Synthesis of halogenated diphenyl ethers and dibenzofurans - A discussion of specific isomers available

Synthetic routes for the preparation of halogenated diphenyl ethers and dibenzofurans are reviewed, and isomers reported in the literature are listed. In addition, the routes preferred for the synthesis of specific chlorinated isomers - especially from the point of view of an unambiguous structural assignment - are discussed in detail. The route recommended for chlorinated diphenyl ethers is the coupling of biaryliodonium salts with phenols, and for chlorinated dibenzofurans the palladium acetate-promoted cyclization of diphenyl ethers. Chlorinated isomers of diphenyl ethers and dibenzofurans which are available via these routes are listed. Furthermore, the synthesis of a new octachlorodiphenyliodonium salt and its coupling with three different chlorophenols are described, and the cyclization of an octachlorodiphenyl ether to octachlorodibenzofuran is shown.     

PVC-induced chlorine-bromine exchange in the pyrolysis of polybrominated diphenyl ethers, -biphenyls, -dibenzodioxins and dibenzofurans

Extensive chlorine-for-bromine exchange occurs when 1,2,3,4-tetrabromodibenzodioxin (TBrDD), polybromodibenzodioxin/furan mixtures (PBrDD/F), and technical brominated diphenyl ethers and -biphenyls are pyrolyzed at 800°C in the presence of PVC. Tetra-ClDD, BrCl₃DD, Br₂Cl₂DD, and Br₃ClDD could be detected from the pyrolysis of 1,2,3,4-TBrDD. A number of chloro/bromodibenzodioxins and furans as well as chlorinated dibenzodioxins and furans are formed in the residues of the PBrDD/F mixtures. Only chlorinated and chlorinated/brominated diphenyl ethers and no dioxins and furans occured during the pyrolysis of brominated diphenyl ethers in the presence of PVC. Through the exchange of bromine with chlorine, chlorinated and chlorinated/brominated biphenyls could be detected from the pyrolysates of hexabromobiphenyl.     

Levels of chlorinated compounds (CPs, PCPPs, PCDEs, PCDFs and PCDDs) in soils at contaminated sawmill sites in Sweden

Soil samples from five contaminated sawmill sites in Sweden were characterized with respect to chlorophenols (CP), chlorinated phenoxy phenols (PCPP, hydroxylated chlorinated diphenyl ethers), chlorinated diphenyl ethers (PCDE), chlorinated dibenzofurans (PCDF) and chlorinated dibenzo-p-dioxins (PCDD). The composition of chlorinated compounds in the soil samples was compared to the composition of two preservatives commonly used in the Scandinavian wood impregnation industry: the 2,3,4,6-tetrachlorophenol preservative called Ky-5 and the pentachlorophenol preservative Dowicide G. The levels of CPs in the soil samples ranged from 0.1 to 4500 mgkg-1 d.w., PCPPs from <0.15 to 940 mgkg-1 d.w., PCDEs from <38 to 6800 microgkg-1 d.w., PCDFs from 7.4 to 18000 microgkg-1 d.w. and PCDDs from 9.9 to 35000 microgkg-1 d.w. The resulting WHO-TEQ of PCDD/Fs in the soil samples ranged from 0.14 to 3000 microgkg-1 d.w. Despite a wide range of concentrations the congener compositions were similar within tetrachlorophenate and pentachlorophenate contaminated soils respectively. The contamination at each sawmill site may be linked to the use of either a tetrachlorphenol preservative, e.g. Ky-5, or a pentachlorophenol preservative, e.g. Dowicide G. Best-fit calculations were used to compare the chlorinated phenol contents of the preservatives to those of the soil samples. This revealed a positive correlation between the hydrophobicity (logKow) of contaminants and the ratio of their levels in soil to preservatives. The relative abundance of the chlorinated compounds varied greatly between the five sites studied, suggesting that their transport parameters differ substantially.     

Fate of PBDEs during food processing: Assessment of formation of mixed chlorinated/brominated diphenyl ethers and brominated dioxins/furans

The aim of this study was to evaluate effects of food processing on PBDE levels, in particular influence of heat treatment on degradation of PBDEs, including possible formation of chlorinated diphenyl ethers or brominated dioxins/furans as degradation products. It was shown that PBDEs heated in the presence of chlorine (from either organic or inorganic sources) formed mixed chlorinated/brominated diphenyl ethers. However, no PCDEs were formed in the presence of lipids. Lipid medium increased stability of PBDEs exposed to UV irradiation. Profile of congeners formed in result of the debromination reaction was significantly different than profiles observed by some other authors in aliphatic organic solvents. Grilling processes increased concentrations (calculated on the fresh product basis) of the studied compounds by 4–8/22–34% for electric/coal grill, respectively. Depending on the congener and on the applied heat treatment, PBDE mass in pork meat after grilling dropped by 26–53%. No detectable quantities of either brominated dioxins or furans were formed during thermal processing of food containing typical levels of PBDEs.     

Occurrence of co-planar polybrominated/chlorinated biphenyls (PXBs), polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) in breast milk of women from Spain

In this study, for the first time, levels and accumulation profiles of eight currently available polybrominated/chlorinated biphenyl congeners (PXBs; XB-77, -105, -118, -126A, -126B, -126C, -156 and -169, named according to IUPAC nomenclature) in human breast milk collected form Spanish women in 2005 were reported. Concentrations and congener specific profiles of polychlorinated biphenyls (PCBs), including co-planar PCBs, (co-PCBs) and polybrominated diphenyl ethers (PBDEs) were also reported.A concentration of 0.45 pg g⁻¹ lipid weight was found for total PXBs, and arithmetic mean concentrations of 125, 25 and 5.5 ng g⁻¹ lipid weight were determined for total PCBs, co-PCBs and total PBDEs respectively. Detectable levels of all congeners investigated, except CB-123 and XB-169 were found. Levels of PCBs were similar to those found in Spanish samples collected after 2000, and lower than those obtained before 2000. CB-138, -153 and -180 were the predominant PCB congeners. PBDE levels, dominated by BDE-47, -99, -100 and -209, were lower than PCB levels. PXB concentrations were the lowest, with XB-156 being the most abundant. The concentration levels of PCBs and PBDEs found in this study were in the same range as those from other European countries. Levels of PXBs were much lower than published values determined in Japan which were the only data found in the literature.     

Chlorinated diphenyl ethers in human adipose tissue

Human adipose tissue samples were analysed for chlorinated diphenyl ethers using gas chromatography-mass spectrometry; none of these compounds were found at a detection limit of 20 ng/g.     

Inter-species differences for polychlorinated biphenyls and polybrominated diphenyl ethers in marine top predators from the Southern North Sea: Part 2. Biomagnification in harbour seals and harbour porpoises

Harbour porpoises (Phocoena phocoena) and harbour seals (Phoca vitulina) were found to differ in the ability to metabolize polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Biomagnification factors (BMFs), calculated between both predators and their prey (sole - Solea solea and whiting - Merlangius merlangus), had a large range of variation (between 0.5 and 91 for PCBs and between 0.6 and 53 for PBDEs). For the higher chlorinated PCBs and the highest brominated PBDEs, the BMF values in adult males were significantly higher than in the juvenile individuals of both species. BMF values of hexa- to octa-PCBs were the highest, suggesting reduced ability to degrade these congeners. Harbour porpoises had higher BMFs for lower chlorinated PCBs and for all PBDEs compared to harbour seals. Other factors, which may influence biomagnification, such as the octanol-water partition coefficients and the trophic level position measured through stable isotope (δ¹⁵N) analysis, were found to be of lesser importance to predict biomagnification in the studied food chain.     

Dioxins,chlorophenols and other chlorinated organic pollutants in colloidal and water fractions of groundwater from a contaminated sawmill site

BACKGROUND, AIM, AND SCOPE: The distribution of chlorinated organic contaminants in groundwater and the importance of colloids were studied in groundwater from a sawmill site contaminated by chlorophenol preservatives. MATERIALS AND METHODS: The groundwater was fractionated into three different size ranges: (1) >0.7 mum, (2) 0.4-0.7 mum and (3) 0.2-0.4 mum and the filtered water phase. The concentrations of chlorophenols (CP), chlorinated phenoxy phenols (PCPP), chlorinated diphenyl ethers (PCDE), chlorinated dibenzofurans (PCDF) and chlorinated dibenzo-p-dioxins (PCDD) were determined in each fraction. The colloids were characterised regarding the chemical composition using X-ray photoelectron spectroscopy (XPS). RESULTS: Chlorophenols were mostly found in the water fraction and PCDD/Fs were found almost exclusively in the particulate fractions. For example, the filtered water phase contained 2,100 mug l(-1) and 0.72 ng l(-1) for CPs and PCDD/Fs, respectively, and the particulate fractions contained 27 mug l(-1) and 32 ng l(-1) for CPs and PCDD/Fs, respectively. XPS evaluation of the particulate phases showed no correlation between the surface chemistry of the particle properties and the distribution of chlorinated compounds. DISCUSSION: The results suggest that groundwater transport of CPs, PCPPs, PCDEs and PCDD/Fs may occur from contaminated sawmill sites and that the colloid-facilitated transport, especially of PCDD/Fs, is substantial. The results correlated well with previous studies of compounds sorbed to dissolved organic carbon, which indicate that dissolved and colloidal organic carbon facilitated the transport of PCDEs, PCDFs and PCDDs particularly. CONCLUSIONS: Several classes of chlorinated compounds were readily detected in the groundwater samples. Due to the differences in their physicochemical properties, CPs, PCPPs, PCDEs and PCDD/Fs vary in their partitioning between colloidal fractions and the filtered groundwater. The proportion of the bound fraction increased with an increasing hydrophobicity of the chlorinated compounds. The groundwater transport of colloid-associated pollutants from the site may be significant. RECOMMENDATIONS AND PERSPECTIVES: The results imply that colloidal particles <0.7 mum are freely mobile in groundwater from this site. The groundwater transport of colloid-associated pollutants may be significant. However, the extent of the problem is not yet known and, thus, further research is needed to evaluate the impact of colloidal transport of hydrophobic organic contaminants. In Sweden alone, 400 to 500 sawmill sites are estimated to be contaminated with PCDD/Fs as a result of the former use of CP-based wood preservatives. The widespread use of CP mixtures for a variety of applications, including wood preservation, indicates that potential colloidal transport will be an issue of concern in many countries.     

Brominated-chlorinated diphenyl ethers formed by thermolysis of polybrominated diphenyl ethers at low temperatures

Polybrominated diphenyl ethers (PBDEs) are a group of brominated flame retardants (BFRs) used mainly as additives in different kinds of plastic material. Various PBDEs are found in all environmental compartments as well as in tissue and blood serum of animals and humans due to their persistence and tendency to bioaccumulate. Emission of PBDEs into the environment can occur during recycling of PBDE-containing plastic material or during their uncontrolled or insufficient combustion as e.g. in accidental fires or landfill fires. Under these circumstances, PBDEs can also function as precursor molecules for the formation of polybrominated dibenzodioxins (PBDDs) and dibenzofurans (PBDFs). In this study, we qualitatively investigated the reaction of two PBDE congeners, 2,2′,4,4′-tetrabromo diphenyl ether (BDE 47) and 2,2′,4,4′,5,5′-hexabromo diphenyl ether (BDE 153), as well as hexabromobenzene (HBB), a flame retardant used in the past, when exposed to temperatures between 250 °C and 500 °C. The formed reaction products were analysed by high resolution gas chromatography–low resolution mass spectrometry (HRGC-LRMS). Among others brominated–chlorinated diphenyl ethers were formed by chlorodebromination of the PBDEs. In addition, thermolysis of BDE 47 and BDE 153 in the presence of tetrachloromethane as model substance for an organic chlorine source was studied. Thermal treatment of HBB resulted in the formation of brominated–chlorinated benzenes.     

Acute oral toxicity and liver oxidant/antioxidant stress of halogenated benzene, phenol, and diphenyl ether in mice: a comparative and mechanism exploration

The lethal doses (LD₅₀s) of fluorinated, chlorinated, brominated, and iodinated benzene, phenol, and diphenyl ether in mice were ascertained respectively under the consistent condition. The acute toxicity of four benzenes orders in fluorobenzene (FB)?<?iodobenzene?<?chlorobenzene≈bromobenzene, that of four phenols orders in 4-iodophenol≈4-bromophenol?<?4-chlorophenol (4-MCP)?<?4-fluorophenol (4-MFP), and that of four diphenyl ethers orders in 4,4′-iododiphenyl ether?<?4,4′-difluorodiphenyl ether?<?4,4′-dichlorodiphenyl ether≈4,4′-dibromodiphenyl ether. General behavior adverse effects were observed, and poisoned mouse were dissected to observe visceral lesions. FB, 4-MCP, and 4-MFP produced toxic faster than other halogenated benzenes and phenols, as they had lower octanol–water partition coefficients. Pathological changes in liver and liver/kidney weight changes were also observed. Hepatic superoxide dismutase, catalase activities, and malondialdehyde level were tested after a 28-day exposure, which reflects a toxicity order basically consistent with that reflected by the LD₅₀s. By theoretical calculation and building models, the toxicity of benzene, phenol, and diphenyl ether were influenced by different structural properties.     

Biosorption and degradation of decabromodiphenyl ether by <Emphasis Type="Italic">Brevibacillus brevis</Emphasis> and the influence of decabromodiphenyl ether on cellular metabolic responses

There is global concern about the effects of decabromodiphenyl ether (BDE209) on environmental and public health. The molecular properties, biosorption, degradation, accumulation, and cellular metabolic effects of BDE209 were investigated in this study to identify the mechanisms involved in the aerobic biodegradation of BDE209. BDE209 is initially absorbed by wall teichoic acid and N-acetylglucosamine side chains in peptidoglycan, and then, BDE209 is transported and debrominated through three pathways, giving tri-, hepta-, octa-, and nona-bromodiphenyl ethers. The C–C bond energies decrease as the number of bromine atoms on the diphenyl decreases. Polybrominated diphenyl ethers (PBDEs) inhibit protein expression or accelerate protein degradation and increase membrane permeability and the release of Cl^?, Na⁺, NH₄ ⁺, arabinose, proteins, acetic acid, and oxalic acid. However, PBDEs increase the amounts of K⁺, Mg²⁺, PO₄ ^3?, SO₄ ^2?, and NO₃ ^? assimilated. The biosorption, degradation, accumulation, and removal efficiencies when Brevibacillus brevis (1 g L^?1) was exposed to BDE209 (0.5 mg L^?1) for 7 days were 7.4, 69.5, 16.3, and 94.6 %, respectively.     

A density functional theory/time-dependent density functional theory study of the structure-related photochemical properties of hydroxylated polybrominated diphenyl ethers and methoxylated polybrominated diphenyl ethers and metal ion effects

Environmental Science and Pollution Research - As&nbsp;the derivatives and structural analogs of polybrominated diphenyl ethers (PBDEs), hydroxylated polybrominated diphenyl ethers (OH-PBDEs)...     

The air-water exchange of polychlorinated biphenyls and polybrominated diphenyl ethers at an urban lake, a receipt water body for the effluent from a municipal sewage treatment plant

The effluents and sludge from municipal sewage treatment plants (MSTPs) are considered as potential sources of many contaminants to the ambient environments. In the present work, the air-water exchange of polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) was studied using passive air samplers at an urban lake, which receives the effluents from a MSTP in Beijing, China. The concentrations of PCBs and PBDEs in atmosphere were in the range 15.5-108 ng sample⁻¹ and 2.37-27.8 ng sample⁻¹, respectively, during the sampling period (August, 2007-July, 2008). The predominant PCBs and PBDEs were lowly halogenated congeners. The calculation for the exchange fluxes of PCBs and PBDEs using fugacity model showed that, the net exchange fluxes in different seasons were closely related to the halogen number of different congeners. Except for CBs-28 and 52, the net exchange fluxes was mainly directed from air to water for most of predominant congeners, which implied that the lower chlorinated CBs were dominated by volatilization process rather than the dry/wet depositions and diffusion between air-water interface, additionally, for heavy congeners, the dry/wet deposition process was an important source of PCBs and PBDEs in this lake.     

Polybrominated diphenyl ethers (PBDEs) and mercury in fish from lakes of the Tibetan Plateau

High mountains may act as cold traps for globally transported persistent organic pollutants (POPs) and mercury (Hg). In the present study, 60 fish samples were collected from eight alpine lakes across the Tibetan Plateau. Concentrations of polybrominated diphenyl ethers (PBDEs), total mercury (HgT) and methyl mercury (MeHg) were quantified in the fish muscle tissues to improve the understanding of pollution status and factors regulating the transport and fate of these contaminants on the Plateau. The results showed that lake-averaged ∑₁₄PBDEs concentration was between 0.09 ng g⁻¹ dw and 4.32 ng g⁻¹ dw, which was lower than those reported for European mountains. The total mercury concentration in individual fish ranged from 243 to 2384 ng g⁻¹ dw, and that of MeHg from 131 to 1610 ng g⁻¹ dw, which is much higher than those reported in other mountain fish. The spatial variation of PBDEs and mercury in the Plateau is largely controlled by the specific meteorological patterns.     

Persistent organic pollutants,heavy metals and parasites in the glaucous gull (Larus hyperboreus) on Spitsbergen

The prediction of a higher parasite infection as a consequence of an impaired immune system with increasing persistent organic pollution (POP) and heavy metal levels were investigated in adult glaucous gull (Larus hyperboreus) from Svalbard. The levels of chlorinated pesticides, polychlorinated biphenyls (PCBs), toxaphenes and polybrominated diphenyl ethers (PBDEs) were measured in liver. Cupper, cadmium, lead, mercury, selenium and zinc were measured in kidney samples. An elevated ratio of PCB-118 was found, suggesting that local contamination from the settlement was detectable in the glaucous gull. Eight cestodes, four nematodes, two acanthocephalan and three trematode helminth species were found in the intestine. A positive correlation was found between cestode intensities and selenium levels and between acanthocephalan intensities and mercury levels. No correlation was found between parasite intensities and POP concentrations. It is concluded that the contaminant levels found in glaucous gulls do not cause immune suppression severe enough to affect parasite intensity.     

Predicting logarithmic values of the subcooled liquid vapor pressure of halogenated persistent organic pollutants with QSPR: How different are chlorinated and brominated congeners?

Logarithmic values of the subcooled liquid vapor pressure (log P_L) were estimated for 1436 polychlorinated and polybrominated congeners of benzenes, biphenyls, dibenzo-p-dioxins, dibenzofurans, diphenyl ethers and naphthalenes by employing the Quantitative Structure–Property Relationships (QSPR) approach. The QSPR model developed with GA–PLS technique was characterized by satisfactory goodness-of-fit, robustness and the external predictive performance (R²Y = 0.970, Q_CV² = 0.970, Q_Ext² = 0.966, RMSE_C = 0.21, RMSE_CV = 0.22 and RMSE_P = 0.22). The externally validated model has been applied to predict subcooled liquid vapor pressure of uninvestigated halogenated persistent organic pollutants. Moreover, a simple arithmetic relationship between logarithmic values of subcooled liquid vapor pressures in pairs of chloro- and bromo-analogues has been found. This relationship can be used for estimating log P_L of a brominated compound, whenever log P_L of its chlorinated counterpart is known, without necessity of performing any time-consuming computations.     

Formation of chlorinated species through reaction of SO2 with NaClO2 powder and their role in the oxidation of NO and Hg0

This study examines gaseous chlorinated species generated from the reaction of sulfur dioxide (SO₂) with sodium chlorite powder (NaClO_2(s)) to obtain insight into the propensity of this process to enhance NO and Hg⁰ oxidation. A packed bed reactor containing NaClO_2(s) was used and the reaction temperature was set to 130 °C. Initially, we determined that the presence of SO₂ enhances the oxidation of NO and Hg⁰ by reaction with NaClO_2(s). We then introduced NO₂ into the gas mixture as a radical scavenger and determined that the chlorinated species generated by the reaction of SO₂ with NaClO_2(s) are OClO, Cl, ClO, and Cl₂. Based on these results, we suggest that such gaseous chlorinated ones are responsible for the enhancement of NO and Hg⁰ oxidation.     

Sorption of chlorinated solvents and degradation products on natural clayey tills

The sorption of chlorinated solvents and degradation products on seven natural clayey till samples from three contaminated sites was investigated by laboratory batch experiments in order to obtain reliable sorption coefficients (K_d values). The sorption isotherms for all compounds were nearly linear, but fitted by Freundlich isotherms slightly better over the entire concentration range. For chloroethylenes, tetrachloroethylene (PCE) was most strongly sorbed to the clayey till samples (K_d = 0.84-2.45 L kg⁻¹), followed by trichloroethylene (TCE, K_d = 0.62-0.96 L kg⁻¹), cis-dichloroethylene (cis-DCE, K_d = 0.17-0.82 L kg⁻¹) and vinyl chloride (VC, K_d = 0.12-0.36 L kg⁻¹). For chloroethanes, 1,1,1-trichloroethane (1,1,1-TCA) was most strongly sorbed (K_d = 0.2-0.45 L kg⁻¹), followed by 1,1-dichloroethane (1,1-DCA, K_d = 0.16-0.24 L kg⁻¹) and chloroethane (CA, K_d = 0.12-0.18 L kg⁻¹). This is consistent with the order of hydrophobicity of the compounds. The octanol-water coefficient (log K_ow) correlated slightly better with log K_d values than log K_oc values indicating that the K_d values may be independent of the actual organic carbon content (f_oc). The estimated log K_oc or log K_d for chlorinated solvents and degradation products determined by regression of data in this study were significantly higher than values determined by previously published empirical relationships. The site specific K_d values as well as the new empirical relationship compared well with calculations on water and soil core concentration for cis-DCE and VC from the Rugårdsvej site. In conclusion, this study with a wide range of chlorinated ethenes and ethanes - in line with previous studies on PCE and TCE - suggest that sorption in clayey tills could be higher than typically expected.     

The partitioning of alkylphenolic surfactants and polybrominated diphenyl ether flame retardants in activated sludge batch tests

Polybrominated diphenyl ethers and nonylphenol polyethoxylates have been reported to be estrogenic and may enter the aquatic environment through the discharge of treated sewage effluent. Therefore, their fate during wastewater treatment processes is an important factor in determining their environmental impact. Batch tests with activated sludge from a Husmann apparatus were used to determine the effects of physico-chemical properties and sludge characteristics on the partitioning of polybrominated diphenyl ether flame retardants and nonylphenol polyethoxylate surfactants during biological wastewater treatment. Hydrophobic compounds, those with high logK(ow) values, were sorbed more rapidly and to a greater extent to the solid phase than more soluble compounds. For these hydrophobic compounds sorption may become an increasingly important removal mechanism as sludge age and therefore solids content increase. The initial rate of partitioning was greatest for the most hydrophobic compounds but all rates diminished with time as a result of progressive saturation of sorbent binding sites, a reduction of sorbate availability and as a consequence of the system reaching equilibrium. The sorption of polybrominated diphenyl ethers fit Freundlich adsorption isotherms demonstrating generally increasing adsorption capacity and efficiency with increasing hydrophobic nature. A correlation between increasing logK(ow) and increasing organic matter content was also observed for both polybrominated diphenyl ethers and nonylphenol polyethoxylates indicating the organic content of mixed liquor will also be influential in removing compounds during wastewater treatment.