共查询到19条相似文献,搜索用时 375 毫秒
1.
本文提出了废水治理工程综合评价的多层次模糊综合评判模型,并与层次分析法相结合,对某省七家小草浆厂蒸废液治理工程的综合效益进行了排序计算,结果证明了该评价方法的科学性和实用性。 相似文献
2.
我国小草浆厂污染治理技术分析和评价 总被引:31,自引:0,他引:31
介绍了我国造纸工业的特点、污染的现状与原因,简要分析了碱回收法等6种造纸黑液的污染治理技术及中段水治理技术,并对小草浆厂实现达标排放进行了初步的技术评价。 相似文献
3.
4.
5.
高富传 《环境与可持续发展》1986,(1)
目前,国内对麦草半化学浆和石灰法稻草浆黑液的治理还没有找到切实可行的技术路线.红叶造纸厂为从根本上解决造纸污染等问题,主动与有关单位联系,使得有关的研究工作能够顺利开展,在治理两种造纸黑液的工作上,迈出了可喜的一步.会议鉴定表明:石灰法稻草浆黑液pH=10,COD=5万PPm,含钙3500PPm.轻工业学院利用红叶造纸厂经自然筛选的厌氧菌 相似文献
6.
为解决造纸黑液的治理和利用问题,提出了利用造纸黑液活化磷矿浆的方法,研究了造纸黑液活化磷矿浆降低磷矿浆粘度和表面张力的规律,分析了造纸黑液活化磷矿浆的机理。实验结果表明:木浆黑液和芦苇浆黑液能有效地降低矿浆的粘度和表面张力,控制磷矿浆含水率在26% ̄28%之间,矿浆粘度降至0.870pa.s以下,同时还表明,磷矿浆pH值对造纸黑液活化磷矿浆影响很大。 相似文献
7.
8.
爆破浆经二级挤浆提取黑液,黑液经三效真空蒸发浓缩后,送锅炉内燃烧,每立方浓黑液可节煤91.06 kg。提取黑液后造纸综合废水COD质量浓度可控制在1 250~1 450 mg/L,经"加药沉淀+水解酸化+SBR"工艺处理,可使废水COD排放质量浓度稳定低于100 mg/L。 相似文献
9.
10.
11.
12.
草浆造纸黑液资源化综合利用 总被引:2,自引:0,他引:2
谭艳坤 《辽宁城乡环境科技》2006,26(2):48-49
草浆造纸黑液污染负荷占造纸废水总污染负荷的90%以上,黑液的治理成了制约造纸企业发展的最大问题。通过对国内黑液排放污染现状的分析,提出了关于黑液资源化综合利用的途径,为解决造纸带来的污染提供了有益的参考。 相似文献
13.
14.
15.
用草浆造纸黑液制取活性炭 总被引:5,自引:0,他引:5
本法用酸水解炭化、ZnCl_2活化法处理草浆造纸黑液生产活性炭.结果表明,由7—8Be的草浆黑液1L可制20g左右的活性炭.活性炭的碘值>1000mg/g,亚甲基兰值>180ml/g,其主要指标已超过我国LY216-79和日本JIS K1426标准一级品的要求.提取活性炭后,黑液中COD_(Cr)去除率达72%,色度去除率达93%.残液还可作提取Na_2SO_4、糠醛的原料. 相似文献
16.
介绍碱法草浆黑液采用膜技术处理的各种方案,着重介绍了碱法草浆黑液资源化全回收技术并提出了新的技术方案,该方案是先用硫酸中和酸析黑液中的木质素,或用纳滤方案回收木质素,然后采用双极膜电渗析法回收已去除木质素的黑液中的酸和碱,最后经蒸发和喷雾干燥回收其中的糖、其他营养成分及大部分水,达到无污染排放的目的。该方案碱回收率在50%~80%,取决于黑液中碱的浓度,回收1 t碱的耗电量低于2 500 kW.h。该法的基本投资比同规模碱回收法节省60%以上,具有较好的经济效益。 相似文献
17.
《Journal of Cleaner Production》2008,16(18):1971-1979
Growing demand for paper is putting pressure on the World's forests, and although paper made from agricultural residues could meet global demand five times over, today less than 10% is made using these resources. The primary reason for this is the absence of cost effective, small-scale (∼10,000 tonnes per annum), environmentally sound pulping technology. The BioRegional MiniMill was developed in response to this problem. The MiniMill is a modular, regional scale, sustainable pulping process designed for straw and other non-wood feedstocks. The MiniMill innovates in two key areas: (i) preparation, feeding and pulping of straw using a twin screw extruder to reduce energy use, produce pulp in a shorter time and improve pulp quality, and (ii) the inclusion of a small-scale black liquor chemical and energy recovery system, based upon novel fluidised bed technology. The MiniMill is projected to be cost competitive at less than one-tenth the size of the smallest conventional wood-based pulping mill. As with conventional pulp mills, the MiniMill recovers enough renewable energy from the effluent to power the mill and qualifies for carbon emissions credits in accredited countries. In this work we report on some of the key research and development activities, at laboratory, pilot and semi-industrial scale, that have underpinned the design and development of the MiniMill. The ultimate goal of the project is to make available a technically and economically viable process for small-scale cellulose pulp production, that will facilitate the uptake of alternative uses of wheat straw, hemp or flax into the market place. 相似文献
18.