Greenhouse gas balance for composting operations

The greenhouse gas (GHG) impact of composting a range of potential feedstocks was evaluated through a review of the existing literature with a focus on methane (CH(4)) avoidance by composting and GHG emissions during composting. The primary carbon credits associated with composting are through CH(4) avoidance when feedstocks are composted instead of landfilled (municipal solid waste and biosolids) or lagooned (animal manures). Methane generation potential is given based on total volatile solids, expected volatile solids destruction, and CH(4) generation from lab and field incubations. For example, a facility that composts an equal mixture of manure, newsprint, and food waste could conserve the equivalent of 3.1 Mg CO(2) per 1 dry Mg of feedstocks composted if feedstocks were diverted from anaerobic storage lagoons and landfills with no gas collection mechanisms. The composting process is a source of GHG emissions from the use of electricity and fossil fuels and through GHG emissions during composting. Greenhouse gas emissions during composting are highest for high-nitrogen materials with high moisture contents. These debits are minimal in comparison to avoidance credits and can be further minimized through the use of higher carbon:nitrogen feedstock mixtures and lower-moisture-content mixtures. Compost end use has the potential to generate carbon credits through avoidance and sequestration of carbon; however, these are highly project specific and need to be quantified on an individual project basis.     

Co-composting of acid waste bentonites and their effects on soil properties and crop biomass

Acid waste bentonite is a byproduct from vegetable oil bleaching that is acidic (pH < 3.0) and hydrophobic. These materials are currently disposed of in landfills and could potentially have a negative impact on the effective function of microbes that are intolerant of acidic conditions. A study was undertaken using three different sources of acid waste bentonites, namely soybean oil bentonite (SB), palm oil bentonite (PB), and rice bran oil bentonite (RB). These materials were co-composted with rice husk, rice husk ash, and chicken litter to eliminate their acid reactivity and hydrophobic nature. The organic carbon (OC) content, pH, exchangeable cations, and cation exchange capacity (CEC) of the acid-activated bentonites increased significantly after the co-composting phase. In addition, the hydrophobic nature of these materials as measured using the water drop penetration time (WDPT) decreased from >10 800 s to 16 to 80 s after composting. Furthermore, these composted materials showed positive impacts on soil physical attributes including specific surface area, bulk density, and available water content for crop growth. Highly significant increases in maize biomass (Zea mays L.) production over two consecutive cropping cycles was observed in treatments receiving co-composted bentonite. The study clearly demonstrates the potential for converting an environmentally hazardous material into a high-quality soil conditioner using readily available agricultural byproducts. It is envisaged that the application of these composted acid waste bentonites to degraded soils will increase productivity and on-farm income, thus contributing toward food security and poverty alleviation.     

Assessment of the greenhouse effect impact of technologies used for energy recovery from municipal waste: A case for England

Waste management activities contribute to global greenhouse gas emissions approximately by 4%. In particular the disposal of waste in landfills generates methane that has high global warming potential. Effective mitigation of greenhouse gas emissions is important and could provide environmental benefits and sustainable development, as well as reduce adverse impacts on public health. The European and UK waste policy force sustainable waste management and especially diversion from landfill, through reduction, reuse, recycling and composting, and recovery of value from waste. Energy from waste is a waste management option that could provide diversion from landfill and at the same time save a significant amount of greenhouse gas emissions, since it recovers energy from waste which usually replaces an equivalent amount of energy generated from fossil fuels. Energy from waste is a wide definition and includes technologies such as incineration of waste with energy recovery, or combustion of waste-derived fuels for energy production or advanced thermal treatment of waste with technologies such as gasification and pyrolysis, with energy recovery. The present study assessed the greenhouse gas emission impacts of three technologies that could be used for the treatment of Municipal Solid Waste in order to recover energy from it. These technologies are Mass Burn Incineration with energy recovery, Mechanical Biological Treatment via bio-drying and Mechanical Heat Treatment, which is a relatively new and uninvestigated method, compared to the other two. Mechanical Biological Treatment and Mechanical Heat Treatment can turn Municipal Solid Waste into Solid Recovered Fuel that could be combusted for energy production or replace other fuels in various industrial processes. The analysis showed that performance of these two technologies depends strongly on the final use of the produced fuel and they could produce GHG emissions savings only when there is end market for the fuel. On the other hand Mass Burn Incineration generates greenhouse gas emission savings when it recovers electricity and heat. Moreover the study found that the expected increase on the amount of Municipal Solid Waste treated for energy recovery in England by 2020 could save greenhouse gas emission, if certain Energy from Waste technologies would be applied, under certain conditions.     

A simple numerical model for predicting organic matter decomposition in a fed-batch composting operation

Using dog food as a model of the organic waste that comprises composting raw material, the degradation pattern of organic materials was examined by continuously measuring the quantity of CO2 evolved during the composting process in both batch and fed-batch operations. A simple numerical model was made on the basis of three suppositions for describing the organic matter decomposition in the batch operation. First, a certain quantity of carbon in the dog food was assumed to be recalcitrant to degradation in the composting reactor within the retention time allowed. Second, it was assumed that the decomposition rate of carbon is proportional to the quantity of easily degradable carbon, that is, the carbon recalcitrant to degradation was subtracted from the total carbon remaining in the dog food. Third, a certain lag time is assumed to occur before the start of active decomposition of organic matter in the dog food; this lag corresponds to the time required for microorganisms to proliferate and become active. It was then ascertained that the decomposition pattern for the organic matter in the dog food during the fed-batch operation could be predicted by the numerical model with the parameters obtained from the batch operation. This numerical model was modified so that the change in dry weight of composting materials could be obtained. The modified model was found suitable for describing the organic matter decomposition pattern in an actual fed-batch composting operation of the garbage obtained from a restaurant, approximately 10 kg d(-1) loading for 60 d.     

Chemical and physical changes following co-composting of beef cattle feedlot manure with phosphogypsum

Nitrogen (N) loss during beef cattle (Bos taurus) feedlot manure composting may contribute to greenhouse gas emissions and increase ammonia (NH(3)) in the atmosphere while decreasing the fertilizer value of the final compost. Phosphogypsum (PG) is an acidic by-product of phosphorus (P) fertilizer manufacture and large stockpiles currently exist in Alberta. This experiment examined co-composting of PG (at rates of 0, 40, 70, and 140 kg PG Mg(-1) manure plus PG dry weight) with manure from feedlot pens bedded with straw or wood chips. During the 99-d composting period, PG addition reduced total nitrogen (TN) loss by 0.11% for each 1 kg Mg(-1) increment in PG rate. Available N at the end of composting was significantly higher for wood chip-bedded (2180 mg kg(-1)) than straw-bedded manure treatments (1820 mg kg(-1)). Total sulfur (TS) concentration in the final compost increased by 0.19 g kg(-1) for each 1 kg Mg(-1) increment in PG rate from 5.2 g TS kg(-1) without PG addition. Phosphogypsum (1.6 g kg(-1) P) addition had no significant effect on total phosphorus (TP) concentration of the final composts. Results from this study demonstrate the potential of PG addition to reduce overall N losses during composting. The accompanying increase in TS content has implications for use of the end-product on sulfur-deficient soils. Co-composting feedlot manure with PG may provide an inexpensive and technologically straightforward solution for managing and improving the nutrient composition of composted cattle manure.     

Mechanical performance of woodfibre–waste plastic composite materials

Plastic products used for packaging are often discarded after a single use resulting in an inexhaustible supply of waste polymeric materials. The stiffness and strength of polymeric materials have been known to improve with the addition of lignocellulosic fibres available in abundance in nature. Hence, composite materials containing natural fibres and waste plastics would result in the reduction of solid wastes and the use of cheap, renewable resources. Composite specimens, consisting of waste plastics obtained from a Kerbside collection (high density polyethylene (HDPE) waste, Janitorial waste, Kerbside waste I and Kerbside waste II) and Pinus radiata woodfibres (medium density fibres (MDF)), have been produced through melt blending and injection moulding. The effects of fibre content, matrix type and interfacial bonding on the tensile and flexural properties of these composite materials have been determined through extensive testing at various conditions. The mechanical properties of these composites at room temperature and humidity depend on the amount of woodfibres, the mechanical properties of the waste plastics used and the presence of a suitable coupling agent. The tensile strengths of MDF/waste plastic composites do not generally change with fibre content except for 40% MDF/HDPE waste and 40% MDF/Kerbside waste II (plus 1% Epolene™) composites, where the tensile strengths increase by about 25% compared to those of the corresponding waste plastics. Flexural strengths of MDF/waste plastic composites increase with the addition of medium density fibres with the exception of MDF/Kerbside waste I composites. The tensile and flexural moduli of MDF/waste plastic composites mostly increase with increasing fibre content.     

The effect of phosphogypsum on greenhouse gas emissions during cattle manure composting

Phosphogypsum (PG), a by-product of the phosphate fertilizer industry, reduces N losses when added to composting livestock manure, but its impact on greenhouse gas emissions is unclear. The objective of this research was to assess the effects of PG addition on greenhouse gas emissions during cattle feedlot manure composting. Sand was used as a filler material for comparison. The seven treatments were PG10, PG20, PG30, S10, S20, and S30, representing the rate of PG or sand addition at 10, 20, or 30% of manure dry weight and a check treatment (no PG or sand) with three replications. The manure treatments were composted in open windrows and turned five times during a 134-d period. Addition of PG significantly increased electrical conductivity (EC) and decreased pH in the final compost. Total carbon (TC), total nitrogen (TN), and mineral nitrogen contents in the final composted product were not affected by the addition of PG or sand. From 40 to 54% of initial TC was lost during composting, mostly as CO(2), with CH(4) accounting for <14%. The addition of PG significantly reduced CH(4) emissions, which decreased exponentially with the compost total sulfur (TS) content. The emission of N(2)O accounted for <0.2% of initial TN in the manure, increasing as compost pH decreased from alkaline to near neutral. Based on the total greenhouse gas budget, PG addition reduced greenhouse gas emissions (CO(2)-C equivalent) during composting of livestock manure by at least 58%, primarily due to reduced CH(4) emission.     

Carbon, nitrogen balances and greenhouse gas emission during cattle feedlot manure composting

Carbon and N losses reduce the agronomic value of compost and contribute to greenhouse gas (GHG) emissions. This study investigated GHG emissions during composting of straw-bedded manure (SBM) and wood chip-bedded manure (WBM). For SBM, dry matter (DM) loss was 301 kg Mg(-1), total carbon (TC) loss was 174 kg Mg(-1), and total nitrogen (TN) loss was 8.3 kg Mg(-1). These correspond to 30.1% of initial DM, 52.8% of initial TC, and 41.6% of initial TN. For WBM, DM loss was 268 kg Mg(-1), TC loss was 154 kg Mg(-1), and TN loss was 1.40 kg Mg(-1), corresponding to 26.5, 34.5, and 11.8% of initial amounts. Most C was lost as CO2 with CH4 accounting for <6%. However, the net contribution to greenhouse gas emissions was greater for CH4 since it is 21 times more effective at trapping heat than CO2. Nitrous oxide (N2O) emissions were 0.077 kg N Mg(-1) for SBM and 0.084 kg N Mg(-1) for WBM, accounting for 1 to 6% of total N loss. Total GHG emissions as CO2-C equivalent were not significantly different between SBM (368.4 +/- 18.5 kg Mg(-1)) and WBM (349.2 +/- 24.3 kg Mg(-1)). However, emission of 368.4 kg C Mg(-1) (CO2-C equivalent) was greater than the initial TC content (330.5 kg Mg(-1)) of SBM, raising the question of the net benefits of composting on C sequestration. Further study is needed to evaluate the impact of composting on overall GHG emissions and C sequestration and to fully investigate livestock manure management options.     

Biological recycling of used baby diapers in a small-scale composting system

In Mexico used disposable diapers account for 6.5% of the urban waste that is sent to landfills, as no alternative treatment or valorization options is available. Due to their mixed organic–inorganic composition, they are usually perceived as a problematic non-biodegradable waste; nevertheless, due to their high cellulose content they could be recycled biologically in order to recover the nutrients present in them. This research assessed the feasibility of composting them along with yard waste, in 200 L bioreactors. An initial mixture of fresh trims of grass (55%), dry leaves (10%), fresh leaves (15%) and mulch (20%) was prepared and characterized to achieve an adequate C/N relationship. In the selected reactors 30% (mass basis) of previously shredded used baby diapers containing urine was added. The composting process lasted three months. Temperature, moisture, pH, nitrogen, CO₂ production, organic matter, C/N ratio, volume and mass reduction were measured and recorded periodically. The composting process was not affected by the presence of diapers. Temperature rose to 60–70 °C in the initial thermophilic phase, and reached a final plateau of 20–30 °C. The initial high temperatures allowed to eliminate the pathogens, as shown in the microbiological tests. Volume and mass of the substrates decreased more than 50% by the end of the process. Mass reduction for diapers was 87%, and only the plastic films were recovered. The final compost had good quality and accomplished with the limits set in the local regulation, except by pH, which has slightly above the set limit. It can be used as a soil amendment, as shown in the phytotoxicity tests performed using tomato. The results show that this is a feasible, affordable option for the valorization of used disposable diapers, which could be applied in small communities or daycare centers.     

Monitoring and optimizing the co-composting of dewatered sludge: a mixture experimental design approach

The management of dewatered wastewater sludge is a major issue worldwide. Sludge disposal to landfills is not sustainable and thus alternative treatment techniques are being sought. The objective of this work was to determine optimal mixing ratios of dewatered sludge with other organic amendments in order to maximize the degradability of the mixtures during composting. This objective was achieved using mixture experimental design principles. An additional objective was to study the impact of the initial C/N ratio and moisture contents on the co-composting process of dewatered sludge. The composting process was monitored through measurements of O(2) uptake rates, CO(2) evolution, temperature profile and solids reduction. Eight (8) runs were performed in 100 L insulated air-tight bioreactors under a dynamic air flow regime. The initial mixtures were prepared using dewatered wastewater sludge, mixed paper wastes, food wastes, tree branches and sawdust at various initial C/N ratios and moisture contents. According to empirical modeling, mixtures of sludge and food waste mixtures at 1:1 ratio (ww, wet weight) maximize degradability. Structural amendments should be maintained below 30% to reach thermophilic temperatures. The initial C/N ratio and initial moisture content of the mixture were not found to influence the decomposition process. The bio C/bio N ratio started from around 10, for all runs, decreased during the middle of the process and increased to up to 20 at the end of the process. The solid carbon reduction of the mixtures without the branches ranged from 28% to 62%, whilst solid N reductions ranged from 30% to 63%. Respiratory quotients had a decreasing trend throughout the composting process.     

Open windrow composting of polymers: an investigation into the rate of degradation of polyethylene

The compostability of degradable polymers under open windrow composting conditions is explored within this paper. Areas for consideration were the use of, and impacts of, degradable polyethylene (PE) sacks on the composting process and the quality of the finished compost product. These factors were investigated through polymer weight loss over the composting process, the amount of polymer residue and chemical contaminants in the finished compost product, the windrow temperature profiles and a bioassay to establish plant growth and germination levels using the final compost product. This trial also included a comparative study of the weight loss under composting conditions of two different types of ‘degradable’ polymer sacks currently on the European market: PE and a starch based product. Statistical analysis of the windrow temperature profiles has led to the development of a model, which can help to predict the expected trends in the temperature profiles of open compost windrows where the organic waste is kerbside collected using a degradable PE sack.     

Composting of vinasse and cotton gin waste by using two different systems

Two composts were obtained by co-composting of a concentrated depotassified beet vinasse and cotton gin waste using two different aeration systems: static aerated pile (forced aeration provided by a blower whom operated in the positive mode) and windrow (turned pile). The composting mixtures were cotton gin trash (55%) and vinasse (45%) (dry weight). In static pile, the total amount of vinasse was added at the beginning of the process whereas, in windrow two additions of vinasse were performed. Differences in temperature changes between both composting systems were found: a faster increase of temperature in the windrow (54 °C at 7 days) than in the static pile (45 °C at 21 days) was observed. Probably in the static pile system, the compaction of the substrates made difficult the correct distribution of the air inside the pile. Moreover, after the second addition of vinasse a new thermophilic phase was started in windrow. The different aeration systems and the way of addition of vinasse could cause differences in organic matter (OM) degradation and in weight (22.6% for the static pile and 26.7% for the windrow) and gas losses during the process. Nevertheless, the composts obtained by the two systems had a high fertilizer value (25.1 g kg⁻¹ N; 3.2 g kg⁻¹ P₂O₅; 21.4 g kg⁻¹ K₂O; C/N8) for compost obtained in static pile and (16.2 g kg⁻¹ N; 3.4 g kg⁻¹ P₂O₅; 16.1 g kg⁻¹ K₂O; C/N 12) for compost obtained in the windrow). A high degree of stability was reached in the final composts. Composting of vinasse with cotton gin waste serves two objectives, disposal of wastes and recycling of waste components.     

我国地膜覆盖和残留污染特点与防控技术

地膜覆盖技术已成为我国农业应用最为广泛的农艺技术之一,但同时地膜残留污染也成为影响农业可持续发展的一个重大问题,系统分析梳理地膜覆盖种植技术、地膜残留污染的特点及防控技术对于该技术合理利用具有重要意义。本文在已有工作基础上,系统分析了我国地膜覆盖种植技术应用情况、地膜残留污染特点和防治技术。结果表明,20世纪80年代以来,我国地膜用量及覆盖面积一直呈大幅度上升态势,年增长率在8％左右,1991—2011年20年间,地膜使用强度增加了3～10倍,但存在明显区域差异。总体上,北方省区的地膜使用强度大,增长幅度快。地膜覆盖应用作物也从经济作物扩大到粮食作物,应用面积最大作物依次为玉米、蔬菜、棉花、烟草和花生等。地膜覆盖技术的应用产生了巨大效益,但同时也带来了一系列污染危害。长期覆膜农田土壤中都存在程度不同的残膜污染,残留量一般在71．9-259．1kg·hm-2。西北地区是残膜污染最严重的地区,土壤中残膜量远远高于华北和西南地区。残留地膜大小和形态多种多样,主要有片状、蜷缩圆筒状和球状等,在土壤中呈水平、垂直和倾斜状分布。目前,我国地膜残留污染防治技术滞后,人工回收是普遍和主要的回收形式,其他防治技术如机械回收、节约型地膜应用、生物降解地膜尚未较大规模应用。当前,为防止地膜残留污染进一步加剧,急需修订完善地膜标准和加强质量监管,提高可回收性;推广节约型地膜使用技术和残膜回收技术;开展地膜覆盖技术适应性研究,促进技术合理利用。     

Diversion from landfill: quality products from valuable plastics

Mechanical recycling of 100% post-consumer plastic waste into high-quality products has been performed. The chemical and physical properties of these recycled materials have been compared with similar products manufactured from virgin resins. The properties of a blow-moulded bottle prepared from 100% post-consumer high-density polyethylene (HDPE) showed that this recycled polymer exceeded the materials specifications for virgin plastic designs. Similarly, a sample of thermoplastic polyolefin (TPO, 100% polypropylene), obtained entirely from shredder residue (SR) displayed sufficient material strength for future separation and reprocessing.     

Solid Waste Treatment as a High-Priority and Low- Cost Alternative for Greenhouse Gas Mitigation

The increased concern about environmental problems caused by inadequate waste management, as well as the concern about global warming, promotes actions toward a sustainable management of the organic fraction of the waste. Landfills, the most common means to dispose of municipal solid waste (MSW), lead to the conversion of the organic waste to biogas, containing about 50% methane, a very active greenhouse gas (GHG). One unit of methane has a global warming potential of 21 computed for a 100-year horizon or 56 computed for 20 years. The waste sector in Israel contributes 13% of total greenhouse gases (GHG) emissions for a time horizon of 100 years (for a time horizon of 20 years, the waste sector contribution equals to more than 25% of total GHG emissions). The ultimate goal is to minimize the amount of methane (CH₄) by converting it to CO₂. This can be achieved by physicochemical means (e.g., landfill gas flare, incineration) or by biological processes (e.g., composting, anaerobic digestion). Since the waste in Israel has a high organic material content, it was found that the most cost-effective means to treat the degradable organic components is by aerobic composting (investment of less than US$ 10 to reduce emission of one ton CO₂ equivalent per year). Another benefit of this technology is the ability to implement it within a short period. The suggested approach, which should be implemented especially in developing countries, could reduce a significant amount of GHG at relatively low cost and short time. The development of a national policy for proper waste treatment can be a significant means to abate GHG emissions in the short term, enabling a gain in time to develop other means for the long run. In addition, the use of CO₂ quotas will credit the waste sector and will promote profitable proper waste management.     

利用生命周期评价方法分析上海市某区生活垃圾处理的温室气体排放

通过生命周期评价（LCA）的方法,对上海市某区生活垃圾处理现状及4个不同可选处理方案的温室气体（GHG）排放量进行了分析。结果表明,当前该区生活垃圾处理系统的GHG排放总量为776.42 t CO2eq.,其中填埋、焚烧和堆肥分别占33%、39%和20%,其他处理单元仅占8%。通过4个可选方案的对比表明,采取垃圾分类收...     

Soil organic carbon sequestration in cotton production systems of the southeastern United States: a review

Past agricultural management practices have contributed to the loss of soil organic carbon (SOC) and emission of greenhouse gases (e.g., carbon dioxide and nitrous oxide). Fortunately, however, conservation-oriented agricultural management systems can be, and have been, developed to sequester SOC, improve soil quality, and increase crop productivity. Our objectives were to (i) review literature related to SOC sequestration in cotton (Gossypium hirsutum L.) production systems, (ii) recommend best management practices to sequester SOC, and (iii) outline the current political scenario and future probabilities for cotton producers to benefit from SOC sequestration. From a review of 20 studies in the region, SOC increased with no tillage compared with conventional tillage by 0.48 +/- 0.56 Mg C ha(-1) yr(-1) (H(0): no change, p < 0.001). More diverse rotations of cotton with high-residue-producing crops such as corn (Zea mays L.) and small grains would sequester greater quantities of SOC than continuous cotton. No-tillage cropping with a cover crop sequestered 0.67 +/- 0.63 Mg C ha(-1) yr(-1), while that of no-tillage cropping without a cover crop sequestered 0.34 +/- 47 Mg C ha(-1) yr(-1) (mean comparison, p = 0.04). Current government incentive programs recommend agricultural practices that would contribute to SOC sequestration. Participation in the Conservation Security Program could lead to government payments of up to Dollars 20 ha(-1). Current open-market trading of C credits would appear to yield less than Dollars 3 ha(-1), although prices would greatly increase should a government policy to limit greenhouse gas emissions be mandated.     

Effect of chemical and microbial amendments on ammonia volatilization from composting poultry litter

Research has shown that aluminum sulfate (alum) and phosphoric acid greatly reduce ammonia (NH3) volatilization from poultry litter; however, no studies have yet reported the effects of these amendments on field-scale composting of poultry litter. The objectives of this study were to (i) evaluate NH3 volatilization from composting litter by measuring both NH3 volatilization and changes in total nitrogen (N) in the litter and (ii) evaluate potential methods of reducing NH3 losses from composting poultry litter. Poultry litter was composted for 68 d the first year and 92 d the second year. Eleven treatments were screened in Year 1, which included an unamended control, a microbial mixture, a microbial mixture with 5% alum incorporated into the litter, 5 and 10% alum rates either surface-applied or incorporated, and 1 and 2% phosphoric acid rates either surface-applied or incorporated. Treatments in Year 2 included an unamended control, a microbial mixture, alum (7% by fresh wt.), and phosphoric acid (1.5% by fresh wt.). Alum and phosphoric acid reduced NH3 volatilization from composting poultry litter by as much as 76 and 54%, respectively. The highest NH3 emission rates were from microbial treatments each year. Compost treated with chemical amendments retained more initial N than all other treatments. Due to the cost and N loss associated with composting poultry litter, composting is not economical from an agronomic perspective compared with the use of fresh poultry litter.     

鲁西北棉田冬季蔬菜越冬种植技术

根据鲁西北棉区冬季蔬菜越冬种植的自然条件和生产实践经验，本文阐述了适合棉区推广的棉田蔬菜越冬种植模式、操作技术规程、技木要点及其效益对比．     

Solid waste characterization,quantification and management practices in developing countries. A case study: Nablus district – Palestine

Solid waste management (SWM) is one of the most challenging issues faced by developing countries that suffer from serious pollution problems caused by the generation of large waste quantities. This paper presents the case study of SWM in the Nablus district – Palestine. Surveys for household residents' and SWM program operators, field investigations, on-site waste measurements and characterizations were conducted. Per capita waste generation rates varied between different localities although trends were similar. Overall, the majority of waste was organic (65.1% by weight), suggesting a strong resource recovery potential in terms of animal feed or compost. Recyclable waste (plastic, paper and card) made up 16.7% by weight the waste composition suggesting an incentive to introduce source separation. Household attitudes complemented the waste characterization study, revealing the main problems faced. SWM operators quoted on the current status, highlighting problems with disposing in unsanitary landfills, ineffective solid waste fees system, increasing solid waste quantities and lacking equipment and experienced personnel. To enhance sustainable SWM, public awareness, funding, expertise, equipment and facilities and other provisions currently lacking or inappropriate must be provided.