Adsorption behavior of phosphate on Lanthanum(Ⅲ) doped mesoporous silicates material

A series of lanthanum doped meosoporous MCM-41 (La_xM41, x is Si/La molar ratio) was prepared by sol-gel method. The surface structure of the materials was investigated with X-ray diffraction and N_2 adsorption/desorption technique. The content of La in the materials was determined by ICP. It was found that the La content of La_(25)M41, La_(50)M41 and La_(100)M41 was 7.53%, 3.89% and 2.32%, respectively. The phosphate adsorption capacities increased with increasing amount of La incorporation. With 0.40 g La_(25)M41 99.7% phosphate could be removed. The effects of Si/La molar ratio, La_xM41 dose, pH, initial concentration of phosphate solution, co-ions on phosphate adsorption were also evaluated. The phosphate adsorption kinetics of La_xM41 could be well-described by the pseudo second-order model, and Langmuir isotherm fit equilibrium data much better than the Freundlich isotherm.     

Removal of trace arsenic（V） and phosphate from water by a highly selective ligand exchange adsorbent

The ligand exchange adsorbent could be used to remove the toxic arsenic(V) and phosphate efficiently from water even in the presence of foreign anions and possible to apply in chemical industry.     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

氢氧化镧-天然沸石复合材料对水中低浓度磷酸盐的吸附作用

采用液相沉淀法将氢氧化镧和天然沸石进行复合,制备得到镧-沸石复合材料,并通过批量吸附实验考察了该复合材料对水中磷酸盐的吸附作用,特别是考察了该复合材料去除水中低浓度磷酸盐的影响因素.结果表明,当制备复合材料时沉淀pH值为5~7或13时,复合材料对水中磷酸盐的吸附能力较差;当沉淀pH值控制为9~12,复合材料对水中磷酸盐的吸附能力较好,且当沉淀pH值由9增加到11时,复合材料的吸磷能力明显增加,继续增加pH值由11~12时,复合材料的吸磷能力基本不变.沉淀pH值为11时制备的镧-沸石复合材料对水中磷酸盐的吸附平衡数据可以较好地采用Langmuir模型加以描述,根据Langmuir模型预测的最大磷酸盐吸附量为44 mg·g~(-1)(磷酸盐溶液pH 7和反应温度30℃);该复合材料对水中低浓度磷酸盐的吸附动力学可以较好地采用准二级动力学模型加以描述.当磷酸盐溶液pH值由3增加到8时,沉淀pH值为11条件下制备得到的镧-沸石复合材料对低浓度磷酸盐的吸附能力增加,继续增加磷酸盐溶液pH值时,该复合材料对磷酸盐的吸附能力下降;与磷酸盐溶液共存的氯离子和硫酸根离子不会抑制该复合材料对低浓度磷酸盐的吸附,而碳酸氢根离子则会略微抑制该复合材料对磷酸盐的吸附;与磷酸盐溶液共存的腐殖酸会抑制该复合材料对水中低浓度磷酸盐的吸附.当磷酸盐溶液pH值为7时,沉淀pH值为11时镧-沸石复合材料吸附磷酸盐的机制主要为配位体交换作用.因此,沉淀pH值为11时制备得到的镧-沸石复合材料适合作为吸附剂去除水和废水中低浓度磷酸盐.     

Adsorption behavior of condensed phosphate on aluminum hydroxide

Sodium pyrophosphate （pyro-P, Na4P2OT）, sodium tripolyphosphate （tripoly-P, Na3P3O10）, and sodium hexametaphosphate （meta-P, （NaPO3）6） were selected as the model compounds of condensed phosphate to investigate the adsorption behavior of condensed phosphate on aluminum hydroxide. The adsorption was found to be endothermic and divisible into two stages： （1） fast adsorption within 1 h; and （2） slow adsorption between 1 and 24 h. The modified Freundlich model simulated the fast adsorption stage well; the slow adsorption stage was described well by the first-order kinetics. The activation energies of pyro-P, tripoly-P, and meta-P adsorption on aluminum hydroxide were determined to be 20.2, 22.8 and 10.9 kJ/mol P adsorbed, respectively, in the fast adsorption stage and to be 66.3, 53.5 and 72.5 kJ/mol P adsorbed, respectively, in the slow adsorption stage. The adsorption increased the negative charge of the aluminum hydroxide surface. Transmission electron microscopy and energy dispersive X-ray analysis analyses provided evidence that the adsorption was not uniform on the surface and that the small crystals contributed more to the fast adsorption than the normal sites did. The results from X-ray fluorescence spectrometry and X-ray photoelectron spectroscopy tests also revealed the uneven adsorption of condensed phosphate as a function of the penetration depth. More condensed phosphates were adsorbed on the outer surface of aluminum hydroxide than in its inner parts.     

改性麦草秸秆对水中磷酸根吸附效果的研究

为实现农作物秸秆资源化,解决水体富营养化问题,将麦草秸秆化学改性成一种可以有效吸附水体中磷酸根的阳离子型吸附剂.考察了吸附剂投加量、磷酸根溶液初始pH、温度等因素对吸附效果的影响,分析了改性麦草秸秆对磷酸根的吸附动力学过程和吸附机理.结果表明,在吸附剂投加量为4 g·L-1和磷酸根溶液初始pH为4.0～7.5条件下,改性麦草秸秆对磷酸根的吸附效果最好,去除率均高于90%;改性麦草秸秆对磷酸根的吸附符合Freundlich等温模式,饱和吸附容量为2.38 mmol·g-1;吸附过程符合一级反应动力学方程,为快速反应过程;反应活化能为12.6 kJ·mol-1,反应速率对温度的变化不敏感.     

Adsorption of benzene,cyclohexane and hexane on ordered mesoporous carbon

Ordered mesoporous carbon (OMC) with high specific surface area and large pore volume was synthesized and tested for use as an adsorbent for volatile organic compound (VOC) disposal. Benzene, cyclohexane and hexane were selected as typical adsorbates due to their different molecular sizes and extensive utilization in industrial processes. In spite of their structural differences, high adsorption amounts were achieved for all three adsorbates, as the pore size of OMC is large enough for the access of these VOCs. In addition, the unusual bimodal-like pore size distribution gives the adsorbates a higher diffusion rate compared with conventional adsorbents such as activated carbon and carbon molecular sieve. Kinetic analysis suggests that the adsorption barriers mainly originated from the difficulty of VOC vapor molecules entering the pore channels of adsorbents. Therefore, its superior adsorption ability toward VOCs, together with a high diffusion rate, makes the ordered mesoporous carbon a promising potential adsorbent for VOC disposal.     

Adsorption of benzene, cyclohexane and hexane on ordered mesoporous carbon

Ordered mesoporous carbon(OMC) with high specific surface area and large pore volume was synthesized and tested for use as an adsorbent for volatile organic compound(VOC)disposal. Benzene, cyclohexane and hexane were selected as typical adsorbates due to their different molecular sizes and extensive utilization in industrial processes. In spite of their structural differences, high adsorption amounts were achieved for all three adsorbates, as the pore size of OMC is large enough for the access of these VOCs. In addition, the unusual bimodal-like pore size distribution gives the adsorbates a higher diffusion rate compared with conventional adsorbents such as activated carbon and carbon molecular sieve. Kinetic analysis suggests that the adsorption barriers mainly originated from the difficulty of VOC vapor molecules entering the pore channels of adsorbents. Therefore, its superior adsorption ability toward VOCs, together with a high diffusion rate, makes the ordered mesoporous carbon a promising potential adsorbent for VOC disposal.     

锆改性沸石对水中磷酸盐和铵的吸附特性

采用锆对天然沸石进行改性,并研究了锆改性沸石对水中磷酸盐和铵的吸附特性.结果表明,锆改性沸石对水中磷酸盐和铵均具有很好的吸附能力.锆改性沸石对水中磷酸盐和铵的吸附动力学过程满足准二级动力学模型.Langmuir、Freundlich和Dubinin–Radushkevich(D–R)等温吸附模型可以很好地描述锆改性沸石对水中磷酸盐的等温吸附行为.Langmuir等温吸附模型可以很好地描述锆改性沸石对水中铵的等温吸附行为.由Langmuir等温吸附模型计算得到锆改性沸石对磷酸盐和铵的最大吸附容量分别达到26.2,7.82 mg/g.热力学参数表明锆改性沸石对水中磷酸盐的吸附是自发的吸热反应过程.锆改性沸石对水中磷酸盐的吸附能力随着pH值的增加而降低.当pH4~8时,锆改性沸石对水中铵的吸附能力较高;当pH低于4或高于8时,对铵的吸附能力下降.水中共存的Cl-、SO42-、HCO3-和NO3-等阴离子对锆改性沸石吸附磷酸盐的影响很小,而共存的SiO32-对磷酸盐的吸附则具有较强的负面影响.水中共存的Ca2+和Mg2+对锆改性沸石吸附铵的影响较小,而共存的K+和Na+对铵的吸附则具有较强的负面影响.锆改性沸石吸附水中磷酸盐的主要机制是阴离子配位体的交换,吸附水中铵的主要机制是与沸石中可交换阳离子的离子交换.     

磷酸铝类材料对铬(Ⅵ)吸附性能的研究

本文研究了磷酸铝类材料对水中重金属离子Cr(Ⅵ)的吸附特性。结果表明：磷酸铝类材料对Cr(Ⅵ)吸附的平衡时间为6h，最佳pH值为0．5—2．0，模板固相磷酸铝类材料的吸附性能比磷酸铝的吸附性能要好，且其吸附等温线符合Freundlich模型。实验结果说明，磷酸铝类材料对水中的重金属离子有一定的吸附能力，可应用于废水处理中去除重金属离子。     

粉煤灰陶粒对废水中磷酸盐的吸附试验研究

以粉煤灰为主要原料制成粉煤灰陶粒,研究其对废水中磷酸盐的去除情况.同时,考察了影响粉煤灰陶粒吸附磷酸盐的主要因素及平衡吸附量,并对其进行吸附等温模型拟合分析.结果表明,粉煤灰陶粒对磷酸盐的去除率随粉煤灰陶粒投加量的增大而增加,较高的磷酸盐初始浓度可以加快磷酸盐的吸附.在较宽pH(4～10)范围内,均能呈现较好的磷酸盐去...