Emissions of liquefied petroleum gas (LPG) from motor vehicles

Continuous on-site measurements of 50 speciated volatile organic compounds (VOCs) were conducted in downtown Guangzhou to characterize the sources and concentration profiles of ambient VOCs. The synchronicity in diurnal variation between the VOCs and NO suggests that traffic emissions were responsible for the observed VOCs in downtown Guangzhou.It was found that the three major constituent species of liquefied petroleum gas (LPG), i.e., propane, iso-butane, and n-butane, together termed LPG alkanes, contributed, on average, 24% of the total VOCs (TVOCs). Their high correlation and synchronized diurnal variations between NO and the LPG alkanes suggest that their origin lies in LPG fueled car exhaust in Guangzhou. LPG buses and taxis were likely to be responsible for the bulk of ambient LPG species. Using propane and 3-methyl pentane (3MC5A) as the indicators for the LPG and gasoline emissions, respectively, the emissions of the LPG fleet were found to increase more than those of the gasoline fleet during the morning and evening rush hours, as well the noontime break in downtown Guangzhou.Although LPG alkanes account for 24% of the TVOC, their contribution to the total ozone forming potential (OFP) is only about 7%. Ethylene and propylene contribute about 26% to the total OFP despite their lower contribution of 16% to the TVOC.     

Effect of liquefied petroleum gas on ozone formation in Guadalajara and Mexico City

Leakages of liquefied petroleum gas (LPG) are suspected to contribute greatly to ozone (O3) formation in Mexico City. We tested such a hypothesis by outdoor captive-air irradiation (CAI) experiments in the two largest Mexican metropolitan areas: Guadalajara (GMA) in 1997 and Mexico City (MCMA) in 2000. O3 was monitored in each city for 20 days (8:00 a.m.-6:00 p.m.) in smog chambers containing unaltered morning air or morning air enriched with either commercial LPG or LPG synthetic mixture 60/40 (propane and butane). Tested additions of both components were 35% (by volume) in GMA and 60% (by volume) in MCMA. The addition effects on O3 (max) were compared with effects from diluting LPG components or total nonmethane hydrocarbons (tNMHCs) by 50%. Diluting tNMHCs had the greatest absolute effect at both cities: it lowered O3 (max) by 24% in GMA and 55% in MCMA. Adding commercial LPG increased O3 (max) by 6% in GMA and 28% in MCMA; whereas adding LPG synthetic mixture 60/40 caused a similar increase in O3 (max), 4 and 21% in GMA and MCMA, respectively. Compared with dilution of tNMHCs, dilution of LPG-associated compounds had a smaller decreasing effect on O3 (max), only 4% in GMA and 15% in MCMA. These results show that commercial LPG and LPG synthetic mixture 60/40 affect O3 formation to a lesser extent than estimated previously.     

Feasibility of landfill gas as a liquefied natural gas fuel source for refuse trucks

The purpose of this paper is to develop a methodology to evaluate the feasibility of using landfill gas (LFG) as a liquefied natural gas (LNG) fuel source for heavy-duty refuse trucks operating on landfills. Using LFG as a vehicle fuel can make the landfills more self-sustaining, reduce their dependence on fossil fuels, and reduce emissions and greenhouse gases. Acrion Technologies Inc. in association with Mack Trucks Inc. developed a technology to generate LNG from LFG using the CO2 WASH process. A successful application of this process was performed at the Eco Complex in Burlington County, PA. During this application two LNG refuse trucks were operated for 600 hr each using LNG produced from gases from the landfill. The methodology developed in this paper can evaluate the feasibility of three LFG options: doing nothing, electricity generation, and producing LNG to fuel refuse trucks. The methodology involved the modeling of several components: LFG generation, energy recovery processes, fleet operations, economic feasibility, and decision-making. The economic feasibility considers factors such as capital, maintenance, operational, and fuel costs, emissions and tax benefits, and the sale of products such as surplus LNG and food-grade carbon dioxide (CO2). Texas was used as a case study. The 96 landfills in Texas were prioritized and 17 landfills were identified that showed potential for converting LFG to LNG for use as a refuse truck fuel. The methodology was applied to a pilot landfill in El Paso, TX. The analysis showed that converting LFG to LNG to fuel refuse trucks proved to be the most feasible option and that the methodology can be applied for any landfill that considers this option.     

液化石油气轿车实际道路污染物排放特征

利用PEMS对国2技术LPG出租轿车和汽油轿车的实际道路排放进行测试,基于测试数据对LPG轿车排放特征进行解析,并与汽油轿车的排放因子进行对比分析.结果显示:速度和行驶模式对LPG轿车污染物排放影响明显;LPG轿车CO 2、CO、HC和NOx污染物的实测排放因子分别为(169.5±22.2)、(2.18±2.38)、(...     

Techno-economic assessment of coconut biodiesel as a potential alternative fuel for compression ignition engines

Over the past years, there were dramatic improvements in identifying and assessing various feedstocks for the production of biodiesel fuels. To promote a particular feedstock as a renewable source of energy, it is important to analyze their energy, economic, and engine performance characteristics. The current work attempts to evaluate the net energy and economic indices for both fossil diesel and coconut-blended diesel (B20) considering the diesel consumption by the Indian railways. Further, we present the experimental results of a multi-cylinder diesel engine operated with neat coconut biodiesel (B100) and fossil diesel at various load and speed conditions. The engine experiments reveal that the coconut biodiesel exhibits leaner combustion and shorter ignition delay than fossil diesel. Lower amount of carbon monoxide, hydrocarbon, and smoke emission is observed in the case of coconut biodiesel, with higher levels of nitric oxide (14%) and fuel consumption than diesel. The coefficient of variation in indicated mean effective pressure is within the range of better driveability zone for both the fuels at all test conditions. Overall the engine performance, emission and combustion results with neat coconut biodiesel are favorable with a penalty in NO emission at high load conditions. The techno-economical study highlights higher production cost per liter of B20 than the cost of fossil diesel. However, the net energy ratio (NER) for B20 is 1.021, favoring higher output than diesel and thus lowers the dependency on crude oil.

     

The environmental Kuznets curve hypothesis for Bangladesh: the importance of natural gas,liquefied petroleum gas,and hydropower consumption

Environmental Science and Pollution Research - Mitigating environmental pollution has become a global agenda keeping the sustainability of socioeconomic and environmental development into...     

Contribution of liquefied petroleum gas to air pollution in the metropolitan area of Mexico City

An estimation of hydrocarbon emissions caused by the consumption of liquefied petroleum gas (LPG) in the Metropolitan Area of Mexico City (MAMC) is presented. On the basis of experimental measurements at all points of handling, during the distribution process, and during the consumption of LPG in industrial devices and domestic appliances, an estimated 76,414 tons/year are released to the air. The most important contribution is found during the domestic consumption of LPG (70%); this makes the control initiatives available to the consumer. By developing a control program of LPG losses, a 77% reduction in emission is expected in a 5-yr period. The calculated amounts of LPG emissions when correlated with the consumption of LPG, combined with information from air samples from the MAMC, do not point to LPG emissions as the most important factor contributing to tropospheric ozone in the air in Mexico City.     

Morphology and composition of particles emitted from conventional and alternative fuel vehicles

Size, morphology, and composition of airborne particles strongly affect human health and visibility, precipitation, and the kinetic characteristics of particles. In this study, the morphology and chemical composition of particles emitted from conventional (diesel and gasoline) and alternative (CNG and methanol) fuel vehicles were characterized through scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). The SEM images revealed that the size of primary particles (without agglomeration) was approximately 10 nm in the exhaust from all the tested vehicles. The particles emitted from gasoline vehicle (GV), CNG vehicle (CNGV), and methanol vehicle (MV) had the same median diameter, 62 nm, which was smaller than those from heavy diesel vehicle (HDV) and light diesel vehicle (LDV). Soot was observed in the HDV, LDV, and GV samples but not in the CNGV and MV. The fractal dimension, which was used to quantify the degree of irregularity of soot, was 1.752 ± 0.014, 1.789 ± 0.076, and 1.769 ± 0.006 in the exhaust from HDV, LDV, and GV samples, respectively. The particles discharged by all tested vehicles contained the elements C, O, Fe, and Na. The main element in the samples of HDV, LDV, and GV was C, while O was the main element in the samples of alternative fuel vehicles. The profiles of minor elements were more complex in the emissions of alternative fuel vehicles than those in the emissions of conventional fuel vehicles. The results improved our understanding of the morphology and elemental composition of particles emitted from vehicles powered by diesel, gasoline, CNG, and methanol.

     

Toxic emissions from mobile sources: a total fuel-cycle analysis for conventional and alternative fuel vehicles

Mobile sources are among the largest contributors of four hazardous air pollutants--benzene, 1,3-butadiene, acetaldehyde, and formaldehyde--in urban areas. At the same time, federal and state governments are promoting the use of alternative fuel vehicles as a means to curb local air pollution. As yet, the impact of this movement toward alternative fuels with respect to toxic emissions has not been well studied. The purpose of this paper is to compare toxic emissions from vehicles operating on a variety of fuels, including reformulated gasoline (RFG), natural gas, ethanol, methanol, liquid petroleum gas (LPG), and electricity. This study uses a version of Argonne National Laboratory's Greenhouse Gas, Regulated Emissions, and Energy Use in Transportation (GREET) model, appropriately modified to estimate toxic emissions. The GREET model conducts a total fuel-cycle analysis that calculates emissions from both downstream (e.g., operation of the vehicle) and upstream (e.g., fuel production and distribution) stages of the fuel cycle. We find that almost all of the fuels studied reduce 1,3-butadiene emissions compared with conventional gasoline (CG). However, the use of ethanol in E85 (fuel made with 85% ethanol) or RFG leads to increased acetaldehyde emissions, and the use of methanol, ethanol, and compressed natural gas (CNG) may result in increased formaldehyde emissions. When the modeling results for the four air toxics are considered together with their cancer risk factors, all the fuels and vehicle technologies show air toxic emission reduction benefits.     

On-road remote sensing of liquefied petroleum gas (LPG) vehicle emissions measurement and emission factors estimation

In the present study, the real-world on-road liquefied petroleum gas (LPG) vehicle/taxi emissions of carbon monoxide (CO), hydrocarbon (HC) and nitric oxide (NO) were investigated. A regression analysis approach based on the measured LPG vehicle emission data was also used to estimate the on-road LPG vehicle emission factors of CO, HC and NO with respect to the effects of instantaneous vehicle speed and acceleration/deceleration profiles for local urban driving patterns. The results show that the LPG vehicle model years and driving patterns have a strong correlation to their emission factors. A unique correlation of LPG vehicle emission factors (i.e., g km⁻¹ and g l⁻¹) on different model years for urban driving patterns has been established. Finally, a comparison was made between the average LPG, and petrol [Chan, T.L., Ning, Z., Leung, C.W., Cheung, C.S., Hung, W.T., Dong, G., 2004. On-road remote sensing of petrol vehicle emissions measurement and emission factors estimation in Hong Kong. Atmospheric Environment 38, 2055–2066 and 3541] and diesel [Chan, T.L., Ning, Z., 2005. On-road remote sensing of diesel vehicle emissions measurement and emission factors estimation in Hong Kong. Atmospheric Environment 39, 6843–6856] vehicle emission factors. It has shown that the introduction of the replacement of diesel taxis to LPG taxis has alleviated effectively the urban street air pollution. However, it has demonstrated that proper maintenance on the aged LPG taxis should also be taken into consideration.     

Comparing lifetime emissions of natural gas and conventional fuel vehicles: an application of the generalized ANCOVA model

New regulations and incentives are encouraging the use of clean, alternative fuel vehicles (AFVs) in urban areas. These vehicles are seen as one option for reducing air pollution from mobile sources. However, because of the limited number of AFVs on the road, little is known about actual lifetime emissions characteristics of in-use AFVs. This study describes the use of a generalized analysis of covariance model to evaluate and compare the emissions from natural gas vehicles with emissions from reformulated gasoline vehicles. The model describes fleet-wide emissions deterioration, while also accounting for individual vehicle variability within the fleet. This ability to measure individual vehicle variability can then be used to provide realistic bounds for the emissions deterioration in individual vehicles and the fleet as a whole. In order to illustrate the use of the model, the carbon monoxide, oxides of nitrogen (NOx), non-methane hydrocarbon (NMHC), and carbon dioxide emissions characteristics of a fleet of dedicated natural gas Dodge Ram vans and a fleet of dedicated reformulated gasoline Dodge Ram vans operating in the U.S. government fleet are explored. The analysis demonstrates the utility of the statistical method and suggests a potential for natural gas Dodge Ram vans to be generally cleaner than their conventional fuel counterparts. However, in the case of NOx and NHMCs, the analysis also suggests that these emissions benefits might be reduced over the vehicle lifetime due to higher emissions deterioration rates for natural gas vehicles. As this paper is aimed at illustrating the analysis of the covariance model, the results reported herein should be considered within the context of a more comprehensive study of these data before general conclusions are possible. Generalization of these findings to other vehicle models and alternative fuel technologies is not justified without further study.     

Valorization of spent coffee grounds recycling as a potential alternative fuel resource in Turkey: An experimental study

In this study, recycling of spent coffee grounds (SCG) as a potential feedstock for alternative fuel production and compounds of added value in Turkey was assessed. The average oil content was found (≈ 13% w/w). All samples (before and after extraction) were tested for scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), calorific value, surface analysis and porosity, Fourier transform infrared (FT-IR), and elemental analysis to assess their potential towards fuel properties. Elemental analysis indicated that carbon represents the highest percentages (49.59% and 46.42%, respectively), followed by nitrogen (16.7% and 15.5%), hydrogen (6.74% and 6.04%), and sulfur (0.851% and 0.561%). These results indicate that SCG can be utilized as compost, as it is rich in nitrogen. Properties of the extracted oil were examined, followed by biodiesel production. The quality of biodiesel was compared with American Society for Testing and Materials (ASTM) D6751 standards, and all the properties complied with standard specifications. The fatty acid compositions were analyzed by gas chromatography. It was observed that coffee waste methyl ester (CWME) is mainly composed of palmitic (35.8%) and arachidic (44.6%) acids, which are saturated fatty acids. The low degree of unsaturation provides an excellent oxidation stability (10.4 hr). CWME has also excellent cetane number, higher heating value, and iodine value with poor cold flow properties. The studies also investigated blending of biodiesel with Euro diesel and butanol. Following this, a remarkable improvement in cloud and pour points of biodiesel was obtained. Spent coffee grounds after oil extraction is an ideal material for garden fertilizer, feedstock for ethanol, biogas production, and as fuel pellets. The outcome of such research work produces valuable insights on the recycling importance of SCG in Turkey.

Implications: Coffee is a huge industry, and coffee has been widely used due to its refreshing properties. This industry generates large quantities of waste. Therefore, recycling of spent coffee grounds for producing alternative fuels and compounds of added value is crucial. Elemental analysis indicated that coffee waste can be utilized as compost, as it is rich in nitrogen. Coffee waste after oil extraction is an ideal feedstock for ethanol and biogas production, garden fertilizer, and as fuel pellets. The low degree of unsaturation provides excellent oxidation stability. Its biodiesel has also excellent cetane number, higher heating value, and lower iodine value.     

The potential near-source ozone impacts of upstream oil and gas industry emissions

Increased drilling in urban areas overlying shale formations and its potential impact on human health through decreased air quality make it important to estimate the contribution of oil and gas activities to photochemical smog. Flares and compressor engines used in natural gas operations, for example, are large sources not only of NOx but also offormaldehyde, a hazardous air pollutant and powerful ozone precursor We used a neighborhood scale (200 m horizontal resolution) three-dimensional (3D) air dispersion model with an appropriate chemical mechanism to simulate ozone formation in the vicinity ofa hypothetical natural gas processing facility, based on accepted estimates of both regular and nonroutine emissions. The model predicts that, under average midday conditions in June, regular emissions mostly associated with compressor engines may increase ambient ozone in the Barnett Shale by more than 3 ppb beginning at about 2 km downwind of the facility, assuming there are no other major sources of ozone precursors. Flare volumes of 100,000 cubic meters per hour ofnatural gas over a period of 2 hr can also add over 3 ppb to peak 1-hr ozone somewhatfurther (>8 km) downwind, once dilution overcomes ozone titration and inhibition by large flare emissions of NOx. The additional peak ozone from the hypothetical flare can briefly exceed 10 ppb about 16 km downwind. The enhancements of ambient ozone predicted by the model are significant, given that ozone control strategy widths are of the order of a few parts per billion. Degrading the horizontal resolution of the model to 1 km spuriously enhances the simulated ozone increases by reducing the effectiveness of ozone inhibition and titration due to artificial plume dilution.     

Total fuel-cycle analysis of heavy-duty vehicles using biofuels and natural gas-based alternative fuels

Heavy-duty vehicles (HDVs) present a growing energy and environmental concern worldwide. These vehicles rely almost entirely on diesel fuel for propulsion and create problems associated with local pollution, climate change, and energy security. Given these problems and the expected global expansion of HDVs in transportation sectors, industry and governments are pursuing biofuels and natural gas as potential alternative fuels for HDVs. Using recent lifecycle datasets, this paper evaluates the energy and emissions impacts of these fuels in the HDV sector by conducting a total fuel-cycle (TFC) analysis for Class 8 HDVs for six fuel pathways: (1) petroleum to ultra low sulfur diesel; (2) petroleum and soyoil to biodiesel (methyl soy ester); (3) petroleum, ethanol, and oxygenate to e-diesel; (4) petroleum and natural gas to Fischer-Tropsch diesel; (5) natural gas to compressed natural gas; and (6) natural gas to liquefied natural gas. TFC emissions are evaluated for three greenhouse gases (GHGs) (carbon dioxide, nitrous oxide, and methane) and five other pollutants (volatile organic compounds, carbon monoxide, nitrogen oxides, particulate matter, and sulfur oxides), along with estimates of total energy and petroleum consumption associated with each of the six fuel pathways. Results show definite advantages with biodiesel and compressed natural gas for most pollutants, negligible benefits for e-diesel, and increased GHG emissions for liquefied natural gas and Fischer-Tropsch diesel (from natural gas).     

Assessment of tropospheric ozone at an industrial site of Chennai megacity

This paper presents the temporal variation in surface-level ozone (O₃) measured at Gummidipoondi near Chennai, Tamilnadu. The site chosen for the present study has high potential for ozone generation sources, such as vehicular traffic and industrial activities. The site is also located near a hazardous waste management facility. The key sources of nitrogen oxides (NO_x), which are considered to be an important precursor of O₃, include hazardous waste incineration, trucks bringing the hazardous wastes, and vehicles plying on the nearby National Highway 16 (NH 16). The measurements clearly showed diurnal variation, with maximum values observed during the noon hours and minimum values observed when solar radiation was less. The data showed a marked seasonal variation in O₃, with the highest hourly average O₃ concentration (497.2 µg/m³) in the summer season. Consequently, in order to identify the long-range transport sources adding to the increased O₃ levels, backward trajectories were computed using the Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model. It was found that the polluted air mass originated from the Southeast Asian region and the Indo-Gangetic Plain. The polluted air mass, which advected large amounts of carbon monoxide (CO) plumes, was analyzed using the Measurement of Pollution in the Troposphere (MOPITT) retrievals. The correlations of O₃ with temperature (r = 0.746; P < 0.01) and solar radiation (r = 0.751; P < 0.01) were strongly positive, and that with NO_x was found to be negative. Stronger correlation of O₃ with NO_x was observed during pre-monsoon months (r = 0.627; P < 0.01) and following hours of photochemical reactions. There were substantial differences in concentrations between weekdays and weekends, with higher nitric oxide (NO) and nitrogen dioxide (NO₂), but lower O₃, concentrations on weekdays. A substantial weekday-weekend difference in O₃, which was higher on weekends, appears to be attributable to lower daytime traffic activity and hence reduced emissions of NO_x to a “NO_x-saturated” atmosphere.

Implications: The assessment of ground-level ozone in an industrial area with hazardous waste management facility is very important, as there is high possibility for more generation of tropospheric ozone. Since the location of the study area is coastal, wind plays a major role in O₃ transportation; hence, the effects of wind speed and wind direction have been studied in different seasons. When compared with the other studies carried out in different places across India, the present study area has recorded much greater O₃ mixing ratio. This study can be useful for setting up control strategies in such industrial areas.     

Combustion,performance, and emission characteristics of diesel engine using oxyhydrogen gas as a fuel additive

Environmental Science and Pollution Research - A lot of research is being carried out to reduce the environmental pollution resulting from compression ignition engines. For this, various gaseous...     

Feasibility of ultraviolet-light-emitting diodes as an alternative light source for photocatalysis

The objective of this study was to determine whether ultraviolet-light-emitting diodes (UV-LEDs) could serve as an efficient photon source for heterogeneous photocatalytic oxidation (PCO). An LED module consisting of 12 high-power UV-A (lambda max = 365 nm) LEDs was designed to be interchangeable with a UV-A fluorescent black light blue (BLB) lamp for a bench scale annular reactor packed with silica-titania composite (STC) pellets. Lighting and thermal properties of the module were characterized to assess its uniformity and total irradiance. A forward current (I(F)) of 100 mA delivered an average irradiance of 4.0 mW cm(-2) at a distance of 8 mm, which is equivalent to the maximum output of the BLB, but the irradiance of the LED module was less uniform than that of the BLB. The LED and BLB reactors were tested for the oxidization of ethanol (50 ppm(v)) in a continuous-flow-through mode with 0.94 sec residence time. At the same average irradiance, the UV-A LED reactor resulted in a lower CO2 production rate (19.8 vs. 28.6 nmol L(-1) s(-1)), lower ethanol removal (80% vs. 91%), and lower mineralization efficiency (28% vs. 44%) than the UV-A BLB reactor. Ethanol mineralization was enhanced with the increase of the irradiance at the catalyst surface. This result suggests that reduced ethanol mineralization in the LED reactor relative to the BLB reactor at the same average irradiance could be attributed to the nonuniform irradiance over the photocatalyst, that is, a portion of the catalyst was exposed to less than the average irradiance. The potential of UV-A LEDs may be fully realized by optimizing the light distribution over the catalyst and utilizing their instantaneous "on" and "off" feature for periodic irradiation. Nevertheless, our results also showed that the current UV-A LED module had the same wall plug efficiency (WPE) of 13% as that of the UV-A BLB, demonstrating that UV-A LEDs are a viable photon source both in terms of WPE and PCO efficiency.     

An assessment of air emissions from liquefied natural gas ships using different power systems and different fuels

The shipping industry has been an unrecognized source of criteria pollutants: nitrogen oxides (NOx), volatile organic compounds, coarse particulate matter (PM10), fine particulate matter (PM2.5), sulfur dioxide (SO2), and carbon monoxide (CO). Liquefied natural gas (LNG) has traditionally been transported via steam turbine (ST) ships. Recently, LNG shippers have begun using dual-fuel diesel engines (DFDEs) to propel and offload their cargoes. Both the conventional ST boilers and DFDE are capable of burning a range of fuels, from heavy fuel oil to boil-off-gas (BOG) from the LNG load. In this paper a method for estimating the emissions from ST boilers and DFDEs during LNG offloading operations at berth is presented, along with typical emissions from LNG ships during offloading operations under different scenarios ranging from worst-case fuel oil combustion to the use of shore power. The impact on air quality in nonattainment areas where LNG ships call is discussed. Current and future air pollution control regulations for ocean-going vessels (OGVs) such as LNG ships are also discussed. The objective of this study was to estimate and compare emissions of criteria pollutants from conventional ST and DFDE ships using different fuels. The results of this study suggest that newer DFDE ships have lower SO2 and PM2.5/PM10 emissions, conventional ST ships have lower NOx, volatile organic compound, and CO emissions; and DFDE ships utilizing shore power at berth produce no localized emissions because they draw their required power from the local electric grid.     

Assessment of Arthrobacter viscosus as reactive medium for forming permeable reactive biobarrier applied to PAHs remediation

Polycyclic aromatic hydrocarbons (PAHs) are significant environmental contaminants as they are present naturally as well as anthropogenically in soil, air and water. In spite of their low solubility, PAHs are spread to the environment, and they are present in surface water, industrial effluent or groundwater. Amongst all remediation technologies for treating groundwater contaminated with PAHs, the use of a permeable reactive biobarrier (PRBB) appears to be the most cost-effective, energy efficient, and environmentally sound approach. In this technology, the microorganisms are used as reactive medium to degrade or stabilize the contaminants. The main limits of this approach are that the microorganisms or consortium used for forming the PRBB should show adequate characteristics. They must be retained in the barrier-forming biofilm, and they should also have degradative ability for the target pollutants. The aim of the present work is to evaluate the viability of Arthrobacter viscosus as bioreactive medium for forming PRBB. Initially, the ability of A. viscosus to remove PAHs, benzo[a]anthracene 100 μM and phenanthrene 100 μM was evaluated operating in a batch bench-scale bioreactor. In both cases, total benzo[a]anthracene and phenanthrene removals were obtained after 7 and 3 days, respectively. Furthermore, the viability of the microorganisms was evaluated in the presence of chromium in a continuous mode. As a final point, the adhesion of A. viscosus to sepiolite forming a bioreactive material to build PRBB was demonstrated. In view of the attained results, it can be concluded that A. viscosus could be a suitable microorganism to form a bioreactive medium for PAHs remediation.     

Implementation of a top-down noise control strategy for a liquefied natural gas peak-shaving facility

There have been many previous noise-related studies on liquefied natural gas (LNG) facilities in the United States; however, noise control of these facilities using a top-down approach has not been explored in detail. Most studies have demonstrated noise compliance to applicable standards by focusing on a combination of treatments and specifications, with less consideration on control technology feasibility, ranking, and cost-effectiveness. The Federal Energy Regulatory Commission (FERC) prohibits natural gas facilities from emitting day-night noise levels in excess of 55 dB(A) (equivalent to 24-hr continuous level of 49 dB(A)) at nearby receivers. A case study was conducted to evaluate a top-down approach to reduce noise at a typical LNG peak-shaving facility under normal operating conditions, accounting for technical feasibility, control effectiveness, and cost implications. A modeling approach (International Organization for Standardization standard ISO 9613-2) was used to predict and evaluate the facility’s noise reduction potential. The study found that the strategy could achieve feasible and environmentally effective reductions up to 11 dB(A) at 500 m from the facility by first identifying source groups with highest-emitting sources and then targeting major noise source contributors per group. This approach is cost-effective because the FERC noise goals can still be achieved by avoiding unnecessary control costs associated with lower-ranked sources. The study identified the following four source groups as the highest noise emitters: (1) liquefaction and instrument air, (2) boil-off gas (BOG) compression, (3) glycol water system (air coolers), and (4) pretreatment. Of all the treatments evaluated, installation of enhanced silencers for gas turbine (GT) package—as well as construction of an acoustical building for the BOG compressors and drivers—resulted in the greatest noise reduction at nearby receivers. The study notes that incremental treatment costs presented in this paper are approximate estimates that may vary depending on factors such as facility size and region.

Implications: This study assessed potential noise reductions associated with implementing a top–down noise control strategy on a typical LNG peak-shaving facility. The study determined the top–down noise control strategy could achieve feasible and environmentally effective reductions up to 11 decibels at receivers within 500 m from the facility’s center. As LNG suppliers need to support potential supply disruptions, some regions of the US, including New England and Gulf Coast with projected increase in LNG exports and growing needs from power sector, may find information in this study useful with regard to evaluating and prioritizing noise reduction potential of their LNG peak-shaving facilities.