Occurrence and behavior of per‐ and polyfluoroalkyl substances from aqueous film‐forming foam in groundwater systems

Per‐ and polyfluoroalkyl substances (PFAS) are fluorinated compounds and the active ingredient in aqueous film‐forming foam (AFFF). AFFF has been identified as a significant source of PFAS contamination in groundwater. PFAS are also present in many other industrial and consumer products and their manufacture and use has led to numerous contaminated sites. Human health risks have been identified with studies linking firefighter cancers to training facilities where AFFF was used. Given the widespread release of these compounds to the environment and their potential health risks, understanding their mobility characteristics is important. This article details the occurrence and behavior of these substances in groundwater systems to help guide the emerging fields of PFAS investigation and remediation. Background is presented on AFFF and PFAS source characteristics, including common industrial and consumer PFAS sources. In addition, chemical properties, sorption and retention parameters, and observed transformation properties of PFAS and related compounds are discussed. Finally, knowledge gaps are identified for future laboratory and field studies.     

Phytoremediation of Hazardous Wastes: Potential Regulatory Acceptability

Phytoremediation has received attention recently, due to promising field test results that indicate potential cost savings when compared with conventional treatments. The various plant-based technologies that comprise the category phytoremediation have some similarities, many differences, and different possible applications. Each application will be site specific and must be evaluated on a case-by-case basis by a regulator. A treatment remedy must be “protective of human health and the environment, maintain protection over time, and minimize untreated waste” (40 CFR 300.430). The regulator's view of phytoremediation is the same as for any proposed remediation technology and asks the basic questions, “Why do you think this technology will decrease risk to human health and the environment, and how will you show that it works?” This article reviews issues related to acceptance of the technology and discusses some of the regulations that may be applicable to phytoremediation.     

Behavior of TiO2 nanoparticles during incineration of solid paint waste: A lab-scale test

In order to assess the potential impacts posed by products containing engineered nanoparticles, it is essential to generate more data about the release of these particles from products’ life cycle. Although first studies were performed to investigate the release of nanoparticles from use phase, very few data are available on the potential release from recycling or disposal of nano-enhanced products.In this work, we investigated the behavior of TiO₂ nanoparticles from incineration of solid paint waste containing these particles. Solid paint debris with and without TiO₂ nanoparticles were treated in a lab scale incineration plant at 950 °C (combustion temperature) and in oxidizing atmosphere. The obtained ashes were also vitrified with additives and the release of Ti was finally evaluated by leaching test. From our incineration lab-scale experiment, we did not observe a release of TiO₂ nanoparticles into the atmosphere, and Ti was attached to the surface of obtained solid residues (i.e. ashes). The characterization of ashes showed that TiO₂ nanoparticles reacted during the incineration to give calcium titanate. Finally, a very low release of Ti was measured, less 1 mg/kg, during the leaching test of ashes vitrified with glass cullet and feldspathic inert. Our work suggests that TiO₂ nanoparticles added in paints may undergo to physicochemical transformation during the incineration, and that Ti found in ashes may be strongly immobilized in glass matrix. Since this conclusion is based on lab-scale experiment, further research is required to identify which nanoparticles will be emitted to the environment from a real-word-incineration system of household hazardous waste.     

Substance Flow Analyses of Organic Pollutants in Stockholm

This paper summarizes substance flow analyses for four organic substances in the City of Stockholm, Sweden: diethylhexyl phthalate (DEHP), alkylphenolethoxylates (APEO), polybrominated diphenylethers (PBDE) and chlorinated paraffins (CP). The results indicate that the stocks of APEO, PBDE and CP all are approximately 200–250 tonnes, whereas the DEHP stock is two orders of magnitude larger. Emissions can be linked to imported consumer goods such as electronics (PBDE) and textiles (APEO), and to construction materials (DEHP, CP). For several of the substances considerable amounts remain in the technosphere for a long time, even after use of the substance in new products has been eliminated. For example, the use of DEHP as plasticizer for PVC plastics in cables and floorings has more or less been phased-out, but still these applications make up a stock of some 20,000 tonnes (85% of the total DEHP stock in Stockholm) and emit 28 tonnes of DEHP annually (93% of overall emissions). Likewise, the use of chlorinated paraffins in sealants has been radically reduced, but there are 170 tonnes of CP in sealants in Stockholm making up 75% of the stock, and causing half of the emissions to water and air. These emissions are likely to continue for decades, and the stocks therefore have to be considered when analysing and managing the impact of urban substance flows on the environment.     

Leaching assessment of concrete made of recycled coarse aggregate: Physical and environmental characterisation of aggregates and hardened concrete

Each year, millions of tonnes of waste are generated worldwide, partially through the construction and demolition of buildings. Recycling the resulting waste could reduce the amount of materials that need to be manufactured. Accordingly, the present work has analysed the potential reuse of construction waste in concrete manufacturing by replacing the natural aggregate with recycled concrete coarse aggregate.However, incorporating alternative materials in concrete manufacturing may increase the pollutant potential of the product, presenting an environmental risk via ground water contamination.The present work has tested two types of concrete batches that were manufactured with different replacement percentages. The experimental procedure analyses not only the effect of the portion of recycled aggregate on the physical properties of concrete but also on the leaching behaviour as indicative of the contamination degree. Thus, parameters such as slump, density, porosity and absorption of hardened concrete, were studied. Leaching behaviour was evaluated based on the availability test performed to three aggregates (raw materials of the concrete batches) and on the diffusion test performed to all concrete.From an environmental point of view, the question of whether the cumulative amount of heavy metals that are released by diffusion reaches the availability threshold was answered. The analysis of concentration levels allowed the establishment of different groups of metals according to the observed behaviour, the analysis of the role of pH and the identification of the main release mechanisms. Finally, through a statistical analysis, physical parameters and diffusion data were interrelated. It allowed estimating the relevance of porosity, density and absorption of hardened concrete on diffusion release of the metals in study.     

Effects of cement on redistribution of trace metals and dissolution of organics in sewage sludge and its inorganic waste-amended products

The suitability of using cement-stabilized sludge products as artificial soils in earth works was evaluated. The sludge products investigated were cemented sludge, cement-treated clay-amended sludge (SS+MC), and cement-treated copper slag-amended sludge (SS+CS). The leachability of lead (Pb), zinc (Zn), copper (Cu), and chromium (Cr) were assessed using the sequential extraction technique, toxicity characteristic leaching procedure (TCLP), NEN 7341 availability test, and column leaching test. The results indicated that Zn leachability was reduced in all the cement-stabilized sludge products. In contrast, Cu was transferred from the organic fraction to the readily leachable phases in the cement-stabilized sludge products and therefore exhibited increased leachability. The increased Cu leachability could be attributed to dissolution of humic substances in the sludge as a result of elevated pH. Good correlation between dissolved organic carbon (DOC) and heavy metal leaching from the cement-stabilized sludge products was observed in the column leaching experiment. Even with a cement percentage as small as 12.5%, calcium silicate hydrate (C-S-H) was formed in the SS+MC and SS+CS products. Inclusion of the marine clay in the SS+MC products could reduce the leaching potentials of Zn, and this was the great advantage of the marine clay over the copper slag for sludge amendment.     

Selection of human consumables for future space missions

Consumables for human spaceflight include oxygen, water, food and food packaging, personal hygiene items, and clothing. This paper deals with the requirements for food and water, and their impact on waste product generation. Just as urbanization of society has been made possible by improved food processing and packaging, manned spaceflight has benefitted from this technology. The downside of this technology is increased food package waste product. Since consumables make up a major portion of the vehicle onboard stowage and generate most of the waste products, selection of consumables is a very critical process. Food and package waste comprise the majority of the trash generated on the current shuttle orbiter missions. Plans for future missions must include accurate assessment of the waste products to be generated, and the methods for processing and disposing of these wastes.     

Acid soluble bio-organic substances isolated from urban bio-waste. Chemical composition and properties of products

As previous work proposed commercial expectations for soluble bio-organic substances (SBO) isolated from compost of urban food, gardening and park trimming residues as chemical auxiliaries, nine urban bio-wastes (BW) treated by aerobic and anaerobic digestion for 0-360 days were used to extract SBO and investigate source variability effects on product chemical composition and properties. The bio-wastes were collected over a 13732 km² area populated by 2.9 millions from 565 municipalities. The SBO were characterized by their content of different C types and functional groups and by their distribution coefficient (K_PEGW) between polyethylene glycol and water. A significant linear correlation was found between K_PEGW and the lipophilic/hydrophilic C ratio. The investigated SBO exhibited up to sixfold change of K_PEGW demonstrating that BW available from densely populated urban areas are an interesting exploitable source of a wide variety of potential products for the chemical market.     

Risk assessment: A site-specific approach to establishing acceptable soil cleanup levels

In 1980 the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) was passed to instigate the cleanup of uncontrolled hazardous waste sites. CERCLA necessitated the development of a set of criteria for estimating the severity of the contamination at these sites, the potential impact on human health and the environment, and establishing appropriate cleanup levels for the contaminated media. The risk assessment (RA) format was developed to meet these challenges. Though RAs vary dramatically in their scope, emphasis, and regulatory application, there are two primary objectives common to all RAs: (1) to evaluate potential risks to human health and the environment posed by the release of hazardous substances and (2) to evaluate and establish safe cleanup levels based primarily on the number and type of potential receptors, the toxicity and mobility of the contaminants, and the types of exposure pathways present. Achieving these objectives may be a relatively simple task or an extremely complex and difficult one depending on the type of material released and our understanding of its behavior in the environment, the site conditions, and the governing regulations. This article presents an approach for establishing acceptable cleanup levels for subsurface soils and illustrates the application of this approach to three different regulated sites.     

Biotests for environmental quality assessment of composted sewage sludge

The quality of sewage sludge-based products, such as composts and growth media, is affected by the contamination of sewage sludge with, potentially, hundreds of different substances. Therefore, it is difficult to achieve the reliable environmental quality assessment of sewage sludge-based products solely based on chemical analysis. In the present work, we demonstrate the use of the kinetic luminescent bacteria test (ISO 21338) to evaluate acute toxicity and the Vitotox? test to monitor genotoxicity of sewage sludge and composted sewages sludge. In addition, endocrine-disrupting and dioxin-like activity was studied using yeast-cell-based assays. The relative contribution of industrial waste water treated at the Waste Water Treatment Plants led to elevated concentrations of polyaromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polychlorinated dibenzo-p-dioxins and -furans (PCDD/F) in sewage sludge. The effect of elevated amounts of organic contaminants could also be identified with biotests able to demonstrate higher acute toxicity, genotoxicity, and potential for endocrine-disruptive properties. Additional extraction steps in kinetic luminescent bacteria test with DMSO and hexane increased the level of toxicity detected. Composting in a pilot-scale efficiently reduced the amounts of linear alkylbenzensulphonates (LASs), nonylphenols and nonylphenolethoxylates (NPE/NPs) and PAH with relative removal efficiencies of 84%, 61% and 56%. In addition, decrease in acute toxicity, genotoxicity and endocrorine-disrupting and dioxin-like activity during composting could be detected. However, the biotests did have limitations in accessing the ecotoxicity of test media rich with organic matter, such as sewage sludge and compost, and effects of sample characteristics on biotest organisms must be acknowledged. The compost matrix itself, however, which contained a high amount of nutrients, bark, and peat, reduced the sensitivity of the genotoxicity tests and yeast bioreporter assays.     

Comparison of leaching tests to determine and quantify the release of inorganic contaminants in demolition waste

The changes in waste management policy caused by the massive generation of waste materials (e.g. construction and demolition waste material, municipal waste incineration products) has led to an increase in the reuse and recycling of waste materials. For environmental risk assessment, test procedures are necessary to examine waste materials before they can be reused. In this article, results of column and lysimeter leaching tests having been applied to inorganic compounds in a reference demolition waste material are presented. The results show a good agreement between the leaching behaviour determined with the lysimeter unit and the column units used in the laboratory. In view of less time and system requirements compared to lysimeter systems, laboratory column units can be considered as a practicable instrument to assess the time-dependent release of inorganic compounds under conditions similar to those encountered in a natural environment. The high concentrations of elements in the seepage water at the initial stage of elution are reflected by the laboratory column leaching tests. In particular, authorities or laboratories might benefit and have an easy-to-use, but nevertheless reliable, method to serve as a basis for decision-making.     

Microtox assay to determine the toxicity of degradation products from degradable plastics

Six types of starch-polyethylene degradable plastics were evaluated for the release of water-soluble toxic compounds under accelerated degradation conditions. A plastic strip (2.5×15.2 cm) was placed in a 250-ml Erlenmeyer flask with 100 ml of ASTM type I water with or without trace element solutions and shaken at 65°C and 110 rpm for 20 weeks in replicates of two. High temperature was used to accelerate the oxidative degradation of polyethylene. Plastic degradation was measured by loss of tensile strength, percentage elongation, strain energy, and weight-average molecular weight. The most rapid period of polyethylene thermal degradation was complete for most materials by day 28. Ten-milliliter aqueous samples were removed from each flask at days 1, 7, 28, 56, 84, and 140 (water volumes were maintained at 100 ml with fresh type I water), filtered through glass filters, then evaluated by using the Microtox Toxicity Analyzer (Microbics Corporation, Carlsbad, CA). No water-soluble toxic compounds were detected during the period of rapid film degradation. Toxicity was observed at day 28 for one film and at day 84 for all films, which could possibly correlate with the release of small oxidative compounds such as formaldehyde and acetaldehyde. Because of the sensitivity of this assay, positive results must be confirmed by otherin vitro studies.Journal Paper No. J-14851 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Projects No. 2889 and 0178.     

Environmental behaviour of a construction made of a mixture of hydraulic binders and air pollution control residues from municipal solid waste incineration Part 2. Simulation tests and validation of the source term modelling

The reuse of waste materials requires the development of assessment methods for the long-term release of pollutants (source term) from wastes (or materials containing wastes) in contact with water. These methods depend on the scenario conditions: characteristics of the materials (especially physical structure and composition), contact with water… The scenario studied here is a water storage reservoir for fire extinguishing. The reservoir construction is made of a mixture of hydraulic binders and air pollution control (APC) residues from municipal solid waste incinerator (MSWI). The modelling of the source term is performed in five steps ranging from the physico-chemical characterisation of the material to the validation of the proposed model by means of field simulation devices. This paper follows a first publication on source term modelling using laboratory tests which therefore concerns the comparison of the results obtained with the previously established model. The first laboratory scale simulation test aims at taking into account the role of the leachate carbonation in the leaching behaviour of the studied material. The results obtained show that air carbonation of the leachate does not fundamentally change mass transfer mechanisms of easily soluble species (especially for alkaline metals). For these species, the use of the apparent diffusional model (model proposed in the previous paper) is, therefore, at first, a satisfactory solution for the prediction of long term leaching behaviour. The field scale test enables us to validate and calibrate the release model determined on a laboratory scale basis.     

A study of Cr(VI) in ashes from fluidized bed combustion of municipal solid waste: leaching, secondary reactions and the applicability of some speciation methods

The use of the fluidized bed technique for the combustion of municipal solid waste is a rather new concept. This type of combustor produces ash residues with somewhat different properties than the residues generated from the traditional mass burn techniques. Therefore, chemical characterization and the investigation of toxic metals behavior during ash water reactions are necessary for the safe disposal of these residues. In the present work, the total elemental composition, mineralogy and leaching behavior of ashes from the combustion of municipal solid waste in a fluidized bed combustion boiler have been investigated. The cyclone ash and, in particular, the filter ash contained considerable amounts of soluble substances, thus giving leachates with high levels of Cl-, Na+, K+, Ca2 + and Al(IIl). On the other hand, the two ash fractions taken in the boiler, the bottom and hopper ashes, were much more stable with respect to the release of salts and heavy metals. Since Cr(VI) is mobile and toxic its release from combustion residues can pose environmental problem. Even though the total Cr contents were similar in all ashes studied, the bottom ash gave about a thousand times higher levels of Cr(VI) in test leachates than the hopper, cyclone and filter ashes. However, it was found that the leached amount of Cr(VI) from the bottom ash decreased significantly when bottom ash was mixed with the hopper ash. The most probable cause for this decrease is the coupled oxidation of Al(0) to Al(III) and reduction of dissolved Cr(VI) to Cr(III). This finding that the mixing of two ash streams from the same boiler could result in the immobilization of Cr may point at a simple stabilization method. Selective extraction of water soluble, exchangeable and sparingly soluble forms of Cr(VI) was also investigated. Extraction methods were evaluated for their suitability for ash matrixes. It was found that interferences due to the presence of reducing substances in some ash materials may occur.     

Laboratory development and field demonstration of self-sealing/self-healing landfill liner

The self-sealing/self-healing (SS/SH) barrier concept is based on the principle that two or more parent materials placed in vertical or horizontal layers will react at their interfaces to form insoluble reaction products. These products constitute a seamless impermeable seal, which is resistant to the transmission of leachate and contaminants. A SS/SH liner formulation was developed in the laboratory and demonstrated at the Sudokwon landfill site in South Korea. Laboratory testing results indicated that a seal with a hydraulic conductivity less than 10(-9) m/s formed after two to four weeks of curing at room temperature, and the seal healed itself after it was fractured. The use of the soil from the Sudokwon landfill site instead of sand as the matrix of the parent materials in the SS/SH liner retarded the sealing and healing of the seal, but did not show an obvious effect on the overall sealing and healing capacity of the seal at early stages. The construction and installation of the field demonstration SS/SH liner were carried out in the same way as for a soil cement liner. The quality of the liner was ensured by the enforcement of quality analysis/quality control procedures during installation. A single sealed ring infiltration test was performed on the field demonstration liner 36 days after the installation was completed. The measurement of water infiltration rate indicated that the liner healed after it was fractured. However, the long-term sealing and healing capacity needs to be further investigated.     

Assessing the environmental impact of ashes used in a landfill cover construction

Large amounts of construction materials will be needed in Europe in anticipation for capping landfills that will be closed due to the tightening up of landfill legislation. This study was conducted to assess the potential environmental impacts of using refuse derived fuel (RDF) and municipal solid waste incineration (MSWI) ashes as substitutes for natural materials in landfill cover designs. The leaching of substances from a full-scale landfill cover test area built with different fly and bottom ashes was evaluated based on laboratory tests and field monitoring. The water that drained off above the liner (drainage) and the water that percolated through the liner into the landfill (leachate) were contaminated with Cl^?, nitrogen and several trace elements (e.g., As, Cu, Mo, Ni and Se). The drainage from layers containing ash will probably require pre-treatment before discharge. The leachate quality from the ash cover is expected to have a minor influence on overall landfill leachate quality because the amounts generated from the ash covers were low, <3–30 l (m² yr)^?1. Geochemical modelling indicated that precipitation of clay minerals and other secondary compounds in the ash liner was possible within 3 years after construction, which could contribute to the retention of trace elements in the liner in the long term. Hence, from an environmental view point, the placement of ashes in layers above the liner is more critical than within the liner.     

Papermill industrial waste as a sustainable source for high efficiency absorbent production

Papermill sludge (PMS) is generated during the wastewater treatment process of paper production. Its handling and disposal techniques are of great concern for the environment. It can be landfilled as a waste, or it can be recycled and converted into useful products of high value. It has a very promising application as an absorbing agent for the cleaning of water surfaces polluted with hydrophobic substances (vegetable, synthetic and mineral oils, animal fats, fuels, organic chemicals and even coal dust). Here, we present the pretreatment procedure (hydrophobation, mechanical and thermal treatments) of PMS that produces a lightweight absorbent material (HAWSC - high efficiency absorbent for water surface cleaning), which floats on the water surface and binds hydrophobic pollutants with considerably higher efficiency than commercially available mineral and synthetic absorbents. After its application, it can be incinerated, due to its high caloric value, to produce energy. The incineration residues can then be formed into granules that can be used as an efficient absorbent for fluids spilled onto solid surfaces.     

Expect the best but plan for the worst: Negotiating contracts for remediation services

The risks associated with environmental remediation projects are of concern to engineers, consultants, contractors, owners, and the public. The cost, scheduling, and other uncertainties inherent in performance of construction at sites contaminated by hazardous substances dictate caution with respect to contract terms. Further, the possibility that conditions will be exacerbated by the work, or the public or workers exposed to on-site substances, makes remediation projects of particular concern to those who will be held accountable for the effects and impacts of such substances. This article discusses particularly important contractual issues and suggests approaches for liability allocation and incentives. Practical, effective, realistic approaches to management of environmental remediation are presented, including the form of contract utilized, negotiated terms, attention to contractor selection and management, and the parties' relative economic strength.     

Review and prospect of emerging contaminants in waste – Key issues and challenges linked to their presence in waste treatment schemes: General aspects and focus on nanoparticles

The presence in waste of emerging pollutants (EPs), whose behaviours and effects are not well understood, may present unexpected health and environmental risks and risks for the treatment processes themselves. EP may include substances that are newly detected in the environment, substances already identified as risky and whose use in items is prohibited (but which may be present in old or imported product waste) or substances already known but whose recent use in products can cause problems during their future treatment as waste. Several scientific studies have been conducted to assess the presence of EP in waste, but they are mostly dedicated to a single category of substance or one particular waste treatment. In the absence of a comprehensive review focused on the impact of the presence of EP on waste treatment schemes, the authors present a review of the key issues associated with the treatment of waste containing emerging pollutants. This review presents the typologies of emerging pollutants that are potentially present in waste along with the major challenges for each treatment scheme (recycling, composting, digestion, incineration, landfilling and wastewater treatment). All conventional treatment processes are affected by these new pollutants, and they were almost never originally designed to consider these substances. In addition to these general aspects, a comprehensive review of available data, projects and future R&D needs related to the impact of nanoparticles on waste treatment is presented as a case study.     

A Sustainable Perspective for Macadamia Nutshell Residues Revalorization by Green Composites Development

Journal of Polymers and the Environment - Macadamia is a nut widely used globally in food, personal hygiene products, and human health. After removing the nut, high amounts of the shell residual,...