Assessment of heavy metals in some wild edible mushrooms collected from Yunnan Province, China

Eight heavy metals (Cu, Zn, Fe, Mn, Cd, Cr, Ni, and Pb) in 14 different wild-growing edible mushroom species (Coprinus comatus, Voluariella volvacea, Pleurotus nebrodensis, Hypsizigus marmoreus, Hericium erinaceus, Agrocybe aegerita, Lenfinus edodes, Collybia velutipes, Agaricus bisporus, Russula albida, Clitocybe conglobata, Pleurotus eryngii, Lepista sordida, and Pleurotus ostreatus) collected from Yunnan province, China, were determined by inductively coupled plasma-atomic emission spectrometry after microwave digestion. All element concentrations were determined on a dry weight basis. The ranges of element concentrations for copper, zinc, iron, manganese, cadmium, chromium, nickel, and lead were 6.8-31.9, 42.9-94.3, 67.5-843, 13.5-113, 0.06-0.58, 10.7-42.7, 0.76-5.1, and 0.67-12.9 mg/kg, respectively. In general, iron content was higher than other metals in all mushroom species. The levels of zinc, cadmium, and lead in some edible mushroom samples were found to be higher than legal limits. The relative standard deviations were found below 10%. The accuracy of procedure was confirmed by certified reference material.     

Metal Contamination in Urban Soils of Coastal Tuscany (Italy)

Urban soils are often contaminated by metals deriving from human activities. Urban polluted soils can affect human health through direct physical contact or through the food chain. The behaviour of metals is affected by chemical and physical soil properties. Heavy metal concentration was determined in some soils of three medium sized towns of coastal Tuscany, Central Italy. Soil samples were collected in roadsides, urban agricultural soils (allotments), playgrounds and public parks. The analysis included total metal content (Pb, Cu, Zn, Ni, Cd), and sequential extraction. Lead reached the highest levels in the soils and was higher near roads. In urban agricultural soils and in allotments Cu was present in noticeable quantities (300 mg kg⁻¹). The presence of Cu in urban soils seems to be typical of soils used for a long period as agricultural land, especially vineyards in the area covered by this study. Sequential extraction was performed to evaluate the mobility of the metals and to better understand the impact of the anthropogenic activity on urban sites. In the present study principal components analysis (PCA) is employed to describe the characteristics of urban soils.     

Heavy metal content of edible plants collected close to an area of intense mining activity (southern Portugal)

The Neves-Corvo mining complex (MC) situated in southern Portugal exploits one of the most world’s important copper deposits. Agricultural soils surrounding the MC, used by the inhabitants for crop production, contain excessive amounts of As, Cu, Pb, and Zn. Thus, a potential risk to human consumption exists if edible plants grow on these substrata. Arsenic and Pb were not detected in edible samples collected near the MC and 5 km away, but in the leaves—structural or adsorbed onto the surface. In general, Zn was the most mobile element in both contaminated and reference areas as seen by the bioaccumulation factors (BAF). The tolerable upper intake (TUI) values for Cu are a reason of concern, since in 57.1% of the cases, the TUI values are above the recommended upper limit of 5 mg/day, in the case of Ficus carica, Cucurbita pepo, and Phaseolus vulgaris, whereas in 28.6% of the cases, the TUI values are near this limit (C. pepo and Citrus x sinensis). The consumption of such vegetables from these areas must be banned or strongly reduced, since long-term accumulation of Cu can cause a chronic toxicity in humans.     

Soil Contribution to the Elemental Composition of Epiphytic Lichens (Tuscany, Central Italy)

Total concentrations of Al, Ba, Cd, Co, Cr, Cu, Fe, Mn, Mo, Pb, Sr, Ti, V and Zn in the epiphytic lichen Parmelia sulcata and superficial soils from 60 remote sampling sites in Tuscany (central Italy) were determined to evaluate the contribution of soil to the elemental composition of the lichen. The results showed that in the Mediterranean environment, the trace element content of unwashed lichen samples is greatly affected by soil contamination. However, despite the strong correlations between the concentrations of lithogene elements such as Al, Fe and Ti in P. sulcata, lichen levels of these elements were not at all linearly correlated with their concentrations in the soil, suggesting that dust contamination is highly variable and probably dependent on local site characteristics. All methods evaluated to minimize soil contamination indicated Cu, Pb and Zn as elements of atmospheric origin. However, while levels of Pb were similar to those reported for background areas, moderate pollution by Cu and Zn, probably from fertilizers used in agriculture, was revealed. For elements such as Cd and Mo, identified as atmophile, some uncertainty exists due to the fact that they are essential for lichen metabolism and accumulate intracellularly in lichens; they may therefore occur in soluble form in the lichen thallus.     

Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is becoming more widely used for trace elemental analysis in the occupational hygiene field, and consequently new ICP-MS international standard procedures have been promulgated by ASTM International and ISO. However, there is a dearth of interlaboratory performance data for this analytical methodology. In an effort to fill this data void, an interlaboratory evaluation of ICP-MS for determining trace elements in workplace air samples was conducted, towards fulfillment of method validation requirements for international voluntary consensus standard test methods. The study was performed in accordance with applicable statistical procedures for investigating interlaboratory precision. The evaluation was carried out using certified 37-mm diameter mixed-cellulose ester (MCE) filters that were fortified with 21 elements of concern in occupational hygiene. Elements were spiked at levels ranging from 0.025 to 10 μg filter(-1), with three different filter loadings denoted "Low", "Medium" and "High". Participating laboratories were recruited from a pool of over fifty invitees; ultimately twenty laboratories from Europe, North America and Asia submitted results. Triplicates of each certified filter with elemental contents at three different levels, plus media blanks spiked with reagent, were conveyed to each volunteer laboratory. Each participant was also provided a copy of the test method which each participant was asked to follow; spiking levels were unknown to the participants. The laboratories were requested to prepare the filters by one of three sample preparation procedures, i.e., hotplate digestion, microwave digestion or hot block extraction, which were described in the test method. Participants were then asked to analyze aliquots of the prepared samples by ICP-MS, and to report their data in units of μg filter(-1). Most interlaboratory precision estimates were acceptable for medium- and high-level spikes (RSD <25%), but generally yielded greater uncertainties than were anticipated at the outset of the study.     

Evaluation of optimal conditions for determination of low selenium content in shellfish samples collected at Todos os Santos Bay,Bahia, Brazil using HG-AFS

This work proposes a procedure for the determination of total selenium content in shellfish after digestion of samples in block using cold finger system and detection using atomic fluorescent spectrometry coupled hydride generation (HG AFS). The optimal conditions for HG such as effect and volume of prereduction KBr 10 % (m/v) (1.0 and 2.0 ml) and concentration of hydrochloric acid (3.0 and 6.0 mol L^?1) were evaluated. The best results were obtained using 3 mL of HCl (6 mol L^?1) and 1 mL of KBr 10 % (m/v), followed by 30 min of prereduction for the volume of 1 mL of the digested sample. The precision and accuracy were assessed by the analysis of the Certified Reference Material NIST 1566b. Under the optimized conditions, the detection and quantification limits were 6.06 and 21.21 μg kg^?1, respectively. The developed method was applied to samples of shellfish (oysters, clams, and mussels) collected at Todos os Santos Bay, Bahia, Brazil. Selenium concentrations ranged from 0.23?±?0.02 to 3.70?±?0.27 mg kg^?1 for Mytella guyanensis and Anomalocardia brasiliana, respectively. The developed method proved to be accurate, precise, cheap, fast, and could be used for monitoring Se in shellfish samples.     

Relations between sulphate,ammonia, nitrate,acidity and trace element concentrations in tree bark in The Netherlands

Bark flakes were sampled in a biomonitoring survey throughout The Netherlands. Tree species used were oak (65 samples) and non-oak (58 samples) (poplar, elm, willow). Bark elemental analysis was carried out for As, Br, Ca, Cd, Ce, Co, Cr, Cs, Fe, Hg, K, La, Na, Ni, Pb, Rb, Sb, Sc, Se, Sm, Th, and Zn. Furthermore, bark acidity, SO₄, NH₄ and NO₃ were determined. Further variables introduced into the data-set were DIST (closest distance to sea water) and the dummy variably OAK (tree species).Straightforward multivariate correlation analysis was performed to check the effects on bark metal retention of the non-metal pollutants SO₄, NH₄ and NO₃, and of bark acidity. The OAK variable served to identify species-specific metal and non-metal pollutant behaviour. The DIST variable was used to visualize geography(source)-related variations in bark metal and non-metal pollutant concentrations, and to account for the non-random distribution of OAK and non-OAK tree species.The results indicate that the non-oak and oak bark samples may be combined to form 123 samples containing data-set for As, Br, Cd, Ce, Co, Fe, La, Na, Sc, Sm, Th, Zn, NH₄, NO₄, SO₄ and acidity, but not for Rb, Cs, Se, K, Ni, Pb and Sb (species-specific) and for Ca and Hg (H⁺-dependent). In the presented data-set, bark sulphate, ammonia and nitrate could not be shown to significantly affect bark metal retention.     

Mercury and trace elements in cloud water and precipitation collected on Mt. Mansfield,Vermont

The lack of high quality measurements of Hg and trace elements in cloud and fog water led to the design of a new collector for clean sequential sampling of cloud and fog water. Cloud water was collected during nine non-precipitating cloud events on Mt. Mansfield, VT in the northeastern USA between August 1 and October 31, 1998. Sequential samples were collected during six of these events. Mercury cloud water concentrations ranged from 7.5 to 71.8 ng l(-1), with a mean of 24.8 ng l(-1). Liquid water content explained about 60% of the variability in Hg cloud concentrations. Highest Hg cloud water concentrations were found to be associated with transport from the Mid-Atlantic and Ohio River Valley, and lowest concentrations with transport from the north of Mt. Mansfield out of Canada. Twenty-nine event precipitation samples were collected during the ten-week cloud sampling period near the base of Mt. Mansfield as part of a long-term deposition study. The Hg concentrations of cloud water were similar to, but higher on average (median of 12.5 ng l(-1)) than Hg precipitation concentrations (median of 10.5 ng l(-1)). Cloud and precipitation samples were analyzed for fifteen trace elements including Mg, Cu, Zn, As, Cd and Pb by ICP-MS. Mean concentrations were higher in cloud water than precipitation for elements with predominately anthropogenic, but not crustal origin in samples from the same source region. One possible explanation is greater in-cloud scavenging of crustal elements in precipitating than non-precipitating clouds, and greater below-cloud scavenging of crustal than anthropogenic aerosols.     

The determination and distribution of Zn in surface water samples collected in the northeast Atlantic Ocean

Dissolved Zn concentrations were determined in surface water samples collected on-line along transects in the eastern North Atlantic in spring (March 1998). Two frontal zones could be identified in the research area by a change in salinity, temperature and nutrient concentrations. One zone was identified at 42 degrees N, separating the North Atlantic central water (NACW) and the Atlantic surface water (ASW) from each other, and another one crossing the continental slope at 12 degrees and 8 degrees E, respectively. Variability in Zn concentrations was observed near these zones, not only as a result of a change of water mass, but also due to external Zn sources. Surface Zn concentrations were 0.5-1 nM and 2 nM in the NACW and ASW, respectively, increasing to 4 nM over the continental shelf and finally 5-6 nM in the English Channel. Contributions of Zn derived from shelf sediments appear to be the major source for the enriched surface values in the continental zone.     

Plants as indicators of urban air pollution (ozone and trace elements) in Pisa, Italy

A biennial integrated survey, based on the use of vascular plants for the bioindication of the effects of tropospheric ozone, was performed in the area of Pisa (Tuscany, Central Italy). It also investigated the distribution of selected trace elements in plants and the data were compared with those obtained from the use of passive samplers, automatic analysers of ozone and lichen biodiversity. Photochemically produced ozone proved to be present during the warm season, with maximum hourly means surpassing 100 ppb: the use of supersensitive tobacco Bel-W3 confirmed the value of detailed, cost-effective, monitoring surveys. Trials with clover clones demonstrate that sensitive plants undergo severe biomass reduction in the current ozone regime. The mean NC-S (clover clone sensitive to ozone):NC-R (resistant) biomass ratio ranged from 0.7 (in 1999) to 0.5 (in 2000). The economic impact of these reductions deserves attention. The data obtained using passive ozone samplers exceeded those obtained using an automatic analyser. The mapping of epiphytic lichen biodiversity was not related to the geographical ozone distribution as can be seen from the tobacco's response. Lettuce plants grown under standardized conditions were used positively as bioaccumulators of trace elements: Pb was abundantly recovered, but a large portion of this element was removed by washing.     

Microbial activities and trace element contents in an urban soil

Soil biological properties are influenced by trace metals. The main sources of these pollutants in the urban areas are industrial plants, power stations, domestic heating systems and motor vehicles. The aim of this work was to evaluate, in relation to distance from urban roads, soil trace metal concentrations (Pb, Cu, Cr, Cd and V) and their influence on C-microbial biomass as well as on soil respiration and enzyme activities (phosphatase glucosidase, galactosidase, xylanase, cellulase, trealase, protease and invertase). The samplings were carried out at four sites, along a route that goes from Giannone Street to Passionisti Street, two heavily travelled roads at two different times of the year (spring and autumn). Heavy metal contents and microbial activities were highest at the sites near the roads. The highest values of microbial activities were found in the inner site; here, on the contrary, the lowest concentrations of heavy metals were measured. Significant and negative correlations were found between microbial activity and heavy metal contents.     

Evaluation of trace element contents of some herbal plants and spices retailed in Kayseri,Turkey

The trace element contents of seven kinds of herbal plants and spice samples retailed in local markets in Kayseri-Turkey were determined by flame atomic absorption spectrometry after digestion with HNO₃/H₂O₂ mixture. The concentration ranges for the studied elements were found as 6.0–15.2, 0–32.2, 80.0–324.8, 8.1–386.3, and 13.1–36.2 μg/g for copper, nickel, iron, manganese, and zinc, respectively. The levels of cobalt, lead, and chromium ions in all the investigated samples were found to be below the detection limit of flame atomic absorption spectrometry. The results found in the present work were compared with values in the literature.     

Assessment of elemental distribution and trace element contamination in surficial wetland sediments, Southern Tibetan Plateau

In order to analyze and evaluate different trace metals on surface water of the Changjiang River, concentrations of dissolved trace metals (Cu, Ni, Fe, Co, Sc, Al, Zn, Pb, Cd, Se, As, Cr, and Hg), major elements(Ca and Mg), and nutrient(NO $_{3}^{-})$ were measured. Samples were taken at 76 positions along Changjiang River in flood and dry seasons during 2007?C2008. Spatial distributions identified two main large zones mainly influenced by mineral erosion (sites 1?C22) and anthropogenic action (sites 23?C76), respectively. Principal component analysis (PCA) and hierarchical cluster analysis were used to identify the variance distinguishing the origin of water. Four significant components were extracted by PCA, explaining 74.91% of total variable. Cu, Ni, Fe, Co, Sc, Al, Ca, and Mg were mainly associated with the weathering and erosion of various rocks and minerals, while an anthropogenic source was identified for Cd and As. Although erosion was one source of Pb and Zn, they were also input by atmospheric deposition and industrial pollutions. NO $_{3}^{-}$ and Se were mainly associated with agriculture activities. However, Hg and Cr showed different sources. CA confirmed and completed the results obtained by PCA, classifying the data into two large groups representing different areas. Group 1 referred to the upper reaches which represented samples mainly corresponding to natural background areas. Group 2 referred to the middle and lower reaches including samples under anthropogenic influence. Meanwhile, group 2 was subdivided into three new groups, representing agricultural, industrial, and various artificial pollution sources, respectively.     

Presence of aflatoxin M<Subscript>1</Subscript> in raw,reconstituted, and powdered milk samples collected in Algeria

Aflatoxins are potent toxic metabolites produced by Aspergillus spp. Aflatoxin M₁ (AFM1) is a metabolite of aflatoxin B₁ that can be present in milk, and it is a public health concern. There is scarce information on the incidence of aflatoxin M₁ contamination in milk consumed in Algeria. The presence of AFM1 was investigated in raw milk samples collected between February and October 2011 from 11 dairy farms representative of Algerian production conditions and that were located around Constantine city. Reconstituted and powdered milk samples were purchased from local supermarkets. The analysis was performed by liquid chromatography-fluorescence detection after immunoaffinity purification. AFM1 was detected in 5 out of 47 samples (11 %) at levels ranging from 9 to 103 ng/L, with one sample exceeding the limit of 50 ng/L set by European regulations. Traces of AFM1 (less than 8 ng/L) were also found in 11 other samples. The incidence of AFM1 contamination was higher in imported powdered milk (29 %) than in raw milk (5 %). Although the concentration of AFM1 in contaminated samples was low, the relatively considerable prevalence found in this exploratory study justifies more detailed and continuous monitoring to reduce consumers’ exposure to AFM1.     

An assessment of selected trace elements in intertidal surface sediments collected from the Peninsular Malaysia

Concentrations of 11 trace elements (V, Cr, Co, Ni, Cu, Zn, As, Ag, Cd, Pb, and U) were determined in the intertidal surface sediments of Peninsular Malaysia. The average trace element concentrations are ranked as follows: Zn>V>As>Cr>Pb>Cu>Ni>Co>U>g>Cd. Interim Sediment Quality Guidelines (ISQGs) employed in present study are the Australia and New Zealand joint guideline (ANZECC/ARMCANZ), and the Hong Kong authorities. From the pooled data, none of these trace elements have the average concentration above the ISQG-high values. However, As and Ag average concentrations were over the ISQG-low values. Some elements were found to have the average concentration above the ISQG-high and/or ISQG-low in certain locations, including Kampung Pasir Putih (JPP), Lumut Port (ALP), Kuala Perai (PKP), Port Dickson (NPD), and others. The lowest and highest concentrations in a specific sampling location and maritime area varied among the elements, variations that were greatly affected by natural and anthropogenic activities in a given area. For each trace element, there were various levels of concentration among the sampling locations and maritime areas. These patterns indicated pollutant sources of an element for each area perhaps derived from nearby areas and did not widely distributed to other locations. It is necessary for Malaysia to develop an ISQG for effective quick screening and evaluation of the coastal environment of Peninsular Malaysia.     

Lettuce plants as bioaccumulators of trace elements in a community of central Italy

A survey, based on the use of vascular plants to describe the distribution of selected elements (21 in total) was performed in 11 sites in the area of Castelfiorentino (Tuscany, Central Italy) differing for land use, from urban to industrial and rural areas. Lettuce plants grown under standardized conditions were positively used as biodeposimeters of airborne trace elements. Washing was found to be highly significant in reducing concentrations of many elements in the samples, suggesting a general surface contamination of leaves. The typical crustal element Al showed good correlations with Co, Fe, Li and V; on the contrary, Zn and Cd were intercorrelated and showed no connection with crustal indicators. Lead was still a relevant environmental presence, as the experiments were carried out before the ban of leaded gasoline. Source apportionment by factor analysis put in evidence a major contribution of crustal materials, followed by man-related activities; a minor role was ascertained for marine aerosol. A comparison was made between analytical data of lettuce plants grown in our experimental sites and a bulk of commercial lettuce purchased at a local supermarket. It should be stressed how Cu concentrations of commercial material were significantly higher than those found in our plants; this is likely caused by phytosanitary treatments.     

Assessment of heavy metals in water samples and tissues of edible fish species from Awassa and Koka Rift Valley Lakes, Ethiopia

The Ethiopian Rift Valley Lakes host populations of edible fish species including Oreochromis niloticus, Labeobarbus intermedius and Clarias gariepinus, which are harvested also in other tropical countries. We investigated the occurrence of six heavy metals in tissues of these fish species as well as in the waters of Lake Koka and Lake Awassa. Both lakes are affected by industrial effluents in their catchments, making them ideal study sites. Mercury concentrations were very low in the water samples, but concentrations in the fish samples were relatively high, suggesting a particularly high bioaccumulation tendency as compared with the other investigated metals. Mercury was preferentially accumulated in the fish liver or muscle. It was the only metal with species-specific accumulation with highest levels found in the predatory species L. intermedius. Lower mercury concentrations in O. niloticus could be attributed to the lower trophic level, whereas mercury values in the predatory C. gariepinus were unexpectedly low. This probably relates to the high growth rate of this species resulting in biodilution of mercury. Accumulation of lead, selenium, chromium, arsenic and cadmium did not differ between species, indicating that these elements are not biomagnified in the food chain. Values of cadmium, selenium and arsenic were highest in fish livers, while lead and chromium levels were highest in the gills, which could be related to the uptake pathway. A significant impact of the industrial discharges on the occurrence of metals in the lakes could not be detected, and the respective concentrations in fish do not pose a public health hazard.     

An assessment of tree health and trace element accumulation near a coal-fired generating station, Manitoba, Canada

A forest health assessment was performed in stands dominated by bur oak and trembling aspen to study the potential effects of airborne emissions from a 132 MW coal-fired station. Forty-two stands were sampled within a 16-km radius of the station for both foliar stress symptoms and trace element toxicology. The concentrations of tracer elements (As, Ba, Sr, and V) in the leaf litter were not spatially congruent with airborne emission deposition models (except Ba, which showed elevated levels immediately SE of the station), nor were they at phytotoxic levels. Elemental concentrations were significantly related to soil parameters including organic matter and texture. No patterns were found in forest health along directional or distance gradients from the generating station. Trembling aspen stands demonstrated little decline in general, but three of the 19 bur oak plots, all located on thin sandy soils developed on calcareous till, demonstrated branch dieback. In addition to poor soil conditions, two of these sites also had high water tables, and exhibited tree mortality. The bur oak decline did not appear to be related to emissions from the station, but is suspected to be a result of poor site quality, with urban development as a confounding factor.     

Environmental assessment of trace element bioaccumulation in sipunculan from seagrass and wetland sediments

This study is the first measurement of trace elements in sipunculan and their surrounding sediments. The bioaccumulation characteristics of arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), mercury (Hg), and zinc (Zn) were analyzed and compared in two sipunculan species, Sipuncula nudus and Siphonosoma vastum, which were collected from seagrass beds and wetlands in Taiwan. The sipunculan and sediment samples were analyzed using an inductively coupled plasma mass spectrometer. Both sipunculan in the wetlands and seagrass beds had a high Cu bioaccumulation mechanism. Multivariate analysis, principle component analysis, and partial least squares for discriminant analysis of trace element levels and bioaccumulation factors were used to distinguish the element distributions that corresponded to the two habitats (seagrass beds and wetlands). Different levels of certain trace elements in these two sipunculan species may result not only from the environmental factors of various habitats but also from the accumulation characteristics of various species. The As, Cd, Cr, Cu, Hg, and Zn concentrations were markedly lower in sipunculan than in other invertebrates from the adjacent polluted regions. The public health issues regarding the consumption of sipunculan are also discussed.     

Partitioning between soluble and insoluble fractions of major and trace elements in size-classified airborne particulate matter collected in Tokyo

Airborne particulate matter (APM) is a major air pollutant, and the effect on human health of fine APM (PM2.5) deposited deep inside the lungs has recently become a serious concern. Moreover, soluble constituents may leach from APM, and intensify some health disorders. To identify the soluble chemical constituents of APM, size-classified APM was sampled in central Tokyo, and the elemental compositions of the water-soluble, acid-soluble and insoluble fractions were investigated. The extraction procedure was validated by calculating the mass balance of soluble and insoluble fractions of a standard APM reference material (NIST SRM 1648). Among the major elements, Fe and Ti in APM of all size classes and K in coarse APM were distributed primarily in the insoluble fraction and were inferred to be present as oxides or silicates, whereas Na and Mg in all size classes and K in fine APM were primarily in the water-soluble fraction and were inferred to be have originated mainly from sea salt. Among the trace elements, Zn and Cd in the fine APM (d < 2 microm) had large enrichment factors, indicating an anthropogenic origin, and were distributed primarily in the water-soluble fraction. When fine anthropogenic APM enters into the lungs, leached toxic elements, such as Cd, may adversely affect health. The higher the bonding energy of the monoxide molecule of the element was, the higher its distribution ratio was in the water-soluble fraction. Therefore, many metallic elements in APM were inferred to be present as oxygen-bonded compounds.