Bestimmung des Ferntransports von persistenten organischen Spurenstoffen und der Umweltexposition mittels Modelluntersuchungen

Background, Aim and Scope

Many environmental pollutants are slowly degrading (persistent) and very mobile. They are semivolatile, i.e. they are partitioned between the environmental media of soil, water and air, and undergo long-range transport. The combined action of climate and substance properties determines the distributions and fate of these substances, among them as the persistent organic pollutants (POPs), other pesticides and industrial chemicals.

Main Features

Multicompartment chemistry-transport models are under development in order to study environmental exposure models.

Results

The investigation of transport and fate of some POPs on the global scale has emphasized the significance of historically explicit and geo-referenced simulations for substance distributions, persistence and long-range transport potential. Apart from the substance properties, it is the regional climate which is most important. This was illustrated by studies into the regional cycling of DDT and γ-HCH in selected tropical and extra-tropical regions.

Discussion

The isolation of individual steps of subsequent cycles of emission, transport and deposition (a so-called grasshopper effect) in model experiments shows the potential to elucidate the complex superposition of substance properties and environmental conditions, variable in time and space.

Conclusions

The results suggest that the grasshopper effect enhances the long-range transport potential, but is not required to explain an accumulation in polar regions (at least for γ-HCH).

Perspectives

A number of relevant scientific questions should be addressed by exposure modelling.     

Wissenschaftstheoretische Grundlagen der Beobachtung von GVO-Umweltwirkungen

Goal, Scope and Background

The release of genetically modified organisms (GMOs) may result in ecological impacts to be monitored. This series presents the state-of-art concerning the environmental monitoring of ecological impacts of GMOs. Since this monitoring is conducted by several authorities, the methodical comparability and spatial validity of the monitoring data is crucial. Thus, the respective fundamentals of philosophy of science and of statistics as well as the methodical standardisation form the focus of this article.

Main Features

At first, the monitoring requirements will be described from the viewpoint of ecology. Consequently, the GMO monitoring needs to be integrated into existing programmes. Exposure and effects of GMOs have to be monitored across the hierarchy of ecological organisation. For monitoring to be efficient and sufficient, the design must be founded in terms of philosophy of science and statistics. Hence the fundamentals concerning the verification of hypotheses represent another feature of this article. The data used for the verification of hypotheses must comply with quality criteria. One of these criteria is the spatial and temporal extrapolation of the monitoring results, which is the third feature in this introductory article.

Conclusions

The evaluation of hypotheses on GMO impacts requires the linkage to ecosystems research and environmental monitoring. These both are, in terms of methodology, complementary and of significant technical and scientific value for GMO monitoring.

Recommendations

GMO-monitoring should closely be connected with ecosystems research and environmental monitoring. The levels of ecological organisation should be covered as well as the exposure and the effects of GMOs. The expected GMO exposure and effects should be considered by localising the monitoring sites.

Perspectives

Further articles of this series will deal with network designing, GMO pollen monitoring and extrapolation of site-specific measurements and modelling results.     

Humanarzneimittel im aquatischen Ökosystem

Goal

In the Brandenburg State Office for the Environment an approach to assess the potential risk of drug residues in aquatic ecosystems has been developed based on an investigation of the consumption amounts in 1999 to identify or to exclude a potential environmental risk of important human drugs and further to define priority substances for monitoring programs in Brandenburg in the future.

Method

This assessment approach tested with 60 drug agents is based on an exposure estimation considering the main path for the entry human—waste water—sewage plant—surface water, on a substance specific analysis of effects and on an analysis of the environmental fate as compartment distribution, bioaccumulation and persistence.

Results

In Brandenburg surface waters the drug agent concentration for eight of the considered substances is supposed to be greater than 1 μg/l and for at least 13 of the considered substanoes the PNEC in aquatic ecosystems is assumed to be lower than 1 μg/l. A potential risk for the environment can be seen for the antibiotics Ciprofloxacin-HCl and Clarithromycin, the disinfectants Benzalkonium Chloride, Cocospropylendiaminguaniacetat, Glucoprotamine, Laurylpropylenediamine and Polyvidone-iodine, the sexual hormon Ethinylestradiol, the antidiabetic Metformin-HCl, the antiepileptic Carbamazepine and the lipid regulator Clofibrinic acid on the basis of effects because their PEC:PNEC-relation is about 1 or higher. For further 19 drug agents an environmental risk is to be assumed because of their environmental behaviour without support by ecotoxicological data at present.

Conclusion

Although there is only a small base of valid ecotoxicological data, this risk assessment shows that adverse effects in the aquatic environment by some drug agents cannot be excluded. However, it should be noted that this first assessment gives only a crude orientation. Appropriate test data are necessary to refine the assessment in future.     

Entscheidungsanalytische Simulation formalisierter Umweltmediationsabläufe

Goal and Scope

During the last 10 years environmental mediation has become a popular instrument in Germany to solve environmental conflicts. Environmental mediation is a voluntary negotiation process that is supported by a neutral third person and in which those involved in a conflict jointly search for solutions that are acceptable to all. The simulation of mediation processes can be used to determine the main factors that influence the progression of the conflict and to assess the potential and limits of environmental mediation.

Methods

In this article a decision-theoretical, dynamic model is discussed which is used to simulate a formalized mediation process. It covers, over and above the standard assumptions, the role of emotions. They are the missing link between a state of conflict, and rational, utility maximizing behavior as it is postulated in standard economics.

Results and Conclusions

With this model, the effects of several different parameter sets have been tested. Here, the willingness of the parties to negotiate and to agree to a compromise solution is discussed as well as the role of the integrated emotions which are envy and anger.

Outlook

Due to the large amount of data produced by the model, the evaluation has so far mainly focused on the results of the mediation process. For future research, a more detailed analysis of the simulation runs as well as experiments can help to make the model more realistic.     

Parasitismus und ‘Endokrine Disruption’ in Fischen

Background

Since the 1960s the scientific community has become increasingly aware of the need for integrative and holistic approaches to solve environmental issues. It has not only been recognized that changing environmental conditions can alter toxicological properties of pollutants but also that susceptibility of organisms to man-made chemicals strongly depends on environmental factors. This is especially true with respect to the endocrine control of reproductive processes in many aquatic species including fish, which are mainly influenced by changes in the surrounding environment such as day length, temperature, water flow, etc. Thus, it is astounding that the use of integrative approaches to address the question of the ecotoxicological relevance of the disruption of endocrine and related reproductive functions is rate. As a consequence of this shortcoming, there is increasing demand both among scientists and politicians regarding more holistic approaches in the endocrine disruptor research.

Aim

This contribution aims to critically discuss current strategies and approaches as well as to identify alternative strategies in context with the environmental risk assessment of endocrine disruptors. This will be exemplified using an ecotoxicological study with bream (Abramis brama) that was conducted along a major European river, the Elbe.

Results and Discussion

Local bream (Abramis brama) populations collected along the river Elbe were characterized by different magnitudes and/or types of endocrine alterations. Although there is a relatively extensive data set available regarding its contamination with wide range of chemicals in the Elbe, it has not been possible to conclusively relate the observed endocrine effects to the exposure to individual compounds or mixtures of chemicals. However, during the gross morphological evaluations of the fish it was observed that at some locations a great number of the individuals caught were parasitized with the tapeworm Ligula intestinalis. Furthermore, statistical analysis revealed that a relatively great percentage of the variation of the biological endpoints observed both among individuals and sampling sites could be explained by the occurrence of this parasite. Overall, the findings of these studies indicate that there is a complex interaction not only among the exposure to chemicals and parasitism but also of both of these aspects with the occurrence of biological effects in fish.

Conclusions

The gaps in our current knowledge as well as the findings from the few studies available indicate, the there is a need to revise our current approaches to characterize and evaluate exposure scenarios regarding their potential to cause endocrine disruption in wild organisms. Given the complexity of most environmental exposure scenarios, involving multiple factors including anthropogenic and natural influences and their interactions, I therefore see the urgent need to initiate a discussion on more integrative approaches in this field in favor of true ‘ecotoxicological studies’ that integrate both ecology and toxicology.     

Ökotoxikologische Wirkungen von Teeröl-imprägnierten Holzpfählen

Aim and Scope

This study was aimed at evaluating environmental effects of tar-oil impregnated (tanalized) tree stakes using simple and efficient biotests to obtain results of its ecological impacts during the tar-oil breakdown in the stake.

Results

1. Soil respiration was measured in-situ as an indication of soil microbial activity in two field trials. Soil respiration was measured in a 20 year-old apple orchard at various distances from the tar-oil impregnated tree stakes and also on soil mixed with chippings from pine stakes with tar-oil impregnation of different ages.
2. Cress germination tests were employed to evaluate tar-oil phytotoxicity in a field and laboratory trial. Cress was seeded close to tree stakes in the same 20 year-old apple orchard and germination rates related to tar oil-impregnation. Cress was also seeded in trays in sand mixed with pine chippings from stakes with tar-oil impregnation of different ages.
3. The portion of the carcinogenic benzoapyrene (BaP) ranged between 0.0015% in freshly tar-oil impregnated to 0.4% in tar-oil impregnated 20-year old trees stakes, i.e. irrespective of the overall PAK concentration and its degradation.
4. Kinetic analysis using DIXON plots showed a 50% breakdown of overall PAHs after ca. 2.7 years, i.e. km or Ki values of less than 3 years.

Conclusion

Germination tests of cress and endogenous seeds as well as soil respiration proved sensible indicators of the phytotoxicity and ecotoxicity of tar-oil impregnated tree stakes in fruit orchards. Soil respiration proved particularly sensitive to tar-oil ageing. Its combination with kinetic inhibition models resulted in parameters suitable for the interpretation of results.     

Versuchsanlage zur energetischen Beurteilung von Substraten und Kofermentaten für Biogasanlagen

Goal, Scope and Background

Worldwide energy requirements are constantly increasing. Rising prices and the necessity to secure the future energy supply have led the decision-makers in politics and economy to focus on the more intensive use of their own resources. Before the background of possible climatic effects caused by the use of fossil energies, the use of renewable resources as primary energies, with its narrow C-circulation, have gained in importance, particularly in terms of economic aspects. The production of biogas is of specific interest here. It is a sensible ecological investment and a solid source of income for our agriculture.

Material and Methods

The operator uses a complex biological system in a plant with high investment costs. An economic operation is only possible if the process parameters are optimized and the properties of the substrates and the co-ferments are known. For the important determination of the blogas potential, we present an efficient and robust system, which is easy to handle and low cost, that has been developed by the LHL and LLH at the Eichhof. This procedure enables one to make statements on the implementation dynamics and is also suited to judge the fermentation process depending on the size of particles, as the co-ferments are used in a practice-oriented consistency.

Results

With the described fermentation apparatus you can not only assess the potential development of biogas and methane, but also the process of fermentation. The sum-graphs determined allow one to make conclusions on the implementation dynamics and, thus, on the optimization of the process. The advanced equipment makes it possible to determine the process of fermentation and the gas yield under different retention times and digester loads. The determination of the potential of the biogas and also the evaluation of the continuous fermentation are related to a specific correction factor won from the standard.

Discussion

A prerequisite for economic process management is the knowledge of the attainable gas yield and the fermentation process of substrates and co-ferments. A precise calibration is the quality basis for the results achieved with this method, as is the case with other fermentation tests as well. For the tests, a highly homogeneous substrate, which guarantees a continuous biological activity in the digesters, ought to be used. The possibility of determining optimum retention times and digester loads with this equipment makes costly tests with a full scale reactor unnecessary.

Conclusions

All tests run demonstrated that the fermentation apparatus originally developed to determine the biogas yield is absolutely suited to also assess the impact of different digester loads and retention times.

Recommendations

The problem of the suitability and the potential of different materials, the optimum reactor performance and the combination of different processes of energy generation from renewable but also conventional resources will increaseingly become the focus of laboratory tests. The following subjects have to be taken into account:

- Testing different materials on their suitability

- Evaluation security of common and new co-ferments

- Guidelines for mixtures to optimize reactor performance

- Mixtures of different substrates and co-ferments available to a particular operator (also with the help of simulation models)

- Processing changing quantity proportions of plants won from a rotation of crops altered for energy generation

- Other parameters like pre-fermentation, particle size and fer mentation supplements.

Perspective

These tests with a high practical relevance are supposed to contribute to a reliable method of producing biogas, in order to optimize the yield of gas production, but also to find a calibration of less costly procedures like those involving Near Infrared Spectroscopy (NIRS).     

Die externen Kosten der Stromerzeugung aus erneuerbaren Energien im Vergleich zur fossilen Stromerzeugung

Aim and Background

The supply and use of energy is related to environmental impacts, which cause significant economic damage. As these costs are not reflected in the price of energy, there is little incentive for the polluter to reduce the pressure on the environment. From an economic point of view, environmental resources and services are used beyond the optimal level. The quantification of external costs has been an area of intensive research, in particular within the series of ExternE projects funded by the European Commission. Although external cost estimates have been successfully used to support European environmental legislation, the assessment of external costs is still a matter of significant uncertainties — in particular in areas were potential large environmental impacts are expected. In spite of uncertainty and limited knowledge, policy needs to require guidelines for the evaluation of energy and environmental policy measures.

Main Features

Based on a critical review of the current literature, recommendations for the quantification of external costs from renewable electricity generation in comparison to fossil nuclear technologies are derived.

Results and Discussion

Current electricity market prices do not reflect the total costs of electricity generation. Quantifiable external costs from fossil electricity generation are in the same order as private generation costs. The internalisation of external costs will improve the competitiveness of renewable energy technologies. To avoid market distortion, policy shall implement framing conditions supporting the further internalisation of external costs.

Conclusions

Costs for supporting renewable energy via the German feed-in tariffs are compensated for by external costs avoided.

Perspectives

Fossil and nuclear energies are more expensive than is teflected by economical quantification. In contrast, the costs for renewable energies tell the truth even today. The sooner the external costs are integrated in the pricing, the sooner the relaunch of energy supply will attract interest, also from the economic point of view.     

Overview of principles and implementations to deal with spatial issues in monitoring environmental effects of genetically modified organisms

Background

Sorting and disposal of waste are the last steps in the “lifetime” of a product. If products are contaminated with chemicals assessed to be hazardous for man or environment, waste management has the role of a vacuum cleaner in substance chain management working in two different ways: The hazardous compounds have to be properly separated from potential secondary resources in sorting processes. If this is not possible, those products have to be disposed safely. Starting from the experiences collected with some chemicals banned, the tools used for phasing out these chemicals from the technosphere are studied with respect to their influence on the contamination of the environment.

Results

Even if a dangerous substance has been banned, it is further used in a number of products. In the cases presented here, the substances were banned for further use. In the case of CFCs, the substitutes used have partially also been substituted because of adverse effects. Besides the prohibition of use of hazardous substances, numerous other regulations were issued to reduce unsafe handling and minimize emissions into the environment. It turned out that waste management cannot correct mistakes which already happened “upstream” in the product chain. The control of point sources works quite successfully, whereas today the overwhelming emissions stem from diffuse sources, partially caused by unsafe waste management procedures.

Conclusions

Though there are no complete balances for both groups of compounds serving as examples, some conclusions can be drawn based on the experiences collected. Hazardous compounds may be separated successfully from used products or waste,

• If they are mostly used in industry and not in households,
• if they can be identified as part of certain products,
• if their concentration in these products is rather high,
• if technical problems come up when they contaminate secondary raw materials,
• if there is international support for proper waste management.

     

GIS-basierte Modellierung von Gewässerimmissionen

Goal and Scope

Environmental assessment of aquatic micro pollutants should consider the spatial and temporal variability of emission, transport and transformation. Simulation models coupled with Geographic Information Systems (GIS) provide digital maps of concentration patterns caused by the overlay of multipoint and diffuse emissions and natural attenuation processes in river basins. The paper gives an overview on GIS-based models for river basins and demonstrates the applicability by using some illustrating examples with GREAT-ER.

Main Features

Georeferenced models have several advantages: visualization of concentration patterns, investigation of spatial and temporal concentration profiles, analysis of exceedance of environmental quality standards, embedding in integrated river basin management systems.

Results and Discussion

GIS-based models allow a more realistic assessment. Monitoring programmes should be designed to deliver appropriate measured data for the evaluation and improvement of models.

Recommendation and Perspectives

The combination of digital maps, simulation models and environmental monitoring would provide better approaches for the risk assessment and water quality management of aquatic micro pollutants.     

Untersuchungen zur Eignung von Neutralsalzen als Referenzmittel bei der mikrobiologisch-ökotoxikologischen Bewertung von Pflanzenschutzmitteln im Boden

Goal and Scope

The information value of microbiologicalecotoxicological investigations of pesticides in soil increases if reference compounds with known biocidal effects are included. But those reference compounds used until now often are of remarkable environmental and human toxicity and therefore are difficult to handle. Inorganic neutral salts sometimes were discussed as alternatives, but their suitability needs to be tested before.

Methods

For laboratory experiments some microbial activities in soil were selected whose effects had been proved in several microbiological-ecotoxicological investigations. They include the mineralization of carbon and nitrogen (+ nitrification) as well as the biomass-related parameters dehydrogenase activity and substrate-induced short-term respiration. Several agricultural soils were used to confirm the results.     

Wassergefährdungspotenzial nativer Öle und Fette: Berücksichtigung physikalischer Effekte

Aim and Background

Varying interpretations of the hazard potential of native oils and fats for aquatic ecosystems have led to conflicting international and national regulations. Background is the different consideration of physical effects. This study aimed at compiling published data on behaviour and effects of native oils and fats in water, hereby providing a basis for discussion on adequate classification of these substances.

Results

According to scientific data, physical effects may significantly contribute to the hazard potential of native oils and fats. This is especially important in risk assessment of spills, e.g. in the case of accidents. Basically, these effects are the same in marine and freshwater environments; the latter may even be regarded as worst-case situations with respect to physical effects.

Recommendations

Based on these facts, the German classification of native oils and their derivates as ‘not hazardous to waters’ according e.g. to § 19g of the Water Resources Act and § 4 of the Ordinance of Hazardous Substances should be revised. New criteria need to be incorporated into the evaluation procedure to allow an adequate assessment of these substances regarding physical effects.     

Aktive Stoffe als Handlungsoption gegen die Verschleppung von Organismen durch Seeschiffe?

Background and Scope

The marine shipping lanes have become the most important path for the invasion of foreign aquatic organisms. The increasing global trade results in an increase in the number of marine vessels. Without any protective measures, with every ship carrying foreign organisms the risk of biological invasions will rise.

Results

The International Martime Organization (IMO) of the United Nations developed a convention to reduce the transfer of organisms with ballast water. After the entry-into-force of this convention the fleet of the world has to be equipped with effective ballast water management technology before 2016. This article discusses potential options for action. To comply with the limit values of the ballast water convention, the current state of the art demands the use of active substances. Any decision on the approval of active substances used for ballast water treatment and the environmental impact assessment lies with the IMO. Proposed to day are UV-radiation, active chlorine, active oxygen, the creation of biocides through electrolysis and a change in gases contained in the ballast water. The technologies and the potential risks are presented.

Conclusions

Despite the introduction of an approval procedure by IMO any reliable assessment of the real risks involved in the use of biocides is impossible, as the risk assessment approaches have still to be developed. On the regulatory level, the main focus in data requirements for the risk assessment is on a comprehensive testing of the toxic potential of the biocides proposed. Strategies for the identification and evaluation of the chemical resulting from the treatment of limnic, marine and brackish water are not fully developed. An integrating assessment of risks involved in the introduction of foreign organisms versus the toxic effects of the substances used or created during treatment is still missing.     

Trendanalysen mit Mann-Kendall-Test und Theil-Schätzer

Goal and Scope

An extension for trend analysis with Mann Kendall test and Theil estimator is presented which enables the weighting of data by weight factors.

Methods

It is shown in which way the weighting can effect the outcome of a trend analysis. Weighting is done in relation to the different sample sizes of the data points. A value or an observation derived from many specimens will be considered more reliable than a value derived from only a few specimens and will thus get a higher weighting factor.

Results

When weighting is applied, this will effect the Theil estimator rather than the Mann Kendall test. As a result the regression line is tilted towards those points with higher weights.

Outlook

Future must show whether the extensions presented here and in part 1 prove to be practical for the trend analysis in environmental monitoring or not.     

Humanpharmakawirkstoffe in der Umwelt: Einträge, Vorkommen und der Versuch einer Bestandsaufnahme

Background

The presence of a large spectrum of pharmaceutical agents has been reported for aquatic environments (surface—and groundwater) and other aquatic media (influents and effluents of sewage treatment plants) in Germany and beyond, including their occurrence in drinking water. Considering the large number of pharmaceuticals produced for human use and released into the environment, various authors (Sattelberger 1999, Hanisch et al. 2004, Castiglioni et al. 2006, IWW 2006, Stockholm County Council 2006) tried to compile ‘priority lists’ focusing on those substances with environmental relevance. The following agents are included in all lists: ciprofloxacine, clarythromycine (antibiotics), carbamazepine (anti-epileptic agent), bezafibrate (lipid reducer), clofibric acid (lipid reducer metabolite), ethinylestradiol (sex hormone) and cylophosfamide (cytostatic agent). The agents erythromycine and sulfamethoxazole (antibiotics), ibuprofen, indometacine, propyphenazone (analgesics), atenolol (beta-blocker) and ifosfamide (cytostatic agent) can be found in three of four priority lists.

Results

Pharmaceuticals mainly enter the aquatic environment via effluent water, coming from wastewater treatment plants (including hospital and household sewerage), untreated discharges (e.g, secondary transfer of active agents into ground- and surface waters via sewage sludge application in agriculture and via landfill leachate) and leakages in the municipal sewer network.

Discussion

Potential activities towards a reduced release of pharmaceuticals into the environment should consider primarily the origin of the exposure to allow a separation of drug containing flows already at the source. Following the latter it would be possible to minimize the contamination of spring-, ground- and surface waters which serve as raw water resources for drinking water supply. However, considering the actual water pollution with pharmaceuticals and other substances, ‘end-of pipe’ techniques in the sewage and drinking water treatment are absolutely essential.

Conclusions

Sustainability criteria (e.g. protection of drinking water resources, habitats and biocoenoses, recycling and economizing use of resources) and economic aspects of modern sewage disposal concepts require a useful choice and combination of technical measures as components of centralized and decentralized sewage and drinking water treatment methods. It is though not realistic to cover and eliminate all pharmaceutical agents of environmental relevance equally effective even if a catalogue of potential technical treatment methods is elaborated thoroughly. Therefore, a concentration of efforts on selected drug agents, at least following initially some of the priority lists, is recommended.

Recommendations and Perspectives

The contamination of the water cycle with pharmaceuticals is nevertheless not exclusively to be solved via the application of technical methods. The BMBF (Federal Ministry for Education and Research) funded project start (Management Strategies for Pharmaceuticals in Drinking Water, www.start-project.de) therefore tries by implementation of a transdisciplinary approach to integrate technical-, behavioral-, and agent-orientated management strategies towards a more comprehensive and sustainable problem solution.     

Dioxinähnliche polychlorierte Biphenyle (PCB) in der Umwelt

Goal and Scope

The state of the art on sources, transport and environmental fate, human exposure and toxicological risk assessment of dioxin-like polychlorinated biphenyls (PCB), and non dioxin-like PCB is described and summarized with focus on Germany and neighbouring countries.

Methods

Presentations and discussions of a two-days symposium in Germany are the primary source of information. The significance of dioxin-like PCB is evaluated in relation to polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF). For that purpose, toxicity equivalent concentrations (TEQ) of both groups of contaminants in environmental matrices are compared.

Results and Conclusions

TEQ values of dioxin-like PCB are comparable to those of PCDD/PCDF in many environmental media; in food of animal origin PCB-TEQ is even higher. In most media, the non-ortho substituted PCB 126 has by far the highest contribution to the PCB-TEQ due to its high toxicity equivalency factor of 0.1. Atmospheric (long-range) transport obviously plays the major role for the diffuse PCB contamination of the environment. The transfer atmosphere-plant is apparently the key process for the entrance of dioxin-like PCB into terrestrial food chains.

Recommendation and Perspective

In spite of the decline of environmental contamination with PCB and PCDD/PCDF, a significant part of the general population in Germany and other European countries currently exceeds the tolerable intake of dioxin-like substances. However, also the results of a new toxicological risk assessment of non dioxin-like PCB implicate the need of further reduction of PCB exposure.     

Antibiotika als Umweltkontaminanten — Effekte auf Bodenbakterien

Goal and scope

Among the human and veterinary pharmaceuticals, antibiotics form an important group. Recent research addressed the environmental ‘side effects’ of antibiotics. Evidence for environmental effects of antibiotics has for example been found for the respiratory activity of soil microorganisms. In the present contribution, results of studies on the ecotoxicology of antibiotics that are based on the utilization of carbon substrates in so-called Biolog plates are summarized.

Methods, Results and Conclusions

The method of pollution-induced community tolerance (PICT) takes centre stage. PICT is based on the changes in community composition of environmental communities brought about by a toxicant, which lead to an overall increase in community tolerance to this toxicant. The suitability of such an increase in community tolerance as ecotoxicological endpoint had been the subject of several experiments. It was shown that effect testing of antibiotics requires supplementation of the communities with nutrients, and that the PICT method reveals antibiotic effects with a high specificity. In an application of PICT, effects of three classes of antibacterial compounds were investigated. Dose-response relationships were obtained for all substances, and effect concentrations were partly in the range of expected environmental concentrations. The possible risks of antibiotic use for an increase in the occurrence of antibiotic resistance genes in the environment are also touched upon, including the extent of natural resistance.

Outlook

Due to its specificity, the PICT method has shown to be a suitable ecotoxicological assay. Due to possible effects of tetracyclines on the structure of the soil microbial community, it is advised to use veterinary antibiotics with caution. The risks of an increase in the occurrence of antibiotic resistance in the environment should be investigated in more detail.