我国电子废弃物的回收处理现状和管理对策

电子废弃物因其高速增长性、潜在污染性和资源性受到各国的广泛关注.我国由于对电子废弃物缺乏健全的回收体系和有效的监管,导致严重的环境污染和资源浪费.针对这一问题,论述了我国电子废弃物的来源、流向、处理处置和管理现状,借鉴国外生产者责任延伸制(EPR)的实践,从政府、生产者和消费者的责任分担角度.提出了适合我国国情的EPR体系.     

电子废弃物现状与回收处理探讨

伴随着电子工业和信息高科技产业的高速发展,电子废弃物问题不可避免地摆在了我们的面前.伴随着电子废弃物的越境转移和我国成为世界"电子产品制造基地",我国也成为世界上最大的"电子废弃物处理场".介绍了我国及世界上电子废弃物的现状与处理状况,分析了电子废弃物具有的潜在环境污染性与可作为再生资源回收利用的资源性的双重特性,探讨了我国电子废弃物回收处理的循环经济之路,及其相关的政策、方法和措施等.     

上海市电子废弃物产生量及管理对策初探

介绍了国外电子废弃物的管理现状,对上海市电子废弃物的产生量及物质流向进行分析预测,提出了电子废弃物的管理原则和对策.     

国外电子废弃物资源化概述

随着信息工业的飞速发展,以及人们对电子废弃物认识的深入和环保意识的加强,电子废弃物的回收利用已逐渐成为一项新兴产业。通过分析国外发达国家对电子废弃物的环境管理、工艺技术以及回收体系状况,总结了发达国家的成功经验,对我国建立和完善电子废弃物管理体系,发展研究电子废弃物资源化技术提出对策和建议。     

我国电子废弃物回收处理体系比较与建议

根据目前我国电子废弃物回收处理体系的现实情况,从回收网络、处理情况和优缺点等方面,分析比较了我国五种电子废弃物回收处理体系：个体户回收处理体系、民间回收处理体系、供销社回收处理体系、生产商回收处理体系和电子废弃物专业拆解公司回收处理体系,并提出建立“个体户＋公司＋拆解基地”合作关系电子废弃物回收处理体系的建议。     

废弃电器电子产品处理基金政策实施情况及下一步工作安排

2013年12月19—20日,中国再生资源回收利用协会电子废弃物回收处理分会在成都成功举办废弃电器电子产品回收处理行业大会。本刊刊登财政部综合司魏岩处长在会议上的发言稿,以飨读者。     

电子废弃物管理立法研究

我国是世界上最大的家用电器生产和消费国之一,如今面临着越来越严重的电子废弃物处理的压力.而我国电子废弃物管理方面还存在着思想障碍、体制障碍、机制障碍、政策障碍以及法制障碍等问题,急需立法给予解决.我国电子废弃物管理立法应当着重建立如下法律制度:电子废弃物的管理体制制度、生产者责任延伸制度、押金制度、产品成分标识制度、新鲜材料税或垃圾填埋税等税收制度、资源价格制度、电子废弃物中介组织和服务制度、电子废弃物的科技支撑和示范制度、绿色消费和绿色采购制度.     

电子废弃物回收利用体系建设初探

电子废弃物是目前世界上增长最快的固体废弃物之一,其不合理处置会造成人体健康危害和环境污染,作为一种潜在可回收利用的二次资源,正日益引起人们的高度关注。概述了当前世界上一些发达国家电子废弃物回收利用体系现状,分析了我国目前的相关情况,提出了建设电子废弃物综合回收利用体系对于构建循环经济和和谐社会的必要性与重要性。     

电子废弃物的机械物理回收过程

电子产品数量及更新速度的提高,导致电子废弃物产生量的增长.电子废弃物中既含有有害成分,又含有大量可回收利用的有价值成分.在分析电子废弃物性质的基础上,阐述了电子废弃物的回收方法与过程.机械物理过程是根据电子废弃物的性质提出的一种回收有价值材料的过程.机械物理回收过程如筛选、形状分选、磁力分选和涡流分选已经在回收工业中被广泛使用.     

Sustainable disposal of municipal solid waste: Post bioreactor landfill polishing

Sustainable disposal of municipal solid waste (MSW) requires assurance that contaminant release will be minimized or prevented within a reasonable time frame before the landfill is abandoned so that the risk of contamination release is not passed to future generations. This could be accomplished through waste acceptance criteria such as those established by the European Union (EU) that prohibit land disposal of untreated organic matter. In the EU, mechanical, biological and/or thermal pretreatment of MSW is therefore necessary prior to landfilling which is complicated and costly. In other parts of the world, treatment within highly engineered landfills is under development, known as bioreactor landfills. However, the completed bioreactor landfill still contains material, largely nonbiodegradable carbon and ammonia that may be released to the environment over the long-term. This paper provides a conceptual analysis of an approach to ensure landfill sustainability by the rapid removal of these remaining materials, leachate treatment and recirculation combined with aeration. The analysis in this paper includes a preliminary experimental evaluation using real mature leachate and waste samples, a modeling effort using a simplified mass balance approach and input parameters from real typical bioreactor cases, and a cost estimate for the suggested treatment method.     

废弃电器电子产品处理基金补贴中数量审核方法的探讨

简要介绍了废弃电器电子产品概况、相关法律法规以及基金补贴过程中审核产品数量的现实做法,指出了现有审核机制中存在的一些问题,并根据废弃电器电子产品资源化过程中对主要污染产物的重点监控,提出一种多级比对的处理数量审核方法。     

废弃电器电子产品回收处理行业管理政策探讨

围绕新近出台的《废弃电器电子产品回收处理管理条例》,借鉴欧盟等国家对废旧物资的管理理念和具体措施,探讨了我国废旧电器电子产品的界定及管理制度建设,提出建设社区试点网络管理体系、建立由市场主导的生产者责任延伸体系等建议。     

The development and achievements of EU waste policy

While waste amounts are still growing in the EU, there is a clear shift in the waste management options employed to deal with waste. Less waste is landfilled and more is recycled or incinerated with energy recovery. In all, 62% of municipal waste was landfilled in 1995, but that figure had fallen to 40% by 2008. Waste management has a strong influence on the environment by either provoking or preventing impacts; for example, greenhouse gas emissions vary significantly between treatment options. The overall CO2-equivalent impacts from municipal waste management have in the same period been more than halved. The drivers for this change in waste management have been EU and national policies and legislation that have set up clear targets for recycling and recovery of waste. This article gives an overview of the set targets, the achieved results, and the consequences for greenhouse gas emissions of municipal waste management.     

A material flow analysis on current electrical and electronic waste disposal from Hong Kong households

A material flow study on five types of household electrical and electronic equipment, namely television, washing machine, air conditioner, refrigerator and personal computer (TWARC) was conducted to assist the Government of Hong Kong to establish an e-waste take-back system. This study is the first systematic attempt on identifying key TWARC waste disposal outlets and trade practices of key parties involved in Hong Kong. Results from two questionnaire surveys, on local households and private e-waste traders, were used to establish the material flow of household TWARC waste. The study revealed that the majority of obsolete TWARC were sold by households to private e-waste collectors and that the current e-waste collection network is efficient and popular with local households. However, about 65,000 tonnes/yr or 80% of household generated TWARC waste are being exported overseas by private e-waste traders, with some believed to be imported into developing countries where crude recycling methods are practiced. Should Hong Kong establish a formal recycling network with tight regulatory control on imports and exports, the potential risks of current e-waste recycling practices on e-waste recycling workers, local residents and the environment can be greatly reduced.     

我国废旧家电及电子产品回收处理现状及对策

如何对废旧家电及电子产品进行高效收集并合理、安全处置,已成为世界各国普遍关注的问题。分析发达国家在该领域实施的措施,结合我国现状及存在的主要问题,提出建立规范的废旧家电及电子产品回收处理体系相关对策。     

关于对《调整废旧物资回收企业增值税政策的请示》的意见

中华全国供销合作总社： 我们收到国家财政部税政司《关于征求〈调整废旧物资回收企业增值税政策的请示（征求意见稿）〉意见的函》（以下简称《征求意见稿》）后,专门组织专题会议进行了讨论研究。大家一致认为,在当前大力发展循环经济的新形势下,如果《征求意见稿》提交的政策出台,再生资源回收行业将会受到严重打击,并有可能导致全国供销社系统再生资源回收网络由此瓦解。     

Using plastic bag waste to assess the reliability of self-reported waste disposal data

Direct waste analysis (DWA) and the material flows approach are the two standard methods to quantify aggregated waste streams and analyze waste composition. Yet, with the increasing application of producer responsibility measures, product-based waste data rather than aggregated waste data are becoming important. It is over this requirement that both approaches fail to some extent in delivering the type and quality of information that is needed. This study uses plastic bag waste as an illustration to show how self-reported questionnaire survey data may be used to assess disposal quantities of product-based waste types. The estimates from a large-scale questionnaire survey with over 4,100 completed cases were verified against DWA data of the same year in Hong Kong. It was found that self-reported data give systematically lower figures (on the order of 1.3-5 times) than those obtained from standard methods such as DWA for Hong Kong and the UK. However, it is demonstrated that self-reported data can be internally consistent. Also, the magnitude of underestimation may not be as considerable as it appears since the data from DWA are not themselves entirely accurate owing to the difficulties in obtaining a pure load of waste for field analysis and the variable moisture contents or contamination levels in waste material.