK), Japan for global monitoring

During the last 40 years, The Center for Marine Environmental Studies (CMES), Ehime University collected a variety of environmental and biological material comprising about 1000 species and 100,000 samples from many developing and developed countries and also open seas and oceans all over the world. They were categorically archived, catalogued and stocked in our Environment Specimen Bank (es-BANK) facility equipped with a -25 degrees C cold room. We have already exchanged specimens with many scientific institutions and are also eager to widen our collaboration with other specimen banks. In our survey using the air, water, wildlife and human samples, we found that the major emission sources for the industrial chemicals like polychlorinated biphenyls (PCBs) are in the developed nations while those of organochlorine (OC) pesticides like dichlorodiphenyltrichloroethane and its metabolites (DDTs), hexachlorocyclohexane isomers (HCHs), etc. are located in developing countries. However, significant emission of modern environmental contaminants such as polybrominated diphenyl ethers (PBDEs) also seems to occur predominantly in countries with high economic growth rates. Apart from the modern incinerators and other industrial installations in developed nations, the compounds, like dioxins and related compounds (DRCs), were also found to be released in significant levels from the municipal solid waste dumping sites of developing countries. By evaluating the distribution patterns of various persistent toxic substances (PTSs) in our studies, we could conclude that DRCs and DDTs are regional contaminants, while PCBs, PBDEs, HCHs and hexachlorobenzene (HCB) are global contaminants. We also found that the pollution by PBDEs has been increasing in the last two decades while that of the legacy OCs has been decreasing.     

Environmental change monitoring in the arid and semi-arid regions: a case study Al-Basrah Province, Iraq

In recent years, land use/cover dynamic change has become a key subject urgently to be dealt with in the study of global environmental change. This research utilizes the integrated remote sensing and geographic information systems (GIS) in the southern part of Iraq (Basrah Province was taken as a case) to monitor, map, and quantify the environmental change using a 1:250,000 mapping scale. Remote sensing and GIS software were used to classify Landsat TM in 1990 and Landsat ETM+ in 2003 imagery into five land use and land cover (LULC) classes: vegetation land, sand land, urban area, unused land, and water bodies. Supervised classification and normalized difference buildup index, normalized difference vegetation index, normalized difference bare land index, the normalized differential water index, crust index (CI) algorithms, and change detection techniques were adopted in this research and used, respectively, to retrieve its class boundary. An accuracy assessment was performed on the 2003 LULC map to determine the reliability of the map. Finally, GIS software was used to quantify and illustrate the various LULC conversions that took place over the 13-year span of time. The results showed that the urban area, sand lands, and bare lands had increased by the rate of 1.2%, 0.8%, and 0.4% per year, with area expansion from 3,299.1, 4,119.1 km², and 3,201.9 km² in 1990 to 3,794.9, 4,557.7, and 3,351.7 km² in 2003, respectively. While the vegetation cover and water body classes were about 43.5% in 1990, the percentage decreased to about 39.6% in 2003. This study demonstrates the effectiveness of the remote sensing and GIS technologies in detecting, assessing, mapping, and monitoring the environmental changes.     

Applicability of hydromorphological monitoring data to locate flood risk reduction measures: Blanice River basin, Czech Republic

This paper presents a new methodological approach, using hydromorphological monitoring data from river networks, to identify stream elements that may negatively influence the course of floods, as well as elements suitable for modifications that will reinforce the natural retention potential of the floodplain. The approach uses data derived from hydromorphological monitoring that conforms to the EN 14614 standard "Water quality--Guidance standard for assessing the hydromorphological features of rivers." Four major aspects of stream modifications that can potentially affect the course and consequences of floods, and that can be derived from hydromorphological monitoring, were identified. These are: (1) modifications that increase the speed of runoff, (2) modifications that restrict the retention potential of the floodplain, (3) potential obstacles to the flood course, and (4) improper alterations of stream route modifications. A GIS is used to identify and locate these critical aspects of stream and floodplain modification. This method was applied in the Blanice River basin, an area in central Europe hit by a severe flood in August 2002. The critical modifications identified were compared with geomorphological mapping to display the different effects of individual types of modifications.     

Investigative monitoring within the European Water Framework Directive: a coastal blast furnace slag disposal, as an example

The European Water Framework Directive (WFD) establishes a framework for the protection of estuarine and coastal waters, with the most important objective being to achieve 'good ecological status' for all waters, by 2015. Hence, Member States are establishing programmes for the monitoring of water quality status, through the assessment of ecological and chemical elements. These monitoring programmes can be of three types: surveillance monitoring; operational monitoring (both undertaken on a routine basis); and investigative monitoring (carried out where the reason of any exceedance for ecological and chemical status is unknown). Until now, nothing has been developed in relation to investigative monitoring and no clear guidance exists for this type of monitoring, as it must be tackled on a 'case-by-case' basis. Consequently, the present study uses slag disposal from a blast furnace, into a coastal area, as a case-study in the implementation of investigative monitoring, according to the WFD.In order to investigate the potential threat of such slags, this contribution includes: a geophysical study, to determine the extent of the disposal area; sediment analysis; a chemical metal analysis; and an ecotoxicological study (including a Microtox test and an amphipod bioassay). The results show that metal concentrations are several times above the background concentration. However, only one of the stations showed toxicity after acute toxicological tests, with the benthic communities being in a good status. The approaches used here show that contaminants are not bioavailable and that no management actions are required with the slags.     

Multi-component assessment of worker exposures in a copper refinery. Part 1. Environmental monitoring

The exposure characterisation described in this paper for 135 copper refinery workers (45 females, 90 males) focuses on the concentrations of copper, nickel and other trace elements in the inhalable aerosol fractions, as well as in the water-soluble and water-insoluble subfractions. Some information is also provided on the thoracic and respirable aerosol fractions. Further, results are presented for volatile hydrides of arsenic and selenium released in the copper purification steps of the electrorefining process. For the pyrometallurgical operations, a comparison of the geometric means for the inhalable aerosol fraction indicated that water-soluble copper levels were on average 19-fold higher compared to nickel (p < 0.001) and a significant association was evident between them (r = 0.87, p < 0.001); for the insoluble subfraction, the copper : nickel ratio was 12.5 (p < 0.001) and the inter-element correlation had r = 0.98 and p < 0.001. Although for the electrorefinery workers the relative inhalable concentrations of copper and nickel were not significantly different (p > 0.05), the corresponding inter-element associations were: slope of 7.7, r= 0.54, p < or =0.001 for the water-soluble subfraction and slope of 1.3, r = 0.71 and p < or =0.001 for the water-insoluble subfraction. On average, a good proportion of the inhalable copper and nickel were found in the thoracic (40%) and respirable (20%) aerosol fractions. Cobalt air concentrations were generally low with geometric means and 95% confidence intervals of 3.1 (2.4-4.2)microg m(-3) (pyrometallurgical workers) and 0.3 (0.4-0.5) microg m(-3)(electrorefinery workers). Similarly, the maximum concentrations of cadmium and lead were low, respectively 4 and 25 microg m(-3). Of the hydrides, tellurium and antimony could not be detected, but for the arsenic (arsine) and selenium hydrides measurable exposure occurred for almost all electrorefinery workers, although the levels were generally low at 0.2 microg m(-3).     

Environmental monitoring of offshore drilling for petroleum exploration (MAPEM Project): shallow waters

This paper deals with the characteristics and composition of municipal solid waste (MSW) generated in Sangamner city. The composition of solid waste was studied by segregating it into different component, i.e., kitchen waste, paper, earth and fine material, slaughter house waste, leaves, metals, etc. These components were categorised into organic waste and inorganic waste. It was observed that Sangamner city produces around 61% organic waste, and the rest is inorganic waste. The characteristics of organic solid waste, i.e., pH, electrical conductivity, moisture content, organic carbon, nitrogen, phosphorus and potassium were evaluated. The analysis of organic content of MSW indicates that it is good source of nutrients for the agriculture sector whereas inorganic material can be used for landfill.     

Environmental monitoring of the role of phosphate compounds in enhancing immobilization and reducing bioavailability of lead in contaminated soils

Lead is a highly toxic element and forms stable compounds with phosphate, which is commonly used to immobilize Pb in soils. However, few studies have monitored the long-term stability of immobilized Pb, which is a critical factor in determining the effectiveness of the in situ stabilization technique. Both soluble and insoluble phosphate compounds were tested for Pb immobilization, and its subsequent mobility and bioavailability in a contaminated soil from a shooting range. Adding tricalcium phosphate, hydroxyapatite, rock phosphate and potassium dihydrogen phosphate reduced the concentration of ammonium-nitrate-extractable Pb in the contaminated soil by 78.6%, 48.3%, 40.5% and 80.1%, respectively. Insoluble phosphate amendments significantly reduced leached Pb concentration from the column while soluble potassium dihydrogen phosphate compound increased P and Pb concentrations in the leachate. Rock phosphate reduced Pb accumulation in earthworms by 21.9% compared to earthworms in the control treatment. The long-term stability of immobilized Pb was evaluated after 2 years' incubation of the contaminated soil with rock phosphate or soluble phosphate compounds. Bioavailable Pb concentration as measured by simple bioavailability extraction test (SBET) showed the long-term stability of immobilized Pb by P amendments. Therefore, Pb immobilization using phosphate compounds is an effective remediation technique for Pb-contaminated soils.