Chironomid mouthpart deformities as indicator of environmental quality: a case study in Lake Trasimeno (Italy)

The aim of the present study was to monitor mouthpart deformities of Chironomus plumosus (Insecta-Diptera) in Lake Trasimeno (2000-2010) in relation with sediment contamination by heavy metals, which is one of the main causes of deformity induction. In Lake Trasimeno, concentrations of heavy metals in the investigated littoral zone were low, in comparison with those of the central area. By contrast, the incidence of deformities was much higher in the littoral station (2006-2009) than in the central area. In the littoral zone, the deformities progressively decreased and by 2010 reached values similar to those observed in the central area (2000-2002, 2010). This decrease was mainly due to the reduction of severe deformities, thus indicating an environmental quality recovery of this littoral sector. Chemical analysis revealed that the higher incidence of deformities in the littoral zone was not caused by heavy metal contamination, unless they may have contributed to a joint action with other toxicants. The present study on Lake Trasimeno provided additional evidence that chironomid mouthpart deformities can be used in biomonitoring programs to evaluate sediment contamination by toxicants. Since mouthpart deformities may also be induced by compounds not included in routine chemical analyses, they may better reflect sediment quality than chemical analysis alone.     

Collaborative study to improve the quality control of rare earth element determinations in environmental matrices

In order to control the quality of rare earth determinations in environmental matrices, the Standards, Measurements and Testing Programme (formerly Community Bureau of Reference, BCR) of the European Commission has started a project, the final aim of which is to certify four types of matrices (tuna muscle, mussel tissue, aquatic plant and estuarine sediment) for their contents of a range of rare earth elements (Sc, Y and the lanthanides: La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu). The elements U and Th were added to the study. The first part of this project consisted of an interlaboratory study which aimed to test the feasibility of preparation of environmental reference materials and to detect and remove most of the pitfalls observed in rare earth determinations. This paper presents the preparation of the four matrices for the intercomparison study and for the candidate reference material. The main results are presented of the interlaboratory study that was carried out prior to the certification campaign. This collaborative trial is the first attempt ever carried out at this scale to evaluate the state-of-the-art of rare earth determinations in the environment. Its impact on the improvement of chemical measurements will have positive effects on the comparability of data necessary for environmental monitoring.     

Solar plants,environmental degradation and local socioeconomic contexts: A case study in a Mediterranean country

Photovoltaic plants developed on rural land are becoming a common infrastructure in the Mediterranean region and may contribute, at least indirectly, to various forms of environmental degradation including landscape deterioration, land take, soil degradation and loss in traditional cropland and biodiversity. Our study illustrates a procedure estimating (i) the extension of ground-mounted photovoltaic fields at the municipal scale in Italy and (ii) inferring the socioeconomic profile of the Italian municipalities experiencing different expansion rates of ground-mounted photovoltaic fields over the last years (2007-2014). The procedure was based on diachronic information derived from official data sources integrated into a geographical decision support system. Our results indicate that the surface area of ground-mounted photovoltaic fields into rural land grew continuously in Italy between 2007 and 2014 with positive and increasing growth rates observed during 2007-2011 and positive but slightly decreasing growth rates over 2012-2014, as a result of market saturation and policies containing the diffusion of solar plants on greenfields. We found important differences in the density of ground-mounted solar plants between northern and southern Italian municipalities. We identified accessible rural municipalities in southern Italy with intermediate population density and large availability of non-urban land as the most exposed to the diffusion of solar plants on greenfields in the last decade. Our approach is a promising tool to estimate changes in the use of land driven by the expansion of photovoltaic fields into rural land.     

Life cycle assessment as an analytical tool in strategic environmental assessment. Lessons learned from a case study on municipal energy planning in Sweden

Life cycle assessment (LCA) is explored as an analytical tool in strategic environmental assessment (SEA), illustrated by case where a previously developed SEA process was applied to municipal energy planning in Sweden. The process integrated decision-making tools for scenario planning, public participation and environmental assessment. This article describes the use of LCA for environmental assessment in this context, with focus on methodology and practical experiences. While LCA provides a systematic framework for the environmental assessment and a wider systems perspective than what is required in SEA, LCA cannot address all aspects of environmental impact required, and therefore needs to be complemented by other tools. The integration of LCA with tools for public participation and scenario planning posed certain methodological challenges, but provided an innovative approach to designing the scope of the environmental assessment and defining and assessing alternatives.     

Assessment of environmental benefits of flyover construction over signalized junctions: a case study

In the present study, the impact of the flyover construction to curb traffic congestion problem has been assessed in terms of traffic decongestion, time saving, fuel saving and emission reduction. A flyover has also been constructed over four signalized junctions in the main commercial area in Nagpur city, India. It was found that about 35% of the total traffic is diverted to the flyover, which results in a reduction of about 32% in the total emission generation. Travel on the flyover resulted in as much as 60-70% saving in time, compared to the travel on the main road, particularly when all the four signals are found to be in the red phase. The loss of fuel for combustion and the associated cost resulting from waiting for the signal to change are also estimated, and these are found to be significant.     

Power requirements and environmental impact of a pedelec. A case study based on real-life applications

This paper describes the methodologies to appraise the power requests and environmental analysis of an electrically assisted bicycle under real driving conditions, also containing regulations and technical-science-related aspects. For this purpose, in this study, the on-road test program of an electrically assisted bicycle was executed in the urban area of Naples on different test tracks, so a general assessment about its driving behavior under several driving conditions was performed. The power requirements in different typical riding situations were estimated by a procedure based on the experimental kinematic parameters that characterize the driving dynamics collected during the real-life applications. An environmental analysis was also performed, with a methodology that takes into account the environmental assessment of a moped by measuring the experimental moped exhaust emissions of the regulated pollutants. Starting from the results acquired during the different test samples, besides, an assessment of the electric traction offered by this pedelec on the driving comfort was evaluated for different riding situations.     

A case study predicting environmental impacts of urban transport planning in China

Predicting environmental impacts is essential when performing an environmental assessment on urban transport planning. System dynamics (SD) is usually used to solve complex nonlinear problems. In this study, we utilized system dynamics (SD) to evaluate the environmental impacts associated with urban transport planning in Jilin City, China with respect to the local economy, society, transport, the environment and resources. To accomplish this, we generated simulation models comprising interrelated subsystems designed to utilize changes in the economy, society, road construction, changes in the number of vehicles, the capacity of the road network capacity, nitrogen oxides emission, traffic noise, land used for road construction and fuel consumption associated with traffic to estimate dynamic trends in the environmental impacts associated with Jilin's transport planning. Two simulation scenarios were then analyzed comparatively. The results of this study indicated that implementation of Jilin transport planning would improve the current urban traffic conditions and boost the local economy and development while benefiting the environment in Jilin City. In addition, comparative analysis of the two scenarios provided additional information that can be used to aid in scientific decision-making regarding which aspects of the transport planning to implement in Jilin City. This study demonstrates that our application of the SD method, which is referred to as the Strategic Environmental Assessment (SEA), is feasible for use in urban transport planning.     

Towards generalised reference condition models for environmental assessment: a case study on rivers in Atlantic Canada

Evaluation of the ecological status of river sites in Canada is supported by building models using the reference condition approach. However, geography, data scarcity and inter-operability constraints have frustrated attempts to monitor national-scale status and trends. This issue is particularly true in Atlantic Canada, where no ecological assessment system is currently available. Here, we present a reference condition model based on the River Invertebrate Prediction and Classification System approach with regional-scale applicability. To achieve this, we used biological monitoring data collected from wadeable streams across Atlantic Canada together with freely available, nationally consistent geographic information system (GIS) environmental data layers. For the first time, we demonstrated that it is possible to use data generated from different studies, even when collected using different sampling methods, to generate a robust predictive model. This model was successfully generated and tested using GIS-based rather than local habitat variables and showed improved performance when compared to a null model. In addition, ecological quality ratio data derived from the model responded to observed stressors in a test dataset. Implications for future large-scale implementation of river biomonitoring using a standardised approach with global application are presented.     

Preparation of a flood-risk environmental index: case study of eight townships in Changhua County,Taiwan

To evaluate flood-prone areas, correlation analysis of flooding factors for the quantitative evaluation of hazard degree was determined to assist in further disaster prevention management. This study used flood-prone areas in 35 villages over eight townships (Changhua, Huatan, Yuanlin, Xiushui, Puyan, Hemei, Dacun, and Erlin) in Changhua County as research samples. Linear combination was used to evaluate flood-prone environmental indices, and an expert questionnaire was designed by using the analytic hierarchy process and the Delphi method to determine the weights of factors. These factors were then used to calculate the eigenvector of a pairwise comparison matrix to obtain the weights for the risk assessment criteria. Through collection of disaster cases, with particular focus on specifically protected areas where flooding has occurred or is likely to occur, public adaptation and response capabilities were evaluated by using an interview questionnaire that contains the items of perceived disaster risk, resource acquisition capability, adaptation capability, and environment understanding and disaster prevention education. Overlays in a geographic information system were used to analyze the flood-risk degree in villages and to construct a distribution map that contains flood-prone environment indices. The results can assist local governments in understanding the risk degree of various administrative areas to aid them in developing effective mitigation plans.     

Assessment of environmental impact on air quality by cement industry and mitigating measures: a case study

In this study, environmental impact on air quality was evaluated for a typical Cement Industry in Nigeria. The air pollutants in the atmosphere around the cement plant and neighbouring settlements were determined using appropriate sampling techniques. Atmospheric dust and CO₂ were prevalent pollutants during the sampling period; their concentrations were recorded to be in the range of 249–3,745 mg/m³ and 2,440–2,600 mg/m³, respectively. Besides atmospheric dust and CO₂, the air pollutants such as NO _x , SO _x and CO were in trace concentrations, below the safe limits approved by FEPA that are 0.0062–0.093 mg/m³ NO _x , 0.026 mg/m³ SO _x and 114.3 mg/m³ CO, respectively. Some cost-effective mitigating measures were recommended that include the utilisation of readily available and low-cost pozzolans material to produce blended cement, not only could energy efficiency be improved, but carbon dioxide emission could also be minimised during clinker production; and the installation of an advance high-pressure grinding rolls (clinker–roller-press process) to maximise energy efficiency to above what is obtainable from the traditional ball mills and to minimise CO₂ emission from the power plant.     

Small mammals as biomonitors of metal pollution: a case study in Slovenia

The transfer of lead, cadmium, zinc, mercury, copper and molybdenum from soil to the tissues of small mammals inhabiting differently polluted areas in Slovenia was investigated. Metals were determined in soil samples and in the livers of 139 individuals of five small mammal species, collected in 2012 in the vicinity of a former lead smelter, the largest Slovenian thermal power plant, along a main road and in a control area. The area in the vicinity of former lead smelter differs considerably from other study areas. The soil from that area is heavily polluted with Pb and Cd. The mean metal concentrations in the liver, irrespective of species, varied in the following ranges—Pb: 0.40–7.40 mg/kg fw and Cd: 0.27–135 mg/kg fw and reached effect concentrations at which toxic effects can be expected in a significant proportion of the livers of the small mammal specimens (Pb 40 %, Cd 67 %). These findings indicate that the majority of small mammals trapped in the area of the former lead smelter are at risk of toxic effects due to the very high bioaccumulation of Pb and Cd in the organism. On the contrary, Pd and Cd concentrations in the livers of small mammals sampled in the vicinity of the thermal power plant and along the main road were comparable with reference values and considerably lower than effect concentrations. Additionally, the study suggests that Apodemus flavicollis and Myodes glareolus are very suitable biomonitors of metal pollution.     

Modeling the environmental sustainability of timber structures: A case study

A revival in timber buildings and the appreciation of their positive physical and mechanical properties can be explained by the unique environmental credentials of timber products and their versatility. Heightened public awareness of sustainability in the construction sector places timber among the most preferential sustainable materials. There is plenty of previous research on sustainability assessments for complete buildings, although far less on the sustainability assessment of specific parts of the buildings, such as the case of timber structures. The objective of this study is to present an evaluation model, based on MIVES methodology, specifically designed for timber structures, which can be used to enhance the environmental sustainability and to reduce the impacts that are generated, in those areas where it has been awarded a lower score. The application of the model to the largest multi-storey residential timber building in south-western Europe clearly shows that changes to the material, such as its background and environmental certification, generate significant changes to the overall results of the assessment. A sensitivity analysis is then used to verify the analysis of the results and both the validity and the stability of the proposed model.     

Mesozooplankton assemblages and their relationship with environmental variables: a study case in a disturbed bay (Beagle Channel,Argentina)

This study focused on the seasonal and spatial analysis of the mesozooplankton community in a human-impacted subantarctic bay in Argentina and aimed to detect assemblages associated with environmental variability. Mesozooplankton samples and environmental data were obtained in the Ushuaia Bay (UB) seasonally, from August 2004 to June 2005, and spatially, from coastal (more polluted), middle (less influenced) and open sea water (free polluted) sampling stations. Remarkable seasonal changes on the mesozooplankton community were observed. Nitrogenated nutrients, chlorophyll a, salinity and temperature were the prevailing environmental conditions likely associated with the different mesozooplankton assemblages found in the bay. The copepods Eurytemora americana, Acartia tonsa, Podon leuckarti and Nematoda were particularly observed on the northwest coast of the bay, characterized by the highest level of urban pollution, eutrophicated by sewage and freshwater inputs from the Encerrada Bay which is connected to it. The stations situated in the northeast area, mostly influenced by freshwater input from rivers and glacier melting, showed low mesozooplankton abundances and an important contribution of adventitious plankton. The copepods Ctenocalanus citer, Clausocalanus brevipes and Drepanopus forcipatus were mostly observed at the stations located near the Beagle Channel, characterized by open sea and free polluted waters. Our findings suggest that the variations observed in the mesozooplankton assemblages in the UB seem to be modulated by environmental variables associated with the anthropogenic influence, clearly detected on the coast of the bay. Certain opportunistic species such as A. tonsa and E. americana could be postulated as potential bioindicators of water quality in subantarctic coastal ecosystems.     

Bottom-up responses to environmental and social impact assessments: A case study from Guatemala

In this article we take a closer look at resistance to the practice of Environmental Impact Assessment (EIA) in mining and energy projects in Guatemala. Collectivities resisting mining and hydropower projects in Guatemala are increasingly using the evaluations of EIAs conducted by international independent professionals. Reaching out to international experts is facilitated by local communities' engagements in transnational networks bringing together activists, NGOs, scientists, journalists and others. We argue that resistance movements resort to international professionals to challenge the limits imposed on them by the national legislation and institutional arrangements as well as by the way in which EIAs are performed in the country. Further, the engagements in networks that facilitate access to knowledge contribute to strengthen the legitimacy of communities' claims. Challenges to and complaints about EIAs are ways in which affected communities try to reclaim their right to participate in decision-making related to their local environment and the development of their communities. Both complaints about EIAs and the use of transnational networks to attain better participation in decision making processes at local levels, illustrated in this study for Guatemala, are common responses to the advancement of extractive industries and hydropower development across Latin America. The widespread of initiatives to challenge EIAs involving international experts in the region show that EIAs have become a sort of a transnational battleground.     

Monitoring of environmental parameters for CO2 sequestration: a case study of Nagpur City, India

The use of native plants was examined in three rural communities in the semi-arid of the state of Pernambuco, in northeastern Brazil. The techniques employed in the present study combined a number of different techniques of data-gathering, including semi-structured interviews, guided tour, key-informants, and participating observation, and sampling of the vegetation to evaluate the biodiversity of useful plants. A total of 61 woody species were cataloged, mostly used for construction purposes or fuel. Among the species that stood out for their local importance and multiplicity of uses were: Myracrodruon urundeuva (Engl.) Fr. All., Schinopsis brasiliensis Engl., and Anadenanthera colubrina (Vell.) Brenan. The first two species are included in Brazilian lists of threatened species. Arguments are presented for strategies of management and conservation of plant resources in the semi-arid region that seek alternatives to the use of timber species and the development of alternative non-timber resources.     

Classification of alluvial soils according to their potential environmental risk: a case study for Belgian catchments

Alluvial soils may represent important sinks of contaminants as a result of the deposition of contaminated sediments along the river by overbank flooding or after dredging. Because of the erosion of alluvial deposits or the release of contaminants from sediments, alluvial soils can also be a source of contamination. In this paper, a risk assessment for contaminated (alluvial) soils is presented. The approach, mainly based on physico-chemical soil characteristics, single extractions and leaching tests, is illustrated by means of a case study from four Belgian catchments. The extractions and leaching tests that were used have been validated by European testing programs and can provide valuable information for classifying the potential environmental risks of soils. Irrespective of the location, pH, organic carbon content and 'mobilisable' metal concentrations were the most important factors explaining 'mobile' metal concentrations in the alluvial soils. Additionally, the data of the physico-chemical soil characterization, extractions and leaching tests were combined with local and regional factors to classify the alluvial soils in different categories according to their actual and potential risk for the environment.     

Denitrification potential of riparian soils in relation to multiscale spatial environmental factors: a case study of a typical watershed,China

The objective of this study was to test the hypothesis that environmental regulators of riparian zone soil denitrification potential differ according to spatial scale within a watershed; consequently, a second objective was to provide spatial strategies for conserving and restoring the purification function of runoff in riparian ecosystems. The results show that soil denitrification in riparian zones was more heterogeneous at the profile scale than at the cross-section and landscape scales. At the profile scale, biogeochemical factors (including soil total organic carbon, total nitrogen, and nitrate–nitrogen) were the major direct regulators of the spatial distribution of soil denitrification enzyme activity (DEA). At the cross-section scale, factors included distance from river bank and vegetation density, while landscape-scale factors, including topographic index, elevation, and land use types, indirectly regulated the spatial distribution of DEA. At the profile scale, soil DEA was greatest in the upper soil layers. At the cross-section scale, maximum soil DEA occurred in the mid-part of the riparian zone. At the landscape scale, soil DEA showed an increasing trend towards downstream sites, except for those in urbanized areas.     

The value of long-term environmental monitoring programs: an Ohio River case study

As a subset of environmental monitoring, fish sampling programs have been an important part of assessing the potential impacts of water withdrawals and effluent discharges on fish populations for many years. New environmental regulations often require that adverse environmental impacts to fish populations be minimized. Without long-term field data, population evaluations may incorrectly indicate adverse impacts where none exist or no impact where one is likely to occur. Several electric utility companies have funded the Ohio River Ecological Research Program, which has been in existence for over 40 years and consists of fish, habitat, and water quality studies at multiple power plant sites on the mainstem Ohio River. Sampling includes seasonal night-time electrofishing and daytime beach seining at three upstream and three downstream locations near each plant. The long-term nature of the program allows for the establishment of aquatic community indices to support evaluations of technology performance, the collaborative development of compliance metrics, and the assessment of fish population trends. Studies have concluded that the Ohio River fish community has improved in response to better water quality and that power plant fish entrainment and impingement and thermal discharges have had little or no measureable impact. Through collaboration and the use of long-term data, $6.3 million in monitoring costs have been saved during recent fish impingement studies. The ability to access a multiyear fish abundance database, with its associated data on age, growth, and fecundity, improves the quality of such evaluations and reduces the need for extensive field sampling at individual locations.     

On the indiscriminate use of imported emission factors in environmental impact assessment: A case study in Chile

Environmental Impact Assessment (EIA) aims to determine if the environmental effect of an activity or project complies with standards and regulations. A primary component of the environment to evaluate is air and the effect that various activities can have on its quality. To this end, emission factors (EFs), which are empirical coefficients or mathematical relationships, are normally used. The present research critically analyzes the implications and consequences of using imported EFs in environmental impact studies (EISs), taking as case of study the situation in Chile. Among the main results, the widespread use of EFs in EISs in the country and the lack of assessments of their actual applicability stand out. In addition, the official guidelines related to emissions estimation that are used for EIA in the country mostly include EFs derived elsewhere, without considering the recommendations or restrictions that the original sources indicate for their use. Finally, the broad use of default values defined for the Metropolitan Region in Central Chile, is highly questionable for a country that extends north-south along more than 35° of latitude, with wide variability in climate, traffic conditions, population, soil types, etc. Finally, it is very likely that situations similar to those observed in the present work occurs in other countries with young environmental impact assessment systems, and therefore, that the results herein presented should be of general interest and relevance.