Toughening of Polyvinyl Alcohol Hydrogel Through Co-Crosslinking and its Wastewater Treatment Performance by Immobilizing with Microorganism

In order to improve the hydraulic impact resistance of the polyvinyl alcohol (PVA) hydrogel as microorganism immobilization carrier and meet the requirements of long-time aeration of sewage treatment, the toughening PVA hydrogel beads were prepared by co-crosslinking with polyoxypropylene triol (PPG) through the boric acid (H₃BO₃)-chemical crosslinking method. It was found that PPG could increase the consumption of H₃BO₃, participated and accelerated the crosslinking reaction of PVA, and the pore size of the surface layer and core layer of the hydrogel beads can be controlled. With increasing PPG content, the shear storage modulus (G’) and the effective network density (ν_e) increased first, reached maximum in presence of 2 wt% PPG, and decreased afterwards. A relatively low content of PPG could promote the formation of relatively uniform and dense network structure in PVA hydrogel, resulting in an improvement of the mechanical property and long-term hydraulic stability of the gel beads. By addition of PPG, the capillary water absorption capacity of PVA hydrogel can be enhanced and the high permeability can be kept well. When applying in waste water treatment, the value of the oxygen uptake rate (OUR) and COD removal rate of the PVA hydrogel immobilized with activated sludge had no obvious difference with addition of PPG, and a high microbial activity can be maintained.     

Design and Characterization of PVA–Methacrylic Acid Based Smart Polymeric System for Controlled Release of Metoprolol

In the present work covalently crosslinked smart polymeric system of hydrogel based on poly vinyl alcohol (PVA) and methacrylic acid (MA) was designed by free radical polymerization with different compositions using glyoxal (40 % water solution) as crosslinker. It was observed that swelling of hydrogel had a pronounced enhancing effect on increasing the concentration of MA due to availability of more ionized carboxylic groups of MA but produced an opposite effect on increasing the concentration of glyoxal owing to less porous structure. As far as PVA is concerned, swelling did not show significant effect on increasing the concentration of PVA. Hydrophilic polymer PVA rich in hydroxyl group pertained to be highly interactive with water. It was examined that the release of metoprolol tartrate decreased with increased concentration of glyoxal, but increased with increase in concentration of MA. PVA/MA hydrogel was characterized by Fourier transform infrared spectroscopy and X-ray diffraction to study the structure and crystallinity of hydrogel respectively. Morphology was studied through scanning electron microscopy. Furthermore differential scanning calorimetry and thermogravimetric analysis were also performed to characterize thermal stability. It may be concluded that the mechanism of drug release was mainly non-Fickian diffusion.     

Preparation and Characterization of Hydrogel Based on Poly(vinyl alcohol) Cross-Linked by Different Cross-Linkers Used to Dry Organic Solvents

Poly(vinyl alcohol) (PVA) hydrogels were chemically cross-linked with/without different cross-linkers such as glutaraldehyde and epichlorohydrin, in the presence of a catalyst, or activator (potassium hydroxide) to produce three types of hydrogels. The structures of PVA and the prepared gel types were determined by FTIR spectroscopy, the mechanical and thermal properties, of these hydrogels were examined. The effects of different pH values and temperatures on the swelling properties of the prepared gels were examined. From the obtained results, it was found that, the low concentration of the cross-linker produced hydrogel with moderate properties, but in absence of the cross-linker, the obtained hydrogel exhibited good properties and can be used as friendly environmentally moisture absorbents from the organic solvents. The insolubility and swelling properties of gels were tested in these solvents. The results indicated that these hydrogels can be used as moisture absorbents and solvent dryers.     

Effect of Ionizing Radiation on the Morphological,Thermal and Mechanical Properties of Polyvinyl Alcohol/Polyethylene Glycol Blends

Blends of water—soluble polymers based on Poly vinyl alcohol (PVA) and Polyethylene glycol (PEG) have been prepared by the solution casting technique. The effect of various doses of γ-radiation on the structural properties of PVA/PEG polymer blends with all its compositions has been investigated. From the visual observation of all the blend compositions, it was found that, the best compatibility of the blend is up to 40% PVA/60%PEG. The structure–Property behavior of all the prepared blends before and after γ-irradiation was investigated by IR Spectroscopy, thermogravimetric analysis (TGA), mechanical properties and Scanning electron microscope (SEM). The gel content and the swelling behavior of the PVA/PEG blends were investigated. It was found that the gel content increases with increasing irradiation dose and PVA concentration in the blend. Swelling percent increased as the composition of PEG increased in the blend. The results obtained by FTIR analysis and SEM confirm the existence of possible interaction between PVA and PEG homopolymers. TGA of PVA/PEG blend, before and after γ-irradiation, showed that the unirradiated and irradiated PVA/PEG blends are more stable against thermal decomposition than pure PVA. Improvement in tensile mechanical properties of PVA/PEG blends was occurred.     

Potassium Release Kinetics and Water Retention of Controlled-Release Fertilizers Based on Chitosan Hydrogels

Controlled release fertilizer (CRF) hydrogels were prepared from poly(vinyl alcohol), poly(vinyl alcohol)/chitosan and chitosan using glutaraldehyde as a crosslinker. Intermolecular interactions of the CRF hydrogels were elucidated using FTIR. Water absorbency characteristics of the CRF hydrogels were also studied. It was found that the CRF hydrogels exhibited the equilibrium swelling ratio (SR) in the range 70–300%. The water retention of soil containing the CRF hydrogels was also examined. It was found that the CRF hydrogels increased the water retention of the soil. After 30 days, soil containing the PVA-, PVA/CS- and CS-hydrogels showed the water retention capacities of 25%, 10% and 4%, respectively. While the soil without the CRF hydrogel had already given off most of the water. The release behavior of potassium from the CRF hydrogels, both in deionized water and in soil, was investigated. In soil, the potassium release mechanism from the PVA- and PVA/CS-hydrogels were non-Fickian diffusion. On the other hand, the CS hydrogel showed, n value that was close to 1.0 corresponding to case II transport. In deionized water, all the CRF hydrogels showed small values of release exponent (n < 0.5) indicating a quasi-Fickian diffusion mechanism.     

Eco-Synthesis of PVA/Chitosan Hydrogels for Biomedical Application

A drug delivery system based on physically cross-linked poly vinyl alcohol (PVA)/chitosan blend hydrogels for the release of sparfloxacin antibiotic as a model for drugs was described. Eco-synthesis in current work is based on synthesizing a hydrogel without using chemical crosslinking agents like in the conventional method. In addition all materials are used are non- toxic, safe, non-carcinogenic and can be accepted by the human body without danger. The swelling behavior was tested to be dependent on pH as temperature as well as time and number of freezing thawing cycles. The physical properties of the hydrogels, such as swelling percent, dissolution percent, gel fraction and mechanical properties was assessed. The antimicrobial activity of hydrogels having different compositions was evaluated for both gram positive and gram negative bacteria. Furthermore, the release of antibiotic from hydrogels prepared using the freeze—thawed process was studied. Results obtained disclose that the swelling percent of the hydrogels is pH- dependent and increases by increasing the chitosan percent and decreases with increasing the time and number of freezing cycle. With respect to the antimicrobial activity of the prepared hydrogels, display a positive effect for both gram positive and gram negative bacteria. Freeze-thawed hydrogels could serve as drug delivery system to release sparfloxacin in acidic medium. Indeed, the release percent of sparfloxacin relies on both pH and temperature.     

Preparation and Optimization of Starch/Poly Vinyl Alcohol/ZnO Nanocomposite Films Applicable for Food Packaging

Pollution and destruction of the environment due to the accumulation of non-degradable plastics are some of the most important concerns in the world. A significant amount of this waste is related to the polymers used in food packaging. Therefore, experts in the food industry have been looking for suitable biodegradable alternatives to synthetic polymers. Preparing biocompatible and biodegradable films based on starch is a good choice. In this study, various factors affecting films of starch/polyvinyl alcohol (PVA)/containing ZnO nanoparticles such as the amount of starch, PVA, glycerol, and ZnO were evaluated by response surface methodology (RSM). Film formation by solvent casting method, mechanical properties, swelling, solubility, and water vapor permeability (WVP) were selected as responses of RSM. The results showed that hydrogen bonding interactions between polyvinyl alcohol and starch improved the film formation. The effect of glycerol and PVA content on the mechanical strength was contrary to each other. As the amount of PVA increased, the tensile strength first decreased and then increased. The value of WVP was for all Runs from 0 to 6.77?×?10^??8 g m^??1 s^??1 Pa^??1. Finally, films with high film formation, maximum tensile strength, and high elongation at break, minimum solubility, permeability, and swelling were optimized.

     

The hydration characteristics and utilization of slag obtained by the vitrification of MSWI fly ash

This study investigated the effects of slag composition on the hydration characteristics of slag blended cement (SBC) pastes. Synthetic slag samples were prepared by melting CaO-modified and Al(2)O(3)-modified municipal solid waste incinerator (MSWI) fly ash. MSWI fly ash was mixed with 5% CaO and 5% Al(2)O(3) (by weight), respectively, resulting in two fly ash mixtures. These mixtures were then melted at 1400 degrees C for 30 min to produce two types of slag with different contents, designated at C-slag and A-slag. Both the C-slag and A-slag samples exhibited a pozzolanic activity index higher than the unmodified slag sample. The results show that the synthetic slags all met the Taiwan EPA's current regulatory thresholds. These synthetic slags were then blended with ordinary Portland cement (OPC) at various weight ratios ranging from 10 to 40%. The 28-day strength of the C1 paste was higher than that developed by the OPC paste, suggesting that the C-slag contributed to the earlier strength of the SBC pastes. At curing times beyond 28 days, the strength of the A1 paste samples approached that of the OPC paste samples. It can be seen from this that increasing the amount of calcium and aluminum oxide increases the early strength of SBC. The C-slag blended cement paste samples showed an increase in the number of fine pores with the curing time, showing that the C-slag enhanced the pozzolanic reactions, filling the pores. Also, the incorporation of a 10% addition of C-slag also tended to enhance the degree of hydration of the SBC pastes during the early ages (3-28 days). However, at later ages, no significant difference in degree of hydration between the OPC pastes and the SBC pastes was observed with the 10% C-slag addition. However, the incorporation of A-slag did decreased the degree of hydration. A slag blend ratio of 40% significantly decreased the hydration degree.     

A Novel Eco-friendly Blood Meal-based Bio-adhesive: Preparation and Performance

In this reported study, a renewable and eco-friendly blood meal-based (BM) bio-adhesive was developed for the plywood fabrication. Polyvinyl alcohol (PVA), sodium dodecyl sulphate (SDS), and triglycidylamine (TGA) were respectively employed as emulsifier, denaturant and crosslinking agent to modify the BM adhesive. Three-ply plywood was manufactured and its wet shear strength was tested. The solid content, residual rate, functional groups, thermal degradation behavior, and cross section micromorphology of the resulting adhesives were characterized in detail. The experimental results showed that PVA prevented the BM agglomeration, SDS unfolded the structure of protein and then TGA reacted with the exposed active groups in the BM protein molecules, forming a cross-linked structure. As a result, the thermal stability of the modified BM adhesive was improved and the cross section of the cured adhesive was more homogeneous, which enhanced the performance of the adhesive. Consequently, the wet shear strength of the plywood bonded by modified BM adhesive markedly increased by 388% to 1.27 MPa. Compared with soy bean meal-based adhesive, a higher protein content and hydrophobic amino acids content of BM are benefit for fabricating high performance bio-based adhesive, which rendered the BM adhesive practical for plywood industrial application.     

Green Synthesis and Physical Properties of poly(Vinyl Alcohol) Maleated in an Aqueous Solutions

The objective of this work was to synthesize maleated poly(vinyl alcohol) (PVAM) in aqueous solution through esterification, and to seek near optimal degree of grafting and crosslinking. The effects of maleic anhydride (MA) content on the properties of PVAM were investigated. The experimental observations included characterizations by ATR–FTIR and thermo gravimetric analyses (TGA), and determinations of grafting ratio, dynamic viscosity, and swelling ratio. The percentage degree of grafting, dynamic viscosity, and particle size increased with MA content, while the swelling ratio decreased due to copolymerization of poly(vinyl alcohol) (PVA) and MA. The peaks at 945 and 918 cm^?1 in the spectrum of PVA indicated the presence of carboxylic groups, while in the spectrum of PVAM only one peak at 920 cm^?1 indicated presence of carboxylic groups, due to copolymerization of PVA and MA. Moreover, the thermal stability of PVA-g-MA was enhanced as observed from TGA. The results suggest 7:3 PVA/MA mass ratio as near optimal for PVA-g-MA.     

A Novel Hybrid 2,4-Dichlorophenoxy Acetate Bead from Modified Cassava Starch and Sodium Alginate with Modified Natural Rubber Coating

A novel herbicide bead was developed by phase separation, utilizing modified cassava starch (CSt), sodium alginate (SA) and 2,4-dichlorophenoxy acetate (2,4 DA), and the beads were also coated with natural rubber grafted with cassava starch (NR-graft-CSt) to aid their water resistance. The alginate gel beads with 65% entrapped 2,4 DA showed 90% release within 24 h. The incorporation of CSt in the beads markedly improved their encapsulation efficiency to 98% and sustained the release of the herbicide for 700 h. The water resistance was improved by coating the beads with NR-graft-CSt when compared with the pure CSt/SA bead. The synthesized bead has excellent potential for agricultural applications.     

Effects of fly ash addition on physical properties of porous clay-fly ash composites via polymeric replica technique

The porous composites of clay and fly ash have the potential to be used in many fields, such as catalyst support and gas adsorbents. In this study, various ratios of fly ash (1–2) with different percentage of suspension (50–70 wt%) were applied to produce porous clay-fly ash composites via polymeric replica technique. Fabrication process starts by mixing clay and fly ash in distilled water to form slurry. The process is followed by fully immersing polymer sponge in slurry. The excess slurry is then removed through squeezing. Finally, the sponge coated with slurry is sintered at 500 and 1250 °C for 1 h. It is found that the compressive strength of porous composites improves significantly (0.178–1.28 MPa) when the amount of clay-fly ash suspension mixture (50–70 wt%) increases. The compressive strength of porous composites is mainly attributed to the mullite, quartz and amorphous phase formations. These results are supported by X-ray diffraction analysis. On the other hand, increase in the amount of suspension reduces the apparent density (from 2.44 to 2.32 g/cm³) and porosity (from 97 to 85 %). The reduction in apparent density is believed to be caused by the presence of high fly ash content in porous composites. The melted fly ash cenospheres have closed the internal pores and increased density of samples. Higher suspension level not only reduces porosity, but also increases close pores of the porous composites. The results are justified through the observation from the structures of porous clay-fly ash composites.     

Evaluation of the Biodegradability of Polyvinyl Alcohol/Starch Blends: A Methodological Comparison of Environmentally Friendly Materials

Polyvinyl alcohol (PVA) and starch are both biodegradable polymers. These two polymers can be prepared as biodegradable plastics that are emerging as one of the environmental friendly materials available now. In this study, after reacting with sodium trimetaphosphate (STMP), modified corn starch was blended with PVA in different ratios by a barbender. Test samples were prepared for mechanical and thermal properties measurements. The surface roughness and morphology of fractured surface of the samples were observed by an atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements. Aqueous degradation by enzyme, water absorption and biodegradability behavior were evaluated for the degradability. The biodegradability of these materials was followed by bio-reactivity kinetics models. Results showed that the addition of modified starch could enhance its water uptake. With an addition of 20 wt% of modified starch, the blend had a maximum weight loss during enzymatic degradation. It was found that the degradability was enhanced with the addition of the starch. Analyzing the results of the biodegradability based on the kinetic models, the growth rate of the microorganism was found to be increasing with the increase of the content of starch in the PVA/starch blends in the first order reaction fashion. In our biodegradability analysis, i.e., based on the China national standards (CNS) 14432 regulations, we estimated the decomposition behavior based on the mentioned first order reaction. We found that the PVA/starch blends would take 32.47, 16.20 and 12.47 years to degrade by 70% as their starch content 0, 20 and 40 wt%, respectively.     

Study of Graft Copolymerization of Soy Protein-Methyl Methacrylate: Preparation and Characterization of Grafted Films

Hybrid materials represent the family of compounds comprising mixtures of natural and synthetic materials. The study of this field is in a marked expansion since their preparation represents a valid methodology for optimizing the insufficient properties exhibited by materials integrally formed from naturally-occurring sources. In the present work, we describe soy protein modification by grafting reaction with methyl methacrylate. The reaction was confirmed by Fourier Transform Infrared Analysis and Carbon Nuclear Magnetic Resonance. In addition, films were prepared with the material by heat compression. Films were physically and mechanically characterized by determining contact angle with water, total soluble matter, moisture content, swelling in water, water vapor permeability, tensile strength, elongation at break and Young’s modulus. These measurements suggest that the material increased its hydrophobic character as compared with that of the control film since marked reductions in water vapor permeability, swelling and water solubility were determined. Moreover, their mechanical properties were improved by obtaining a more rigid material. These results represent an interesting advance in the preparation of hybrid biocomposites.     

Preparation and Properties of Carboxymethyl Cellulose (CMC)/Sodium alginate (SA) Blends Induced by Gamma Irradiation

Carboxymethyl Cellulose (CMC)/Sodium alginate (SA) blends have been prepared by casting solution method. The effect of different irradiation doses (2.5, 5, 10, 15, and 20 kGy) of gamma rays on the physical properties of the CMC/SA blend containing different ratios of SA (20, 30, and 40 %) such as gel fraction (%) and swelling (%) of CMC/SA blends were investigated. It was found that the gel fraction increases with increasing irradiation dose up to 20 kGy while the swelling of CMC/SA blend films tends to increase with increasing SA content and reduced with increasing irradiation doses. Mechanical and thermal properties of the blend films were improved when CMC content increased and with increasing irradiation dose up to 20 kGy. Morphology of the blend was examined by SEM, which indicates compatibility between CMC and SA. The blend rich in SA content possessed good antimicrobial activity against Gram +ve Bacteria (Bacillus subtilis).     

Effect of Cell-to-matrix Ratio in Polyvinyl Alcohol Immobilized Pure and Mixed Cultures on Atrazine Degradation

Atrazine biodegradation by immobilized pure and mixed cultures was examined. A pure atrazine-degrading culture, Agrobacterium radiobacter J14a (J14a), and a mixed culture (MC), isolated from an atrazine-contaminated crop field, were immobilized using phosphorylated-polyvinyl alcohol (PPVA). An existing cell immobilization procedure was modified to enhance PPVA matrix stability. The results showed that the matrices remained mechanically and chemically stable after shaking with glass beads over 15 days under various salt solutions and pH values. The immobilization process had a slight effect on cell viability. With the aid of scanning electron microscopy, a suitable microstructure of PPVA matrices for cell entrapment was observed. There were two porous layers of spherical gel matrices, the outside having an encapsulation property and the inside containing numerous pores for bacteria to occupy. J14a and MC were immobilized at three cell-to-matrix ratios of 3.5, 6.7, and 20 mg dry cells/mL matrix. The atrazine biodegradation tests were conducted in an aerobic batch system, which was inoculated with cells at 2,000 mg/L. The tests were also conducted using free (non-immobilized) J14a and MC for comparative purpose. The cell-to-matrix ratio of 3.5 mg/mL provided the highest atrazine removal efficiency of 40–50% in 120 h for both J14a and MC. The free cell systems, for both cultures, presented much lower atrazine removal efficiencies compared to the immobilized cell systems at the same level of inoculation.     

Formulation and Characterization of Sodium Alginate g-Hydroxy Ethylacrylate Bio-Degradable Polymeric Beads: In Vitro Release Studies

Novel type of highly swollen beads were prepared by grafting 2-hydroxyethylacrylate onto biodegradable Sodium alginate (SA) via free-radical polymerization using potassium persulphate as an initiator and Triprolidine hydrochloride as a model drug. Evidence of grafting was obtained by fourier transform infrared spectroscopic technique. Morphological properties of the beads were studied by SEM analysis. Thermal properties and crystallinity of the beads were characterized using differential scanning calorimetry and thermogravimetric analysis and X-ray diffraction techniques, respectively. Dissolution experiments were performed to study the release profiles at 37?°C in phosphate buffer solution (pH-7.4). Effect of monomer content, crosslinking agent and drug/polymer ratio on swelling properties and release profiles were also comparatively studied. A dissolution result concludes that drug release decreases with increasing crosslinker content. The highest release (96%) was obtained for the beads prepared with 0.5?mL crosslinking agent. Equilibrium swelling degree also supports the drug release profiles confirming SA-g-HEA beads showed better release profiles compare to plain SA beads.     

Novative Biomaterials Based on Chitosan and Poly(ε-Caprolactone): Elaboration of Porous Structures

The swelling capability of chitosan was explored in order to use water both, as volatile plasticizer and as pore-forming agent. Chitosan powder was swelled in acidic aqueous solution and melt blended with poly(ε-caprolactone) (PCL). After stabilization at 57% RH and 25 °C, samples suffered a water mass loss of around 30 wt% without dimensions variation. Despite the low miscibility of these biopolymers, quite homogeneous dispersion of chitosan within the polyester matrix was obtained. Some interactions between both biopolymers could be observed. To obtain chitosan phase with a thermoplastic-like behaviour, the plasticization effect was also studied by the addition of 25 wt% glycerol as non volatile plasticizer. The equilibrium moisture content of samples increased with the incorporation of glycerol due to its hydrophilic nature. Morphology, thermal and mechanical properties of the blends were determined after stabilization. The preparation of rich PCL blends allowed the formation of macroporous structures since samples were not contracted after water loss and stabilization. These biomaterials with such a porous structure could be used for biomedical applications.     

Characterization of Biodegradable Composite Films Prepared from Blends of Poly(Vinyl Alcohol), Cornstarch,and Lignocellulosic Fiber

Several composite blends of poly(vinyl alcohol) (PVA) and lignocellulosic fibers were prepared and characterized. Cohesive and flexible cast films were obtained by blending lignocellulosic fibers derived from orange waste and PVA with or without cornstarch. Films were evaluated for their thermal stability, water permeability and biodegradation properties. Thermogravimetric analysis (TGA) indicated the suitability of formulations for melt processing, and for application as mulch films in fields at much higher temperatures. Composite films were permeable to water, but at the same time able to maintain consistency and composition upon drying. Chemical crosslinking of starch, fiber and PVA, all hydroxyl functionalized polymers, by hexamethoxymethylmelamine (HMMM) improved water resistance in films. Films generally biodegraded within 30 days in soil, achieving between 50–80% mineralization. Both starch and lignocellulosic fiber degraded much more rapidly than PVA. Interestingly, addition of fiber to formulations enhanced the PVA degradation.     

Crosslinked Polyacrylamide Composite Hydrogels Impregnated with Fly Ash: Synthesis,Characterization and Their Application as Fractures Sealant for High Water Producing Zones in Oil and Gas Wells

Polymeric hydrogels are designed to serve many purposes in various fields of human endeavor. Herein, crosslinked polyacrylamide (PAM) composite hydrogels impregnated with coal fly ash (CFA) were synthesized, characterized and tested as fracture sealing agents in high water producing permeable zones in petroleum industry. The concept of utilizing CFA as an inorganic additive in the matrix of hydrogel emanates from the fact that CFA constitutes majorly alumina and silica. Both chemical oxides can induce the CFA to promote the inherent properties of hydrogel. Polyethyleneimine (PEI) was chosen as the crosslinking agent. Neat PAM/PEI hydrogel and PAM/PEI–CFA hydrogels at various CFA loadings (0.5, 1 and 2 wt%) were synthesized via a transamidation reaction pathway. The developed hydrogels were characterized by hybrid rheometer, FTIR, SEM and XRD instruments. Rheological results reveal that the PAM/PEI–CFA composite hydrogels embedded with various CFA quantities were more elastic than the neat PAM/PEI hydrogel, indicating the dispersion and reinforcing effect of CFA. The functional groups of these hydrogels were confirmed by the FTIR while SEM analysis show that the surface micrographs of neat PAM/PEI hydrogel and PAM/PEI–CFA1 hydrogel were porous in several regions. In contrast, the micrographs of PAM/PEI–CFA2 and PAM/PEI–CFA3 hydrogels demonstrated dense and “net-like” structural patterns. Further, XRD analysis revealed that CFA impregnation has a significant effect on the bulk structural properties of the fabricated hydrogels. The swelling rates of these hydrogels were determined by the gravimetric method and their diffusion parameters evaluated using Fickian diffusion and Schott-order kinetic models. Efficacy of the PAM/PEI–CFA composite hydrogel as fractures sealant in oil and gas wells was conducted at a typical reservoir temperature, 90 °C, and the outcome demonstrated considerable sealing potency.