Study of heat exposure in the work environment in Jeddah

The present work was conducted to define the magnitude of the problem of heat exposure in Jeddah and the role of both the climatic and the industrial factors on the total heat load. Indoor heat exposure was studied in an industrial complex of 5 plants for cables' manufacturing. Outdoor heat exposure was studied in shaded and unshaded operations in Jeddah Islamic Port (JIP). The heat exposure parameters, including air temperature (Ta), wet bulb temperature (Tw), and globe temperature (Tg), as well as the wet bulb globe temperature (WBGT) heat stress index, the relative humidity and the air velocity, were assessed at representative locations. Results of the study indicated that:

Assessment of airborne fungal spores in different industrial working environments and their importance as health hazards to workers

A survey to assess the occurrence of airborne fungal spores in three different industries, dairies, carpentries and greenhouses, was carried out. The results revealed considerable fungal pollution in the environments of the industries sampled. Noteworthy was the occurrence of fungal genera frequently implicated in allergic and non-allergic diseases, or well known for the production of mycotoxins in foods or characterized by a marked degradative activity on different substrata. Penicillium, Candida, Mucor and Geotrichum were the most common genera identified in the dairies; Penicillium, Cladosporium, yeasts, Trichoderma and Rhizopus occurred more frequently in the carpentries; Cladosporium, Alternaria, Penicillium and Stemphilium were prevailing in the greenhouse.The results of our survey support the idea that, due to their high incidence and variety, fungal spores may represent a potential health hazard in working environments, where their concentration can be affected by many operations and handling.     

Evaluation and assessment of environmental protection alternatives for the Jeddah cement company plant

An environmental impact assessment is conducted by utilizing monitoring, meteorological, and physical modeling data. This information serves as input to a decision analysis of the environmental protection alternatives for the cement plant in Jeddah, Saudi Arabia. Utility theory provides the methodology underlying the Evaluation and Sensivity Analysis Program (ESAP) with which the alternatives are evaluated. Recommendation include: (1) installation of electrostatic precipitators of at least 99% efficiency, (2) institution of a 1.6 km nonresidential zone given the present 60 m chimneys, and (3) substitution of low sulphur fuel for the crude oil now consumed. By illustration this study suggests the general relevance of the ESAP program to environmental assessment and management.     

Reduction of dissolved organic matter in terms of DOC, UV-254, SUVA and THMFP in industrial estate wastewater treated by stabilization ponds

The aim of this research was to monitor the influent and effluent water quality of the aeration, facultative and oxidation water treatment ponds of an industrial estate. This industrial estate, the largest in northern Thailand, has proposed to utilization of reclaimed treated wastewater in their raw water supply so as to cope with the yearly water shortage during the dry season. Water samples were collected four times from four sampling points and evaluated for their dissolved organic matter (DOM) content in terms of dissolved organic carbon (DOC), ultraviolet light absorbance at 254 nm (UV-254), specific ultraviolet absorption (SUVA), trihalomethane formation potential (THMFP) and trihalomethane (THM) species. Average values of DOC, UV-254, SUVA and THMFP in the influent wastewater of 12.9 mg L⁻¹, 0.165 cm⁻¹, 1.29 L mg⁻¹m⁻¹ and 1.24 mg L⁻¹, respectively, were observed. The aeration ponds produced the best results: a 54% reduction of DOC, a 33% reduction of UV-254, and a 57% reduction of THMFP. However, SUVA in the aeration pond effluent showed a moderate increase. The facultative ponds and oxidation ponds did not take part in the reduction of DOC, UV-254, SUVA and THMFP. Average DOC, UV-254, SUVA and THMFP value of the treated wastewater were 5.8 mg L⁻¹, 0.107 cm⁻¹, 1.85 L mg⁻¹m⁻¹ and 468 μg L⁻¹, respectively. Chloroform, at 72.6% of total THMFP, was found to be the predominant THM species.     

Unique phenotypes in the sperm of the earthworm Eudrilus eugeniae for assessing radiation hazards

The earthworm, Eudrilus eugeniae is a segmented worm. It has two pairs of testes whose cells are highly proliferative. It was found that the earthworm, which is irradiated with X-ray, shows the following phenotypic changes in its sperm: fragmented acrosome in the head, break in the tail, and the appearance of zigzag sperm tail. Sperm morphology can be used as a tool to study radiation hazards in local areas. These three phenotypes were not observed in the sperm of worms exposed to different concentration of toxic chemicals such as sodium arsenate, lead acetate, and mercuric chloride. In contrast, exposure of worms to ethidium bromide caused fragmented acrosome in the head of their sperm cells.     

北京工业废水和城市污水中有机氯农药残留分析

建立了基于HLB固相萃取柱和气相色谱-电子捕获(GC-ECD)测定水体中有机氯农药的方法,并对方法的回收率、灵敏度进行了评价,同时分析了北京市七类典型污染点源50个采样点位有机氯农药的浓度,检测到的有机氯农药包括γ-六六六、β-六六六、4,4’-滴滴涕、α-六六六、δ-六六六、硫丹Ⅰ、4,4’-滴滴伊、艾氏剂和异狄氏剂,它们的检出率分别为90%、60%、50%、46%、26%、8%、6%、2%和2%。主要有机氯农药污染残留为γ-六六六、β-六六六和4,4’-滴滴涕。检出有机氯农药浓度范围是0.20~76.40ng/L。方法对有机氯农药的回收率达到60.93%~141.50%,方法检测限为0.27~2.90ng/L。     

工业锅炉烟气的生成与控制研究

详细分述了工业锅炉烟气各组成成分的生成机理 ,针对其产生原因 ,提出降低污染物生成量的措施 ,阐明了脱硫和除尘技术。在环保呼声日渐高涨的今天 ,为城镇中在用燃煤锅炉的继续使用提供了理论、实践依据     

Mutagenicity assessment of contaminated soil in the vicinity of industrial area

In the industrial area of Chinhat, Lucknow (India) wastewater coming from pesticide manufacturing and other industries is used to irrigate the agricultural crops. This practice has been polluting the soil and pollutants might reach the food chain. Gas chromatographic analysis revealed the presence of certain organochlorine pesticides in soil samples. Samples were extracted using different solvents, i.e., hexane, acetonitrile, methanol, chloroform, and acetone (all were HPLC-grade, SRL, India). Soil extracts were assayed for mutagenicity using Ames Salmonella/mammalian microsome test. Mutagenicity was observed in the test samples and TA98 was the most responsive strain for all the soil extracts (irrigated with wastewater) in terms of mutagenic index in the presence (+S9) and absence (−S9) of metabolic activation. In terms of slope (m) of linear dose–response curve for the most responsive strain TA98 exhibited highest sensitivity against the soil extracts in the presence and absence of S9 fraction. Hexane-extracted soil sample (wastewater) exhibited maximum mutagenicity in terms of net revertants per gram of soil in the presence and absence of S9 mix as compared to the other soil extracts. Groundwater-irrigated soil extracts displayed low level of mutagenicity as compared to wastewater-irrigated soil. The soil is accumulating a large number of pollutants due to wastewater irrigation and this practice of accumulation has an adverse impact on soil health.     

未确知测度模型在城市环境空气质量评价中的应用

基于环境空气的信息不确定性特点,运用未确知数学理论,建立了城市环境空气质量评价的未确知测度模型。根据未确知测度的大小,确定样本所属的质量级别及样本间的优劣排序。以唐山市为例,运用所建模型对其环境空气质量状况进行了评价。研究表明,未确知测度模型对于多指标的城市空气质量评价,理论上是可行的,结果是可信的。     

Emission of mercury to the atmosphere from industrial sources in Poland

The emission factors of mercury and calculation of annual emission into the atmosphere from different industrial sources in Poland are presented. The emission factors in turn depend on mercury concentration in raw materials, as well as on the character of a technological process. The combustion of hard coal and lignite was found to be the major emission source of mercury into the atmosphere.     

Assessment of the potential hazards of nitrate contamination in surface and groundwater in a heavily fertilized and intensively cultivated district of India

We made an inventory of nitrate (NO3-N) enrichment in surface and groundwater systems in the Hooghly district of India owing to intensive farming with high fertilizer doses as a function of quantity of fertilizers use, soil characteristics, types of crop grown, depth of groundwater sampling and also N-load in soil profiles. Water samples were collected from different sources at 412 odd sites spread over in 17 blocks of the district along with representative soil profiles. On average, the study area had high clay and NO3-N in soil profiles with an increasing and decreasing trends along depth, respectively. The NO3-N content both in surface and groundwater varied from 0.01 microg mL(-1) to 4.56 microg mL(-1), being well below the threshold limit of 10 microg mL(-1) fixed by WHO for drinking purpose. The content decreased with increasing depth of wells (r = -0.39**) and clay content of soil profiles (r = -0.31**). It, however, increased with increasing rate of fertilizer application (r = 0.72**), NO3-N load in soil profiles (r = 0.85**) and was higher in areas where shallow--rather than deep-rooted crops are grown. Results indicated even under fairly high quantity of fertilizer use, groundwater of the study area is safe for drinking purpose.     

Appraisal of the groundwater balance components from multi-remote sensing datasets in a semi-arid region

Semi-arid regions across the globe are fronting water crises, signaling a challenge to ensure future water security. Given the high inter-seasonal rainfall variability and unrestrained groundwater extraction, the precise quantification of groundwater flow components in an aquifer system is a priority. To address this challenge, we used high-resolution remote sensing (RS) data (Landsat and IRS) and GIS modeling (SEBAL, ArcCN) to spatially quantify major groundwater balance (GWB) components, viz., evapotranspiration (ET), rainfall recharge (R), surface runoff (Q), groundwater extraction (PG), irrigation return flow (IRF), and ultimately changes in groundwater storage (ΔS) in a small semi-arid crystalline representative watershed. Results show that a total of ~?230 mm of groundwater is extracted during 2008–2009, creating a negative impact on the groundwater resource, which is further enhanced by limited recharge and high ET. A decrease of approximately 65 mm in groundwater storage is observed in a single hydrological year, and given a very low specific yield, this decrease will introduce large water level decline. The study establishes that declining groundwater level in the watershed is a direct result of over-extraction, and owing to this scenario, efficient irrigation and land use policies are suggested as potential approaches to minimize extraction specifically in the dry season. Our methodology provides a systematic assessment of vital GWB components at a high spatial resolution and an insight on various sustainable mitigation methods. This methodology is useful in the planning and management of groundwater resources, particularly in water-stressed areas.     

污染物排放与巴州产业经济发展关系研究

本文以"十三五"环境统计数据及巴音郭楞蒙古自治州统计年鉴为数据源分析了巴州污染源时空变化及污染物排放强度,总结出污染物排放主要受社会经济生产、能源消耗、产业发展及环境保护政策等综合因素影响,并提出了建议以期政策实施促进巴州环境经济可持续发展.     

Metal binding in soil cores and sediments in the vicinity of a dammed agricultural and industrial watershed

The environment is witnessing a downgrade caused by the amelioration of the industrial and agricultural sectors, namely, soil and sediment compartments. For those reasons, a comparative study was done between soil cores and sediments taken from two locations in the Qaraaoun reservoir, Lebanon. The soil cores were partitioned into several layers. Each layer was analyzed for several physicochemical parameters, such as functional groups, particle size distribution, ζ-potential, texture, pH, electric conductivity, total dissolved solids, organic matter, cation exchange capacity, active and total calcareous, available sodium and potassium, and metal content (cadmium, copper, and lead). The metal content of each site was linked to soil composition and characteristics. The two sites showed distinguishable characteristics for features such as organic matter, pH, mineral fraction, calcareous, and metal content. The samples taken toward the south site (Q1), though contain lower organic matter than the other but are more calcareous, showed higher metal content in comparison to the other site (Q2) (average metal content of Q1 > Q2; for Cd 3.8?>?1.8 mg/kg, Cu 28.6?>?21.9 mg/kg, Pb 26.7?>?19 mg/kg). However, the metal content in this study did not correlate as much to the organic matter; rather, it was influenced by the location of the samples with respect to the dam, the reservoir’s hydrodynamics, the calcareous nature of the soil, and the variation of the industrial and agricultural influence on each site.     

Seasonal variation of different microorganisms with nickel and cadmium in the industrial wastewater and agricultural soils

Wastewater and soil samples were collected from the industrial area of Ghaziabad City, India from January 2005 to December 2007 and were analyzed for the presence of heavy metals by atomic absorption spectrophotometry. Test samples revealed high levels of Fe, Cr, Cu, Ni, Zn, and Cd as 967.03, 34.63, 27.97, 19.7, 16.70, and 3.20 mg/L of wastewater, respectively. The concentrations of inorganic minerals were higher in the soil samples irrigated with wastewater. Total coliforms were found to be maximum (1,133 × 10⁴ most probable number per 100 mL) during spring and summer followed by winter and postmonsoon in the wastewater samples. The microbial count in soil as well as in wastewater decreases as the metal concentration increases. The concentration 200 μg/mL of nickel and cadmium inhibits majority of the population, while, at some points, it inhibits 100% of the population. The exponential decay model for microbial count at the increasing metal concentrations indicate that asymbiotic N₂ fixers were best fitted to the model. In all the seasons, the order of decline in terms of exponential decay of the population of different microbial groups in soil was asymbiotic N₂ fixers > actinomycetes > fungi > aerobic heterotrophic bacteria. The different microbial groups that have different values of slope in different seasons indicate that the resistant population of microorganisms was variable with seasons.     

Evaluation of the respicon as a personal inhalable sampler in industrial environments

The Respicon has been introduced as a sampler for health related measurements of airborne contaminants at workplaces. The instrument is aimed at simultaneous collection of three health related aerosol fractions: (a) the coarser inhalable fraction, defining the aerosol fraction that may enter the nose and mouth during breathing; (b) the intermediate thoracic fraction, defining the fraction that may penetrate beyond the larynx and so reach the lung; and (c) the finer respirable fraction, defining the fraction that may penetrate to gas exchange region of the lung. The instrument has a number of features attractive to occupational hygienists: in addition to providing the three aerosol fractions simultaneously, it is light and compact enough to be used as a personal sampler. yet can be a tripod mounted for area sampling, it can provide samples not only for gravimetric analysis but also microscopic and chemical analyses; and it is also available in a photometric direct-reading version. The instrument has previously been evaluated as an area sampler and, in this mode of operation, has shown reasonable accuracy in collecting respirable, thoracic and inhalable particles, the latter up to particle diameters of ca. 80 microm. Except for some scattered unpublished data there exist no systematic investigations in the Respicon's performance when used as a personal sampler in the industrial environment. In this paper, we will report on a study of side by side comparison of the Respicon with the IOM inhalable sampler, regarded as a reference instrument for the inhalable fraction. The main study was performed at six different workplaces in a nickel refinery. Statistical analysis of the gravimetrically-determined concentration data reveals consistently lower aerosol exposure values for the Respicon as compared to the IOM sampler. The data for the nickel workplaces are compared with findings from other studies. The results are interpreted in the light of the overall results and the possibility of introducing a correction factor is discussed.     

Health hazard assessment in an industrial town with the help of GRAM-GIS

Unplanned industrialization and urbanization are causing health hazard mainly in developing countries. It is essential to assess the magnitude of future hazard in an industrial town. The geographical information system is a special type of tool evolved to analyse geographic data for efficient planning. In India large-scale industrialization started after independence. New industrial towns have been established and Durgapur in West Bengal is one of them. In this study an indigenously developed GIS package GRAM has been used to assess air quality in Durgapur town. Using GIS, interpolated maps have been prepared showing the distribution of five pollutants, i.e. carbon monoxide, total oxidant, nitrogen-oxide, sulfur-dioxide and suspended particulate matter. The maps have been used to find the pollutant standard index of the area. The final map shows that the PSI index is high and ranges between the unhealthy to very unhealthy category. This map has been combined with a present landuse pattern. There are three pockets of extremely poor air quality zones which generally match with industrial units. Areas around these units are the potential zones of health hazard. Large numbers of patients admitted in hospitals here suffer from obstructive diseases. Most of them belong to the working age group. This may indicate that the main work force is exposed to the health hazard due to industrial pollution.     

Levels and speciation of heavy metals in soils of industrial Southern Nigeria

A knowledge of the total content of trace metals is not enoughto fully assess the environmental impact of polluted soils. Forthis reason, the determination of metal species in solution isimportant to evaluate their behaviour in the environment andtheir mobilization capacity. Sequential extraction procedure wasused to speciate five heavy metals (Cd, Pb, Cu, Ni and Zn) fromfour contaminated soils of Southern Nigeria into sixoperationally defined geochemical species: water soluble,enchangeable, carbonates, Fe-Mn oxide, organic and residual.Metal recoveries were within ± 10% of the independentlydetermined total Cd, Pb, Cu, Ni and Zn concentrations. The highest amount of Cd (avg. 30%) in the nonresidual fractionswas found in the exchangeable fraction, while Cu and Zn weresignificantly associated with the organic fraction. Thecarbonate fraction contained on average 14, 18.6, 12.6, 13 and11% and the residual fraction contained on average 47, 18, 33,50 and 25% of Cd, Pb, Cu, Ni and Zn respectively. Assuming thatmobility and bioavailability of these metals are related to thesolubility of the geochemical form of the metals, and that theydecrease in the order of extraction sequence, the apparentmobility and potential bioavailability for these five metals inthe soil were: Pb > Zn > Cu > Ni > Cd. The mobility indexes ofcopper and nickel correlated positively and significantly withthe total content of metals, while mobility indexes of cadmiumand zinc correlated negatively and significantly with the totalcontent of metals.     

Assessment of the quality of stormwater from an industrial park in central Taiwan

The purposes of this study were to assess the quality of rainstorm runoffs from an industrial park developed to accommodate general industries in Taiwan and to investigate the possible contributors of pollutants in the runoffs. Rainstorm runoffs from this industrial park were found to contain COD and TSS with average event mean concentrations of two events of 2,202.6 ± 1,356 and 784.7 ± 409 mg/l, respectively. The pollution level of these runoffs was found to be tens of times higher than that which may be contributed by accumulation of pollutants in top soils. Other possible sources of the pollutants were those accumulated in rainwater discharge channels and those which overflow from individual pre-treatment plants within the industrial lots. The assessment results are useful in devising the best management practices for the stormwater discharges. The heavy loadings suggest that installations of additional runoff pollution control practices at different zones are necessary at this and similar industrial parks.