Solubilization of zinc compounds by the diazotrophic, plant growth promoting bacterium Gluconacetobacter diazotrophicus

Gluconacetobacter diazotrophicus an endophytic diazotroph also encountered as rhizosphere bacterium is reported to possess different plant growth promoting characteristics. In this study, we assessed the zinc solubilizing potential of G. diazotrophicus under in vitro conditions with different Zn compounds using glucose or sucrose as carbon sources. G. diazotrophicus showed variations in their solubilization potential with the strains used and the Zn compounds tested. G. diazotrophicus PAl5 efficiently solubilized the Zn compounds tested and ZnO was effectively solubilized than ZnCO(3) or Zn(3)(PO(4))(2). The soluble Zn concentration was determined in the culture supernatant through Atomic Absorption Spectrophotometer. Gas chromatography coupled Mass Spectrometry analysis revealed 5-ketogluconic acid, a derivative of gluconic acid as the major organic acid produced by G. diazotrophicus PAl5 cultured with glucose as carbon source. This organic anion may be an important agent that helped in the solubilization of insoluble Zn compounds.     

Retention of Cd, Zn and Co on hydroxyapatite filters

This study qualifies and quantifies the immobilization of Cd, Zn and Co, (used as models of bivalent metal ions due to their relevant toxicity) in filters of synthetic hydroxyapatite (HAP) [Ca5(PO4)3OH]. They were flushed with solutions containing Cd (1 x 10(-5)M), Zn and Co (1 x 10(-4)M) at constant pH (8.6) and ionic strength (0.01 M). The concentration of these metal ions in the outlet was measured by ICP-OEM spectroscopy. The software PHREEQC (version 2.4.2) was used to model sorption process and the potential effect of salinity (KCl), pH, alkalinity (NaHCO3) and hardness (CaCl2) over the efficiency of the treatment. Results showed an excellent retention capacity of HAP for Cd, Zn and Co. Sorption data were successfully described considering a mix model of surface complexation onto phosphate surface groups, ionic exchange in surface calcium sites and the precipitation of ZnO. Co exchange and surface complexation constants (Kex and Kc) were taken from previous experiments, while KexCd=0.32 and KcCd=0.63 were estimated from our modeling results. Predictive values of metal ion sorption show that: (a) an increase in hardness does not play a significant role in the retention capacity of these metals on HAP; (b) an increase in alkalinity promotes the precipitation of MeCO3 which could alter the hydrodynamic of the column; (c) a decrease in pH and an increase in salinity inhibit ZnO precipitation enhancing Zn and Cd adsorption and decreasing Co retention on HAP.     

Mechanisms of lead, copper, and zinc retention by phosphate rock

The solid-liquid interface reaction between phosphate rock (PR) and metals (Pb, Cu, and Zn) was studied. Phosphate rock has the highest affinity for Pb, followed by Cu and Zn, with sorption capacities of 138, 114, and 83.2 mmol/kg PR, respectively. In the Pb-Cu-Zn ternary system, competitive metal sorption occurred with sorption capacity reduction of 15.2%, 48.3%, and 75.6% for Pb, Cu, and Zn, respectively compared to the mono-metal systems. A fractional factorial design showed the interfering effect in the order of Pb>Cu>Zn. Desorption of Cu and Zn was sensitive to pH change, increasing with pH decline, whereas Pb desorption was decreased with a strongly acidic TCLP extracting solution (pH = 2.93). The greatest stability of Pb retention by PR can be attributed to the formation of insoluble fluoropyromorphite [Pb(10)(PO(4))(6)F(2)], which was primarily responsible for Pb immobilization (up to 78.3%), with less contribution from the surface adsorption or complexation (21.7%), compared to 74.5% for Cu and 95.7% for Zn. Solution pH reduction during metal retention and flow calorimetry analysis both supported the hypothesis of retention of Pb, Cu, and Zn by surface adsorption or complexation. Flow calorimetry indicated that Pb and Cu adsorption onto PR was exothermic, while Zn sorption was endothermic. Our research demonstrated that PR can effectively remove Pb from solutions, even in the presence of other heavy metals (e.g. Cu, Zn).     

Phosphate-induced metal immobilization in a contaminated site

To assess the efficiency of P-induced metal immobilization in soils, a pilot-scale field experiment was conducted at a metal contaminated site located in central Florida. Phosphate was applied at a P/Pb molar ratio of 4.0 with three treatments: 100% of P from H3PO4, 50% of P from H3PO4+ 50% of P from Ca(H2PO4)2, and 50% of P from H3PO4+5% phosphate rock in the soil. Approximately 1 year after P application, soil and plant samples were collected to determine mobility and bioavailability of selected metals (Pb, Zn, and Cu) using sequential extraction procedure and mineralogical characterization using X-ray diffraction (XRD) and scanning electron microscope-energy dispersive X-ray (SEM-EDX) analysis. Phosphorus distribution and soil pH effects were also evaluated. Phosphate was more effective in transforming soil Pb (to 53%) from the non-residual to the residual phase than soil Zn (to 15%) and soil Cu (to 13%). This was because Pb was immobilized by P via formation of an insoluble pyromorphite-like mineral in the surface and subsurface of the soil, whereas no phosphate mineral Zn or Cu was identified. While P amendment enhanced metal uptake in the roots of St. Augustine grass (Stenotaphrum secundatum), it significantly reduced metal translocation from root to shoot, especially Pb via formation of a pyromorphite-like mineral on the membrane surface of the root. A mixture of H3PO4 and phosphate rock was effective in metal immobilization, with less soil pH reduction and less soluble P. Although H3PO4 was effective in immobilizing Pb, its use should be limited to minimize soil pH reduction and potential eutrophication risk.     

Influence of metal oxides on PCDD/Fs formation from pentachlorophenol

Chlorophenols (ClPhs) are considered as important precursors for PCDD/Fs formation. The influences of series of metal oxides including MgO, Al2O3, CaO, BaO, TiO2, V2O5, MnO2, Fe2O3, Co3O4, CuO, Ag2O, ZnO, HgO, SnO, PbO, La2O3, CeO2, and Eu2O3 on PCDD/Fs formation from pentachlorophenol (PCP) were investigated in a laboratory-scale reactor. The results indicated that most of the above metal oxides have obvious suppressing effects on the total amount of PCDD/Fs formation from precursor PCP except for CuO, ZnO, MnO2, TiO2 and Co3O4 with promotion effects at 280 degrees C for 2 h. Although MgO, Al2O3, Fe2O3, PbO, La2O3 and Eu2O3 could reduce the amount of octachlorinated dibenzo-p-dioxin (OCDD), they promote the formation of more toxic 1,2,3,4,6,7,8-HpCDD at the same time. The total suppressing efficiencies of several metal oxides including CaO, BaO, PbO, Ag2O, HgO and SnO which have lower Z/r (charge to radius ratio) <2 are all over 90%. The theories of generalized acid-base and atomic parameter (Z/r) were used to speculate the effecting mechanisms. The factors including time and temperature on suppressing efficiencies of CaO, BaO and PbO have also been studied in the present paper. The results showed that the total suppressing efficiencies of CaO, BaO and PbO increase with the increase of heated time and temperature.     

In situ immobilization of Cu(II) in soils using a new class of iron phosphate nanoparticles

This study tested the feasibility of using a new class of iron phosphate (vivianite) nanoparticles synthesized using sodium carboxymethyl cellulose (NaCMC) as a stabilizer for in situ immobilization of Cu(II) in soils. Transmission electron microscopy measurements demonstrated that the particle size was about 8.4+/-2.9 nm. Batch tests showed that nano-sized vivianite particles can effectively reduce the leachability and in vitro bioaccessibility of Cu(II) in three representative soils (calcareous, neutral, and acidic) at the low doses of 0.61 and 3.01 mg PO(4) g(-1) soil. The Cu leachability was evaluated by the toxicity characteristic leaching procedure and in vitro bioaccessibility was evaluated by the physiological based extraction test. In the case of soil amendment with nanoparticles in 3.01 mg PO(4) g(-1) soil, Cu leachability reduced 63-87% and Cu concentrations in TCLP extract decreased from 1.74-13.33 mg l(-1) to 0.23-2.55 mg l(-1) after those soils were amended for 56 d. Meanwhile, the bioaccessibility of Cu was reduced by 54-69%. Sequential extraction procedures showed the significant decrease of water soluble/exchangeable Cu(II) and carbonate bound fractions and concomitant increase of Cu residual fraction after the soils were amended with the nanoparticles, suggesting that the formation of copper phosphate minerals through precipitation and adsorption was probably responsible for the decrease of Cu availability in soils. Visual MINTEQ modeling further revealed that Cu(3)(PO(4))(2) and Cu(5)(PO(4))(3)OH were formed in the vivianite-solid Cu(II) system, resulting in the decreased solubility of the Cu(II) in the acidic pH range.     

Toxicity of nanosized and bulk ZnO, CuO and TiO2 to bacteria Vibrio fischeri and crustaceans Daphnia magna and Thamnocephalus platyurus

As the production of nanoparticles of ZnO, TiO2 and CuO is increasing, their (eco)toxicity to bacteria Vibrio fischeri and crustaceans Daphnia magna and Thamnocephalus platyurus was studied with a special emphasis on product formulations (nano or bulk oxides) and solubilization of particles. Our innovative approach based on the combination of traditional ecotoxicology methods and metal-specific recombinant biosensors allowed to clearly differentiate the toxic effects of metal oxides per se and solubilized metal ions. Suspensions of nano and bulk TiO2 were not toxic even at 20 g l(-1). All Zn formulations were very toxic: L(E)C50 (mg l(-1)) for bulk ZnO, nanoZnO and ZnSO4.7H2O: 1.8, 1.9, 1.1 (V. fischeri); 8.8, 3.2, 6.1 (D. magna) and 0.24, 0.18, 0.98 (T. platyurus), respectively. The toxicity was due to solubilized Zn ions as proved with recombinant Zn-sensor bacteria. Differently from Zn compounds, Cu compounds had different toxicities: L(E)C50 (mg l(-1)) for bulk CuO, nano CuO and CuSO4: 3811, 79, 1.6 (V. fischeri), 165, 3.2, 0,17 (D. magna) and 95, 2.1, 0.11 (T. platyurus), respectively. Cu-sensor bacteria showed that toxicity to V. fischeri and T. platyurus was largely explained by soluble Cu ions. However, for Daphnia magna, nano and bulk CuO proved less bioavailable than for bacterial Cu-sensor. This is the first evaluation of ZnO, CuO and TiO2 toxicity to V. fischeri and T. platyurus. For nano ZnO and nano CuO this is also a first study for D. magna.     

大洋锰结核在环境污染治理方面的应用

大洋锰结核能够有效分解转化气体污染物(如CO、CH、VOC、NOx、SO2);能够吸附水体中的Cu、CO、Ni、Mn、Zn、Cr、Hg、Pb、As等重金属阳离子和PO4^3-、SeO3^2-等阴离子;可做生物固定化载体除去水体中的有机污染物。大洋锰结核具有良好的环境矿物学属性,是一种理想的环境矿物材料,为环境治理提供了新的方向。     

Determination of zinc speciation in basic oxygen furnace flying dust by chemical extractions and X-ray spectroscopy

There is a growing concern regarding the environmental and public health risks associated with airborne particulate matter (PM). The basic oxygen furnace is one of the most important atmospheric dust sources of the steel manufacturing process. It emits dust enriched in heavy metal such as Zn, which is assumed to contribute to the toxic potential of atmospheric PM. Dust collected before and after the filtration system was analyzed to determine Zn speciation. To this end, a variety of analytical tools were used and a sequential extraction protocol has been specifically developed for iron and steel dust. The Zn speciation results obtained by EXAFS and sequential extraction were in excellent agreement. Before filtration, the speciation of Zn in BOF was 43% ZnFe₂O₄, 23% ZnCO₃ and 16% ZnO. The same species were detected after filtration with different proportions. BOF dust after filtration contains more soluble Zn phases which may play a role in the toxic effects of the emissions.     

Evaluation of natural and anthropogenic influences on the Guadalquivir River (Spain) by dissolved heavy metals and nutrients

To evaluate both the natural and anthropogenic influences on surface waters of Guadalquivir River (SW-Spain), concentrations of dissolved trace metals (Mn, Co, Ni, Cu, Cd, Zn, and Pb), inorganic nutrients (N-NH(4)(+), N-NO(3)(-), N-NO(2)(-), and P-PO(4)(3-)) and other variables as conductivity, pH, dissolved oxygen (DO) and suspended solids (SS) were measured during a three-years period (2001-2003). Samples were taken at 26 stations twice a year, during rain and dry periods. The analysis of variance (ANOVA) suggested that temporal variations within the period of study were statistically negligible. Spatial distributions identified three different zones, mainly influenced by sewage (Eastern Zone), agriculture runoffs (Central Zone), and estuarine processes (Western Zone), respectively. Principal Component and Cluster Analysis allowed to identify the variables controlling the water quality of each zone as: N-NH(4)(+), N-NO(2)(-), Mn, and Co, (Eastern Zone), SS, and P-PO(4)(3-) (Central Zone), and Cd, pH and conductivity (Western Zone). Other variables such as Ni, Cu, Zn or N-NO(3)(-), influenced two different zones, while Pb presented a singular behavior.     

Phosphate-induced lead immobilization from different lead minerals in soils under varying pH conditions

This study investigated phosphate-induced lead immobilization from different Pb minerals in soils under varying pHs. Four soils were used, including one Pb-contaminated soil (NC-Soil) and three soils spiked with litharge (PbO), cerrusite (PbCO3), or anglesite (PbSO4), referred to as PbO-soil, PbCO3-soil, and PbSO4-soil, respectively. The soils were equilibrated with KCl and Ca(H2PO4)(2).H2O under pH of 3-7. At low pH (3 and 5), Pb solubility followed PbO-soil>PbCO3-soil>PbSO4-soil; while at pH=7, it was PbSO4-soil>PbO-soil>PbCO3-soil. Phosphate decreased Pb dissolution time from >180 to <60 min and reduced soluble Pb by 67-100%. This was mostly via transformation of Pb minerals into chloropyromorphite [Pb(5)(PO(4))(3)Cl]. Our results indicated that P addition can effectively transform various Pb minerals into insoluble chloropyromorphite in soils. This transformation was more significant at acidic condition (e.g., pH相似文献   

Atmospheric input of elements to forest ecosystems: a method of estimation using artificial foliage placed above rain collectors

Usefulness of a method of artificial foliage was tested for estimation of total ionic inputs from the atmosphere to forest ecosystems, as well as of processes relevant to ionic fluxes through tree canopies: uptake, leaching, passive flow. The studies were performed in Norway spruce and European beech stands in Karkonosze Mountains (Poland), in 1995-97. Artificial leaves of increasing leaf area index: 0, 2, 6 and 12 m(2) m(-2 )were placed above standard rain collectors. It has been found that total atmospheric fluxes of H(+), NH(4)(+), Ca(2+), Mg(2+), Pb(2+), NO(3)(-) and SO(4)(2-) rose as surface area of the foliage increased. This was especially true for nitrate, sulphate and ammonium. No such relationship was found for K(+), Na(+), Zn(2+), Cd(2+), Cu(2+) and PO(4)(3-). The increase in anion fluxes exceeded that in neutralising cations (NH(4)(+), Na(+), K(+), Mg(2+), Ca(2+)) and led to progressive rainwater acidification with the increase in the foliage area. An analysis of net canopy exchange (atmospheric input-throughfall flux) has shown that SO(4)(2-), PO(4)(3-), Na(+), Ca(2+) and Cu(2+) flowed passively through the tree crowns; NH(4)(+), NO(3)(-), Zn(2+), Cd(2+) and occasionally Pb(2+) were efficiently absorbed, whereas K(+) was leached from the canopies. Beech was more effective in modifying ionic pool from the atmosphere than spruce. This related to H(+) (greater absorption) and Mg(2+) (greater leaching). It has been demonstrated that the results concerning trends in net canopy exchange and produced by the simple method of artificial foliage are comparable to more sophisticated techniques of the measurements. This proves the method to be useful.     

pH-Dependent fate and transport of NTA-complexed cobalt through undisturbed cores of fractured shale saprolite

The codisposal of toxic metals and radionuclides with organic chelating agents has been implicated in the facilitated transport of the inorganic contaminants away from primary waste disposal areas. We investigated the transport of Co(II)NTA through undisturbed cores of fractured shale saprolite. Experiments were conducted across the pH range 4 to 8 by collecting cores from different locations within the weathering profile. Aqueous complexation, adsorption, dissociation and oxidation reactions influenced Co(II)NTA transport. The suite of reaction products identified in column effluent varied with experimental pH. At low pH and in the presence of abundant exchangeable aluminum, Co transport occurred predominantly as the Co2+ ion. At higher pH, Co was transported primarily as Co(II)NTA and the Co(III) species Co(III)(HNTA)2 and Co(III)(IDA)2. The formation of the geochemical oxidation products (Co(III) species) has far reaching implications as these compounds are kinetically and thermodynamically stable, are transported more rapidly than Co(II)NTA, and are resistant to biodegradation. These results demonstrate that natural minerals, in the physical structure encountered naturally, can be more important in the formation of mobile, stable contaminant forms than they can be for the retardation and dissociation of the contaminants.     

Mechanisms of phosphorus solubilisation in a limed soil as a function of pH

Phosphorus (P) quantity-intensity relationships are central to the solubility and release of P from soil to water. Relationships between P extractable by 0.5 M NaHCO extractable P (Olsen P; quantity, Q) and P extractable by 0.01 M CaCl(2) (CaCl(2)-P; possible predictor of soil solution or drainage water P; intensity, I) are curvilinear: above a certain Olsen P concentration, CaCl(2)-P becomes much more soluble than when below it. Aluminium-, Fe- and Ca-P forms (extractable by Olsen's reagent) are thought to control P solubility. Thus, our objectives were to identify P forms in equilibrium with CaCl(2)-P via solubility equilibrium experiments, and the behaviour of CaCl(2)-P in relation to Al, Fe and Ca associated P, determined with 31P high power decoupling magic angle spinning nuclear magnetic resonance spectroscopy (31P HPDec/MAS NMR). Results indicated that two Q-I relationships occurred, one for soils above pH 5.8, and the other for soils below pH 5.8. Above pH 5.8, soils were saturated with respect to hydroxyapatite (Ca(5)(PO(4))(3)OH) and undersaturated with respect to beta-tricalcium phosphate (beta-Ca(3)(PO(4))(2)), while log ion-activity products showed that all soils and pHs were either saturated or in equilibrium with variscite (AlPO(4).2H(2)O) or its amorphous analogue. Using 31P HPDec/MAS NMR, Ca-P was best correlated with CaCl(2)-P in soils above pH 5.8, and with Al-P in soils below this pH. This study demonstrates the value of solid-state NMR in conjunction with wet chemical techniques for the study of labile P and P loss from pasture soils with a wide range of managements.     

Optimizing the molarity of a EDTA washing solution for saturated-soil remediation of trace metal contaminated soils

Three experiments were conducted to optimize the use of ethylenediaminetetraacetic acid (EDTA) for reclaiming urban soils contaminated with trace metals. As compared to Na(2)EDTA, (NH(4))(2)EDTA extracted 60% more Zn and equivalent amounts of Cd, Cu and Pb from a sandy loam. When successively saturating and draining loamy sand columns during a washing cycle, which submerged it once with a (NH(4))(2)EDTA wash and four times with deionised water, the post-wash rinses largely contributed to the total cumulative extraction of Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn. Both the washing solution and the deionised water rinses were added in a 2:5 liquid to soil (L:S) weight ratio. For equal amounts of EDTA, concentrating the washing solution and applying it and the ensuing rinses in a smaller 1:5 L:S weight ratio, instead of a 2:5 L:S weight ratio, increased the extraction of targeted Cr, Cu, Ni, Pb and Zn.     

Application of activated M/ZnO (M = Mn,Co, Ni,Cu, Ag) in photocatalytic degradation of diazo textile coloring dye

Activated ZnO powder has been prepared by procedures involving first its dissolution in nitric acid, then simultaneous treatment by adding NH₄OH and CO₂ bubbling leading to precipitation as Zn(OH)CO₃ (ZH) and further thermal decomposition of ZH at 400 °C. The gas evolution leads to formation of pores and increase in the specific surface area. Chemically activated M/ZnO powders doped with Mn, Co, Ni, Cu, and Ag have been obtained by the impregnation method. The samples have been characterized by ultraviolet-visible (UV-Vis) spectroscopy, diffuse reflectance (DR) UV-Vis, X-ray diffraction (XRD), single point Brunauer–Emmet–Teller (BET), scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS) methods. The experiments have shown that metal-doped activated ZnO powders possess higher photocatalytic activities in oxidative discoloration of model contaminant textile coloring dye Reactive Black 5 in slurry reactor compared to that of the pure ZnO. The XRD and XPS data have shown the presence of defects, nonstoichiometricity implying the formation of solid solutions. Copper-doped (1.5 wt%) activated ZnO (Cu²⁺ replaces Zn²⁺) is outstanding in its photocatalytic performance in discoloration of the dye due to the higher specific surface area and improved charge carrier separation.     

Influence of metal ion on sorption of p-nitrophenol onto sediment in the presence of cetylpyridinium chloride

Heavy metals and surfactants have a significant effect on the sorption of organic contaminants. In this study, batch equilibrium experiments were carried out to investigate the influence of Pb(NO(3))(2) on the sorption of p-nitrophenol (PNP) onto sediments in the presence of cationic surfactant cetylpyridinium chloride (CPC). Results indicated that in the complex system containing PNP, Pb(NO(3))(2) and CPC, the sorption of PNP decreased with increasing concentration of Pb(NO(3))(2) due primarily to competing for adsorption sites. Likewise, partitioning of PNP in adsorbed surfactant layers and micelles decreased with increasing level of Pb(NO(3))(2). Moreover, the influence of different metal ions (Pb(2+), Cd(2+), Zn(2+)) was examined and results indicated that the presence of heavy metals inhibited the sorption of PNP in the order: Pb(2+)>Cd(2+)>Zn(2+). The competitive effect of the heavy metals was in agreement with the hydration energy and hydrated radius. The results are believed to provide a useful insight into describing the transport and fate of PNP in natural environments.     

Evaluation of accelerated dechlorination of p,p'-DDT in acidic paddy soil

The reductive dechlorination and behavior of p,p'-dichlorodiphenyltrichloroethane (p,p'-DDT) was investigated in a paddy soil. Treatment with 5% (w/w) metallic iron (Fe(0)) resulted in sharp decrease of p,p'-DDT, whereas there was no extra effect when 2% (w/w) aluminum sulfate (Al(2)(SO(4))(3)) was added to the Fe(0) treatment. These results suggest that Fe(0) could effectively promote the reductive dechlorination of p,p'-DDT and its metabolites while Al(2)(SO(4))(3) did not show any effect on those processes. Furthermore, p,p'-DDT and its daughter compounds inhibited holistic soil respiration greatly at first but could be metabolized by certain species of indigenous microorganisms after a period of adaptation time in the soil. When treated with Fe(0), the polluted soil produced much less CO(2) while the addition of Al(2)(SO(4))(3) counteracted its negative effect to much extent.     

Leaching of lead metallurgical slag in citric solutions--implications for disposal and weathering in soil environments

Metallurgical slags from primary lead smelting were submitted to a 30-day batch leaching procedure in 20 and 8 mM citric solutions in order to determine the kinetics of release of Pb, Cu, Zn and As. The experiment was coupled with the PHREEQC-2 speciation-solubility modelling and mineralogical study of newly formed products (SEM/EDS, XRD, TEM/EDS and Raman spectrometry). A strong scavenging of metals and metalloids from the 8 mM citric leachate was observed due to the formation of newly formed products. The secondary precipitate consisted of well-developed calcite (CaCO3) crystals and amorphous organo-mineral matrix composed of hydrous ferric oxides and amorphous SiO2. Metals (Pb, Zn, Cu) and arsenic released into the solution were subsequently bound onto the newly formed product (adsorption on oxides) or trapped within the calcite structure (Zn, Mn). Similar scavenging mechanism can be taken into account in real soil systems with lower concentration of citric acid. Then, the covering of slag dumps with a thick soil layer and subsequent re-vegetation might be a possible scenario for slag management on some metallurgical sites.     

Influence of acidification of CCB (Cu/Cr/B) impregnated wood on fungal copper tolerance

Copper tolerant fungi are known for more than 60 years but the complete mechanisms of copper tolerance by these fungi are still not fully understood. Copper tolerance has previously been linked to oxalic acid excretion by copper tolerant brown rot fungi. The oxalic acid then reacts with copper in the wood to form an insoluble and therefore less toxic copper oxalate. It has been suggested that copper tolerance could be due to lowering of the pH of the medium rather than the low solubility of copper oxalate. In order to elucidate this presumption, copper/chromium/boron (CCB) treated wood specimens were acidified with organic (oxalic, acetic, lactic, formic) and inorganic (sulphuric) acids and exposed to copper tolerant (Antrodia vaillantii, Leucogyrophana pinastri) and copper sensitive (Poria monticola, Gloeophyllum trabeum) brown rot fungal strains according to the mini block procedure. After eight weeks of exposure, the wood specimens were isolated and their mass losses determined. Additionally, electron paramagnetic resonance (EPR) measurements on the exposed specimens were performed. The EPR spectra of the specimens decayed by A. vaillantii were very similar to the EPR spectra of the specimens acidified with oxalic acid. Additionally, acidification of the CCB impregnated specimens made them significantly more susceptible to decay by both the copper tolerant and copper sensitive brown rot fungi.