Constructed wetlands for wastewater treatment in cold climate — A review

Constructed wetlands (CWs) have been successfully used for treating various wastewaters for decades and have been identified as a sustainable wastewater management option worldwide. However, the application of CW for wastewater treatment in frigid climate presents special challenges. Wetland treatment of wastewater relies largely on biological processes, and reliable treatment is often a function of climate conditions. To date, the rate of adoption of wetland technology for wastewater treatment in cold regions has been slow and there are relatively few published reports on CW applications in cold climate. This paper therefore highlights the practice and applications of treatment wetlands in cold climate. A comprehensive review of the effectiveness of contaminant removal in different wetland systems including: (1) free water surface (FWS) CWs; (2) subsurface flow (SSF) CWs;and (3) hybrid wetland systems, is presented. The emphasis of this review is also placed on the influence of cold weather conditions on the removal efficacies of different contami-nants. The strategies of wetland design and operation for performance intensification, such as the presence of plant, operational mode, effluent recirculation, artificial aeration and in-series design, which are crucial to achieve the sustainable treatment performance in cold climate, are also discussed. This study is conducive to further research for the understanding of CW design and treatment performance in cold climate.     

Advances in chemical technologies for water and wastewater treatment： preface

Chemical technologies have been applied for water and wastewater treatment since more than 150 year ago,and are still playing the leading role in this field. With the fast development of sciences and technologies especially in the last     

Study of prediction for groundwater contamination in wastewater land treatment system

This paper uses a prediction model of groundwater pollution based on the experiments in the laboratory and in field .The model, which was tested and calibrated by the field observated data ,satisfactorily simulated the field conditions in land treatment system of wastewater . Particularly , the model can provide the reliable pollution prediction of heavy metals , organisms and nitrogen . The model was used to predict the groundwater pollution caused by the land treatment system in the region of North China . The calibration of the model showed that correlation coefficients between the tested and predictive data of Cr6+. As3+, organism and NH4+ could reach 0.990, which proved that the model possessed the realistic instructive significance for design and use of wastewater land treatment systems .     

Application of high OLR-fed aerobic granules for the treatment of low-strength wastewater：Performance, granule morphology and microbial community

Aerobic granules, pre-cultivated at the organic loading rate (OLR) of 3.0 kg COD/(m3 ·day), were used to treat low-strength wastewater in two sequencing batch reactors at low OLRs of 1.2 and 0.6 kg COD/(m3 ·day), respectively. Reactor performance, evolution of granule morphology, structure and microbial community at low OLRs under long-term operation (130 days) were investigated. Results showed that low OLRs did not cause significant damage to granule structure as a dominant granule morphology with size over 540 μm was maintained throughout the operation. Aerobic granules at sizes of about 750 μm were finally obtained at the low OLRs. The granule reactors operated at low OLRs demonstrated effective COD and ammonia removals (above 90%), smaller granule sizes and less biomass. The contents of extracellular polymeric substances in the granules were decreased while the ratios of exopolysaccharide/exoprotein were increased (above 1.0). The granules cultivated at the low OLRs showed a smoother surface and more compact structure than the seeded granules. A significant shift in microbial community was observed but the microbial diversity remained relatively stable. Confocal Laser Scanning Microscopy observation showed that the live cells were spread throughout the whole granule, while the dead cells were mainly concentrated in the outer layer of the granule, and the proteins, polysaccharides and lipids were mainly located in the central regime of the granule. In conclusion, granules cultivated at high OLRs show potential for treating low-strength organic wastewater steadily under long-term operation.     

Application of photoelectrochemical–electrodialysis treatment for the recovery and reuse of water from tannery effluents

The conventional tannery effluents treatment is not established in order to obtain water in such a quality, that it could be reused in the same process. This study was carried out in order to evaluate the electrochemical treatment of tannery effluents. The photoelectrochemical oxidation and the electrodialysis were applied in these effluents. The obtained results indicated a remarkable removal efficiency of more than 98.5% for all ion species present in effluents. It is noticeable that the effluent treated with combined PEO–ED techniques presents very similar values for the same parameter as the ones presented by normal feed water.     

Adsorption and desorption of Cu(Ⅱ) and Pb(Ⅱ) in paddy soils cultivated for various years in the subtropical China

The adsorption and desorption of Cu(Ⅱ) and Pb(Ⅱ) on upland red soil,and paddy soils which were originated from the upland soil and cultivated for 8,15,35 and 85 years,were investigated using the batch method.The study showed that the organic matter content and cation exchange capacity (CEC) of the soils are important factors controlling the adsorption and desorption of Cu(Ⅱ) and Pb(Ⅱ).The 15-Year paddy soil had the highest adsorption capacity for Pb(Ⅱ),followed by the 35-Year paddy soil.Both the 35-Year paddy soil and 15-Year paddy soil adsorbed more Cu(Ⅱ) than the upland soil and other paddy soils.The 15-Year paddy soils exhibited the highest desorption percentage for both Cu(Ⅱ) and Pb(Ⅱ).These results are consistent with the trend for the CEC of the soils tested.The high soil CEC contributes not only to the adsorption of Cu(Ⅱ) and Pb(Ⅱ) but also to the electrostatic adsorption of the two heavy metals by the soils.Lower desorption percentages for Cu(Ⅱ) (36.7% to 42.2%) and Pb(Ⅱ) (50.4% to 57.9%) were observed for the 85-Year paddy soil.The highest content of organic matter in the soil was responsible for the low desorption percentages for the two metals because the formation of the complexes between the organic matter and the metals could increase the stability of the heavy metals in the soils.     

Organobentonites as adsorbents for some organic pollutants and its application in wastewater treatment

Ｏｒｇａｎｏｂｅｎｔｏｎｉｔｅｓａｓａｄｓｏｒｂｅｎｔｓｆｏｒｓｏｍｅｏｒｇａｎｉｃｐｏｌｌｕｔａｎｔｓａｎｄｉｔｓａｐｐｌｉｃａｔｉｏｎｉｎｗａｓｔｅｗａｔｅｒｔｒｅａｔｍｅｎｔ￥ＺｈｕＬｉｚｈｏｎｇ；ＺｈａｎｇＪｉａｎｙｉｎｇ；ＬｉＹｉｍｉｎ；Ｓ...     

The method on recovery of forest vegetation in degraded ecosystem in tropical and subtropical waste lowland in Guangdong

The aim of this paper is to discuss the reasonable method to set up the man-made ecosystem where the high productivity, high economic effects and ecological efficiencies, continual resources and suitable environment could be obtained.     

New process for anaerobic treatment of Vitamin C wastewater in a full scale plant

１ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅＦｉｒｓｔＰｈａｒｍａｃｅｕｔｉｃａｌＦａｃｔｏｒｙｉｎＳｈｉｊｉａｚｈｕａｎｇＣｉｔｙ，Ｃｈｉｎａ，ｂｕｉｌｔａｓｅｔｏｆｅｑｕｉｐｍｅｎｔｏｆｆｕｌｓｃａｌｅｔｒｅａｔｉｎｇＶｉｔａｍｉｎＣｗａｓｔｅｗａｔｅｒｉｎ...     

Brief introduction of ten-year (1991-2000) programme of science and technology for environmental protection in China (Abstract)

1 Science and technology for environmental protection in China The guiding principles in formulating the ten-year Programme of science and tech-nology for environmental protection are as follows: 1.1 Science and technology should be great to the need economic construction and economic construction must rely on science and technology.     

Aspects of wet,acidifying deposition in Arnhem: Source regions,correlations and trends (1984–1991)

A time series of wet deposition in Arnhem, the Netherlands, was analysed for the period 1984–1991. Precipitation was collected with four samplers on a daily basis. A comparative study by the Dutch National Precipitation Network showed significant biases for the observations of the National Network station due to longer exposure to dry deposition. Simultaneous operation of wet-only and bulk collectors demonstrated a concentration bias of about 10% for daily bulk sampling.Using a cluster analysis of backward trajectories, clear distinctions could be made between precipitation from continental and maritime origin. Event-to-event variations in deposition seemed to be determined largely by meteorological influences. As major anthropogenic source regions, the U.K., France, Belgium and the Netherlands itself were identified. The contribution of Dutch sources to wet acid deposition in Arnhem was estimated at 30–40%.Trends and seasonal variations were analysed with an advanced time-series model based on Kalman filtering. Similar seasonal variations were found for SO₄²⁻ and NH₄⁺. Also, seasonal variations in the concentrations of H⁺ and NO₃⁻ corresponded. Significant long-term changes in deposition and concentration were found for SO₄²⁻ (about −3% yr⁻¹) and H⁺ (about −9% yr⁻¹) only. The analysed trends were decreasing, but decreases were larger in the years 1984–1986 than in the following years. The relative decrease in the wet deposition of SO₄²⁻ was substantially smaller than decrease in dry-deposited SO₂ and SO₄²⁻.     

Distribution of polychlorinated biphenyls in effluent from a large municipal wastewater treatment plant: Potential for bioremediation?

This study involved an evaluation of the potential for bioremediation of polychlorinated biphenyls(PCBs) in the effluent from a large municipal wastewater treatment plant. It was focused on the presence of PCBs in two types of effluents: the continuous effluent present during dry weather conditions and the intermittently present effluent that was present during wet weather due to incoming stormwater. The annual discharge of PCBs for both types of effluent was calculated based on a five-year dataset(2011–2015). In addition, the toxicity and bioremediation potential of the PCBs in the effluent were also assessed. It was found that the continuous effluent was responsible for the majority of the discharged PCB into the receiving river(1821 g for five years), while the intermittent effluent contributed 260 g over the five years.The average number of chlorine per biphenyl for the detected PCB congeners showed a 19%difference between the two types of effluent, which indicated a potential for organohalide respiration of PCBs during the continuous treatment. This was further supported by a high level of tri-, tetra-and penta-chlorinated congeners accounting for 75% of the anaerobically respired PCBs. Potential for aerobic degradation and thus biomineralization of PCBs was identified for both effluents. Furthermore, toxicity of 12 dioxin-like PCBs showed that normal operation of the wastewater reduced the toxicity throughout the wastewater treatment plant.     

Alkynyl carbon materials as novel and efficient sorbents for the adsorption of mercury(Ⅱ) from wastewater

For the first time, a series of alkynyl carbon materials(ACMs) were prepared via the mechanochemical reaction of CaC_2 with six polyhalogenated precursors, namely CCl_4,C_2Cl_6, C_2Cl_4, C_6Cl_6, C_6Br_6, and C_(14)H_4Br_(10)(ACM-1, ACM-2, ACM-3, ACM-4, ACM-5, and ACM-6,respectively) and used for the adsorptive removal of mercury from aqueous solutions.Based on preliminary investigations, the adsorption of mercury on ACM-5 was studied in depth. Specifically, the effect of p H on mercury adsorptivity, adsorption kinetics,thermodynamics, isotherms, and recyclability was studied. The adsorptivity of mercury on ACMs was found to be closely related to the hydrocarbon precursor, specific surface area of sorbent, and the alkynyl content. ACM-5 showed the best performance and is among the best raw carbonaceous sorbents reported so far, with a Langmuir saturated adsorption capacity of 191.9 mg g~(-1). The promising mercury adsorption performance mainly arises from the strong Lewis soft acid–soft base interactions between the alkynyl groups and mercury ions. The adsorption isotherms could be satisfactorily correlated with the Langmuir equation. The results show that the ACMs can be used as efficient sorbents for the removal of mercury and may also be useful for the adsorption of other heavy metals.     

Synthesis of a novel illite@carbon nanocomposite adsorbent for removal of Cr(Ⅵ) from wastewater

A novel illite@carbon(I@C) nanocomposite adsorbent has been synthesized via a facile hydrothermal carbonization process(HTC) using glucose as carbonaceous source and illite as the carrier.The morphology,microstructure and surface properties of the prepared nanocomposite adsorbent were analyzed by FESEM,TGA,XRD,FT-IR and Zeta potential measurements.Batch experiments were carried out on the adsorption of Cr(Ⅵ) to determine the adsorption properties of the composite.The adsorption of Cr(Ⅵ) onto the I@C nanocomposite was well described by the pseudo-second-order kinetic model and Langmuir isotherm.Compared with the illite and carbon material(SC) separately,the prepared I@C nanocomposite adsorbent exhibited enhanced adsorption performance for Cr(Ⅵ) with a maximum adsorption capacity of 149.25 mg/g,which was higher than that of most reported adsorbents.In addition,the adsorption process was spontaneous and endothermic based on the adsorption thermodynamics study.The adsorption of Cr(Ⅵ) by I@C was highly p H-dependent and the optimum adsorption occurred at p H 2.0.The Zeta potential analysis results indicated that the electrostatic interactions between anionic Cr(Ⅵ) and the positively charged surface of the adsorbent might be critical to the adsorption mechanism.This study demonstrated that the I@C nanocomposite should be a promising candidate for a low-cost,environmental friendly and highly efficient adsorbent for the removal of toxic Cr(Ⅵ) from wastewater.     

Numerical modeling method on the movement of water flow and suspended solids in two-dimensional sedimentation tanks in the wastewater treatment plant

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｗａｔｅｒｔｒｅａｔｍｅｎｔｔｅｃｈｎｏｌｏｇｙ ,ｔｈｅｍｏｓｔｃｏｍｍｏｎｌｙｕｓｅｄｍｅｔｈｏｄｏｆｓｏｌｉｄｌｉｑｕｉｄｓｅｐａｒａｔｉｏｎｉｓｇｒａｖｉｔａｔｉｏｎａｌｓｅｄｉｍｅｎｔａｔｉｏｎ .Ｆｒｏｍｓｔａｔｉｓｔｉｃｓ,ｏｎｅｑｕａｒｔｅｒｏｆｔｈｅｔｏｔａｌｉｎｖｅｓｔｍｅｎｔｏｆｔｈｅｗａｓｔｅｗａｔｅｒｔｒｅａｔｍｅｎｔｐｌａｎｔｉｓｕｓｅｄｆｏｒｓｅｄｉｍｅｎｔａｔｉｏｎｔａｎｋｓ (Ｓｗａｍｅｅ ,1 996) .Ｗｉｔｈｔｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆｃ…     

Application of KCl-denuder for measuring gas-phase mercuric species(Hg~(2+))in atmosphere

ＡｐｐｌｉｃａｔｉｏｎｏｆＫＣｌｄｅｎｕｄｅｒｆｏｒｍｅａｓｕｒｉｎｇｇａｓｐｈａｓｅｍｅｒｃｕｒｉｃｓｐｅｃｉｅｓ（Ｈｇ２＋）ｉｎａｔｍｏｓｐｈｅｒｅＷｅｉＳｈｉｑｉａｎｇＣｏｌｅｇｅｏｆＥｎｖｉｒｏｎｍｅｎｔａｎｄＲｅｓｏｕｒｃｅｓ，Ｓｏｕｔ...     

Torpor and activity in a free-ranging tropical bat: implications for the distribution and conservation of mammals?

Bats are most diverse in the tropics, but there are no quantitative data on torpor use for energy conservation by any tropical bat in the wild. We examined the thermal biology, activity patterns and torpor use of two tree-roosting long-eared bats (Nyctophilus geoffroyi, 7.8?g) in tropical northern Australia in winter using temperature telemetry. Bats commenced activity about 20?min after sunset, ended activity about 2.5?h before sunrise and entered torpor everyday in the early morning even when minimum ambient temperatures (T _a) were as high as 23°C. On average, bats remained torpid for almost 5?h, mean minimum skin temperature (T _skin) measured was 22.8?±?0.1°C and daily T _skin minima were correlated with T _a. Our study shows that even in the tropics, torpor is frequently employed by bats, suggesting that worldwide most bat species are heterothermic and use torpor for energy conservation. We propose that the ability of employing torpor and the resulting highly plastic energy requirements may partially explain why these small insectivorous bats can inhabit almost the entire Australian continent despite vastly different climatic and likely trophic conditions. Reduced energy requirements also may permit survival in degraded or modified habitats, reduce the need for foraging and reduce exposure to predators. Thus, the ability to employ torpor may be one important reason for why most Australian bats and other heterothermic mammals have not gone extinct whereas many obligatory homeothermic mammals that cannot employ torpor and have high energy and foraging requirements have suffered high rates of extinctions.     

Isolation of Cr(Ⅵ) reducing bacteria from industrial effluents and their potential use in bioremediation of chromium containing wastewater

The present study is aimed at assessing the ability of Bacillus sp.JDM-2-1 and Staphylococcus capitis to reduce hexavalent chromium into its trivalent form.Bacillus sp.JDM-2-1 could tolerate Cr(Ⅵ) (4800 μg/mL) and S.capitis could tolerate Cr(Ⅵ) (2800 μg/mL).Both organisms were able to resist Cd2+ (50 μg/mL),Cu2+ (200 μg/mL),Pb2+ (800 μg/mL),Hg2+ (50 μg/mL) and Ni2+ (4000 μg/mL).S.capitis resisted Zn2+ at 700 μg/mL while Bacillus sp.JDM-2-1 only showed resistance up to 50 μg/mL.Bacillus sp.JDM-2-1 and S.capitis showed optimum growth at pH 6 and 7,respectively,while both bacteria showed optimum growth at 37℃.Bacillus sp.JDM-2-1 and S.capitis could reduce 85% and 81% of hexavalent chromium from the medium after 96 h and were also capable of reducing hexavalent chromium 86% and 89%,respectively,from the industrial effluents after 144 h.Cell free extracts of Bacillus sp.JDM-2-1 and S.capitis showed reduction of 83% and 70% at concentration of 10 μg Cr(Ⅵ)/mL,respectively.The presence of an induced protein having molecular weight around 25 kDa in the presence of chromium points out a possible role of this protein in chromium reduction.The bacterial isolates can be exploited for bioremediation of hexavalent chromium containing wastes,since they seem to have the potential to reduce the toxic hexavalent form to its nontoxic trivalent form.     

GMO and sustainable development in less favoured regions—the need for alternative paths of development

The risk assessment for new technologies, like the use of GMO in the agricultural production, becomes enormously complex. It cannot be limited to purely natural–scientific analysis. Socio-economic factors need to be considered as well. The active promotion of GMO-free areas is discussed as a means for an alternative path of development. Economically less favoured and at the same time ecologically sensitive areas are suitable for the territorial application of this concept. The state of discussion on the influences of the agricultural use of GMO on the regional development of less favoured and ecologically sensitive regions is presented. The social acceptance of GMO-free areas was tested in a survey, which was conducted in 1999 in Austria. The results suggest that the idea is worth being pursued. A case study for local application is presented: GMO-free areas as part of a biosphere park stimulate economically sustainable endogenous development.