The enhancement of photodegradation efficiency using Pt-TiO2 catalyst

The residues from the extraction of lead/zinc (Pb/Zn) ores of most Pb/Zn mines are permanently stored in tailings ponds, which require revegetation to reduce their environmental impact. This can only be done if the main constraints on plant establishment are evaluated. This can readily be done by field and greenhouse studies.

To test this, the properties of different tailings from Lechang Pb/Zn mine located at the north of Guangdong Province in southern China have been studied. Physical and chemical properties including concentrations of metals (Pb, Zn, Cd and Cu) in the tailings and soils collected from different sites have been measured. The results showed that tailings contain low nitrogen (0.016–0.075%), low-organic matter (0.58–1.78%), high salt (3.55–13.85 dS/m), and high total and diethylene–tetramine–pentaacetic acid (DTPA)-extractable metal concentrations (total: 1019–1642 μg g⁻¹ Pb, 3078–6773 μg g⁻¹ Zn, 8–23 μg g⁻¹ Cd, and 85–192 μg g⁻¹ Cu; DTPA-extractable: 59–178 μg g⁻¹ Pb, 21–200 μg g⁻¹ Zn, 0.30–1.5 μg g⁻¹ Cd, and 4.3–12 μg g⁻¹ Cu). Aqueous extracts of tailings/soils (10%, 20% and 30%, w/v) from different sites were prepared for testing their effects on seed germination and root elongation of a vegetable crop Brassica chinensis and a grass species Cynodon dactylon. It was found that root elongation provided a better evaluation of toxicity than seed germination. The ranking of toxicity using root elongation was: high-sulfur tailings>tailingdam>sparsely vegetated tailings>densely vegetated tailings>mountain soil for both plants. This order was consistent with DTPA-extractable Pb contents in the tailings and soils. B. chinensis seedlings were then grown in the mixtures of different proportions of tailings and farm soil for 4 weeks, and the results (dry weights of seedlings) were in line with the root elongation test. All these demonstrated that heavy metal toxicity, especially available Pb, low content of nutrient, and poor physical structure were major constraints on plant establishment and colonization on the Pb/Zn mine tailings.     

Atrazine distribution measured in soil and leachate following infiltration conditions

Atrazine transport through packed 10 cm soil columns representative of the 0-10 cm soil horizon was observed by measuring the atrazine recovery in the total leachate volume, and upper and lower soil layers following infiltration of 7.5 cm water using a mechanical vacuum extractor (MVE). Measured recoveries were analyzed to understand the influence of infiltration rate and delay time on atrazine transport and distribution in the column. Four time periods (0.28, 0.8, 1.8, and 5.5 h) representing very high to moderate infiltration rates (26.8, 9.4, 4.2, and 1.4 cm/h) were used. Replicate soil columns were tested immediately and following a 2-d delay after atrazine application. Results indicate atrazine recovery in leachate was independent of infiltration rate, but significantly lower for infiltration following a 2-d delay. Atrazine distribution in the 0-1 and 9-10 cm soil layers was affected by both infiltration rate and delay. These results are in contrast with previous field and laboratory studies that suggest that atrazine recovery in the leachate increases with increasing infiltration rate. It appears that the difference in atrazine recovery measured using the MVE and other leaching experiments using intact soil cores from this field site and the rain simulation equipment probably illustrates the effect of infiltrating water interacting with the atrazine present on the soil surface. This work suggests that atrazine mobilization from the soil surface is also dependent on interactions of the infiltrating water with the soil surface, in addition to the rate of infiltration through the surface soil.     

Influence of organic acids on the transport of heavy metals in soil

Vegetation historically has been an important part of reclamation of sites contaminated with metals, whether the objective was to stabilize the metals or remove them through phytoremediation. Understanding the impact of organic acids typically found in the rhizosphere would contribute to our knowledge of the impact of plants in contaminated environments. Heavy metal transport in soils in the presence of simple organic acids was assessed in two laboratory studies. In the first study, thin layer chromatography (TLC) was used to investigate Zn, Cd, and Pb movement in a sandy loam soil as affected by soluble organic acids in the rhizosphere. Many of these organic acids enhanced heavy metal movement. For organic acid concentrations of 10mM, citric acid had the highest R(f) values (frontal distance moved by metal divided by frontal distance moved by the solution) for Zn, followed by malic, tartaric, fumaric, and glutaric acids. Citric acid also has the highest R(f) value for Cd movement followed by fumaric acid. Citric acid and tartaric acid enhanced Pb transport to the greatest degree. For most organic acids studied, R(f) values followed the trend Zn>Cd>Pb. Citric acid (10mM) increased R(f) values of Zn and Cd by approximately three times relative to water. In the second study, small soil columns were used to test the impact of simple organic acids on Zn, Cd, and Pb leaching in soils. Citric acid greatly enhanced Zn and Cd movement in soils but had little influence on Pb movement. The Zn and Cd in the effluents from columns treated with 10mM citric acid attained influent metal concentrations by the end of the experiment, but effluent metal concentrations were much less than influent concentrations for citrate <10mM. Exchangeable Zn in the soil columns was about 40% of total Zn, and approximately 80% total Cd was in exchangeable form. Nearly all of the Pb retained by the soil columns was exchangeable.     

Size distribution and anthropogenic sources apportionment of airborne trace metals in Kanazawa, Japan

Aerosol samples were collected from Kanazawa, Japan to examine the size distribution of 12 elements and to identify the major sources of anthropogenic elements. Key emission sources were identified and, concentrations contributed from individual sources were estimated as well. Concentrations of elements V, Ca, Cd, Fe, Ba, Mg, Mn, Pb, Sr, Zn, Co and Cu in aerosols were determined with ICP-MS. The results showed that Ca, Mg, Sr, Mn, Co and Fe were mainly associated with coarse particles (>2.1 μm), primarily from natural sources. In contrast, the elements Zn, Ba, Cd, V, Pb and Cu dominated in fine aerosol particles (<2.1 μm), implying that the anthropogenic origin is the dominant source. Results of the factor analysis on elements with high EF_Crust values (>10) showed that emissions from waste combustion in incinerators, oil combustion (involving waste oil burning and oil combustion in both incinerators and electricity generation plants), as well as coal combustion in electricity generation plants were major contributors of anthropogenic metals in the ambient atmosphere in Kanazawa. Quantitatively estimated sum of mean concentrations of anthropogenic elements from the key sources were in good agreement with the observed values. Results of this study elucidate the need for making pollution control strategy in this area.     

On the dissolution kinetics of humic acid particles. Effect of monocarboxylic acids

The dissolution kinetics of humic acid particles has been studied in batch experiments, and the effects of monocarboxylic (formic, acetic, and propionic) acids are reported. The dissolution rate of the particles is significantly affected by the presence of monocarboxylic acids in the pH range 4–10. At pH 7, for example, propionic acid increases 30 times this dissolution rate. The capacity of increasing the dissolution rate is in the order formic acid < acetic acid < propionic acid, and this dissolving capacity of carboxylics seems to be directly related to their affinity for HA molecules located at the surface of the solid particles. The results indicate that carboxylics and related compounds may affect markedly the mobility and transport of humic substances in the environment.     

Pre-concentration and separation of heavy metal ions by chemically modified waste paper gel

Iminodiacetic acid was immobilized on waste paper by chemical modification in order to develop a new type of adsorption gel for heavy metal ions. Adsorption behavior of the gel was investigated for a number of metal ions, specifically Cu(II), Pb(II), Fe(III), Ni(II), Cd(II), and Co(II) at acidic pH. From batch adsorption tests, the order of selectivity was found to be as follows: Cu(II)  Fe(III) > Pb(II) > Ni(II)  Co(II) > Cd(II). Column tests were carried out for pairs of metal ions to understand the separation and pre-concentration behavior of the gel. It was found that mutual separation of Ni(II) from Co(II) and that of Pb(II) from Cd(II) can be achieved at pH 3. Similarly, selective separation of Cu(II) from Cu(II)–Fe(III) and Cu(II)–Pb(II) mixtures at pH 1.5 and 2, respectively, was observed by using this new adsorption gel. In all cases, almost complete recovery of the adsorbed metal was confirmed by elution tests with HCl.     

施用垃圾堆肥土壤重金属在不同温度和酸雨条件下的淋溶特征

采用淋洗法,研究了垃圾堆肥中重金属在不同温度与模拟酸雨条件下的淋溶特征。结果表明,随着淋洗次数的增加,淋洗液中Cd、Cr、Cu、Ni和Pb的含量都有很大程度的减少。Cd、Cr、Cu和Ni 4种金属在模拟酸雨的情况下淋出量明显高于蒸馏水的情况,增幅都在116%和351%之间,差异显著(P<0.05)或极显著(P<0.01),而酸雨对Pb的淋出影响较小。在酸雨淋洗下,重金属的淋出率在30℃时达到最大,其中Ni随着温度的变化相对较小。而在蒸馏水淋洗下,重金属的淋出率随着温度的变化相对平稳。此外,5种重金属的淋出率明显不同,其中Cr和Ni的淋出率相对较大,Pb最小。     

Application of coupled thermostatted columns in civil engineering and for leaching heavy metals of wastes from foundry sands and mining industry

For many years, the mining industry at Pachuca Hidalgo, Mexico, has produced silver and gold through a cyanide process. Solid wastes (tailings) of this process have been deposited close to centres of population. Many of the metals in these wastes are dispersed via wind and rain, and can be toxic to flora and fauna. Foundry sands are wastes, produced by the automotive industry, the metallurgy industry and others, which are contaminated with many metals such as Fe, Cr, Zn, Pb, Au Ag, Ti, Ge, Co, As, Al, etc. We have previously patented a process for the extraction of toxic and valuable metals from foundry sands using a thermostatted column. The results of this study indicate that the process and the device could be used for removing heavy metals from tailings. In this research both types of waste (foundry sands and tailings) were leached using four coupled thermostatted columns. The presence of heavy metals in the solid wastes was studied using the ICP-AS technique and scanning electron microscopy, and to study the structure we used X-ray diffraction. After leaching we used the solid wastes (without toxic metals) to produce bricks. The mechanical properties of the bricks were assessed against international standards.     

Scanning and transmission electron microscope of suspended lead-rich particles in the air of San Luis Potosi,Mexico

In the city of San Luis Potosi exists an important metallurgical plant and is known that in the adjacent urban zone, there is a high concentration of lead in the air, it is also supposed that most of the particles with lead have an anthropogenic origin because these particles show morphological characteristics and chemical composition very different in comparison with common lead minerals. In this work it was proved that most of the airborne particles with lead present in this urban zone, effectively came from the copper smelter. The airborne particles with lead were compared with particles with lead obtained starting from samples of slag and lead calcine of the copper smelter. To perform the comparative study, these particles were studied with energy dispersive X-ray microanalysis (EDS) in conjunction with scanning electron microscope to obtain chemical composition and associated morphological characteristics. Results suggest that these particles, composed of only one phase, are chemically distinct from any crustal lead mineral. Because of the complexity of the chemical composition of these particles (Pb, S, Cu, As, Fe, Zn, Cd, Sb, O), some of the airborne particles were analyzed by transmission microscopy in order to associate crystalline structure with any particular chemical phase.     

Detection of combustion formed nanoparticles

UV–visible extinction and scattering and two extra situ sampling techniques: atomic force microscopy (AFM) and differential mobility analysis (DMA) are used to follow the evolution of the particles formed in flames. These particle sizing techniques were chosen because of their sensitivity to detect inception particles, which have diameters, d<5 nm, too small to be observed with typical particle measurement instrumentation. The size of the particles determined by AFM and DMA compares well with the size determined by in situ optical measurements, indicating that the interpretation of the UV–visible optical signal is quite good, and strongly showing the presence of d=2–4 nm particles. UV–visible extinction measurements are also used to determine the concentration of d=2–4 nm particles at the exhausts of practical combustion systems. A numerical model, able to reproduce the experimentally observed low coagulation rate of nanoparticles with respect to soot particles, is used to investigate the operating conditions in the combustion chamber and exhaust system for which 2–4 nm particles survive the exhaust or grow to larger sizes. Combustion generated nanoparticles are suspected to affect human and environmental health because of their affinity for water, small size, low rate of coagulation, and large surface area/weight ratio. The ability to isolate nanoparticles from soot particles in hydrosols collected from combustion may be useful for future analysis by a variety of techniques and toxicological assays.     

Distribution,origin, and transformation of metal and metalloid pollution in vegetable fields,irrigation water,and aerosols near a Pb-Zn mine

Pollution of arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), and zinc (Zn) in vegetable fields was investigated near a Pb-Zn mine that has been exploited for over 50 years without a tailing reservoir. A total of 205 water, soil, and aerosol samples were taken and quantified by combined chemical, spectrometric, and mineral analytical methods. The pollution origins were identified by Pb isotopes and the pathways of transformation and transport of the elements and minerals was studied. The data showed that the vegetable fields were seriously polluted by As, Cd, and Pb. Some concentrations in the samples were beyond the regulatory levels and not suitable for agricultural activities. This study revealed that: (1) particulate matter is a major pollution source and an important carrier of mineral particles and pollutants; (2) the elements from the polluted water and soils were strongly correlated with each other; (3) Pb isotope ratios from the samples show that Pb minerals were the major pollution sources in the nearby vegetable fields, and the aerosols were the main carrier of mining pollution; (4) the alkaline, rich-carbonate, and wet conditions in this area promoted the weathering and transformation of galena into the secondary minerals, anglesite and cerussite, which are significant evidence of such processes; (5) the soil and the aerosols are a recycled secondary pollution source for each other when being re-suspended with wind. Highlights ? Mining activities generated heavy metal pollution in fields around a Pb-Zn mine ? The elements from water and soils are strongly correlated ? Anglesite and cerussite are evidence of galena transformation into secondary minerals ? Particulate matter is an important transport carrier of pollution     

Metal mobility during in situ chemical oxidation of TCE by KMnO4

The potential for trace-metal contamination of aquifers as a side effect of In Situ Chemical Oxidation (ISCO) of chlorinated solvent contamination by KMnO(4) is investigated with column experiments. The experiments investigate metal mobility during in situ chemical oxidation of TCE by KMnO(4) under conditions where pH, flow rate, KMnO(4), TCE, and trace-metal concentrations were controlled. During ISCO, the injection of MnO(4) creates oxidizing conditions, and acidity released by the reactions causes a tendency toward low pH in aquifers. In order to evaluate the role of pH buffering on metal mobility, duplicate columns were constructed, one packed with pure silica sand, and one with a mixture of silica sand and calcite. Aqueous solutions of TCE and KMnO(4) (with 1 mg/L Cu, Pb, Zn, Mo, Ni, and Cr(VI)) were allowed to mix at the inlet to the columns. After the completion of the experiments, samples of Mn oxide were removed from the columns and analyzed by analytical scanning and transmission electron microscopy. In order to relate the results of the laboratory experiments to field settings, the analyses of Mn-oxide samples from the lab experiments were compared to samples of Mn oxide collected from a field-scale chemical-oxidation experiment that were also analyzed by analytical electron microscopy as well as time-of-flight secondary-ion mass spectroscopy. The pH ranged from 2.40 in the silica sand column to 6.25 in the calcite-containing column. The data indicate that aqueous Mo, Pb, Cu and Ni concentrations are attenuated almost completely within the columns. In contrast, Zn concentrations are not significantly attenuated and Cr(VI) is transported conservatively. The results indicate that within the range 2.40 to 6.25, metal mobility is not affected by pH. Comparison of analyses of Mn-oxide from the lab and field demonstrate that a variety of metals are sequestered from solution by Mn oxide.     

Leaching variations of heavy metals in chelator-assisted phytoextraction by Zea mays L. exposed to acid rainfall

Chelant-enhanced phytoextraction method has been put forward as an effective soil remediation method, whereas the heavy metal leaching could not be ignored. In this study, a cropping-leaching experiment, using soil columns, was applied to study the metal leaching variations during assisted phytoextraction of Cd- and Pb-polluted soils, using seedlings of Zea mays, applying three different chelators (EDTA, EDDS, and rhamnolipid), and artificial rainfall (acid rainfall or normal rainfall). It showed that artificial rainfall, especially artificial acid rain, after chelator application led to the increase of heavy metals in the leaching solution. EDTA increased both Cd and Pb concentrations in the leaching solution, obviously, whereas EDDS and rhamnolipid increased Cd concentration but not Pb. The amount of Cd and Pb decreased as the leaching solution increased, the patterns as well matched LRMs (linear regression models), with R-square (R ²) higher than 90 and 82% for Cd and Pb, respectively. The maximum cumulative Cd and Pb in the leaching solutions were 18.44 and 16.68%, respectively, which was amended by EDTA and acid rainwater (pH 4.5), and followed by EDDS (pH 4.5), EDDS (pH 6.5), rhamnolipid (0.5 g kg⁻¹ soil, pH 4.5), and rhamnolipid (pH 6.5).

     

Soil contamination in Colombian playgrounds: effects of vehicles,construction, and traffic

The presence of potentially hazardous elements (PHEs) in playground soils is generally associated with anthropogenic sources such as vehicle traffic, industries, construction sites, and biomass burning. Studies indicate that PHEs are harmful to human health and may even be carcinogenic. Therefore, the aim of this study was to evaluate the physicochemical, morphological, and mineralogical properties of soil samples from three public playgrounds located in the cities of Bogota, Medellin, and Barranquilla. Besides, the possible impacts caused by the aerodynamics of particles in Colombian cities were verified. The morphology, composition, and structure of the nanoparticles (NPs) (< 100 nm) present in these soils were evaluated by field emission scanning electron microscopy (FE-SEM) equipped with high-precision field emission (FE) and high-resolution transmission electron microscopy (HR-TEM). Soil samples were predominantly feldspar, quartz, and, to a lesser extent, clay minerals, carbonates, and hematites. The average content of PHEs was anthropogenically enriched in relation to the upper continental crust. As and Sn showed a large spatial variation, indicating the influence of local sources, such as vehicle traffic and industries. There is an inverse relationship between the total concentrations of some elements and their leachable fractions. The accumulation of traffic-derived PHEs has a negative impact on human health and the environment, which is alarming, especially for elements such as Pb, Sb, or As. Therefore, the presence of PHEs should receive greater attention from public health professionals, and limits should be set and exposures controlled. This study includes the construction of a baseline that provides basic information on pollution, its sources, and exposure routes for humans in the vicinity of Colombia’s major cities, characterized by their increasing urbanization and industrialization.

     

Sediment pollution and dynamic in the Mar Piccolo of Taranto (southern Italy): insights from bottom sediment traps and surficial sediments

Major and trace element, PAH, and PCB concentrations were measured in surface sediments and particles from sediment traps collected in the First and Second Basin of the Mar Piccolo (Gulf of Taranto) in two periods (June–July and August–September, 2013). The aim of the study was to evaluate pollution degree, sediment transport and particle redistribution dynamic within the area. Results confirm the higher contamination of sediments from the First Basin observed by previous researches, particularly for Cu, Hg, Pb, total PAHs, and total PCBs. Advective transport from the First to the Second Basin appears to be the leading transfer mechanism of particles and adsorbed contaminants, as evidenced by measured fluxes and statistical analyses of contaminant concentrations in surficial sediments and particles from sediment traps. Long-range selective transports of PAHs and microbial anaerobic degradation processes for PCBs have been also observed. These results are limited to a restricted time window but are consistent with the presence of transport fluxes at the bottom of the water column. This mechanism deserves further investigation and monitoring activities, potentially being the main responsible of pollutant delivering to the less contaminated sectors of the Mar Piccolo.     

Impact of lime-stabilized biosolid application on Cu,Ni, Pb and Zn mobility in an acidic soil

A soil column leaching study was conducted on an acidic soil in order to assess the impact of lime-stabilized biosolid on the mobility of metallic pollutants (Cu, Ni, Pb and Zn). Column leaching experiments were conducted by injecting successively CaCl₂, oxalic acid and ethylenediaminetetraacetic acid (EDTA) solutions through soil and biosolid-amended soil columns. The comparison of leaching curves showed that the transport of metals is mainly related to the dissolved organic carbon, pH and the nature of extractants. Metal mobility in the soil and biosolid-amended soils is higher with EDTA than with CaCl₂ and oxalic acid extractions, indicating that metals are strongly bound to solid-phase components. The single application of lime-stabilized biosolid at a rate ranging from 15 to 30 t/ha tends to decrease the mobility of metals, while repeated applications (2?×?15 t/ha) increase metal leaching from soil. This result highlights the importance of monitoring the movement and concentrations of metals, especially in acid and sandy soils with shallow and smaller water bodies.     

Colloid-facilitated transport of lead in natural discrete fractures

Colloid-facilitated transport of lead (Pb) was explored in a natural chalk fracture with an average equivalent hydraulic aperture of 139 μm. Tracer solution was prepared by adding montmorillonite (100 mg L^?1) and/or humic acid (HA) (10 mg L^?1) to modified artificial rainwater containing dissolved Pb (21.4 mg Pb L^?1), naturally precipitated PbCO₃ particles (16.4 mg Pb L^?1) and LiBr (39.0 mg L^?1). We found that Pb is only mobile when associated with colloids. PbCO₃ particles were not mobile in the fracture. The addition of HA to the montmorillonite suspension increased the suspension's mobility and therefore promoted the colloid-facilitated transport of Pb. The increases in pH and sodium absorption ratio induced by the chalk-tracer solution interactions appeared to increase the dispersion and mobilization of colloids entering the fracture. The dominant colloid-facilitated transport of Pb reported in this study has significant implications for risk assessment of Pb mobility in fractured rocks.     

Combined effects of lanthanum ion and acid rain on growth, photosynthesis and chloroplast ultrastructure in soybean seedlings

Rare earth elements (REEs) have been accumulated in the agricultural environment. Acid rain is a serious environmental issue. In the present work, the effects of lanthanum ion (La³⁺) and acid rain on the growth, photosynthesis and chloroplast ultrastructure in soybean seedlings were investigated using the gas exchange measurements system, chlorophyll fluorometer, transmission electron microscopy and some biochemical techniques. It was found that although the growth and photosynthesis of soybean seedlings treated with the low concentration of La³⁺ was improved, the growth and photosynthesis of soybean seedlings were obviously inhibited in the combined treatment with the low concentration of La³⁺ and acid rain. At the same time, the chloroplast ultrastructure in the cell of soybean seedlings was destroyed. Under the combined treatment with the high concentration of La³⁺ and acid rain, the chloroplast ultrastructure in the cell of soybean seedlings was seriously destroyed, and the growth and of photosynthesis were greatly decreased compared with those of the control, the single treatment with the high concentration of La³⁺ and the single treatment with acid rain, respectively. The degree of decrease and destruction on chloroplast ultrastructure depended on the increases in the concentration of La³⁺ and acid rain (H⁺). In conclusion, the combined pollution of La³⁺ and acid rain obviously destroyed the chloroplast ultrastructure of cell and aggravated the harmful effect of the single La³⁺ and acid rain on soybean seedlings. As a new combined pollutant, the harmful effect of REEs ions and acid rain on plant should be paid attention to.     

Transport and attenuation of metal(loid)s in mine tailings amended with organic carbon: Column experiments

A laboratory-scale column experiment was conducted to evaluate the effect of organic carbon amendments on the mobility of As, Cu, Fe, Mn, Mo, Ni, Pb, Sb, Tl and Zn in mine tailings. Three columns were packed with sulfide- and carbonate-rich tailings, which were amended with a 1:1 (vol.) mixture of peat and spent brewing grain at proportions of 0, 2 and 5vol.%. A simulated input solution characterized by circumneutral pH and elevated concentrations of SO(4) and S(2)O(3) was passed through the columns for 540 days. The input solution contained low concentrations of metal(loid)s during the initial 300 days and elevated concentrations thereafter. Decreases in mass transport of S(2)O(3) were observed in all columns; with increased attenuation observed at 5 vol. % organic carbon content. Removal of Mn, Ni, Cu, Sb and Mo was observed in all columns during the initial 300 days. However, during this time, mobilization of Fe, As, Zn and Pb was observed, with the greatest increases in concentration observed at the higher organic carbon content. During the final 240 days, S(2)O(3) removal was enhanced in columns containing organic carbon, and Fe, Mn, Ni, Tl, As and Sb removal also was observed. This study demonstrates the influence of organic carbon amendments on metal(loid) mobility in mine tailings. Decreases in mass discharge of metal(loid)s may be achieved using this technique; however, site-specific geochemical conditions must be considered before field-scale implementation.     

Photocatalytic activity of the calcined H-titanate nanowires for photocatalytic oxidation of acetone in air

Hydrogen titanate (H-titanate) nanowires were prepared via a hydrothermal reaction of TiO₂ powders (P25) in KOH solutions and then calcined at various temperatures. The phase structure, crystallite size, morphology, specific surface area, and pore structures of the calcined H-titanate nanowires at various temperatures were characterized with field emission scanning electron microscope, X-ray diffraction, transmission electron microscopy and nitrogen adsorption–desorption isotherms, and their photocatalytic activities were evaluated by photocatalytic oxidation of acetone in air. With increasing calcination temperature, the specific surface area and porosity of the calcined samples steadily decreased. At a calcination temperature range of 400–600 °C, the calcined H-titanate nanowires showed higher photocatalytic activity than P25 powders for photocatalytic oxidation of acetone. Especially, at 500 °C, the calcined H-titanate nanowires showed the highest photocatalytic activity, which exceeded that of P25 by a factor of about 1.8 times. This can be attributed to the synergetic effect of larger specific surface area, higher pore volume and the presence of brookite TiO₂. With further increase in the calcination temperature (700–900 °C), the photocatalytic activity of the samples decreased obviously owing to the growth of TiO₂ crystallites.