In vivo distribution and fractionation of indium in rats after subcutaneous and oral administration of [(114m)In]InAs

Two in vivo experiments were carried out in this study. In the first experiment five rats were given two subcutaneous injections of [(114m)In]InAs. Major sites of accumulation were spleen, liver and kidney. The intracellular distribution of indium was examined by differential centrifugation. The cytoplasmic fraction contained most of the indium activity followed by the mitochondrial fraction. Both outcomes are in close agreement with the results obtained in previous studies. Chromatographic separations on a preparative size exclusion column were carried out. It was shown that indium was mostly bound to high molecular mass compounds in serum and in the cytoplasmic fraction of spleen, liver and kidney. In a second experiment five rats were given four oral doses of [(114m)In]InAs over a short period. Prior to this experiment the in vitro solubility of cold InAs in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) was determined using graphite furnace atomic absorption spectroscopy. In the case of the SGF only 1.3% of an InAs suspension dissolved after 48 hours incubation at 37 degrees C. InAs was not soluble in SIF. Uptake of InAs after oral administration was minimal (<1%). Due to incomplete removal of traces of [(114m)In]InAs from the gastrointestinal tract, it was impossible to calculate accurately the in vivo distribution over the different organs. As the uptake and consequently the activity in the organs were very low, no further chromatographic separations could be carried out. Considering this very low uptake, it can be concluded that InAs will not accumulate in the body after oral exposure.     

京杭大运河(苏北段)底泥中汞的总量与形态的分布研究

对京杭大运河(徐州段)底泥中的18个样品进行研究,分别用冷原子荧光仪和总有机碳测定仪测定,对底泥中的汞的总量和形态进行测定.结果表明,汞在底泥中的含量主要以残渣态存在,可交换态很少,占总合量的0.04%～1.839%,总有机碳的含量与汞的总量分布没有相关性.     

Phosphorous speciation in surface sediments of the Cochin estuary

Sequential chemical extraction using chelating agents were used to study the P dynamics and its bioavailability along the surface sediments of the Cochin estuary (southwest coast of India). Sediments were analyzed for major P species (iron bound P, calcium bound P, acid soluble organic P, alkali soluble organic P and residual organic P), Fe, Ca, total carbon, organic carbon, total nitrogen and total sulfur contents. An abrupt increase in the concentration of dissolved inorganic P with increasing salinity was observed in the study region. Iron-bound P exhibited a distinct seasonal pattern with maximum values in the monsoon season when fresh water condition was prevailed in the estuary. As salinity increased, the percentage of iron-bound P decreased, while that of calcium-bound P and total sedimentary sulfur increased. C/P and N/P ratios were low which indicate that large amounts of organic matter enriched with P tend to accumulate in surface sediments. The high organic P contribution in the sedimentary P pool may indicate high organic matter load with incomplete mineralization, as well as comparatively greater percentage of humic substance and resistant organic compounds. Principal component analysis is employed to find the possible processes influencing the speciation of P in the study region and indicate the following processes: (1) the spatial and seasonal variations of calcium bound P and acid soluble organic P was mainly controlled by sediment texture and organic carbon content, (2) sediment redox conditions control the distribution of iron bound P and (3) the terrigenous input of organic P is a significant processes controlling total P content in surface sediments. The bioavailable P was very high in the surface sediments which on an average accounts for 59 % in the pre-monsoon, 65 % in the monsoon and 53 % in the post-monsoon seasons. The surface sediments act as a potential internal source of P in the Cochin estuary.     

土壤中苯并[a]芘测定的精密度控制指标研究

通过全国多家实验室的大量监测数据,研究分析了土壤中苯并[a]芘测定的精密度控制指标,并与EPA8270D进行了比较,旨在为环境监测工作提供质量控制依据和质量控制指标。研究表明,标准样品的室内相对标准偏差的质量控制范围≤28%,室内相对偏差的质量控制范围≤34%。     

In vivo microspectroscopy monitoring of chromium effects on the photosynthetic and photoreceptive apparatus of Eudorina unicocca and Chlorella kessleri

In microorganisms and plants, chromium (Cr) is not essential for any metabolic process, and can ultimately prove highly deleterious. Due to its widespread industrial use, chromium has become a serious pollutant in diverse environmental settings. The presence of Cr leads to the selection of specific algal populations able to tolerate high levels of Cr compounds. The varying Cr-resistance mechanisms displayed by microorganisms include biosorption, diminished accumulation, precipitation, reduction of Cr(6+) to Cr(3+), and chromate efflux. In this paper we describe the effects of Cr(6+) (the most toxic species) on the photosynthetic and photoreceptive apparatus of two fresh water microalgae, Eudorina unicocca and Chlorella kessleri. We measured the effect of this heavy metal by means of in vivo absorption microspectroscopy of both the thylakoid compartments and the eyespot. The decomposition of the overall absorption spectra in pigment constituents indicates that Cr(6+) effects are very different in the two algae. In E. unicocca the metal induced a complete pheophinitization of the chlorophylls and a modification of the carotenoids present in the eyespot after only 120 h of exposition at a concentration equal or greater than 40 microM, which is the limit for total Cr discharge established by US EPA regulations. In C. kessleri, chromium concentrations a hundred times higher than this limit had no effect on the photosynthetic machinery. The different tolerance level of the two algae is suggested to be due to the different properties of the mucilaginous envelope and cell wall covering, respectively, the colonies of Eudorina and the single cells of Chlorella, which binds chromium cations to a different extent.     

Monitoring of the natural environment by chemical speciation of elements in aerosol and sediment samples

The development of a monitoring network for chemical speciation of elements of aerosol and sediment samples collected at Lake Balaton has been carried out. Sequential leaching procedures for the determination of the distribution of elements in aerosols (3 steps) and sediments (4 steps) were used. These methods were recently successfully applied to describe environmentally mobile and stable fractions of toxic metals. In aerosol matrices the partition of elements was accomplished by particle size and chemical bonding. In sediments the distribution was performed by chemical bonding. The processes are called fractionation of elements. Particular attention was paid to distinguishing between environmentally mobile and environmentally immobile fractions because these represent the two extreme modes by which the metals are bound to solid matrices. The monitoring objectives were to assess pollution effects on man and his environment and to identify any possible cause and effect relationship between pollutant concentrations and health effects. The results of dry and wet deposition rates showed that most of the toxic metals were dissolved in an aqueous phase and the wet deposition played an important role. It has been found that, while the concentration of Cd and Pb in aerosols is low (0.7 and 29 ng m(-3), respectively), environmentally mobile fractions are considerable. Based upon the data it can be concluded that the effect of the anthropogenic sources on the quality of the lake is minor. This has been the first attempt to correlate speciation results between aerosols and sediments.     

Liquid chromatography-hydride generation-atomic absorption spectrometry for the speciation of tin in seafoods

Liquid chromatography with hydride generation atomic absorption spectrometry as the detection system was applied to the separation and determination of inorganic tin, tributyltin, dibutyltin, monobutyltin, diphenyltin and monophenyltin. A reversed phase C18 column and a methanol/water/acetic acid (70:27:3, v/v/v) mixture containing 0.05%(v/v) triethylamine and 0.1%(w/v) tropolone as the mobile phase (isocratic elution) were used. Extraction of organotins from the samples was carried out using methanol containing 0.05%(w/v) tropolone, a process that was repeated twice. The supernatants were shaken with water and dichloromethane in a separating funnel and the organic phase was collected and evaporated to dryness. When the method was applied to the speciation of tin in fresh and canned mussels, no organotins above the detection limits were identified in any of the samples, inorganic tin being the only species detected. The reliability of the procedure was checked by analyzing the total tin content of the samples by electrothermal atomic absorption spectrometry and by speciation of tin in a certified reference material, mussel tissue (CRM 477). The method can be used for environmental monitoring of organotins contaminated samples.     

Levels and speciation of heavy metals in soils of industrial Southern Nigeria

A knowledge of the total content of trace metals is not enoughto fully assess the environmental impact of polluted soils. Forthis reason, the determination of metal species in solution isimportant to evaluate their behaviour in the environment andtheir mobilization capacity. Sequential extraction procedure wasused to speciate five heavy metals (Cd, Pb, Cu, Ni and Zn) fromfour contaminated soils of Southern Nigeria into sixoperationally defined geochemical species: water soluble,enchangeable, carbonates, Fe-Mn oxide, organic and residual.Metal recoveries were within ± 10% of the independentlydetermined total Cd, Pb, Cu, Ni and Zn concentrations. The highest amount of Cd (avg. 30%) in the nonresidual fractionswas found in the exchangeable fraction, while Cu and Zn weresignificantly associated with the organic fraction. Thecarbonate fraction contained on average 14, 18.6, 12.6, 13 and11% and the residual fraction contained on average 47, 18, 33,50 and 25% of Cd, Pb, Cu, Ni and Zn respectively. Assuming thatmobility and bioavailability of these metals are related to thesolubility of the geochemical form of the metals, and that theydecrease in the order of extraction sequence, the apparentmobility and potential bioavailability for these five metals inthe soil were: Pb > Zn > Cu > Ni > Cd. The mobility indexes ofcopper and nickel correlated positively and significantly withthe total content of metals, while mobility indexes of cadmiumand zinc correlated negatively and significantly with the totalcontent of metals.     

北京市大气颗粒物的浓度水平和离子物种的化学形态

用离子色谱法测定了 1 998年 1 1月至 1 999年 2月期间的 2 4个总悬浮颗粒物 (TSP)样品中 NH+ 4、NO- 3、SO2 - 4和Na+ 质量浓度。研究结果表明 ,北京市冬季大气颗粒物中离子物种的化学形态可以分为三种情况 :污染严重时 ,离子物种以 H2 SO4 、NH4 HSO4 、Na NO3为主要存在形态 ,气溶胶酸性强 ;污染轻时 ,离子物种以 (NH4 ) 2 SO4 、Na NO3为主要存在形态 ,气溶胶呈弱酸性 ;中等污染时 ,离子物种以 (NH4 ) 2 SO4 、NH4 HSO4 、Na NO3几种化学形态存在 ,气溶胶呈中等酸性     

Determination and speciation of heavy metals in sediments of the Juru River,Penang, Malaysia

The Juru River flows through largely urbanized areas and is grossly polluted by domestic wastes and discharges from pig farms. Other than carrying highly polluting organic materials, these wastes are also contaminated with heavy metals. To ascertain the extent of heavy metal pollution in the river, total and non-residual concentrations of Cu, Pb, Zn, Mn and Fe in sediment samples collected along the river were determined. The results indicate that both the total and non-residual metal concentrations in sediments can successfully be used to identify heavy metal pollution sources. The speciation of Zn, Mn and Fe in the sediment samples were investigated using a sequential leaching technique which identifies the elements among six operationally defined host fractions: (1) exchangeable, (2) carbonate and surface-associated, (3) easily reducible, (4) moderately reducible, (5) bound to organic matter and sulphides and (6) residual. The results indicate that Zn is mainly associated with the reducible fractions. Zn and Fe found in the moderately reducible fraction are significantly correlated, indicating that iron oxides is the preferred host phase by Zn.     

Arsenic contamination and speciation in surrounding waters of three old cinnabar mines

The impact of arsenic pollution in waters from the surroundings of three abandoned Hg mines in Northern Spain, as well as reaching the Caudal River, was evaluated. For assessing the factors controlling arsenic release, an extensive study based on the physicochemical characterization and multivariate statistical analysis of waters upstream and downstream each mine site was performed. Waters downstream of the La Soterra?a mine present the highest arsenic concentrations, up to 38.8 mg L(-1), coming mainly from the solubilisation of calcium, magnesium and strontium arsenates at a pH close to neutral. Although arsenic concentrations downstream of La Pe?a are markedly lower, these values remain too high, indicating that the encapsulation carried out in this spoil heap is insufficient. In addition, the high water flow in this point involves an extremely high input of arsenic to the surroundings (0.3 g s(-1)). Waters close to tailings from Los Rueldos suffer from acid mine drainage, provoking an important solubilisation of arsenic and heavy metals, a situation which is rapidly softened with distance. The study of arsenic speciation reveals the omnipresence of As(v) in waters from the three mines, whereas in La Pe?a low amounts of As(iii) were also detected. Different preservation methods for As speciation were compared, such as the addition of HCl, EDTA and the storage of samples without any additive, and no alteration of samples in any case up to nine months after the collection was observed. A study of seasonal variations of As and the main parameters affecting its concentration and speciation was completed throughout a year, showing no remarkable dependency with rainfall for any studied variable.     

Chemical speciation in mining affected waters: the case study of Asarel-Medet mine

The inorganic chemical species in Maresh and Luda Yana rivers affected by the Cu– Mo Asarel-Medet mine, Bulgaria were determined during a low-flow and a high-flow period. The mining activities, the weathering and the oxidation processes strongly influenced the physicochemical processes in the whole water system. The main pollution source was a small lake receiving the acid effluents of the mining activities. High levels of SO₄ ^2???, Cu, Mg, Al, Mn and Fe were determined at the mining polluted and affected stations. Cu^2?+? and CuCO₃ ⁰ species (1:1) were present in the reference waters and Cu^2?+? and CuSO₄ ⁰ species (1:1) in the polluted and affected waters; Cu^2?+? species was dominating downstream. Me^2?+? followed by $\rm{MeSO}_{4}^{\kern3pt{0}}$ (Me = Mn, Zn, Cd and Pb), $\rm{PbCO}_{3}^{\kern3pt{0}}$ and $\rm{PbHCO}_{3}^{\kern3pt{+}}$ species as well as $\rm{Fe(OH)}_{2}^{\kern3pt{+}}$ , $\rm{Al(OH)}_{4}^{\kern3pt{-}}$ , $\rm{Al(OH)}_{2}^{\kern3pt{+}}$ , $\rm{Al(OH)}_{3}^{\kern3pt{0}}$ were prevailing in the system. $\rm{MeSO}_{4}^{\kern3pt{+}}$ and $\rm{Me(SO}_{4})_{2}^{\kern3pt{-}}$ (Me = Fe, Al), $\rm{Me(SO}_{4})_{2}^{\kern3pt{2-}}$ (Me = Zn, Cd and Pb), $\rm{Me(SO}_{4})_{3}^{\kern3pt{4-}}$ (Me = Zn, Cd) and $\rm{Cd(SO}_{4})_{4}^{\kern3pt{6-}}$ species polluted and affected waters. The major elements K and Na were mainly Me^?+? species, whereas Ca and Mg were Me^2?+? and $\rm{MeSO}_{4}^{\kern3pt{0}}$ species in different ratios. The concentration of concentration of $\rm{NO}_{2}^{\kern3pt{-}}$ , $\rm{NO}_{3}^{\kern3pt{-}}$ and $\rm{NH}_{4}^{\kern3pt{+}}$ species as well as complex phosphorous species such as H₂ $\rm{PO}_{4}^{\kern3pt{-}}$ , $\rm{FeHPO}_{4}^{\kern3pt{+}}$ , $\rm{HPO}_{4}^{\kern4pt{2-}}$ , $\rm{CaPO}_{4}^{\kern3pt{-}}$ , $\rm{CaHPO}_{4}^{\kern3pt{0}}$ and $\rm{MgHPO}_{4}^{\kern3pt{0}}$ were also calculated. The trace element concentrations decreased downstream due to dilution, sorption processes and precipitation, but the percentage of free metal species, which are more toxic, increased. An exception was iron and aluminum of which the dominant hydroxy colloidal and sulphate species were easily incorporated into the suspended phase.     

Understanding the sustainable consumption of energy resources in global industrial sector: Evidences from 114 countries

The rapid development of industry, which is an energy-intensive sector, may lead to an increased amount of energy consumption. Energy consumption decoupled from economic growth is one of the statuses towards sustainable development. This study conducted a decoupling analysis between industrial energy consumption (IEC) and industrial economic growth (IEG) to identify their relationship. It was found that among the 114 studied countries, there were 32 countries where strong decoupling occurred during the period of 2000 to 2017, while that of others were yet to come. Further, the key factors influencing the IEC of each country are identified based on the factor-related changes over the 17 years. For the 114 countries, the improvement of industrial energy output (IEO) was the most significant driver for IEC, and population also played its role in IEC increment; the reduction of industrial energy intensity (IEI) was the primary inhibitor for IEC, and the decrease of industrial employment rate slightly turned the IEC down over the period. For promoting the decoupling and less energy consumption in the industry, it is suggested to improve the energy efficiency, decelerate the industrial development, or shift the more energy-intensive industrial sectors to less energy-intensive ones, such as services. The study provides a global perspective for IEC reduction with the evidences of 114 countries, and its findings and policy implications provide the status quo and way forward for the countries aiming at reducing their IEC.     

Phosphorus speciation in the marine sediment of Kalpakkam coast,southeast coast of India

A study was carried out at Kalpakkam coast to find out the distribution of various fractions of phosphorus (P) in the marine sediment during pre-northeast monsoon period. Samples were collected from ten locations covering ~80 km² of the inner-shelf region. Sedimentary parameters such as sand, silt, clay, and organic carbon percentage were analyzed in order to find out their relation with various P fractions. The sediment was found to be predominantly sandy in nature with low silt and clay content. Among all the fractions (loosely bound (LoP), calcium bound (CaP), iron bound (FeP), aluminum bound (AlP), and organic (OP)), CaP fraction constituted the largest portion (68.7 %) followed by organic fraction (16.3 %). The bioavailable P fractions ranged from 5 to 44 % of the total P (TP) content. Relatively high LoP content was observed at the offshore locations with comparatively high mud percentage as compared with the near-shore locations. As FeP and AlP concentrations were directly proportional to the amount of fine-grain sediment, the low levels of these fractions found in this coastal area were therefore attributed to the sandy nature of the sediments. The order of abundance of the major forms of P in the surface sediments of Kalpakkam coast was as follows: CaP?>?OP?>?LoP?>?AlP?>?FeP.     

In vivo effects of trivalent and hexavalent chromium on renal and hepatic atpases of a freshwater teleost Anabas scandens

The in vivo toxic effect of trivalent and hexavalent chromium (25 mg/L) on the renal and hepatic tissue ATPases of an edible teleost Anabas scandens was studied. In an exposure span of 30 days Na⁺-K⁺ ATPase activity exhibited a progressive inhibition in the kidney, but marked inhibition in Na⁺-K⁺ ATPase activity was observed in the liver. Mg²⁺ ATPase activity, however, exhibited an elevation on early exposures, with a later inhibition.     

Chromium speciation and fractionation in ground and surface waters in the vicinity of chromite ore processing residue disposal sites

Chromium concentrations of up to 91 mg l(-1) were found by ICP-OES for ground water from nine boreholes at four landfill sites in an area of S.E. Glasgow/S. Lanarkshire where high-lime chromite ore processing residue (COPR) from a local chemical works had been deposited from 1830 to 1968. Surface water concentrations of up to 6.7 mg l(-1) in a local tributary stream fell to 0.11 mg l(-1) in the River Clyde. Two independent techniques of complexation/colorimetry and speciated isotope dilution mass spectrometry (SIDMS) showed that Cr was predominantly (>90%) in hexavalent form (CrVI) as CrO4(2-), as anticipated at the high pH (7.5-12.5) of the sites. Some differences between the implied and directly determined concentrations of dissolved CrIII, however, appeared related to the total organic carbon (TOC) content. This was most significant for the ground water from one borehole that had the highest TOC concentration of 300 mg l(-1) and at which < 3% of Cr was in the form of CrVI. Subsequent ultrafiltration produced significant decreases in Cr concentration with decreasing size fractions, e.g. <0.45 microm, < 100 kDa, <30 kDa and < 1 kDa by the tangential-flow method. As this appeared related more to concentrations of humic substances than of TOC per se, horizontal bed gel electrophoresis of freeze-dried ultrafilter retentates was carried out to further characterise the CrIII-organic complex. This showed for the main Cr-containing fraction, 100 kDa-0.45 microm, that the Cr was associated with a dark brown band characteristic of organic (humic) matter. Comparison of gel electrophoresis and FTIR results for ultrafilter retentates of ground water from this borehole with those for a borehole at another site where CrVI predominated suggested the influence of carboxylate groups, both in reducing CrVI and in forming soluble CrIII-humic complexes. The implications of this for remediation strategies (especially those based on the addition of organic matter) designed to reduce highly mobile and carcinogenic Cr(VI)O4(2-) to the much less harmful CrIII as insoluble Cr(OH)3 are discussed.     

Total concentrations and speciation of heavy metals in soils of the Shenyang Zhangshi Irrigation Area, China

The Shenyang Zhangshi Irrigation Area (SZIA) was used for the spreading of municipal and industrial waste water, which is an economic way of irrigating crops, recycling nutrients and water treatment. Long-term irrigation resulted in a severe metal contamination of soils. To identify the soil phases implicated in retaining the metals, sequential extractions were performed. The most predominant metal was cadmium which was mainly associated with mobile, easily soluble and easily reducible fractions. Copper was mainly associated with the residual, EDTA extractable and moderately reducible fractions. Lead was bound to organic matter and poorly crystalline Fe-oxides. Nickel and zinc were mainly associated with the residual and strongly reducible fractions. Although copper, lead, nickel and zinc concentrations were of minor importance mobile metal concentrations of these metals as well as of cadmium exceeded German trigger values for plant production and plant growth.     

Arsenic concentration and speciation of the marine hyperaccumulator whelk Buccinum undatum collected in coastal waters of Northern Britain

European whelks (Buccinum undatum) have shown to accumulate high levels of arsenic. Since the accumulation process is not well understood it is necessary to gain information about the geographical variability of the arsenic concentration in them. Here we show that the mean arsenic concentrations of the whelks are site specific and vary by a factor of 3.5 in ten different geographical locations. At fishing grounds where whelks exhibited low arsenic concentrations the arsenic concentration increased linearly with size, whereas the whelks with high arsenic levels from a different location showed no correlation. Although the overall arsenic concentration in the whelks differed between 45 and 655 mg kg(-1) d.w., the inorganic arsenic concentration did not exceed 0.4 mg kg(-1) d.w. The main arsenic compound is arsenobetaine, which is widely considered as non-toxic. The exposure to toxic inorganic arsenic when eating whelks cannot be estimated from their size or their total arsenic concentration.     

Metal speciation studies in the aquifer sediments of Semria Ojhapatti,Bhojpur District,Bihar

The pollution of aquifer sediments by heavy metals has assumed serious concern due to their toxicity and accumulative behavior. Changes in environmental conditions can strongly influence the behavior of both essential and toxic elements by altering the forms in which they occur and therefore quantification of the different forms of metal is more meaningful than total metal concentrations. In this study, fractionation of metal ions in aquifer sediments of Semria Ojhapatti area, Bhojpur district, Bihar has been studied to determine the ecotoxic potential of metal ions. The investigations suggest that iron, copper, and arsenic have a tendency to remain associated in the following order residual > reducible > acid-soluble > oxidizable; manganese and zinc have tendency to be associated as residual > acid-soluble > reducible > oxidizable. The risk assessment code reveals that manganese and zinc occur in significant concentration in acid-soluble fraction and therefore comes under the high risk category and can easily enter the food chain. Most of the iron, copper, and arsenic occur as immobile fraction (i.e. residual) followed by its presence in reducible fraction and would pose threat to the water quality due to changing redox conditions. The metal enrichment factor in the study area shows moderate to significant metal enrichment in the aquifer sediments which may pose a real threat in near future. The geo-accumulation index of metals also shows that the metals lie in the range of strongly contaminated (for iron at shallow depths) to moderately contaminated to uncontaminated values.     

A new method for the characterisation and quantitative speciation of base metal smelter stack particulates

Base metal smelters may be a source of particulates containing metals of environmental concern released to the atmosphere. Knowledge of the quantitative chemical speciation of particulate releases from base metal smelters will be of value in smelter emission fingerprinting, site-specific risk assessments, predictions of the behaviour of smelter stack particulates released to the environment and in resolving liability issues related to current and historic releases. Accordingly, we have developed an innovative approach comprising bulk chemical analysis, a leaching procedure, X-ray diffraction analysis and scanning electron microscopy/electron probe microanalysis characterisation in a step-wise apportioning procedure to derive the quantitative speciation of particulate samples from the stacks of three copper smelters designated as A, B and C. For the A smelter stack particulates, the major calculated percentages were 29 CuSO₄, 20 ZnSO₄.H₂O, 13 (Cu_0.94Zn_0.06)₂(AsO₄)(OH), 11 PbSO₄ and four As₂O₃. For the B smelter stack particulates, the primary calculated percentages were 20 ZnSO₄.H₂O, 20 PbSO₄, 12 CuSO₄ and nine As₂O₃. Finally, we calculated that the C smelter stack particulates mostly comprised 34 ZnSO₄.H₂O, 19 (Cu_0.84Zn_0.16)(AsO₃OH), 11 PbSO₄, 10 As₂O₃ and nine Zn₃(AsO₄)₂. Between 56% and 67% by weight of the smelter stack particulates, including the As, was soluble in water. For these and other operations, the data and approach may be useful in estimating metals partitioning among water, soil and sediment, as well as predictions of the effects of the stack particulates released to the environment.