SIMULATING HYDROLOGIC AND WATER QUALITY IMPACTS IN AN URBANIZING WATERSHED1

ABSTRACT: The Hydrologic Simulation Program‐Fortran (HSPF) was calibrated and used to assess the future effects of various land development scenarios on water quality in the Polecat Creek watershed in Caroline County, Virginia. Model parameters related to hydrology and water quality were calibrated and validated using observed stream flow and water quality data collected at the watershed outlet and the outlets of two sub water sheds. Using the county's Comprehensive Plan, land use scenarios were developed by taking into account the trends and spatial distributions of future development. The simulation results for the various land use scenarios indicate that runoff volume and peak rate increased as urban areas increased. Urbanization also increased sediment loads mainly due to increases in channel erosion. Constituent loads of total Kjeldal nitrogen, orthophosphorus, and total phosphorous for Polecat Creek watershed slightly decreased under future development scenarios. These reductions are due to increases in urban areas that typically contribute smaller quantities of nitrogen and phosphorous, as compared to agricultural areas. However, nitrate loads increased for the future land use scenarios, as compared to the existing land use. The increases in nitrate loads may result from increases in residential land and associated fertilizer use and concurrent decreases in forested land. The procedures used in this paper could assist local, state, and regional policy makers in developing land management strategies that minimize environmental impacts while allowing for future development.     

Changes in Shallow Groundwater Quality Beneath Recently Urbanized Areas in the Memphis,Tennessee Area1

Barlow, Jeannie R.B., James A. Kingsbury, and Richard H. Coupe, 2012. Changes in Shallow Groundwater Quality Beneath Recently Urbanized Areas in the Memphis, Tennessee Area. Journal of the American Water Resources Association (JAWRA) 48(2): 336‐354. DOI: 10.1111/j.1752‐1688.2011.00616.x Abstract: Memphis, the largest city in the state of Tennessee, and its surrounding suburbs depend on a confined aquifer, the Memphis aquifer, for drinking water. Concern over the potential for downward movement of water from an overlying shallow aquifer to the underlying Memphis aquifer provided impetus for monitoring groundwater quality within the shallow aquifer. The occurrence of volatile organic compounds (VOCs), nitrate, and pesticides in samples from the shallow well network indicate a widespread affect on water quality from the overlying urban land use. Total pesticide concentration was generally higher in more recently recharged groundwater indicating that as the proportion of recent water increases, the occurrence of pesticides related to the current urban land use also increases. Groundwater samples with nitrate concentrations greater than 1.5 mg/l and detectable concentrations of the pesticides atrazine and simazine also had higher concentrations of chloroform, a VOC primarily associated with urban land use, than in other samples. The age of the water from these wells indicates that these concentrations are most likely not representative of past agricultural use, but of more recent urban use of these chemicals. Given that the median age of water represented by the shallow well network was 21 years, a lag time likely exists between changes in land use and the occurrence of constituents related to urbanization in shallow groundwater.     

STATEWIDE EMPIRICAL MODELING OF BACTERIAL CONTAMINATION OF SURFACE WATERS1

ABSTRACT: Bacterial contamination of surface waters is attributed to both urban and agricultural land use practices and is one of the most frequently cited reasons for failure to meet standards established under the Clean Water Act (CWA) (P.L. 92–500). Statewide modeling can be used to determine if bacterial contamination occurs predominantly in urban or agricultural settings. Such information is useful for directing future monitoring and allocating resources for protection and restoration activities. Logistic regression was used to model the likelihood of bacterial contamination using watershed factors for the state of Maryland. Watershed factors included land cover, soils, topography, hydrography, locations of septic systems, and animal feeding operations. Results indicated that bacterial contamination occurred predominantly in urban settings. Likelihood of bacterial contamination was highest for small watersheds with well drained and erodible soils and a high proportion of urban land adjacent to streams. The number of septic systems and animal feeding operations and the amount of agricultural land were not significant explanatory factors. The urban infrastructure tends to “connect” more of the watershed to the stream network through the creation of roads, storm sewers, and wastewater treatment plants. This may partly explain the relationship between urbanization and bacterial contamination found in this study.     

LARGE AREA HYDROLOGIC MODELING AND ASSESSMENT PART I: MODEL DEVELOPMENT1

ABSTRACT: A conceptual, continuous time model called SWAT (Soil and Water Assessment Tool) was developed to assist water resource managers in assessing the impact of management on water supplies and nonpoint source pollution in watersheds and large river basins. The model is currently being utilized in several large area projects by EPA, NOAA, NRCS and others to estimate the off-site impacts of climate and management on water use, non-point source loadings, and pesticide contamination. Model development, operation, limitations, and assumptions are discussed and components of the model are described. In Part II, a GIS input/output interface is presented along with model validation on three basins within the Upper Trinity basin in Texas.     

POLLUTANT RUNOFF MODELS: SELECTION AND USE IN DECISION MAKING1

Models for pollutant runoff can be useful in water quality management planning if appropriately structured for the problem at hand. Accordingly, a “top-down” approach is proposed for the examination of extant pollutant runoff models. The approach consists of the identification of objectives and attributes that reflect the needs of planners and decision makers when these models are used for water quality management planning. Ideally, the attributes should concern the effect of model information on improved decision making and the cost of model application. Practical difficulties with the first attribute necessitates substitution of surrogate attributes reflecting model appropriateness, resolution, and uncertainty. Common pollutant runoff models, in particular export coefficients and hydrology-driven simulation models, are found to have serious weaknesses on some of the attribute scales. The “top-down” approach leads to a set of desirable pollutant runoff model attributes; alternate modeling techniques are thus examined in order to identify promising future directions for model development. The focus of this examination is phosphorus, due to its importance in the eutrophication of surface waters. Models for both sediment-attached and dissolved phosphorus are considered. Among the conclusions is the belief that the partial contributing area concept can yield an effective yet simple simulation despite the variable and complex nature of runoff.     

Weighting Nitrogen and Phosphorus Pixel Pollutant Loads to Represent Runoff and Buffering Likelihoods

Watershed models often estimate annual nitrogen (N) or phosphorus (P) pollutant loads in rural areas with export coefficient (EC) (kg/ha/yr) values based on land cover, and in urban areas as the product of spatially uniform event mean concentration (EMC) (mg/L) values and runoff volume. Actual N and P nonpoint source (NPS) pollutant loading has more spatial complexity due to watershed variation in runoff likelihood and buffering likelihood along surface and subsurface pathways, which can be represented in a contributing area dispersal area (CADA) NPS model. This research develops a CADA NPS model to simulate how watershed properties of elevation, land cover, and soils upslope and downslope of each watershed pixel influence nutrient loading. The model uses both surface and subsurface runoff indices (RI), and surface and subsurface buffer indices (BI), to quantify the runoff and buffering likelihood for each watershed pixel, and generate maps of weighted EC and EMC values that identify NPS pollutant loading hotspots. The research illustrates how CADA NPS model maps and pixel loading values are sensitive to the spatial resolution and accuracy of elevation and land cover data, and model predictions can represent the lower and upper bounds of NPS loading. The model provides managers with a tool to rapidly visualize, rank, and investigate likely areas of high nutrient export.     

CHALLENGES IN MODELING HYDROLOGIC AND WATER QUALITY PROCESSES IN RIPARIAN ZONES1

This paper presents key challenges in modeling water quality processes of riparian ecosystems: How can the spatial and temporal extent of water and solute mixing in the riparian zone be modeled? What level of model complexity is justified? How can processes at the riparian scale be quantified? How can the impact of riparian ecosystems be determined at the watershed scale? Flexible models need to be introduced that can simulate varying levels of hillslope‐riparian mixing dictated by topography, upland and riparian depths, and moisture conditions. Model simulations need to account for storm event peak flow conditions when upland solute loadings may either bypass or overwhelm the riparian zone. Model complexity should be dictated by the level of detail in measured data. Model algorithms need to be developed using new macro‐scale and meso‐scale experiments that capture process dynamics at the hillslope or landscape scales. Monte Carlo simulations should be an integral part of model simulations and rigorous tests that go beyond simple time series, and point‐output comparisons need to be introduced. The impact of riparian zones on watershed‐scale water quality can be assessed by performing simulations for representative hillsloperiparian scenarios.     

MODELING THE DISTRIBUTION OF DIFFUSE NITROGEN SOURCES AND SINKS IN THE NEUSE RIVER BASIN OF NORTH CAROLINA,USA1

This study quantified nonpoint source nitrogen (NPS‐N) sources and sinks across the 14,582 km² Neuse River Basin (NRB) located in North Carolina, to provide tabular data summaries and graphic overlay products to support the development of management approaches to best achieve established N reduction goals. First, a remote sensor derived, land cover classification was performed to support modeling needs. Modeling efforts included the development of a mass balance model to quantify potential N sources and sinks, followed by a precipitation event driven hydrologic model to effectively transport excess N across the landscape to individual stream reaches to support subsequent labeling of transported N values corresponding to source origin. Results indicated that agricultural land contributed 55 percent of the total annual NPS‐N loadings, followed by forested land at 23 percent (background), and urban areas at 21 percent. Average annual N source contributions were quantified for agricultural (1.4 kg/ha), urban (1.2 kg/ha), and forested cover types (0.5 kg/ha). Nonpoint source‐N contributions were greatest during the winter (40 percent), followed by spring (32 percent), summer (28 percent), and fall (0.3 percent). Seasonal total N loadings shifted from urban dominated and forest dominated sources during the winter, to agricultural sources in the spring and summer. A quantitative assessment of the significant NRB land use activities indicated that high (greater than 70 percent impervious) and medium (greater than 35 percent impervious) density urban development were the greatest contributors of NPS‐N on a unit area basis (1.9 and 1.6 kg/ha/yr, respectively), followed by row crops and pasture/hay cover types (1.4 kg/ha/yr).     

LARGE AREA HYDROLOGIC MODELING AND ASSESSMENT PART II: MODEL APPLICATION1

ABSTRACT: This paper describes the application of a river basin scale hydrologic model (described in Part I) to Richland and Chambers Creeks watershed (RC watershed) in upper Trinity River basin in Texas. The inputs to the model were accumulated from hydro-graphic and geographic databases and maps using a raster-based GIS. Available weather data from 12 weather stations in and around the watershed and stream flow data from two USGS stream gauge station for the period 1965 to 1984 were used in the flow calibration and validation. Sediment calibration was carried out for the period 1988 through 1994 using the 1994 sediment survey data from the Richland-Chambers lake. Sediment validation was conducted on a subwatershed (Mill Creek watershed) situated on Chambers Creek of the RC watershed. The model was evaluated by well established statistical and visual methods and was found to explain at least 84 percent and 65 percent of the variability in the observed stream flow data for the calibration and validation periods, respectively. In addition, the model predicted the accumulated sediment load within 2 percent and 9 percent from the observed data for the RC watershed and Mill Creek watershed, respectively.     

CHANGES IN LAND USE/MANAGEMENT AND WATER QUALITY IN THE LONG CREEK WATERSHED1

ABSTRACT: Surface water in the Long Creek watershed, located in western Piedmont region of North Carolina, was monitored from 1993 to 2001. The 8,190 ha watershed has undergone considerable land use and management changes during this period. Land use surveys have documented a 60 percent decrease in cropland area and a more than 200 percent increase in areas being developed into new homes. In addition, more than 200 conservation practices have been applied to the cropland and other agricultural land that remains in production. The water quality of Long Creek was monitored by collecting grab samples at four sites along Long Creek and continuously monitoring discharge at one site. The monitoring has documented a 70 percent reduction in median total phosphorus (TP) concentrations, with little reductions in nitrate and total Kjel‐dahl nitrogen, or suspended sediment levels. Fecal coliform (FC) and streptococci (FS) levels declined significantly downstream as compared to upstream during the last four years of monitoring. This decrease was attributed to the implementation of waste management practices and livestock exclusion fencing on three dairy operations in the watershed. Annual rainfall and discharge increased steadily until peaking in the third year of the monitoring period and varied while generally decreasing during the last four years of the project. An array of observation, pollutant concentration, and hydrologic data provide considerable evidence to suggest that the implementation of BMPs in the watershed have significantly reduced phosphorus and bacteria levels in Long Creek.     

ANALYSIS AND PREDICTION OF SURFACE RUNOFF IN AN URBANIZING WATERSHED USING SATELLITE IMAGERY1

ABSTRACT: This paper demonstrates how satellite image data [e.g., from Landsat 5 Thematic Mapper (TM)], in conjunction with an urban growth model and simple runoff calculations, can be used to estimate future surface runoff and, by implication, water quality within a watershed. To illustrate the method, predictions of land use change and surface runoff are shown for Spring Creek Watershed, a medium sized urbanizing watershed in Central Pennsylvania. Land cover classifications for this watershed were created from images for summertime 1986 and 1996 and subsequently used as input to the Clarke urban growth model, called SLEUTH, to predict land use changes to the year 2025. Simulations with this model show a progressive growth in the percentage of urban pixels and in impervious surface area in the watershed but also an increase in woodland, primarily in previously clear‐cut areas. Given that woodland area will continue to increase in area, surface runoff into Spring Creek is predicted to remain only slightly above present level. However, should the woodland amount fail to increase, surface runoff is then predicted to increase more significantly during the next 25 years. Finally, the concept of urban sprawl is addressed within the context of predicted increases in urbanization by relating the implied increase in impervious surface area to population density within the watershed.     

HYDROLOGIC MODELING OF A BIOINFILTRATION BEST MANAGEMENT PRACTICE1

ABSTRACT: The goal of this research was to develop a methodology for modeling a bioinfiltration best management practice (BMP) built in a dormitory area on the campus of Villanova University in Pennsylvania. The objectives were to quantify the behavior of the BMP through the different seasons and rainfall events; better understand the physical processes governing the system's behavior; and develop design criteria. The BMP was constructed in 2001 by excavating within an existing traffic island, backfilling with a sand/soil mixture, and planting with salt tolerant grasses and shrubs native to the Atlantic shore. It receives runoff from the asphalt (0.26 hectare) and turf (0.27 hectare) surfaces of the watershed. Monitoring supported by the hydrologic model shows that the facility infiltrates a significant fraction of the annual precipitation, substantially reducing the delivery of nonpoint source pollution and erosive surges downstream. A hydrologic model was developed using HEC‐HMS to represent the site and the BMP using Green‐Ampt and kinematic wave methods. Instruments allow comparison of the modeled and measured water budget parameters. The model, incorporating seasonally variable parameters, predicts the volumes infiltrated and bypassed by the BMP, confirming the applicability of the selected methods for the analysis of bioinfiltration BMPs.     

EXPORT COEFFICIENT MODELING TO ASSESS PHOSPHORUS LOADING IN AN URBAN WATERSHED1

ABSTRACT: An export coefficient modeling approach was used to assess the influence of land use on phosphorus loading to a Southern Ontario stream. A model was constructed for the 1995–1996 water year and calibrated within ± 3 percent of the observed mean concentration of total phosphorus. It was found that runoff from urban areas contributed most to the loading of phosphorus to the stream. When the model was assessed by running it for the 1977–1978 water year, using water quality and land use data collected independently, agreement within ± 7 percent was obtained. The model was then used to forecast the impact of future urban development proposed for the watershed, in terms of phosphorus loading, and to evaluate the reduction in loading resulting from several urban best management practices (BMP). It was determined that phosphorus removal will have to be applied to all the urban runoff from the watershed to appreciably reduce stream phosphorus concentration. Of the BMP designs assessed, an infiltration pond system resulted in the greatest phosphorus load reduction, 50 percent from the 1995–1996 baseline.     

USE OF STAGE DATA TO CHARACTERIZE HYDROLOGIC CONDITIONS IN AN URBANIZING ENVIRONMENT1

ABSTRACT: This paper presents the results of a study on the use of continuous stage data to describe the relation between urban development and three aspects of hydrologic condition that are thought to influence stream ecosystems—overall stage variability, stream flashiness, and the duration of extreme‐stage conditions. This relation is examined using data from more than 70 watersheds in three contrasting environmental settings—the humid Northeast (the metropolitan Boston, Massachusetts, area); the very humid Southeast (the metropolitan Birmingham, Alabama, area); and the semiarid West (the metropolitan Salt Lake City, Utah, area). Results from the Birmingham and Boston studies provide evidence linking increased urbanization with stream flashiness. Fragmentation of developed land cover patches appears to ameliorate the effects of urbanization on overall variability and flashiness. There was less success in relating urbanization and streamflow conditions in the Salt Lake City study. A related investigation of six North Carolina sites with long term discharge and stage data indicated that hydrologic condition metrics developed using continuous stage data are comparable to flow based metrics, particularly for stream flashiness measures.     

THE IMPACT OF RUNOFF GENERATION MECHANISMS ON THE LOCATION OF CRITICAL SOURCE AREAS1

ABSTRACT: Identifying phosphorus (P) source areas and transport pathways is a key step in decreasing P loading to natural water systems. This study compared the effects of two modeled runoff generation processes ‐ saturation excess and infiltration excess ‐ on total phosphorus (TP) and soluble reactive phosphorus (SRP) concentrations in 10 catchment streams of a Catskill mountain watershed in southeastern New York. The spatial distribution of runoff from forested land and agricultural land was generated for both runoff processes; results of both distributions were consistent with Soil Conservation Service‐Curve Number (SCS‐CN) theory. These spatial runoff distributions were then used to simulate stream concentrations of TP and SRP through a simple equation derived from an observed relation between P concentration and land use; empirical results indicate that TP and SRP concentrations increased with increasing percentage of agricultural land. Simulated TP and SRP stream concentrations predicted for the 10 catchments were strongly affected by the assumed runoff mechanism. The modeled TP and SRP concentrations produced by saturation excess distribution averaged 31 percent higher and 42 percent higher, respectively, than those produced by the infiltration excess distribution. Misrepresenting the primary runoff mechanism could not only produce erroneous concentrations, it could fail to correctly locate critical source areas for implementation of best management practices. Thus, identification of the primary runoff mechanism is critical in selection of appropriate models in the mitigation of nonpoint source pollution. Correct representation of runoff processes is also critical in the future development of biogeochemical transport models, especially those that address nutrient fluxes.     

MODELING SEDIMENT AND PHOSPHORUS LOSSES IN AN AGRICULTURAL WATERSHED TO MEET TMDLs1

ABSTRACT: This paper studies the effectiveness of alternative farm management strategies at improving water quality to meet Total Maximum Daily Loads (TMDLs) in agricultural watersheds. A spatial process model was calibrated using monthly flow, sediment, and phosphorus (P) losses (1994 to 1996) from Sand Creek watershed in south‐central Minnesota. Statistical evaluation of predicted and observed data gave r² coefficients of 0.75, 0.69, and 0.49 for flow (average 4.1 m³/s), sediment load (average 0.44 ton/ha), and phosphorus load (average 0.97 kg/ha), respectively. The calibrated model was used to evaluate the effects of conservation tillage, conversion of crop land to pasture, and changes in phosphorus fertilizer application rate on pollutant loads. TMDLs were developed for sediment and P losses based on existing water quality standards and guidelines. Observed annual sediment and P losses exceeded these TMDLs by 59 percent and 83 percent, respectively. A combination of increased conservation tillage, reduced application rates of phosphorus fertilizer, and conversion of crop land to pasture could reduce sediment and phosphorus loads by 23 percent and 20 percent of existing loads, respectively. These reductions are much less than needed to meet TMDLs, suggesting that control of sediment using buffer strips and control of point sources of phosphorus are needed for the remaining reductions.     

RELATIONSHIPS BETWEEN LAND USES AND RAINWATER QUALITY IN A SOUTHCENTRAL PENNSYLVANIA WATERSHED1

ABSTRACT: Spatial and temporal variability in rainfall concentrations of nutrients, major ions, and herbicides was monitored at 7 locations in or near the Conodoguinet Creek watershed in south-central Pennsylvania from 1991.1993. Results were used to (1) compare precipitation quality in forested, agricultural and urban areas, and (2) assess the practicality of using volunteer citizen monitoring in such a study. As indicated in previous studies, sulfate and nitrogen concentrations in precipitation were linked to sample pH. Concentrations of major ions in precipitation appeared to relate more to regional influences rather than local influences. However, concentrations of herbicides in precipitation may have been influenced by both regional and local use which caused compounds like atrazine, deethylatrazine, propazine, simazine, metolachior, alachlor, ametryn, and prometon to be present in detectable concentrations in rainfall. Seasonality was evident in nitrogen, sulfate, pH, and herbicide data and was suggested in calcium, iron, manganese, magnesium, orthophosphate, and chloride data. Agricultural weed control activities were probably responsible for the seasonal pattern in pesticide data which peaked in May and June. Tropical storm Danielle may have caused the apparent seasonal patterns for the other nine parameters. This storm did not follow the typical west to east movement pattern and consequently produced rainfall of relative high quality. A variety of quality assurance checks indicated that trained volunteer citizen monitors were successful participants in this intensive and extensive scientific study, collecting good quality samples in a timely manner. Without this kind of volunteer help, it is extremely difficult to complete studies that require sampling in response to natural events such as rainfall.     

ECONOMIC VALUATION OF RIPARIAN BUFFER AND OPEN SPACE IN A SUBURBAN WATERSHED1

Abstract: This study evaluates the economic value of riparian buffers and open space in a suburban watershed through two nonmarket valuation methods. A contingent valuation survey was implemented in the Dardenne Creek watershed, a suburban watershed of the St. Louis metropolitan area in Missouri, to evaluate the residents' perceptions of and willingness to pay (WTP) for adopting riparian buffers and preserving farmland in a hypothetical real estate market. A hedonic pricing model based on actual sale prices of homes in the watershed was applied to estimate the market value of open space and other environmental conditions such as flood zone and stream proximity in the study area. The results showed that residents' WTP was consistent with the economic values of open space and proximity to streams embedded in existing home prices. Through a better understanding of residents' perceptions and values, riparian buffer and open space programs can be designed and promoted to achieve greater implementation success and environmental benefit.     

GIS‐BASED WATER QUALITY MODELING IN THE SANDUSKY WATERSHED,OHIO, USA1

ABSTRACT: This study focused on the Sandusky Watershed (SW) in Ohio, located within the Great Lakes Basin, with emphasis on two of its subwatersheds, namely Honey Creek (HC) and Rock Creek (RC). The goal was to assess the capabilities of the Soil and Water Assessment Tool (SWAT) to simulate suspended sediment (SS), phosphorus (P) and nitrogen (N) yield in the SW that contribute major sediment and nutrient loads into Lake Erie. The model was calibrated using water flow and water quality parameters for water years 1998 to 1999 and validated model simulations covering the period of water years 2000 to 2001 for monthly conditions. The validation of SS showed correlation coefficients of 0.29 (SW), 0.75 (HC) and 0.69 (RC). Correlation coefficients for P were 0.68 (SW), 0.78 (HC) and 0.37 (RC); for N0₂‐N 0.84 (HC) and 0.38 (RC); for N0₃‐N 0.27 (HC) and 0.76 (RC); for NH₃‐N 0.57 (SW), 0.49 (HC), and 0.13 (RC). In addition, mean errors, root mean square errors, Nash‐Sutcliffe coefficients, and graphs were used to compare simulated to measured data. Simulation success was variable with poor and good simulations, but in most cases, simulated water quality values followed the trend of measured data except for extreme (or intense) rainfall/runoff events. Reviews of 17 applications indicated that the SWAT is suitable for long term continuous simulations but not for storm events. A spatially distributed modeling approach generated maps showing the spatial distribution of SS, P, and N for each simulation element across the Sandusky Watershed.     

WATERSHED AND LAKE WATER QUALITY ASSESSMENT: AN INTEGRATED MODELING APPROACH1

Watershed planning groups and action agencies seek to understand how lake water quality responds to changes in watershed management. This study developed and demonstrated the applicability of an integrated modeling approach for providing this information. An integrated model linking watershed conditions to water-quality of the receiving lake incorporated the following components: (1) an event-based AGNPS model to estimate watershed pollutant losses; (2) annualization of AGNPS results to produce annual lake pollutant loadings; (3) a base flow separation package, SAM, to estimate base flow; (4) estimates of nutrients in base flow and point sources; and (5) linkage of watershed loadings directly to EUTROMOD lake water quality algorithms. Results are presented for Melvern Lake, a 28-km² multipurpose reservoir with a 900-km² agricultural watershed in east central Kansas. Reasonable estimates of current lake quality were attained using an average phosphorus availability factor of 31 percent to calibrate model results to measured in-lake phosphorus. Comparison of a range of possible scenarios, including all cropland changed to no-till (best case) and all CRP and good-condition grasslands changed to cropland (worst case), indicated only a (4 percent change for in-lake phosphorus and a (2 percent change for chlorophyll a. These results indicated that this watershed is not sensitive to projected changes in land use and management.