Indoor air sampling of organophosphate triesters using solid phase extraction (SPE) adsorbents

In this paper we demonstrate the use of SPE cartridges for sampling of organophosphate triesters in indoor air by adsorptive enrichment. The method has been optimised for the sampling and analysis of organophosphate triesters using a 25 mg aminopropyl silica SPE cartridge. The same cartridge is used for the active air sampling as well as for the subsequent extraction and clean-up of the sample. This makes the method fast and eliminates some tedious and time-consuming manual sample handling steps. Sampling and extraction efficiency was high for the investigated organophosphates, and limit of detection was in the range 0.1-0.3 ng m(-3). The method was applied to measurements of organophosphate triesters in two lecture halls and an electronics dismantling facility, and was compared with results from common filter/adsorbent sampling at each site. Analysis was made by GC with selective detection by NPD set in phosphorus mode, and by GC-MS. Thirteen organophosphate triesters (not counting isomers) were detected in the electronic dismantling facility. Chlorinated organophosphate triesters were detected in all locations with concentrations over 1 microg m(-3) in the lecture halls. This kind of adsorptive enrichment using an SPE cartridge could be adjusted to other types of analytes as well.     

Speciation of arsenic in plants by HPLC-HG-AFS: extraction optimisation on CRM materials and application to cultivated samples

A recently developed method for the determination of arsenic species (arsenite, arsenate, monomethylarsonate, MMAA, and dimethylarsinate, DMAA) has been applied to the study of arsenic speciation in plants. This method uses ion-exchange liquid chromatography coupled on-line to atomic fluorescence spectrometry through continuous hydride generation. Various extraction procedures have been studied in detail using three plant certified reference materials. None of the procedures tested revealed fully satisfying results with all kinds of plant samples; microwave assisted extraction with 0.3 mol dm-3 orthophosphoric acid was found to be the most convenient for dealing with terrestrial plants. Species stability appears good. This method was applied to real world cultivated plant parts. Arsenate appears to predominate in soils, roots and leaves; unidentified species (probably arsenosugars) play an important role (60%) in rice fruits. Carrot was found to be the most contaminated edible plant part, containing 1 mg kg-1 essentially as arsenate species. MMAA was detected in all soils and some plant parts especially shallots at low levels, whereas DMAA was found only in one soil sample and in hot pepper leaves. Arsenite is a minor component of all soils; it is also present in some plant parts at low levels. However, no evident relationships were found between As speciation in the various plant parts and much more detailed studies will be necessary to elucidate As behaviour in plants.     

固相微萃取-毛细管气相色谱法快速分析水中酚类化合物

固相微萃取是一种快速、简便、集萃取浓缩进样于一体的样品前处理技术,具有分析时间短、灵敏度高、无需有机溶剂的优点.本工作用固相微萃取富集水中酚类化合物,毛细管气相色谱分离分析,整个分析过程只需45min,检出限可达1.0～10.0μg/L,已用于地面水、海水、工厂废水中酚类化合物含量的测定.     

Multi-residue determination of pharmaceuticals in sludge and sludge enriched soils using pressurized liquid extraction, solid phase extraction and liquid chromatography with tandem mass spectrometry

An analytical method to determine a selection of 27 frequently prescribed and consumed pharmaceuticals in biosolid enriched soils and digested sludges is presented. Using a combination of pressurized liquid extraction, solid phase extraction and liquid chromatography with tandem mass spectrometry, it was possible to detect all analytes in each sample type at the low-sub ng g(-1) level. Solid phase extraction efficiencies were compared for 6 different sorbent types and it was found that Waters Oasis HLB cartridges offered enhanced selectivities with 20 analytes showing final method recoveries > or =60% in both soils and digested sludges. The method was validated for linearity, range, precision and limits of detection in both sample matrices. All analytes were then determined in sludge enriched soils as well as the precursor thermally dried sludge fertilizer produced from a primary wastewater treatment plant. Levels of the antibacterial agent triclosan were found to exceed 20 microg g(-1) in digested sludge and 5 microg g(-1) in thermally dried sludge cake. Significant traces of carbamazepine and warfarin were also detected in the above samples.     

固相微萃取一毛细管气相色谱法快速分析水中有机氯农药

固相微萃取是一种快速、简便、集萃取浓缩进样于一体的样品前处理技术,具有分析时间短、灵敏度高、无需有机溶剂的优点.本工作用固相微萃取富集水中有机氯农药,毛细管气相色谱分离分析,整个分析过程只需30min,检出限可迭0.01至0.1μg/L,已用于降雨、地面水、海洋中有机氯农药含量的测定.     

Speciation and preservation of inorganic arsenic in drinking water sources using EDTA with IC separation and ICP-MS detection

The native distribution of As(III) and As(v) in drinking water supplies can influence the treatment removal strategy. The stability of As(III) and As(v) in iron-rich drinking waters can be affected by the formation of Fe precipitates (Fe oxides and/or hydroxides designated by "FeOOH"). These precipitates (ppts) can form during the transport of the sample to the laboratory for arsenic speciation analysis. The analysis of the ppt indicates considerable loss of the aqueous arsenic species (As(aq)) to the solid phase "FeOOH" ppt. Studies of laboratory reagent water containing both As(III) and Fe(III) indicate that the resulting "FeOOH" ppt contained a mixture of As(III) and As(v) with near quantitative removal of the As(aq) in 18 hr. The corresponding aqueous fraction after filtration through a 0.45 microm filter was composed primarily of As(v). The formation of "FeOOH" ppt and the loss of As(aq) to the ppt can be virtually eliminated by the use of EDTA, which sequesters the FeIII). Reagent water fortified with Fe(III), As(III) and EDTA produced less than a 1 ppb change in the As(III)aq concentration over 16 d. The EDTA treatment was also tested on three well waters with different native As(III )/As(v) ratios. The native distribution of As(III)/As(v) was stabilized over a period of 10 d with a worst case conversion of As(III) to As(v) of 2 ppb over a 30 d period. All well waters not treated with EDTA had dramatic losses (a factor of 2-5) of As(aq) in less than 1 d. These results indicated that EDTA preservation treatment can be used to preserve As(aq) in waters where the predominant species is the reduced form [As(III)] or in waters which the predominant species is the oxidized form [As(v)]. This preliminary investigation of EDTA to preserve As species in Fe-rich waters indicates stability can be achieved for greater than 14 d.     

固相萃取技术在水源地特定项目监测中的应用

采用C18固相萃取(SPE)技术测定水中36种半挥发性有机物(SVOCs),包括硝基苯类、氯苯类、有机氯农药类、有机磷农药类、多环芳烃类共五类有机化合物,用GC-MS分析.研究了有机改性剂对回收率的影响,1L水样加入7ml甲醇对回收率有较好改善.结果表明,平均回收率为51%～118%,相对标准偏差在1.90%～9.79%之间,方法检出限为0.02μg/L～0.32μg/L.该方法适用于监测水源水中多种痕量SVOCs.     

Investigation of sequential and enzymatic extraction of arsenic from drinking water distribution solids using ICP-MS

A sequential extraction approach was utilized to estimate the distribution of arsenite [As(iii)] and arsenate [As(v)] on iron oxide/hydroxide solids obtained from drinking water distribution systems. The arsenic (As) associated with these solids can be segregated into three operationally defined categories (exchangeable, amorphous and crystalline) according to the sequential extraction literature. The exchangeable As, for the six drinking water solids evaluated, was estimated using 10 mM MgCl(2) and 10 mM NaH(2)PO(4) and represented between 5-34% of the total As available from the solid. The amorphously bound As was estimated using 10 mM (NH(4))(2)C(2)O(4) and represented between 57-124% of the As available from the respective solid. Finally, the crystalline bound As was estimated using titanium citrate and this represented less than 1.5% of the As associated with the solids. A synthetic stomach/intestine extraction approach was also applied to the distribution solids. The stomach fluid was found to extract between 0.5-33.3 microg g(-1) As and 120-2,360 microg g(-1) iron (Fe). The As concentrations in the intestine fluid were between 0.02-0.04 microg g(-1) while the Fe concentration ranged from 0.06-0.7 microg g(-1) for the first six drinking water distribution solids. The elevated Fe levels associated with the stomach fluid were found to produce Fe based precipitates when the intestinal treatment was applied. Preliminary observations indicate that most of the aqueous Fe in the stomach fluid is ferric ion and the observed precipitate produced in the intestine fluid is consistent with the decreased solubility of ferric ion at the pH associated with the intestine.     

Quantification of penoxsulam in soil and rice samples by matrix solid phase extraction and liquid-liquid extraction followed by HPLC-UV method

The paper exploits the development of novel, simple and sensitive methodology involving matrix solid phase dispersion (MSPD) and the comparison of MSPD with liquid-liquid extraction (LLE) for the evaluation of residual penoxsulam in soil and rice samples. Extracted samples were analyzed by high-performance liquid chromatography (HPLC) with ultraviolet detector at 230 nm. Both methods were optimized, considering different parameters, and under optimum conditions, the mean recoveries obtained were in the range of 85–104 % for MSPD and 78.8–90.7 % for LLE. Precision values expressed as relative standard deviation (RSD) were ≤10 for MSPD and ≤15 for LLE. Linearity for penoxsulam was in the range of 0.01–20 μg mL^?1 with limits of detection and limits of quantification of 0.01 and 0.03 mg kg^?1, respectively.     

磁性分散固相萃取气相色谱法测定地表水中有机磷化合物

应用磁性分散固相萃取技术对环境水体中有机磷化合物进行萃取测定,并对萃取剂的用量、萃取时间、解吸溶剂、盐度等实验影响因素进行了优化。在优化条件下,有机磷的回收率为80.1%~93.1%,相对标准偏差为4.6%~5.9%,检出限为0.000 2~0.000 4 mg/L。与传统的液液萃取及固相萃取相比,该磁性分散固相萃取方法操作更为简单、迅速,有机溶剂消耗量很少,方法环保。能很好的满足环境水体中有机磷化合物的测定。     

固相微萃取-毛细管气相色谱法快速同步分析水中有机氯及有机磷农药

固相微萃取是一种快速、简便,集萃取浓缩进样于一体的样品前处理技术,具有分析时间短、灵敏度高、无需有机溶剂的优点.用固相微萃取富集水中8种有机氯及7种有机磷农药,毛细管气相色谱ECD检测器分离分析,整个分析过程只需26min,检出限可达0.002～1μg/L,已用于地表水中有机氯及有机磷农药含量的测定.     

Feature extraction using Hough transform for solid waste bin level detection and classification

This paper deals with the solid waste image detection and classification to detect and classify the solid waste bin level. To do so, Hough transform techniques is used for feature extraction to identify the line detection based on image’s gradient field. The feedforward neural network (FFNN) model is used to classify the level content of solid waste based on learning concept. Numbers of training have been performed using FFNN to learn and match the targets of the testing images to compute the sum squared error with the performance goal met. The images for each class are used as input samples for classification. Result from the neural network and the rules decision are used to build the receiver operating characteristic (ROC) graph. Decision graph shows the performance of the system waste system based on area under curve (AUC), WS-class reached 0.9875 for excellent result and WS-grade reached 0.8293 for good result. The system has been successfully designated with the motivation of solid waste bin monitoring system that can applied to a wide variety of local municipal authorities system.     

自制固相微萃取涂层用于自来水中五氯酚的测定

采用石英毛细管作为模具,甲基丙烯酸和乙二醇二甲基丙烯酸酯在石英纤维表面原位聚合得到聚(甲基丙烯酸-乙二醇二甲基丙烯酸酯)作为固相微萃取涂层,并以五氯酚为研究对象,采用顶空SPME-GC-ECD法对该涂层的萃取性能进行评价。使用正交试验优化萃取温度、萃取时间、盐浓度、pH和搅拌速度。在最优条件下,建立了水样中五氯酚的分析方法,方法检出限为1ng/L,线性范围为2～5000ng/L,线性相关系数为0.9999,相对标准偏差(RSD,n=5)为8.9%,加标回收率为110.8%。     

Speciation of inorganic arsenic in coastal seawater from Ionian and Tyrrhenian Seas (Sicily, Italy) using derivative anodic stripping chronopotentiometry

The purpose of this paper was to use derivative anodic stripping chronopotentiometry (dASCP) as a sensitive and accurate technique, to determine the concentrations of dissolved As (III) and As (V) in coastal seawater samples from the Straits of Messina, the Ionian and the Tyrrhenian seas, and to investigate the relationship between the anthropogenic activities on the coastal areas and the concentration of dissolved inorganic arsenic in seawaters. The obtained data indicated that As (V) was the most abundant species, with concentration ranging from 26.7 to 307 nM, whereas As (III) levels were lower than 48 nM in all the samples. In particular, As (III) and As (V) levels significantly decreased from high to low anthropogenic activities zones (p < 0.00001, ANOVA), with the reference samples, from a wildlife reserve, showing the lowest values. Furthermore it was observed that human activities influenced inorganic arsenic speciation, since the zones that received high human input presented the highest As(V)/As (III) ratio.     

固相微萃取-毛细管气相色谱法快速同步分析水中硝基苯类及氯苯类化合物

固相微萃取是一种快速、简便、集萃取浓缩进样于一体的样品前处理技术,具有分析时间短、灵敏度高、无需有机溶剂的优点。文章用固相微萃取富集水中9种硝基苯类及5种氯苯类化合物,毛细管气相色谱ECD检测器分离分析,整个分析过程只需25min,检出限可达0.0002~0.02μg/L,已用于地表水、海水与工厂废水中硝基苯类及氯苯类化合物含量的测定。     

Study of leachability and fractional alteration of arsenic and co-existing elements in stabilized contaminated sludge using a flow-through extraction system

This study investigates the stabilization of As in the contaminated sludge after treatment with MnO(2) or Ca(OH)(2), and the influence of the stabilizing materials on the leachability of the co-existing elements Pb and Zn. By exploiting a continuous-flow assembly facilitating a modified Wenzel's sequential extraction scheme (designed for the fractionation of arsenic), it is possible to ascertain the leachability, mobility and fractional alteration of these elements under stimulated natural (flow-through) leaching conditions. The fractionation data show that more than 80% of As, Pb and Zn in the untreated sludge are bound in the amorphous Fe oxides fraction and residual fraction. The addition of MnO(2) has only an insignificant effect on As fractional transformation, while Ca(OH)(2) caused an increase in As mobility. For Pb, the decrease in leachability was clearly visible. The extractable Pb was reduced by 18% and 40% in stabilized MnO(2) and Ca(OH)(2) sludge samples, respectively. Unlike that of Pb, the mobility of Zn was not affected by the additives used. Their fractional distribution patterns before and after the stabilization process remained the same. The ability to produce detailed leaching profiles for As and other elements (Pb, Zn, Ca, Mn and Fe) meant that elemental associations in individual fractions could be examined. From the MnO(2)-treated sludge, the coincidence of the As, Pb, Zn, Fe, and Mn peaks seems to indicate a close association of these elements in the Fe-oxides-bound fraction. Furthermore, the leaching profiles may be used as evidence of a strong affinity between these elements and added MnO(2).     

On-line solid phase extraction with polyurethane foam: trace level spectrophotometric determination of iron in natural waters and biological materials

This paper reports the development of a simple and accurate on-line procedure for preconcentration and determination of dissolved iron in waters and biological materials using unloaded polyether-type polyurethane foam as solid extractor. In the developed flow injection system, the analyte was preconcentrated from acidic aqueous medium as iron-thiocyanate complex with post-elution with ascorbic acid solution and spectrophotometric measurement with 1,10-phenanthroline as colorimetric reagent. In order to improve the performance of the system several chemical and flow variables were investigated as well as the effect caused by the presence of possible interferents. The method was validated by the analysis of two certified reference materials. Application of the methodology was carried out by the determination of dissolved iron content in eight natural water samples with different characteristics. The results were compared with those obtained by electrothermal atomic absorption spectrometry (ETAAS) and no statistical difference was observed. The detection limit was 0.75 microgram l-1 and the RSD was 1.2% for 2 min preconcentration time. At this condition, a productivity of 20 samples h-1 was achieved. Increasing the preconcentration time up to 3 min, a detection limit of 0.45 microgram l-1, an RSD of 1.5% and an analytical throughput of 15 h-1 were verified.     

Comparison of a matrix solid phase dispersion and a classical extraction method for the determination of chlorinated pesticides in fish muscle

A new multiresidue extraction technique was used to determine incurred chlorinated hydrocarbon pesticide residues in various fish species sampled at 2 locations along the Tensas River in Louisiana. Residue levels of total DDT (combined DDT, DDE, and DDD levels) in fish muscle fillets from paired samples ranged from 0.2 to 3.9 ppm on a wet weight basis. These findings were compared to those of another laboratory that used a different protocol to isolate the residues from the fish muscle fillets. This latter protocol typifies the more complicated, time-consuming protocols used by governmental agencies for screening purposes. Results demonstrated that the new extraction technique reduced analysis time, solvent waste, and cost per sample without affecting the quality of residue detection and measurement.     

Determination of traces of copper and zinc in honeys by the solid phase extraction pre-concentration followed by the flame atomic absorption spectrometry detection

A simple and fast solid phase extraction procedure was developed to pre-concentrate traces of Cu and Zn prior to their determination in honey samples by flame atomic absorption spectrometry. The sample preparation included dissolution of honey samples and the passage (at 20 ml/min) of resulting 10 % m/v solutions (100 ml) through Dowex 50W?×?8-400 resin beds in order to quantitatively retain Cu and Zn and separate them from the glucose and fructose matrix. Enriched Cu and Zn traces were recovered with 5.0 ml of a 3.0 mol/l HCl solution and quantified by flame atomic absorption spectrometry. The procedure proposed was used to analyze sixty nine commercially available and freshly ripened honey samples coming from the Lower Silesia region (Poland). It enabled to measure Cu and Zn within the range of 0.01–1.42 and 0.03–15.38 μg/g, respectively, with precision better than 4 %. Accuracy, assessed on the basis of the recovery test and the comparison of results with those obtained using wet digestion and inductively coupled plasma optical emission spectrometry, was ranged from ?4 % to +6 %. Detection limits of Cu and Zn achieved with this method were 5 and 7 ng/g, respectively.     

Chemical sequential extraction for metal partitioning in environmental solid samples

A comprehensive review of the sequential extraction schemes for metal fractionation in environmental samples (ie., sediment, soil, sewage sludge, fly ash, etc.) is presented. The review contains more than 400 references and covers principally the literature published over the last decade. The use of each reagent involved in these schemes is looked at critically, and guidelines for their selectivity and extraction capacity are given. The operational character of these schemes is emphasised. Topics such as comparability between sequential extraction schemes of widespread use, harmonisation, acceleration, validation, etc. are addressed and future developments outlined.